From d63f36280533f183b4f8a0dd52e3830ba05518d3 Mon Sep 17 00:00:00 2001 From: Michael Ingraham <34340210+meingraham@users.noreply.github.com> Date: Fri, 8 Feb 2019 17:25:34 -0500 Subject: [PATCH] Updated Commands (markdown) --- Commands.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Commands.md b/Commands.md index 0b92fd5a..cbb8257a 100644 --- a/Commands.md +++ b/Commands.md @@ -656,10 +656,10 @@ SetOption18 | 1 / on | Enable signal light currently used with CO2 senso SetOption19 | 1 / on | Enable Home Assistant automatic discovery SetOption20 | 1 / on | Enable changing Dimmer value without turning power on SetOption21 | 1 / on | Enable reporting Energy usage while power off -SetOption22 | | Reserved -SetOption23 | | Reserved +SetOption22 | | **Reserved** ("MQTT Serial") +SetOption23 | | **Reserved** ("Rules Enabled") SetOption24 | 0 / off | (default) 0 to show pressure in hPa, 1 to show pressure in mmHg -SetOption25 | | Reserved +SetOption25 | | **Reserved** ("KNX Enabled") SetOption26 | 0 / off | (default) Keep using POWER without postfix for single power devices SetOption26 | 1 / on | Add postfix to all POWER messages SetOption28 | | Enable hex (0) or decimal (1) RF signal receive data representation @@ -670,7 +670,7 @@ SetOption31 | 1 / on | Disable Wi-Fi LED status information blinking (bl SetOption32 | 1..100 | Set key hold time from 0.1 to 10 seconds SetOption33 | 1..250 | Set Sonoff Pow Max_Power_Retry from 1 to 250 SetOption34 | 0..255 | Set Tuya dimmer device id from 0 to 255 -SetOption36 | | Reserved | 6.4.1.13 +SetOption36 | | **Reserved** (Boot loop control) | 6.4.1.13 SetOption50 | | Same as Timers SetOption51 | | Enable to view extra pins for ESP8285 in Module Config (Do not use this on ESP8266 devices) SetOption52 | 1 / on | Append time offset from UTC to JSON messages | 6.2.1.2