From cbd39801d6c6ba3d918a9946c834639e2b7b77bc Mon Sep 17 00:00:00 2001 From: Rob de Jonge Date: Sat, 10 Nov 2018 14:35:52 +0700 Subject: [PATCH] Updated CNSKOU CNSANKOU wall switches (markdown) --- CNSKOU---CNSANKOU-wall-switches.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/CNSKOU---CNSANKOU-wall-switches.md b/CNSKOU---CNSANKOU-wall-switches.md index b65968a0..ed8aec32 100644 --- a/CNSKOU---CNSANKOU-wall-switches.md +++ b/CNSKOU---CNSANKOU-wall-switches.md @@ -1,10 +1,10 @@ -# General +## General These CNSKOU / CNSANKOU wall switches (Chinese Sonoff clones) are sold on AliExpress and have a neutral design. They come in 1, 2 and 3 circuits and are easily mounted replacing your old wall switches. It measures 118mm wide by 72mm high, irrespective of the number of buttons, although it is also available in 86x86mm. The tempered glass front plate is available in white, black and gold colors. Despite it being advertised as a 'US' device, it will handle 90-250V AC input at 50/60Hz and is said to switch up to 10A per circuit. The same design is also available for use with a RF-remote, or as a traditional wall switch. There is a backlight indicator behind each button, which subtly shows green when the circuit is live and red when it is not. When physically pushing the button, there is an audio feedback. The one interesting for Tasmota is of course the WiFi version, which connects to 2.4GHz networks, up to 802.11n. The switch comes pre-loaded with ITEAD software and works well with the EWeLink app. -# Inside +## Inside When opening the package, easily done by turning a screwdriver under the two plastic lips at the lower side of the switch, the first thing we see are the capacitive touch sensors mounted on the back of the low-voltage board. @@ -12,7 +12,7 @@ The low-voltage board is connected through a 14-pin connector to the mains board The mains-voltage board contains the mains connection points, a TI ULN2003A relay driver and 1-3 relays and a tiny little board containing a power supply for the low-voltage bits. -# Flashing +## Flashing The most interesting part is of course how we flash this device with Tasmota. To do this, do not connect the device to mains power and carefully remove the low-voltage board as this is all you'll need.