From 9075ad1bedb135d00f689c0847c97b28630268bc Mon Sep 17 00:00:00 2001 From: Wayne Manion Date: Wed, 24 Oct 2018 20:26:28 -0500 Subject: [PATCH] Created KMC 70008 light switch (markdown) --- KMC-70008-light-switch.md | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 KMC-70008-light-switch.md diff --git a/KMC-70008-light-switch.md b/KMC-70008-light-switch.md new file mode 100644 index 00000000..bb18da8b --- /dev/null +++ b/KMC-70008-light-switch.md @@ -0,0 +1,13 @@ +Amazon link: https://www.amazon.com/KMC-Wireless-Lighting-Compatible-Assistant/dp/B078HFR27T/ref=sr_1_3?ie=UTF8&qid=1540418560&sr=8-3&keywords=kmc+light+switch + +Pictures: +https://imgur.com/tvMPYVy +https://imgur.com/xavv6mO +https://imgur.com/QnzGWli +https://imgur.com/4e8mR7g + +I didn't see any place to add pin headers, but the module has the usual ESP-12 pin layout, so I soldered right to the pins. You can skip soldering to GPIO 0 and just hold the button down when booting the device to get into flash mode. + +The button is on GPIO 0, the relay and the white LED are on GPIO 14, the blue LED is on GPIO 13. When the blue LED on GPIO 13 is set to LED1i the white light shines when the relay is off and the blue light illuminates then the relay is on. + +Additional note: the device kept rebooting back to defaults when I was stumbling through the setup process. Once I set the device to Generic it stopped rebooting on its own.