diff --git a/Home-Assistant.md b/Home-Assistant.md
index c0c2d22d..ec6c4c29 100644
--- a/Home-Assistant.md
+++ b/Home-Assistant.md
@@ -65,7 +65,7 @@ MQT: tasmota/stat/RESULT = {"BUTTON1":"TOGGLE"}
 MQT: tasmota/stat/RESULT = {"POWER":"ON"} 
 MQT: tasmota/stat/POWER = ON
 ```
-This option leave to the user the ability to get a more granular control over entities on both Tasmota or Hass.
+This option gives the user the ability to get a more granular control over entities on both Tasmota and Hass.
 
 A simple Tasmota rule example:
 ```lua
@@ -80,9 +80,9 @@ MQT: tasmota/stat/RESULT = {"BUTTON1":"TOGGLE"}
 and the relay will NOT be switched.
 
 
-Tasmota `switchmode` default for buttons and switches is `Switchmode 0` (TOGGLE). This means all the entities created will automatically turn off after `one second`. To change the button behavior a [switchmode](Commands#switchmode) change is needed. For example setting up a switch to `switchmode 1` (follow) will create a switch with ON and OFF payloads.
+Tasmota `switchmode` default for buttons and switches is `Switchmode 0` (TOGGLE). This means all the entities created will automatically turn off after `one second`. To change the button behavior, [`SwitchMode`](Commands#switchmode) must be changed. For example setting up a switch to `SwitchMode 1` (follow) will create a switch with ON and OFF payloads.
 
-For other type of devices, e.g SOnoff iFan02, example entries for `configuration.yaml` are available in [[Home Assistant - Manual Config|Home-Assistant-‐-Manual-Config]]
+For other type of devices, e.g Sonoff iFan02, example entries for `configuration.yaml` are available in [[Home Assistant - Manual Config|Home-Assistant-‐-Manual-Config]]
 
 On each Tasmota device which should be automatically discovered by Hass, enter the following commands in the web console:\
 `SetOption19 1` - Enables MQTT discovery\