diff --git a/Sonoff-DIY.md b/Sonoff-DIY.md
index 159272b3..094b2b92 100644
--- a/Sonoff-DIY.md
+++ b/Sonoff-DIY.md
@@ -30,7 +30,7 @@ As Sonoff DIY is enabled by connecting GPIO16 to GND it may well be possible tha
 - Select `Firmware flash` (`Brush machine` on newer versions of the tool)
 - Select a Tasmota binary (e.g., [`sonoff-basic.bin`](http://thehackbox.org/tasmota/020300/sonoff-basic.bin)) or your own self-compiled binary. It must fit in the available free program space. You can use the 2.3.0 Core for this initial flash since it has the smallest program memory footprint. _**Do NOT use the sonoff-minimal pre-compiled binary**_ as it does not allow you to change any settings.
   
-  >You may wish to [compile your own firmware](https://github.com/arendst/Sonoff-Tasmota/wiki/Compiling-Tasmota-on-Gitpod) with all the features you require and disabling the features you do not. This will usually result in a "full" binary that is under 500k. You can use the resulting firmware file instead of the pre-compiled `sonoff-basic.bin`. This way you will not have to perform the secondary OTA firmware update. _**Nevertheless, it is still recommended that you perform a `Reset 5` immediately after the Sonoff DIY flash completes.**_  
+  > You may wish to [compile your own firmware](https://github.com/arendst/Sonoff-Tasmota/wiki/Compiling-Tasmota-on-Gitpod) with all the features you require and disabling the features you do not. This will usually result in a "full" binary that is under 500k. You can use the resulting firmware file instead of the pre-compiled `sonoff-basic.bin`.  
 - Select the device in the flash pop-up and then select OK
 - Tasmota will be uploaded and started