diff --git a/Wemos-D1-Mini-and-HC-SR501-PIR-Motion-Sensor.md b/Wemos-D1-Mini-and-HC-SR501-PIR-Motion-Sensor.md
index 3c2c3ffd..503a2274 100644
--- a/Wemos-D1-Mini-and-HC-SR501-PIR-Motion-Sensor.md
+++ b/Wemos-D1-Mini-and-HC-SR501-PIR-Motion-Sensor.md
@@ -35,6 +35,8 @@ Configure the module as described above but omit the GPIO12 = Relay1 setting (le
 
 Then go to console in the webinterface and add a rule that sends a MQTT message if the PIR is triggered:
 
+    Switchmode1 1
+    Switchtopic 0
     Rule1 on switch1#state=1 do publish stat/sonoff/PIRSENSOR1 ON endon on switch1#state=0 do publish stat/sonoff/PIRSENSOR1 OFF endon
     Rule1 4
     Rule1 1
@@ -43,6 +45,8 @@ Note: the webinterface (obviously) won't show the relay state as "ON" or "OFF" a
 
 If you want to attach a second PIR to another GPIO (e.g. D1 / GPIO5), configure it as Switch2 and add another rule via console:
 
+    Switchmode1 1
+    Switchtopic 0
     Rule2 on switch2#state=1 do publish stat/sonoff/PIRSENSOR2 ON endon on switch2#state=0 do publish stat/sonoff/PIRSENSOR2 OFF endon
     Rule2 4
     Rule2 1
\ No newline at end of file