From afe4efa2aa73a254388ced71026cb568b8424774 Mon Sep 17 00:00:00 2001 From: so3n Date: Wed, 13 Feb 2019 23:59:06 +1100 Subject: [PATCH] Updated Mirabella Genio Bulb (markdown) --- Mirabella-Genio-Bulb.md | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/Mirabella-Genio-Bulb.md b/Mirabella-Genio-Bulb.md index 9503ae58..76d807dd 100644 --- a/Mirabella-Genio-Bulb.md +++ b/Mirabella-Genio-Bulb.md @@ -87,39 +87,27 @@ Or set manually from the web interface: ### Tunable warm/cool white bulbs I based these settings on the RGBW settings. I would have thought PWM1-3 were redundant, but have only had it work with all of these assigned as per below. The bulb is then tunable, with a brightness slider and a cool/warm slider. -D3 GPIO0 => None +* Module type => Generic +* D2 GPIO4 => PWM1 (37) +* D1 GPIO5 => PWM4 (40) +* D6 GPIO12 => PWM2 (38) +* D7 GPIO13 => PWM5 (41) +* D5 GPIO14 => PWM3 (39) -TX GPIO1 => None - -D4 GPIO2 => None - -RX GPIO3 => None - -D2 GPIO4 => PWM1 (37) - -D1 GPIO5 => PWM4 (40) - -D6 GPIO12 => PWM2 (38) - -D7 GPIO13 => PWM5 (41) - -D5 GPIO14 => PWM3 (39) - -D8 GPIO15 => None - -D0 GPIO16 => None +![config](https://user-images.githubusercontent.com/29367905/52713078-80b97000-2fea-11e9-941b-2970304f1edf.PNG) ### RGBW colour bulbs -![Mirabella RGBW Bulb Tasmota Settings](https://i.ibb.co/BBM0Xyw/mirabella-genio-rgbw-tasmota-settings.png) - * Module type = Generic * D2 GPIO4 = PWM1 37 = Red * D6 GPIO12 = PWM2 38 = Green * D5 GPIO14 = PWM3 39 = Blue * D1 GPIO5 = PWM4 = White +![Mirabella RGBW Bulb Tasmota Settings](https://i.ibb.co/BBM0Xyw/mirabella-genio-rgbw-tasmota-settings.png) + + ## Re-assembly