diff --git a/BlitzWolf-SHP6.md b/BlitzWolf-SHP6.md
new file mode 100644
index 00000000..41d3a04e
--- /dev/null
+++ b/BlitzWolf-SHP6.md
@@ -0,0 +1,90 @@
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-01.jpg|BlitzWolf SHP6]]
+
+* Product page: [BlitzWolf® BW-SHP6 - 2300W EU WIFI Smart Socket](https://www.blitzwolf.com/2300W-EU-WIFI-Smart-Socket-p-300.html)
+
+## Serial Connection
+
+Please see the [Hardware Preparation](https://github.com/arendst/Sonoff-Tasmota/wiki/Hardware-Preparation) page for general instructions.
+
+### Step 1
+**Disconnect device from power source!**
+
+### Step 2
+Remove one screw on the back of the device. **PH1** screwdriver required.
+
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-02.jpg|One PH1 Screw]]
+
+### Step 3
+Undo 2 screws. **PH1** screwdriver required.
+Disconnect antenna.
+
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-03.jpg|Two PH1 Screws and antenna]]
+
+### Step 4
+Carefully remove PCB from casing for easier soldering.
+* Don't stress antenna cable too much.
+* Don't lose metal tube.
+
+### Step 5
+Solder cables to the ESP Pins.
+
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-04.jpg|Solder points]]
+
+### Step 6
+Connect serial adapter and make a shortwire between Pin IO0 and GND during startup (for entering flashmode).
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-05.jpg|Soldered cables]]
+
+### Step 7
+Flash Tasmota.
+
+## Other photos
+
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-06.jpg|Left side]]
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-07.jpg|Right side]]
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-08.jpg|Back]]
+[[https://raw.githubusercontent.com/wiki/RTurala/Sonoff-Tasmota/images/BlitzWolf-SHP6/BW-SHP6-09.jpg|All parts]]
+
+## Home Assistant configuration 
+
+configuration.yaml
+```
+switch:
+  - platform: mqtt
+    name: "Blitzwolf"
+    state_topic: "stat/blitzwolf/POWER"
+    command_topic: "cmnd/blitzwolf/POWER"
+    payload_on: "ON"
+    payload_off: "OFF"
+    retain: false
+  
+sensor:
+  - platform: mqtt
+    name: "Blitzwolf Energy Today"
+    state_topic: "tele/blitzwolf/SENSOR"
+    value_template: '{{ value_json["ENERGY"]["Today"] }}'
+    unit_of_measurement: "kWh"
+  - platform: mqtt
+    name: "Blitzwolf Energy Yesterday"
+    state_topic: "tele/blitzwolf/SENSOR"
+    value_template: '{{ value_json["ENERGY"]["Yesterday"] }}'
+    unit_of_measurement: "kWh"
+  - platform: mqtt
+    name: "Blitzwolf Energy Total"
+    state_topic: "tele/blitzwolf/SENSOR"
+    value_template: '{{ value_json["ENERGY"]["Total"] }}'
+    unit_of_measurement: "kWh"
+  - platform: mqtt
+    name: "Blitzwolf Power"
+    state_topic: "tele/blitzwolf/SENSOR"
+    value_template: '{{ value_json["ENERGY"]["Power"] }}'
+    unit_of_measurement: "W"
+  - platform: mqtt
+    name: "Blitzwolf Voltage"
+    state_topic: "tele/blitzwolf/SENSOR"
+    value_template: '{{ value_json["ENERGY"]["Voltage"] }}'
+    unit_of_measurement: "V"
+  - platform: mqtt
+    name: "Blitzwolf Power Factor"
+    state_topic: "tele/blitzwolf/SENSOR"
+    value_template: '{{ value_json["ENERGY"]["Factor"] }}'
+```