diff --git a/Templates.md b/Templates.md
index b785691b..46380bf8 100644
--- a/Templates.md
+++ b/Templates.md
@@ -194,7 +194,7 @@ The FLAG value is an 8-bit mask where each bit controls a feature. Add FLAG valu
 FLAG | Mask     | Feature description
 -----|----------|------------------------------
    0 | xxxxxxxx | No features
-<a id="ADC0">	</a>    1 | xxxxxxx1 | Use Analog0 (ADC0) as an input if USE_ADC_VCC, defined in ``my_user_config.h``, is disabled<BR><BR>Selecting ADC0 allows input of an analog signal through the ADC0 (A.K.A. A0) ESP8266 input (pin 6). ADC0 will be reported in telemetry messages as well as in the web UI. It can also be used as a [trigger](Rules#adc0) in [rules](Rules).<BR><BR>**Check your Wi-Fi module**. The ESP8266 A0 pin supports a maximum voltage of 1.0V. Many newer Wi-Fi modules have an on-board voltage divider to support a higher A0 input voltage range (typically in the range between 0 and 3.3 volts). You may need to use a an external voltage divider to ensure your input voltage is in the right range.
+<a id="ADC0">	</a>    1 | xxxxxxx1 | Use Analog0 (ADC0) as an input if USE_ADC_VCC, defined in ``my_user_config.h``, is disabled<BR><BR>Selecting ADC0 allows input of an analog signal through the ADC0 (A.K.A. A0) ESP8266 input (pin 6). ADC0 will be reported in telemetry messages as well as in the web UI. It can also be used as a [trigger](Rules#adc0) in [rules](Rules).<BR><BR>**Check your Wi-Fi module**. The [ESP8266 A0 pin](https://arduino-esp8266.readthedocs.io/en/latest/reference.html#analog-input) supports a maximum voltage of 1.0V. Many newer Wi-Fi modules have an on-board voltage divider to support a higher A0 input voltage range (typically in the range between 0 and 3.3 volts). You may need to use a an external voltage divider to ensure your input voltage is in the right range.
    2 | xxxxxx1x | Not used
    4 | xxxxx1xx | Not used
    8 | xxxx1xxx | Not used