From dbec0a2c48f94818ade80206481fca0df656b123 Mon Sep 17 00:00:00 2001
From: finity69x2 <32221243+finity69x2@users.noreply.github.com>
Date: Fri, 13 Sep 2019 11:57:20 -0400
Subject: [PATCH] Updated Sonoff iFan03 (markdown)

---
 Sonoff-iFan03.md | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Sonoff-iFan03.md b/Sonoff-iFan03.md
index 395e2da8..cd0b4bf2 100644
--- a/Sonoff-iFan03.md
+++ b/Sonoff-iFan03.md
@@ -10,7 +10,7 @@ To flash the latest `sonoff.bin` file to the iFan03:
 1. Connect your serial flashing device pins to the iFan03 (for connection locations see the pin out on the left hand side of the picture below).  
    ![](https://github.com/tim-dcl/BRUH3-Home-Assistant-Configuration/blob/master/IMG_20190817_155847511_HDR.jpg)
 
-2. Once you are ready to flash your device then hold down the large white tipped button on the iFan03 while connecting the serial adapter flashing device to your computer. This will power the adapter and the iFan03, you can release the button once it's powered up and the lights have flashed.
+2. Once you are ready to flash your device then hold down the large white tipped button on the iFan03 while connecting the serial adapter flashing device to your computer. This will power the adapter and the iFan03, you can release the button once it's powered up and the lights have flashed. (Note: it's possible that releasing the button and then trying to flash the iFan03 might not work. If that happens then just re-flash the iFan03 by continuing to hold the button after you plug in the flashing adpater until after the flashing process is complete in step 4 below.)
 
 3. Open your flashing software window. If using NodeMCU Pyflasher (recommended):
    - Select the firmware file that you want to flash
@@ -18,9 +18,9 @@ To flash the latest `sonoff.bin` file to the iFan03:
    - Ensure that flash mode `Dual Output (DOUT)`, and baud rate of `115200` is selected
    - If you are flashing Tasmota for the first time, also select "yes, wipes all data".
 
-4. While continuing to hold the button on the iFan03, click on the "Flash NodeMCU" button.
+4. Click on the "Flash NodeMCU" button.
 
-5. Wait until the flashing process is complete and then release the button on the iFan03. Unplug & Re-plug the serial adapter. Wait for the iFan03 to reboot.
+5. Wait until the flashing process is complete. Unplug & Re-plug the serial adapter. Wait for the iFan03 to reboot.
 
 6. If this is the first time you have flashed Tasmota on the device, connect to the iFan03 `sonoff-xxxx` Wi-Fi access point and configure your Wi-Fi credentials by opening `192.168.4.1` in a browser. Wait for the iFan03 to reboot.