From a6602d92d927d2b2c0b8744d8808e5f19ab7810d Mon Sep 17 00:00:00 2001
From: evaluationevaluation
 <35542221+evaluationevaluation@users.noreply.github.com>
Date: Mon, 25 Feb 2019 20:42:08 +0100
Subject: [PATCH] Created Slitinto NX-SP202 (markdown)

---
 Slitinto-NX-SP202.md | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Slitinto-NX-SP202.md

diff --git a/Slitinto-NX-SP202.md b/Slitinto-NX-SP202.md
new file mode 100644
index 00000000..892a913a
--- /dev/null
+++ b/Slitinto-NX-SP202.md
@@ -0,0 +1,41 @@
+***indirectly supported as configuration of Digoo NX-SP202 seems to work fine***
+
+Device can switch 2 individual plugs. It has a builtin metering sensor which measures power consumption of the sum of both.
+
+My 2 devices I bought at Amazon have ROHS and CE signs and are officially valid for a maximum of 16A.
+
+You can buy it at [Amazon](https://www.amazon.de/dp/B07LC4M1BK)
+
+According to the template configuration the device seems to be compatible with [Digoo NX-SP202](https://de.aliexpress.com/item/DIGOO-NX-SP202-Dual-EU-Stecker-Smart-WIFI-Buchse-Individuelle-Steuerbar-Energie-Monitor-Fernbedienung-Timing-Smart/32952717922.html)
+
+## Configuration
+Currently Slitinto is not present as separate module but DIGOO NX-SP202 seems to work.
+I had to adjust voltage and current with the following commands in the console
+* command VoltageSet 233 // measured with a multimeter
+* command CurrentSet 171 // known milliampere of my reference (here lightbulb of 40watts)
+This calibration is potentially individual for every device so I would suggest to calibrate it with a known power consuming device like a good old light bulb where the wattage is well known.
+
+
+# Flashing
+## Disassembly
+The device has no screws but disassembling as not needed as you can flash it OTA using tuya-convert.
+Nevertheless one user described a method to "crack" it using a rubber hammer and then glue it together again with no visible defects.
+
+## Pinout
+Not known.
+
+## Procedure
+[Here](https://github.com/arendst/Sonoff-Tasmota/issues/3950) is described how to crack the device but also how to flash it OTA.
+
+# Miscellaneous
+I use metering capable devices to observe the power consumption and execute rule based behaviour on base of the consumption values.
+
+i.e.: if the power consumption is lower than 10W for 30min (checked every 60 seconds) then switch off.
+
+My script for this looks like this:
+* rule1 on Energy#Power>10 do backlog ruletimer1 1800; ruletimer2 60; rule1 off; endon
+* rule2 on rules#timer=1 do power2 off endon
+* rule3 on rules#timer=2 do rule1 on endon
+* rule1 on
+* rule2 on
+* rule3 on
\ No newline at end of file