diff --git a/Sonoff-RF.md b/Sonoff-RF.md
index 1b73d765..b944a927 100644
--- a/Sonoff-RF.md
+++ b/Sonoff-RF.md
@@ -6,9 +6,7 @@ The Sonoff RF needs some tweaking as the connection needed during programming be
 
 <img alt="S20 Smart Socket" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffrffix.jpg" width="230" align="right" />
 
-The R2 V1.0 version of the Sonoff RF uses an ESP8285 which is covered by a horizontally orientated RF expansion board. Entering flash ready mode can be achieved by grounding K_P (which is connected to GPIO0) to the neighbouring GND pin on the RF board during power on.
-
-https://imgur.com/a/rJ3zGQQ
+The R2 V1.0 version of the Sonoff RF uses an ESP8285 which is covered by a horizontally orientated RF expansion board. Entering flash ready mode can be achieved by grounding K_P (which is connected to GPIO0) to the neighbouring GND pin on the RF board during power on. https://imgur.com/a/rJ3zGQQ
 
 Pairing the iTead RF remote controller is the same as with the original iTead software:
 - two short button presses will blink a red led shortly and start RF signal recognition. Three longer blinks signal RF reception.