From d7b86d0d4c661c0f50d396b86fec31f61260dad0 Mon Sep 17 00:00:00 2001
From: Robin Clarke <robin@robinclarke.net>
Date: Tue, 15 Jan 2019 09:49:47 +0100
Subject: [PATCH] Added images with pinouts annotated.

---
 Sonoff-B1-and-B1-R2.md | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Sonoff-B1-and-B1-R2.md b/Sonoff-B1-and-B1-R2.md
index 0d02e069..19f70b68 100644
--- a/Sonoff-B1-and-B1-R2.md
+++ b/Sonoff-B1-and-B1-R2.md
@@ -11,7 +11,10 @@ Please see the [Hardware Preparation](https://github.com/arendst/Sonoff-Tasmota/
 
 As always, you need to access the serial interface. First pop up the top part of the bulb with controlled force. The PCB as shown in the image will become visible.
 
-<img alt="Sonoff B1 PCB" src="https://user-images.githubusercontent.com/2870104/30506986-b5be2882-9a80-11e7-849a-ccd65dd8a1a6.png" width="60%" align="right" />
+
+<img alt="Sonoff B1 PCB" src="https://user-images.githubusercontent.com/174291/51168785-8f591e00-18aa-11e9-897e-686243da292a.png" width="60%" align="right" />
+
+<img alt="Sonoff B1 PCB" src="https://user-images.githubusercontent.com/174291/51168788-91bb7800-18aa-11e9-9056-202275e47840.png" width="60%" align="right" />
 
 The **four serial pins** (3V3, Rx, Tx, GND) as well as the GPIO0 signal line are available as test points and clearly marked. Solder wires to those or use pogo pins as you prefer.