From 8af4e81ea434fc5cc5aa72619238c046aa2a110e Mon Sep 17 00:00:00 2001
From: Michael Ingraham <34340210+meingraham@users.noreply.github.com>
Date: Wed, 16 Oct 2019 18:43:28 -0400
Subject: [PATCH] Updated Zigbee (markdown)
---
Zigbee.md | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/Zigbee.md b/Zigbee.md
index 9044e151..e991bb5e 100644
--- a/Zigbee.md
+++ b/Zigbee.md
@@ -64,13 +64,13 @@ Once the firmware upload completes, retain the serial interface connections (3.3
### B. Connect the CC2530 and the ESP82xx
The DL-20 Zigbee module has a 5-pin 1.27mm pitch unpopulated header with 0.6mm througholes. For flashing any of the Zigbee modules, you need the following connections:
-ESP
Device|
CC2530|DL-20
Pin Location
-:--:|:--:|:--:
-GPIO12|CC_DD
(A.K.A. P2_1 or Debug Data)|1
-GPIO4|CC_DC
(A.K.A. P2_2 or Debug Clock)|2
-Vcc|Vcc|3
-GPIO5|CC_RST|4
-GND|GND|5
+ESP
Pin|D1 Mini
NodeMCU|CC2530
Pin|DL-20 J2
Pin Location
+:--:|:--:|:--:|:--:
+GPIO12|D6|CC_DD
(A.K.A. P2_1 or Debug Data)|1
+GPIO4|D2|CC_DC
(A.K.A. P2_2 or Debug Clock)|2
+Vcc|3.3v|Vcc|3
+GPIO5|D1|CC_RST|4
+GND|GND|GND|5
**DL-20 Flashing Jumpers**
Insert alternating male Dupont jumpers; one jumper on one side, the next one on other side. This allows the pins to provide the friction themselves to maintain contact and remain firmly in place. You only need DD, DC, and RST (a fourth jumper is shown which is used to keep the RST jumper in place). Vcc and GND are available on the main serial interface pins.