diff --git a/meross-MSS425.md b/meross-MSS425.md
new file mode 100644
index 00000000..be9b229d
--- /dev/null
+++ b/meross-MSS425.md
@@ -0,0 +1,15 @@
+# meross Power Strip
+The ESP module is mounted on the side vertically on board. It's another Tuya TYWE3S, 1MB. For more information on the Tuya TYWE3S, see [this page](https://github.com/arendst/Sonoff-Tasmota/wiki/TYWE3S)
+
+![meross guts picture](https://raw.githubusercontent.com/hank/tasmota-contrib/master/2018-10-27-163303.jpg)
+
+To open, 4 screws are under the soft foot pads. They take a size 2.0 triangle bit; make sure you have a large collection of small screwdriver bits around.
+
+The programming header is directly on the Tuya module and is silkscreened with the labels for the pins. Solder onto those and program just like any other Tuya. I burned on the generic tasmota release and set it up like so:
+
+![tasmota config](https://raw.githubusercontent.com/hank/tasmota-contrib/master/Screenshot%20from%202018-10-27%2019-05-32.png)
+
+Relays 1-3 are the AC plugs
+Relays 4,5 are the USBs
+The button only turns off the first AC by default, but you could write rules to do whatever you want.
+