From e042202e602a47b245cecbcb90008dd516097e12 Mon Sep 17 00:00:00 2001
From: Michael Ingraham <34340210+meingraham@users.noreply.github.com>
Date: Tue, 18 Jun 2019 16:16:06 -0400
Subject: [PATCH] Update re: selecting a binay to flash

---
 Flashing.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Flashing.md b/Flashing.md
index c982fc25..7bc54f0d 100644
--- a/Flashing.md
+++ b/Flashing.md
@@ -1,6 +1,6 @@
-If you have followed [Hardware preparation](Hardware-preparation) your device is in Flash Mode and ready to be flashed with Tasmota and for that you need a **flashing tool**.
+If you have read through the [Prerequisites](#Prerequisites) you should have selected [a pre-compiled Tasmota firmware binary](https://github.com/arendst/Sonoff-Tasmota/wiki/Prerequisites#tasmota-firmware) or chosen to [compile your own Tasmota firmware binary](#flashing-and-compiling-from-source).
 
-Jump [here](#flashing-and-compiling-from-source) if you want to compile your own version of Tasmota.
+Once you have followed [Hardware preparation](Hardware-preparation), your device should be in Flash Mode and ready for a Tasmota firmware binary file to be flashed. For that you need a **flashing tool**.
 
 # NodeMCU PyFlasher
 NodeMCU PyFlasher is an easy to use GUI flasher based on [esptool.py](https://github.com/espressif/esptool) and is our recommended tool for a quick and easy flash.