From 8d7cc6794a4a1e8d7a3a9ac2f0e290646c2c3fc9 Mon Sep 17 00:00:00 2001 From: pedro1977 <44186504+pedro1977@users.noreply.github.com> Date: Sat, 20 Oct 2018 14:13:48 +1000 Subject: [PATCH] Updated Sonoff RF (markdown) --- Sonoff-RF.md | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/Sonoff-RF.md b/Sonoff-RF.md index 1b73d765..b944a927 100644 --- a/Sonoff-RF.md +++ b/Sonoff-RF.md @@ -6,9 +6,7 @@ The Sonoff RF needs some tweaking as the connection needed during programming be S20 Smart Socket -The R2 V1.0 version of the Sonoff RF uses an ESP8285 which is covered by a horizontally orientated RF expansion board. Entering flash ready mode can be achieved by grounding K_P (which is connected to GPIO0) to the neighbouring GND pin on the RF board during power on. - -https://imgur.com/a/rJ3zGQQ +The R2 V1.0 version of the Sonoff RF uses an ESP8285 which is covered by a horizontally orientated RF expansion board. Entering flash ready mode can be achieved by grounding K_P (which is connected to GPIO0) to the neighbouring GND pin on the RF board during power on. https://imgur.com/a/rJ3zGQQ Pairing the iTead RF remote controller is the same as with the original iTead software: - two short button presses will blink a red led shortly and start RF signal recognition. Three longer blinks signal RF reception.