From a956301a99a97af57993a22e2ec0aea5687a1878 Mon Sep 17 00:00:00 2001
From: pedro1977 <44186504+pedro1977@users.noreply.github.com>
Date: Sat, 20 Oct 2018 14:12:28 +1000
Subject: [PATCH] Updated Sonoff RF (markdown)

---
 Sonoff-RF.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Sonoff-RF.md b/Sonoff-RF.md
index 4ed268c5..c2b276c7 100644
--- a/Sonoff-RF.md
+++ b/Sonoff-RF.md
@@ -8,7 +8,7 @@ The Sonoff RF needs some tweaking as the connection needed during programming be
 
 The R2 V1.0 version of the Sonoff RF uses an ESP8285 which is covered by a horizontally orientated RF expansion board. Entering flash ready mode can be achieved by grounding K_P (which is connected to GPIO0) to the neighbouring GND pin on the RF board during power on.
 
-<img alt="Sonoff RF R2 GPIO0 Contact" src="https://imgur.com/a/rJ3zGQQ" />
+<img alt="Sonoff RF R2 GPIO0 Contact" src="https://imgur.com/a/rJ3zGQQ">
 
 Pairing the iTead RF remote controller is the same as with the original iTead software:
 - two short button presses will blink a red led shortly and start RF signal recognition. Three longer blinks signal RF reception.