From df46ba87058326aa70f68ec8ff432ded1a5ddfb1 Mon Sep 17 00:00:00 2001
From: tomblu88 <47721733+tomblu88@users.noreply.github.com>
Date: Tue, 13 Aug 2019 19:38:21 +0100
Subject: [PATCH] a small configuration change based on the BlitzWolf is
 required for the LED on the button to toggle properly

---
 Teckin-SP23.md | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Teckin-SP23.md b/Teckin-SP23.md
index 57df525e..f7494fd3 100644
--- a/Teckin-SP23.md
+++ b/Teckin-SP23.md
@@ -5,6 +5,8 @@ The Teckin SP23 is wifi enabled smart plug with the ability to remotely monitor
 
 The Teckin SP23 appears to be a clone of the BlitzWolf SHP2 hardware with Tuya software / firmware.
 
+After fleshing and configuring the WiFi, in the Tasmota web interface under Configure Template, use Based on BlitzWolf SHP (45) and then change GPIO2 from Led1i (56) to Led2i (57) for the led to toggle properly.
+
 The uses an ESP8266EX and is capable of switching up to 16 amps at 250 VAC.
 
 Two Teckin SP23s (marked V1.2) [bought from Amazon UK in January 2019](https://www.amazon.co.uk/TECKIN-Outlet-Wireless-Control-Required/dp/B07CVJYV3G) have been flashed successfully and use BlitzWolf SHP2 Sonoff configuration. Voltage calibration may be required for accurate power monitoring.