From c9ee31f1edfa55fb20b1f579826094fe9fe6c09b Mon Sep 17 00:00:00 2001 From: Adrian Scillato <35405447+ascillato@users.noreply.github.com> Date: Wed, 7 Aug 2019 13:08:22 -0300 Subject: [PATCH] Updated Shelly 1PM (markdown) --- Shelly-1PM.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Shelly-1PM.md b/Shelly-1PM.md index a8476403..02dc1993 100644 --- a/Shelly-1PM.md +++ b/Shelly-1PM.md @@ -7,11 +7,11 @@ The Shelly 1PM is supported from Tasmota 6.5.0.10 using a template. ## ⚠️️Special Shelly Attention⚠️️ -**Do not connect AC power and the serial connection at the same time** -The GND connection of the Shelly has a 50% chance of being connected to the live AC wire. Connecting serial with your PC will fry your PC. +**DO NOT CONNECT ANYTHING TO ANY GPIOs OF THESE DEVICES!!! (No sensors, no switches, nothing)
+The GPIOs on the Shelly are connected to AC power!** Only use a Shelly as designed. -**Do not connect any additional sensors to serial pins.** -It can at least destroy your Shelly! +**Do not connect AC power and the serial connection at the same time** +The GND connection of the Shelly is connected to the live AC wire. Connecting serial with your PC will fry your PC. **Check the correct jumper position before connecting AC power to Shelly 1.** If the jumper is set to 12V you will destroy your Shelly!