From 9d042b9f5a372bbd1e6f101466dc411546d2b54c Mon Sep 17 00:00:00 2001
From: Michael Ingraham <34340210+meingraham@users.noreply.github.com>
Date: Sat, 13 Jul 2019 14:20:54 -0400
Subject: [PATCH] Updated ERC309 Kinetic Switch (markdown)

---
 ERC309-Kinetic-Switch.md | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/ERC309-Kinetic-Switch.md b/ERC309-Kinetic-Switch.md
index 9db969e4..1097885c 100644
--- a/ERC309-Kinetic-Switch.md
+++ b/ERC309-Kinetic-Switch.md
@@ -21,9 +21,6 @@ _If power on/off works, but dimming doesn't, you probably haven't set the correc
 
 #### Flashing
 
-
-[Flashing and Setup Video Guide](https://www.youtube.com/watch?v=fyxxk2NrKG8)
-
 This device uses a Tuya TYWE3S Wi-Fi PCB module.  An easy soldering method is to take several Dupont style jumper wires, cut one end off, and apply a bit of solder to each stripped end.  This will keep the wire flexible and prevent any circuit board pads from ripping off.  Apply a bit of solder to each pad necessary to flash (double check your pin-outs).  Once the wire and pad have solder simply put the two together and apply a bit of heat and they will join together.  
 
 ![tywe3s_3](https://user-images.githubusercontent.com/3240875/43324698-669affd6-917a-11e8-8e06-c800741bfb68.png)