From e099832bfd32b684eda1360aa9c8a58b844aabf0 Mon Sep 17 00:00:00 2001 From: reloxx13 Date: Thu, 15 Feb 2018 01:32:01 +0100 Subject: [PATCH] Board Version 2.3 HINT --- MagicHome-LED-strip-controller.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MagicHome-LED-strip-controller.md b/MagicHome-LED-strip-controller.md index bbf11593..00b58af8 100644 --- a/MagicHome-LED-strip-controller.md +++ b/MagicHome-LED-strip-controller.md @@ -46,6 +46,8 @@ Some GPIO are preconfigured with the board: - GPIO14 - Red color on the LED strip, second pin from the GND - GPIO12 - Blue color on the LED strip, third pin from the GND +Check this for Board Version 2.3 : [#1867](https://github.com/arendst/Sonoff-Tasmota/issues/1867#issuecomment-364811579) + Due to variants, you can configure: - GPIO04 - on non-IR boards, it's an open pin you can use for Onewire, button or something else. It might have pull-down resistor and/or bypass capacitor, so please take that into consideration. On IR-enabled boards, IR receiver is connected to this pin, so you can use IRRecv as functionality. - GPIO13 - This pin is not used on RGB board (so you'll leave it as "None"), but on RGBW, it's driving another channel (cold white or warm white) for LED strip.