diff --git a/Initial-Configuration.md b/Initial-Configuration.md
index a5f29a0b..dda904bf 100644
--- a/Initial-Configuration.md
+++ b/Initial-Configuration.md
@@ -5,16 +5,17 @@ You've successfully flashed your device with a downloaded binary of Tasmota but
Tasmota provides a wireless access point for easy Wi-Fi configuration.
>*If you flashed using Tuya Convert this is the only option to set up your device.*
-
+
Connect your device to a power source and grab your smartphone (or tablet or laptop or any other web and Wi-Fi capable device). Search for a Wi-Fi AP named **tasmota-xxxx** (where **x** is a number) and connect to it. _In this example the Wi-Fi AP is named **tasmota-7718**._ When it connects to the network, you may get a warning that there is no Internet connection and be prompted to connect to a different network. _Do not allow the mobile device to select a different network_.
> *Wi-Fi manager server is active for only 3 minutes. If you miss the window you might have to disconnect your device from power and reconnect.*
-
+
After you have connected to the Tasmota Wi-Fi AP, open http://192.168.4.1 in a web browser on the smartphone (or whatever device you used).
-Some devices might prompt you to *sign in to Wi-Fi network* which should also open the above address.
+Depending on the phone, it will take you to the Tasmota configuration page automatically, or you will get a prompt to *sign in to Wi-Fi network* or *authorize*. Tapping on the AP name should also open the configuration page.
-
+
At this page you can have Tasmota scan for available Wi-Fi networks. Select the right network from the list or enter the following:
**AP1 SSid** - your Wi-Fi network name