From 8a81a1a0f7978e8ec1310507795e2783c7c2b9aa Mon Sep 17 00:00:00 2001
From: Michael Ingraham <34340210+meingraham@users.noreply.github.com>
Date: Wed, 9 Oct 2019 13:00:20 -0400
Subject: [PATCH] DHCP/NTP

---
 FAQ.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/FAQ.md b/FAQ.md
index 0896ebb3..d7e155cd 100644
--- a/FAQ.md
+++ b/FAQ.md
@@ -282,7 +282,7 @@ Your vanilla `sonoff.bin` doesn't have complete sensor support. Make sure you've
 ### Timers trigger at the wrong time
 Check the log in the web UI Console to see if the device's time is set correctly. There are two elements to setting the time: 1. obtaining the UTC time, and, 2. local Daylight Saving Time policies.  
 
-Check the information about your router's features. If the router provides an NTP server, be sure to configure it properly. If the Tasmota device receives its IP address via DHCP from the router, Tasmota will request its time sync from the router's time server. This is managed by the Arduino core, not Tasmota. Therefore, if the NTP server on the router is not configured, or configured improperly, the time on the Tasmota device could be wrong. If the router does not have a time server, this is not the problem.  
+Check the information about your router's features. If the router provides an NTP server, be sure to configure it properly. If the Tasmota device receives its IP address via DHCP from the router, Tasmota will request its time sync from the router's time server. This is managed by the Arduino core, not Tasmota ([\#5283](https://github.com/arendst/Sonoff-Tasmota/issues/5283#issuecomment-466888846)). Therefore, if the NTP server on the router is not configured, or configured improperly, the time on the Tasmota device could be wrong. If the router does not have a time server, this is not the problem.  
 
 If you cannot configure your router's time server to the correct time (e.g., a router provided by your ISP with no access to administration functions), you will need to set a static IP address on the Tasmota device. If the device does not request its address from a DHCP server (i.e., uses a static IP address), the time sync request is forced to `NTPSERVER1`. If can't connect, it tries `NTPSERVER2`. And finally `NTPSERVER3`. Ensure that these parameters are set appropriately and that the device can reach at least one of these time servers. You may want to consider setting up an NTP server locally. As long as the computer is able to set its time at some point from an Internet time server, this computer can serve as an NTP server for your Tasmota device(s). This can be the same computer that hosts your MQTT broker or home automation hub.