diff --git a/extmod/miniz/tinfl.c b/extmod/miniz/tinfl.c deleted file mode 100644 index 5fbe2c37d9..0000000000 --- a/extmod/miniz/tinfl.c +++ /dev/null @@ -1,595 +0,0 @@ -/* tinfl.c v1.11 - public domain inflate with zlib header parsing/adler32 checking (inflate-only subset of miniz.c) - See "unlicense" statement at the end of this file. - Rich Geldreich , last updated May 20, 2011 - Implements RFC 1950: http://www.ietf.org/rfc/rfc1950.txt and RFC 1951: http://www.ietf.org/rfc/rfc1951.txt - - The entire decompressor coroutine is implemented in tinfl_decompress(). The other functions are optional high-level helpers. -*/ -#ifndef TINFL_HEADER_INCLUDED -#define TINFL_HEADER_INCLUDED - -#include - -typedef unsigned char mz_uint8; -typedef signed short mz_int16; -typedef unsigned short mz_uint16; -typedef unsigned int mz_uint32; -typedef unsigned int mz_uint; -typedef unsigned long long mz_uint64; - -#if defined(_M_IX86) || defined(_M_X64) -// Set MINIZ_USE_UNALIGNED_LOADS_AND_STORES to 1 if integer loads and stores to unaligned addresses are acceptable on the target platform (slightly faster). -#define MINIZ_USE_UNALIGNED_LOADS_AND_STORES 1 -// Set MINIZ_LITTLE_ENDIAN to 1 if the processor is little endian. -#define MINIZ_LITTLE_ENDIAN 1 -#endif - -#if defined(_WIN64) || defined(__MINGW64__) || defined(_LP64) || defined(__LP64__) -// Set MINIZ_HAS_64BIT_REGISTERS to 1 if the processor has 64-bit general purpose registers (enables 64-bit bitbuffer in inflator) -#define MINIZ_HAS_64BIT_REGISTERS 1 -#endif - -// Works around MSVC's spammy "warning C4127: conditional expression is constant" message. -#ifdef _MSC_VER - #define MZ_MACRO_END while (0, 0) -#else - #define MZ_MACRO_END while (0) -#endif - -// Decompression flags used by tinfl_decompress(). -// TINFL_FLAG_PARSE_ZLIB_HEADER: If set, the input has a valid zlib header and ends with an adler32 checksum (it's a valid zlib stream). Otherwise, the input is a raw deflate stream. -// TINFL_FLAG_HAS_MORE_INPUT: If set, there are more input bytes available beyond the end of the supplied input buffer. If clear, the input buffer contains all remaining input. -// TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF: If set, the output buffer is large enough to hold the entire decompressed stream. If clear, the output buffer is at least the size of the dictionary (typically 32KB). -// TINFL_FLAG_COMPUTE_ADLER32: Force adler-32 checksum computation of the decompressed bytes. -enum -{ - TINFL_FLAG_PARSE_ZLIB_HEADER = 1, - TINFL_FLAG_HAS_MORE_INPUT = 2, - TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF = 4, - TINFL_FLAG_COMPUTE_ADLER32 = 8 -}; - -// High level decompression functions: -// tinfl_decompress_mem_to_heap() decompresses a block in memory to a heap block allocated via malloc(). -// On entry: -// pSrc_buf, src_buf_len: Pointer and size of the Deflate or zlib source data to decompress. -// On return: -// Function returns a pointer to the decompressed data, or NULL on failure. -// *pOut_len will be set to the decompressed data's size, which could be larger than src_buf_len on uncompressible data. -// The caller must free() the returned block when it's no longer needed. -void *tinfl_decompress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags); - -// tinfl_decompress_mem_to_mem() decompresses a block in memory to another block in memory. -// Returns TINFL_DECOMPRESS_MEM_TO_MEM_FAILED on failure, or the number of bytes written on success. -#define TINFL_DECOMPRESS_MEM_TO_MEM_FAILED ((size_t)(-1)) -size_t tinfl_decompress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags); - -// tinfl_decompress_mem_to_callback() decompresses a block in memory to an internal 32KB buffer, and a user provided callback function will be called to flush the buffer. -// Returns 1 on success or 0 on failure. -typedef int (*tinfl_put_buf_func_ptr)(const void* pBuf, int len, void *pUser); -int tinfl_decompress_mem_to_callback(const void *pIn_buf, size_t *pIn_buf_size, tinfl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags); - -struct tinfl_decompressor_tag; typedef struct tinfl_decompressor_tag tinfl_decompressor; - -// Max size of LZ dictionary. -#define TINFL_LZ_DICT_SIZE 32768 - -// Return status. -typedef enum -{ - TINFL_STATUS_BAD_PARAM = -3, - TINFL_STATUS_ADLER32_MISMATCH = -2, - TINFL_STATUS_FAILED = -1, - TINFL_STATUS_DONE = 0, - TINFL_STATUS_NEEDS_MORE_INPUT = 1, - TINFL_STATUS_HAS_MORE_OUTPUT = 2 -} tinfl_status; - -// Initializes the decompressor to its initial state. -#define tinfl_init(r) do { (r)->m_state = 0; } MZ_MACRO_END -#define tinfl_get_adler32(r) (r)->m_check_adler32 - -// Main low-level decompressor coroutine function. This is the only function actually needed for decompression. All the other functions are just high-level helpers for improved usability. -// This is a universal API, i.e. it can be used as a building block to build any desired higher level decompression API. In the limit case, it can be called once per every byte input or output. -tinfl_status tinfl_decompress(tinfl_decompressor *r, const mz_uint8 *pIn_buf_next, size_t *pIn_buf_size, mz_uint8 *pOut_buf_start, mz_uint8 *pOut_buf_next, size_t *pOut_buf_size, const mz_uint32 decomp_flags); - -// Internal/private bits follow. -// dpgeorge: TINFL_FAST_LOOKUP_BITS can be adjusted to trade off RAM usage against speed. -enum -{ - TINFL_MAX_HUFF_TABLES = 3, TINFL_MAX_HUFF_SYMBOLS_0 = 288, TINFL_MAX_HUFF_SYMBOLS_1 = 32, TINFL_MAX_HUFF_SYMBOLS_2 = 19, - TINFL_FAST_LOOKUP_BITS = 7, TINFL_FAST_LOOKUP_SIZE = 1 << TINFL_FAST_LOOKUP_BITS -}; - -typedef struct -{ - mz_uint8 m_code_size[TINFL_MAX_HUFF_SYMBOLS_0]; - mz_int16 m_look_up[TINFL_FAST_LOOKUP_SIZE], m_tree[TINFL_MAX_HUFF_SYMBOLS_0 * 2]; -} tinfl_huff_table; - -#if MINIZ_HAS_64BIT_REGISTERS - #define TINFL_USE_64BIT_BITBUF 1 -#endif - -#if TINFL_USE_64BIT_BITBUF - typedef mz_uint64 tinfl_bit_buf_t; - #define TINFL_BITBUF_SIZE (64) -#else - typedef mz_uint32 tinfl_bit_buf_t; - #define TINFL_BITBUF_SIZE (32) -#endif - -struct tinfl_decompressor_tag -{ - mz_uint32 m_state, m_num_bits, m_zhdr0, m_zhdr1, m_z_adler32, m_final, m_type, m_check_adler32, m_dist, m_counter, m_num_extra, m_table_sizes[TINFL_MAX_HUFF_TABLES]; - tinfl_bit_buf_t m_bit_buf; - size_t m_dist_from_out_buf_start; - tinfl_huff_table m_tables[TINFL_MAX_HUFF_TABLES]; - mz_uint8 m_raw_header[4], m_len_codes[TINFL_MAX_HUFF_SYMBOLS_0 + TINFL_MAX_HUFF_SYMBOLS_1 + 137]; -}; - -#endif // #ifdef TINFL_HEADER_INCLUDED - -// ------------------- End of Header: Implementation follows. (If you only want the header, define MINIZ_HEADER_FILE_ONLY.) - -#ifndef TINFL_HEADER_FILE_ONLY - -#include - -// MZ_MALLOC, etc. are only used by the optional high-level helper functions. -#ifdef MINIZ_NO_MALLOC - #define MZ_MALLOC(x) NULL - #define MZ_FREE(x) x, ((void)0) - #define MZ_REALLOC(p, x) NULL -#else - #define MZ_MALLOC(x) malloc(x) - #define MZ_FREE(x) free(x) - #define MZ_REALLOC(p, x) realloc(p, x) -#endif - -#define MZ_MAX(a,b) (((a)>(b))?(a):(b)) -#define MZ_MIN(a,b) (((a)<(b))?(a):(b)) -#define MZ_CLEAR_OBJ(obj) memset(&(obj), 0, sizeof(obj)) - -#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES && MINIZ_LITTLE_ENDIAN - #define MZ_READ_LE16(p) *((const mz_uint16 *)(p)) - #define MZ_READ_LE32(p) *((const mz_uint32 *)(p)) -#else - #define MZ_READ_LE16(p) ((mz_uint32)(((const mz_uint8 *)(p))[0]) | ((mz_uint32)(((const mz_uint8 *)(p))[1]) << 8U)) - #define MZ_READ_LE32(p) ((mz_uint32)(((const mz_uint8 *)(p))[0]) | ((mz_uint32)(((const mz_uint8 *)(p))[1]) << 8U) | ((mz_uint32)(((const mz_uint8 *)(p))[2]) << 16U) | ((mz_uint32)(((const mz_uint8 *)(p))[3]) << 24U)) -#endif - -#define TINFL_MEMCPY(d, s, l) memcpy(d, s, l) -#define TINFL_MEMSET(p, c, l) memset(p, c, l) - -#define TINFL_CR_BEGIN switch(r->m_state) { case 0: -#define TINFL_CR_RETURN(state_index, result) do { status = result; r->m_state = state_index; goto common_exit; case state_index:; } MZ_MACRO_END -#define TINFL_CR_RETURN_FOREVER(state_index, result) do { for ( ; ; ) { TINFL_CR_RETURN(state_index, result); } } MZ_MACRO_END -#define TINFL_CR_FINISH } - -// TODO: If the caller has indicated that there's no more input, and we attempt to read beyond the input buf, then something is wrong with the input because the inflator never -// reads ahead more than it needs to. Currently TINFL_GET_BYTE() pads the end of the stream with 0's in this scenario. -#define TINFL_GET_BYTE(state_index, c) do { \ - if (pIn_buf_cur >= pIn_buf_end) { \ - for ( ; ; ) { \ - if (decomp_flags & TINFL_FLAG_HAS_MORE_INPUT) { \ - TINFL_CR_RETURN(state_index, TINFL_STATUS_NEEDS_MORE_INPUT); \ - if (pIn_buf_cur < pIn_buf_end) { \ - c = *pIn_buf_cur++; \ - break; \ - } \ - } else { \ - c = 0; \ - break; \ - } \ - } \ - } else c = *pIn_buf_cur++; } MZ_MACRO_END - -#define TINFL_NEED_BITS(state_index, n) do { mz_uint c; TINFL_GET_BYTE(state_index, c); bit_buf |= (((tinfl_bit_buf_t)c) << num_bits); num_bits += 8; } while (num_bits < (mz_uint)(n)) -#define TINFL_SKIP_BITS(state_index, n) do { if (num_bits < (mz_uint)(n)) { TINFL_NEED_BITS(state_index, n); } bit_buf >>= (n); num_bits -= (n); } MZ_MACRO_END -#define TINFL_GET_BITS(state_index, b, n) do { if (num_bits < (mz_uint)(n)) { TINFL_NEED_BITS(state_index, n); } b = bit_buf & ((1 << (n)) - 1); bit_buf >>= (n); num_bits -= (n); } MZ_MACRO_END - -// TINFL_HUFF_BITBUF_FILL() is only used rarely, when the number of bytes remaining in the input buffer falls below 2. -// It reads just enough bytes from the input stream that are needed to decode the next Huffman code (and absolutely no more). It works by trying to fully decode a -// Huffman code by using whatever bits are currently present in the bit buffer. If this fails, it reads another byte, and tries again until it succeeds or until the -// bit buffer contains >=15 bits (deflate's max. Huffman code size). -#define TINFL_HUFF_BITBUF_FILL(state_index, pHuff) \ - do { \ - temp = (pHuff)->m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]; \ - if (temp >= 0) { \ - code_len = temp >> 9; \ - if ((code_len) && (num_bits >= code_len)) \ - break; \ - } else if (num_bits > TINFL_FAST_LOOKUP_BITS) { \ - code_len = TINFL_FAST_LOOKUP_BITS; \ - do { \ - temp = (pHuff)->m_tree[~temp + ((bit_buf >> code_len++) & 1)]; \ - } while ((temp < 0) && (num_bits >= (code_len + 1))); if (temp >= 0) break; \ - } TINFL_GET_BYTE(state_index, c); bit_buf |= (((tinfl_bit_buf_t)c) << num_bits); num_bits += 8; \ - } while (num_bits < 15); - -// TINFL_HUFF_DECODE() decodes the next Huffman coded symbol. It's more complex than you would initially expect because the zlib API expects the decompressor to never read -// beyond the final byte of the deflate stream. (In other words, when this macro wants to read another byte from the input, it REALLY needs another byte in order to fully -// decode the next Huffman code.) Handling this properly is particularly important on raw deflate (non-zlib) streams, which aren't followed by a byte aligned adler-32. -// The slow path is only executed at the very end of the input buffer. -#define TINFL_HUFF_DECODE(state_index, sym, pHuff) do { \ - int temp; mz_uint code_len, c; \ - if (num_bits < 15) { \ - if ((pIn_buf_end - pIn_buf_cur) < 2) { \ - TINFL_HUFF_BITBUF_FILL(state_index, pHuff); \ - } else { \ - bit_buf |= (((tinfl_bit_buf_t)pIn_buf_cur[0]) << num_bits) | (((tinfl_bit_buf_t)pIn_buf_cur[1]) << (num_bits + 8)); pIn_buf_cur += 2; num_bits += 16; \ - } \ - } \ - if ((temp = (pHuff)->m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]) >= 0) \ - code_len = temp >> 9, temp &= 511; \ - else { \ - code_len = TINFL_FAST_LOOKUP_BITS; do { temp = (pHuff)->m_tree[~temp + ((bit_buf >> code_len++) & 1)]; } while (temp < 0); \ - } sym = temp; bit_buf >>= code_len; num_bits -= code_len; } MZ_MACRO_END - -tinfl_status tinfl_decompress(tinfl_decompressor *r, const mz_uint8 *pIn_buf_next, size_t *pIn_buf_size, mz_uint8 *pOut_buf_start, mz_uint8 *pOut_buf_next, size_t *pOut_buf_size, const mz_uint32 decomp_flags) -{ - static const mz_uint16 s_length_base[31] = { 3,4,5,6,7,8,9,10,11,13, 15,17,19,23,27,31,35,43,51,59, 67,83,99,115,131,163,195,227,258,0,0 }; - static const mz_uint8 s_length_extra[31]= { 0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0,0,0 }; - static const mz_uint16 s_dist_base[32] = { 1,2,3,4,5,7,9,13,17,25,33,49,65,97,129,193, 257,385,513,769,1025,1537,2049,3073,4097,6145,8193,12289,16385,24577,0,0}; - static const mz_uint8 s_dist_extra[32] = { 0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; - static const mz_uint8 s_length_dezigzag[19] = { 16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15 }; - static const mz_uint16 s_min_table_sizes[3] = { 257, 1, 4 }; - - tinfl_status status = TINFL_STATUS_FAILED; mz_uint32 num_bits, dist, counter, num_extra; tinfl_bit_buf_t bit_buf; - const mz_uint8 *pIn_buf_cur = pIn_buf_next, *const pIn_buf_end = pIn_buf_next + *pIn_buf_size; - mz_uint8 *pOut_buf_cur = pOut_buf_next, *const pOut_buf_end = pOut_buf_next + *pOut_buf_size; - size_t out_buf_size_mask = (decomp_flags & TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF) ? (size_t)-1 : ((pOut_buf_next - pOut_buf_start) + *pOut_buf_size) - 1, dist_from_out_buf_start; - - // Ensure the output buffer's size is a power of 2, unless the output buffer is large enough to hold the entire output file (in which case it doesn't matter). - if (((out_buf_size_mask + 1) & out_buf_size_mask) || (pOut_buf_next < pOut_buf_start)) { *pIn_buf_size = *pOut_buf_size = 0; return TINFL_STATUS_BAD_PARAM; } - - num_bits = r->m_num_bits; bit_buf = r->m_bit_buf; dist = r->m_dist; counter = r->m_counter; num_extra = r->m_num_extra; dist_from_out_buf_start = r->m_dist_from_out_buf_start; - TINFL_CR_BEGIN - - bit_buf = num_bits = dist = counter = num_extra = r->m_zhdr0 = r->m_zhdr1 = 0; r->m_z_adler32 = r->m_check_adler32 = 1; - if (decomp_flags & TINFL_FLAG_PARSE_ZLIB_HEADER) - { - TINFL_GET_BYTE(1, r->m_zhdr0); TINFL_GET_BYTE(2, r->m_zhdr1); - counter = (((r->m_zhdr0 * 256 + r->m_zhdr1) % 31 != 0) || (r->m_zhdr1 & 32) || ((r->m_zhdr0 & 15) != 8)); - if (!(decomp_flags & TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF)) counter |= (((1U << (8U + (r->m_zhdr0 >> 4))) > 32768U) || ((out_buf_size_mask + 1) < (size_t)(1U << (8U + (r->m_zhdr0 >> 4))))); - if (counter) { TINFL_CR_RETURN_FOREVER(36, TINFL_STATUS_FAILED); } - } - - do - { - TINFL_GET_BITS(3, r->m_final, 3); r->m_type = r->m_final >> 1; - if (r->m_type == 0) - { - TINFL_SKIP_BITS(5, num_bits & 7); - for (counter = 0; counter < 4; ++counter) { if (num_bits) TINFL_GET_BITS(6, r->m_raw_header[counter], 8); else TINFL_GET_BYTE(7, r->m_raw_header[counter]); } - if ((counter = (r->m_raw_header[0] | (r->m_raw_header[1] << 8))) != (mz_uint)(0xFFFF ^ (r->m_raw_header[2] | (r->m_raw_header[3] << 8)))) { TINFL_CR_RETURN_FOREVER(39, TINFL_STATUS_FAILED); } - while ((counter) && (num_bits)) - { - TINFL_GET_BITS(51, dist, 8); - while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(52, TINFL_STATUS_HAS_MORE_OUTPUT); } - *pOut_buf_cur++ = (mz_uint8)dist; - counter--; - } - while (counter) - { - size_t n; while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(9, TINFL_STATUS_HAS_MORE_OUTPUT); } - while (pIn_buf_cur >= pIn_buf_end) - { - if (decomp_flags & TINFL_FLAG_HAS_MORE_INPUT) - { - TINFL_CR_RETURN(38, TINFL_STATUS_NEEDS_MORE_INPUT); - } - else - { - TINFL_CR_RETURN_FOREVER(40, TINFL_STATUS_FAILED); - } - } - n = MZ_MIN(MZ_MIN((size_t)(pOut_buf_end - pOut_buf_cur), (size_t)(pIn_buf_end - pIn_buf_cur)), counter); - TINFL_MEMCPY(pOut_buf_cur, pIn_buf_cur, n); pIn_buf_cur += n; pOut_buf_cur += n; counter -= (mz_uint)n; - } - } - else if (r->m_type == 3) - { - TINFL_CR_RETURN_FOREVER(10, TINFL_STATUS_FAILED); - } - else - { - if (r->m_type == 1) - { - mz_uint8 *p = r->m_tables[0].m_code_size; mz_uint i; - r->m_table_sizes[0] = 288; r->m_table_sizes[1] = 32; TINFL_MEMSET(r->m_tables[1].m_code_size, 5, 32); - for ( i = 0; i <= 143; ++i) *p++ = 8; for ( ; i <= 255; ++i) *p++ = 9; for ( ; i <= 279; ++i) *p++ = 7; for ( ; i <= 287; ++i) *p++ = 8; - } - else - { - for (counter = 0; counter < 3; counter++) { TINFL_GET_BITS(11, r->m_table_sizes[counter], "\05\05\04"[counter]); r->m_table_sizes[counter] += s_min_table_sizes[counter]; } - MZ_CLEAR_OBJ(r->m_tables[2].m_code_size); for (counter = 0; counter < r->m_table_sizes[2]; counter++) { mz_uint s; TINFL_GET_BITS(14, s, 3); r->m_tables[2].m_code_size[s_length_dezigzag[counter]] = (mz_uint8)s; } - r->m_table_sizes[2] = 19; - } - for ( ; (int)r->m_type >= 0; r->m_type--) - { - int tree_next, tree_cur; tinfl_huff_table *pTable; - mz_uint i, j, used_syms, total, sym_index, next_code[17], total_syms[16]; pTable = &r->m_tables[r->m_type]; MZ_CLEAR_OBJ(total_syms); MZ_CLEAR_OBJ(pTable->m_look_up); MZ_CLEAR_OBJ(pTable->m_tree); - for (i = 0; i < r->m_table_sizes[r->m_type]; ++i) total_syms[pTable->m_code_size[i]]++; - used_syms = 0, total = 0; next_code[0] = next_code[1] = 0; - for (i = 1; i <= 15; ++i) { used_syms += total_syms[i]; next_code[i + 1] = (total = ((total + total_syms[i]) << 1)); } - if ((65536 != total) && (used_syms > 1)) - { - TINFL_CR_RETURN_FOREVER(35, TINFL_STATUS_FAILED); - } - for (tree_next = -1, sym_index = 0; sym_index < r->m_table_sizes[r->m_type]; ++sym_index) - { - mz_uint rev_code = 0, l, cur_code, code_size = pTable->m_code_size[sym_index]; if (!code_size) continue; - cur_code = next_code[code_size]++; for (l = code_size; l > 0; l--, cur_code >>= 1) rev_code = (rev_code << 1) | (cur_code & 1); - if (code_size <= TINFL_FAST_LOOKUP_BITS) { mz_int16 k = (mz_int16)((code_size << 9) | sym_index); while (rev_code < TINFL_FAST_LOOKUP_SIZE) { pTable->m_look_up[rev_code] = k; rev_code += (1 << code_size); } continue; } - if (0 == (tree_cur = pTable->m_look_up[rev_code & (TINFL_FAST_LOOKUP_SIZE - 1)])) { pTable->m_look_up[rev_code & (TINFL_FAST_LOOKUP_SIZE - 1)] = (mz_int16)tree_next; tree_cur = tree_next; tree_next -= 2; } - rev_code >>= (TINFL_FAST_LOOKUP_BITS - 1); - for (j = code_size; j > (TINFL_FAST_LOOKUP_BITS + 1); j--) - { - tree_cur -= ((rev_code >>= 1) & 1); - if (!pTable->m_tree[-tree_cur - 1]) { pTable->m_tree[-tree_cur - 1] = (mz_int16)tree_next; tree_cur = tree_next; tree_next -= 2; } else tree_cur = pTable->m_tree[-tree_cur - 1]; - } - tree_cur -= ((rev_code >>= 1) & 1); pTable->m_tree[-tree_cur - 1] = (mz_int16)sym_index; - } - if (r->m_type == 2) - { - for (counter = 0; counter < (r->m_table_sizes[0] + r->m_table_sizes[1]); ) - { - mz_uint s; TINFL_HUFF_DECODE(16, dist, &r->m_tables[2]); if (dist < 16) { r->m_len_codes[counter++] = (mz_uint8)dist; continue; } - if ((dist == 16) && (!counter)) - { - TINFL_CR_RETURN_FOREVER(17, TINFL_STATUS_FAILED); - } - num_extra = "\02\03\07"[dist - 16]; TINFL_GET_BITS(18, s, num_extra); s += "\03\03\013"[dist - 16]; - TINFL_MEMSET(r->m_len_codes + counter, (dist == 16) ? r->m_len_codes[counter - 1] : 0, s); counter += s; - } - if ((r->m_table_sizes[0] + r->m_table_sizes[1]) != counter) - { - TINFL_CR_RETURN_FOREVER(21, TINFL_STATUS_FAILED); - } - TINFL_MEMCPY(r->m_tables[0].m_code_size, r->m_len_codes, r->m_table_sizes[0]); TINFL_MEMCPY(r->m_tables[1].m_code_size, r->m_len_codes + r->m_table_sizes[0], r->m_table_sizes[1]); - } - } - for ( ; ; ) - { - mz_uint8 *pSrc; - for ( ; ; ) - { - if (((pIn_buf_end - pIn_buf_cur) < 4) || ((pOut_buf_end - pOut_buf_cur) < 2)) - { - TINFL_HUFF_DECODE(23, counter, &r->m_tables[0]); - if (counter >= 256) - break; - while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(24, TINFL_STATUS_HAS_MORE_OUTPUT); } - *pOut_buf_cur++ = (mz_uint8)counter; - } - else - { - int sym2; mz_uint code_len; -#if TINFL_USE_64BIT_BITBUF - if (num_bits < 30) { bit_buf |= (((tinfl_bit_buf_t)MZ_READ_LE32(pIn_buf_cur)) << num_bits); pIn_buf_cur += 4; num_bits += 32; } -#else - if (num_bits < 15) { bit_buf |= (((tinfl_bit_buf_t)MZ_READ_LE16(pIn_buf_cur)) << num_bits); pIn_buf_cur += 2; num_bits += 16; } -#endif - if ((sym2 = r->m_tables[0].m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]) >= 0) - code_len = sym2 >> 9; - else - { - code_len = TINFL_FAST_LOOKUP_BITS; do { sym2 = r->m_tables[0].m_tree[~sym2 + ((bit_buf >> code_len++) & 1)]; } while (sym2 < 0); - } - counter = sym2; bit_buf >>= code_len; num_bits -= code_len; - if (counter & 256) - break; - -#if !TINFL_USE_64BIT_BITBUF - if (num_bits < 15) { bit_buf |= (((tinfl_bit_buf_t)MZ_READ_LE16(pIn_buf_cur)) << num_bits); pIn_buf_cur += 2; num_bits += 16; } -#endif - if ((sym2 = r->m_tables[0].m_look_up[bit_buf & (TINFL_FAST_LOOKUP_SIZE - 1)]) >= 0) - code_len = sym2 >> 9; - else - { - code_len = TINFL_FAST_LOOKUP_BITS; do { sym2 = r->m_tables[0].m_tree[~sym2 + ((bit_buf >> code_len++) & 1)]; } while (sym2 < 0); - } - bit_buf >>= code_len; num_bits -= code_len; - - pOut_buf_cur[0] = (mz_uint8)counter; - if (sym2 & 256) - { - pOut_buf_cur++; - counter = sym2; - break; - } - pOut_buf_cur[1] = (mz_uint8)sym2; - pOut_buf_cur += 2; - } - } - if ((counter &= 511) == 256) break; - - num_extra = s_length_extra[counter - 257]; counter = s_length_base[counter - 257]; - if (num_extra) { mz_uint extra_bits; TINFL_GET_BITS(25, extra_bits, num_extra); counter += extra_bits; } - - TINFL_HUFF_DECODE(26, dist, &r->m_tables[1]); - num_extra = s_dist_extra[dist]; dist = s_dist_base[dist]; - if (num_extra) { mz_uint extra_bits; TINFL_GET_BITS(27, extra_bits, num_extra); dist += extra_bits; } - - dist_from_out_buf_start = pOut_buf_cur - pOut_buf_start; - if ((dist > dist_from_out_buf_start) && (decomp_flags & TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF)) - { - TINFL_CR_RETURN_FOREVER(37, TINFL_STATUS_FAILED); - } - - pSrc = pOut_buf_start + ((dist_from_out_buf_start - dist) & out_buf_size_mask); - - if ((MZ_MAX(pOut_buf_cur, pSrc) + counter) > pOut_buf_end) - { - while (counter--) - { - while (pOut_buf_cur >= pOut_buf_end) { TINFL_CR_RETURN(53, TINFL_STATUS_HAS_MORE_OUTPUT); } - *pOut_buf_cur++ = pOut_buf_start[(dist_from_out_buf_start++ - dist) & out_buf_size_mask]; - } - continue; - } -#if MINIZ_USE_UNALIGNED_LOADS_AND_STORES - else if ((counter >= 9) && (counter <= dist)) - { - const mz_uint8 *pSrc_end = pSrc + (counter & ~7); - do - { - ((mz_uint32 *)pOut_buf_cur)[0] = ((const mz_uint32 *)pSrc)[0]; - ((mz_uint32 *)pOut_buf_cur)[1] = ((const mz_uint32 *)pSrc)[1]; - pOut_buf_cur += 8; - } while ((pSrc += 8) < pSrc_end); - if ((counter &= 7) < 3) - { - if (counter) - { - pOut_buf_cur[0] = pSrc[0]; - if (counter > 1) - pOut_buf_cur[1] = pSrc[1]; - pOut_buf_cur += counter; - } - continue; - } - } -#endif - do - { - pOut_buf_cur[0] = pSrc[0]; - pOut_buf_cur[1] = pSrc[1]; - pOut_buf_cur[2] = pSrc[2]; - pOut_buf_cur += 3; pSrc += 3; - } while ((int)(counter -= 3) > 2); - if ((int)counter > 0) - { - pOut_buf_cur[0] = pSrc[0]; - if ((int)counter > 1) - pOut_buf_cur[1] = pSrc[1]; - pOut_buf_cur += counter; - } - } - } - } while (!(r->m_final & 1)); - if (decomp_flags & TINFL_FLAG_PARSE_ZLIB_HEADER) - { - TINFL_SKIP_BITS(32, num_bits & 7); for (counter = 0; counter < 4; ++counter) { mz_uint s; if (num_bits) TINFL_GET_BITS(41, s, 8); else TINFL_GET_BYTE(42, s); r->m_z_adler32 = (r->m_z_adler32 << 8) | s; } - } - TINFL_CR_RETURN_FOREVER(34, TINFL_STATUS_DONE); - TINFL_CR_FINISH - -common_exit: - r->m_num_bits = num_bits; r->m_bit_buf = bit_buf; r->m_dist = dist; r->m_counter = counter; r->m_num_extra = num_extra; r->m_dist_from_out_buf_start = dist_from_out_buf_start; - *pIn_buf_size = pIn_buf_cur - pIn_buf_next; *pOut_buf_size = pOut_buf_cur - pOut_buf_next; - if ((decomp_flags & (TINFL_FLAG_PARSE_ZLIB_HEADER | TINFL_FLAG_COMPUTE_ADLER32)) && (status >= 0)) - { - const mz_uint8 *ptr = pOut_buf_next; size_t buf_len = *pOut_buf_size; - mz_uint32 i, s1 = r->m_check_adler32 & 0xffff, s2 = r->m_check_adler32 >> 16; size_t block_len = buf_len % 5552; - while (buf_len) - { - for (i = 0; i + 7 < block_len; i += 8, ptr += 8) - { - s1 += ptr[0], s2 += s1; s1 += ptr[1], s2 += s1; s1 += ptr[2], s2 += s1; s1 += ptr[3], s2 += s1; - s1 += ptr[4], s2 += s1; s1 += ptr[5], s2 += s1; s1 += ptr[6], s2 += s1; s1 += ptr[7], s2 += s1; - } - for ( ; i < block_len; ++i) s1 += *ptr++, s2 += s1; - s1 %= 65521U, s2 %= 65521U; buf_len -= block_len; block_len = 5552; - } - r->m_check_adler32 = (s2 << 16) + s1; if ((status == TINFL_STATUS_DONE) && (decomp_flags & TINFL_FLAG_PARSE_ZLIB_HEADER) && (r->m_check_adler32 != r->m_z_adler32)) status = TINFL_STATUS_ADLER32_MISMATCH; - } - return status; -} - -#if 0 -// Higher level helper functions. -void *tinfl_decompress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags) -{ - tinfl_decompressor decomp; void *pBuf = NULL, *pNew_buf; size_t src_buf_ofs = 0, out_buf_capacity = 0; - *pOut_len = 0; - tinfl_init(&decomp); - for ( ; ; ) - { - size_t src_buf_size = src_buf_len - src_buf_ofs, dst_buf_size = out_buf_capacity - *pOut_len, new_out_buf_capacity; - tinfl_status status = tinfl_decompress(&decomp, (const mz_uint8*)pSrc_buf + src_buf_ofs, &src_buf_size, (mz_uint8*)pBuf, pBuf ? (mz_uint8*)pBuf + *pOut_len : NULL, &dst_buf_size, - (flags & ~TINFL_FLAG_HAS_MORE_INPUT) | TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF); - if ((status < 0) || (status == TINFL_STATUS_NEEDS_MORE_INPUT)) - { - MZ_FREE(pBuf); *pOut_len = 0; return NULL; - } - src_buf_ofs += src_buf_size; - *pOut_len += dst_buf_size; - if (status == TINFL_STATUS_DONE) break; - new_out_buf_capacity = out_buf_capacity * 2; if (new_out_buf_capacity < 128) new_out_buf_capacity = 128; - pNew_buf = MZ_REALLOC(pBuf, new_out_buf_capacity); - if (!pNew_buf) - { - MZ_FREE(pBuf); *pOut_len = 0; return NULL; - } - pBuf = pNew_buf; out_buf_capacity = new_out_buf_capacity; - } - return pBuf; -} - -size_t tinfl_decompress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags) -{ - tinfl_decompressor decomp; tinfl_status status; tinfl_init(&decomp); - status = tinfl_decompress(&decomp, (const mz_uint8*)pSrc_buf, &src_buf_len, (mz_uint8*)pOut_buf, (mz_uint8*)pOut_buf, &out_buf_len, (flags & ~TINFL_FLAG_HAS_MORE_INPUT) | TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF); - return (status != TINFL_STATUS_DONE) ? TINFL_DECOMPRESS_MEM_TO_MEM_FAILED : out_buf_len; -} - -int tinfl_decompress_mem_to_callback(const void *pIn_buf, size_t *pIn_buf_size, tinfl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags) -{ - int result = 0; - tinfl_decompressor decomp; - mz_uint8 *pDict = (mz_uint8*)MZ_MALLOC(TINFL_LZ_DICT_SIZE); size_t in_buf_ofs = 0, dict_ofs = 0; - if (!pDict) - return TINFL_STATUS_FAILED; - tinfl_init(&decomp); - for ( ; ; ) - { - size_t in_buf_size = *pIn_buf_size - in_buf_ofs, dst_buf_size = TINFL_LZ_DICT_SIZE - dict_ofs; - tinfl_status status = tinfl_decompress(&decomp, (const mz_uint8*)pIn_buf + in_buf_ofs, &in_buf_size, pDict, pDict + dict_ofs, &dst_buf_size, - (flags & ~(TINFL_FLAG_HAS_MORE_INPUT | TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF))); - in_buf_ofs += in_buf_size; - if ((dst_buf_size) && (!(*pPut_buf_func)(pDict + dict_ofs, (int)dst_buf_size, pPut_buf_user))) - break; - if (status != TINFL_STATUS_HAS_MORE_OUTPUT) - { - result = (status == TINFL_STATUS_DONE); - break; - } - dict_ofs = (dict_ofs + dst_buf_size) & (TINFL_LZ_DICT_SIZE - 1); - } - MZ_FREE(pDict); - *pIn_buf_size = in_buf_ofs; - return result; -} -#endif - -#endif // #ifndef TINFL_HEADER_FILE_ONLY - -/* - This is free and unencumbered software released into the public domain. - - Anyone is free to copy, modify, publish, use, compile, sell, or - distribute this software, either in source code form or as a compiled - binary, for any purpose, commercial or non-commercial, and by any - means. - - In jurisdictions that recognize copyright laws, the author or authors - of this software dedicate any and all copyright interest in the - software to the public domain. We make this dedication for the benefit - of the public at large and to the detriment of our heirs and - successors. We intend this dedication to be an overt act of - relinquishment in perpetuity of all present and future rights to this - software under copyright law. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR - OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - OTHER DEALINGS IN THE SOFTWARE. - - For more information, please refer to -*/ diff --git a/extmod/modzlibd.c b/extmod/modzlibd.c deleted file mode 100644 index 696b7c8ecf..0000000000 --- a/extmod/modzlibd.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * This file is part of the Micro Python project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2014 Paul Sokolovsky - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include -#include -#include -#include -#include -#include - -#include "mpconfig.h" -#include "misc.h" -#include "qstr.h" -#include "obj.h" -#include "runtime.h" - -#if MICROPY_PY_ZLIBD - -#include "miniz/tinfl.c" - -#if 0 // print debugging info -#define DEBUG_printf DEBUG_printf -#else // don't print debugging info -#define DEBUG_printf(...) (void)0 -#endif - -STATIC mp_obj_t mod_zlibd_decompress(uint n_args, mp_obj_t *args) { - mp_obj_t data = args[0]; - mp_buffer_info_t bufinfo; - mp_get_buffer_raise(data, &bufinfo, MP_BUFFER_READ); - tinfl_decompressor *decomp = m_new_obj(tinfl_decompressor); - tinfl_init(decomp); - DEBUG_printf("sizeof(tinfl_decompressor)=" UINT_FMT "\n", sizeof(tinfl_decompressor)); - - byte *out = m_new(byte, bufinfo.len); - size_t out_len = bufinfo.len; - size_t in_buf_ofs = 0, dst_buf_ofs = 0; - size_t dst_buf_sz = bufinfo.len; - - while (1) { - size_t in_buf_sz = bufinfo.len - in_buf_ofs; - DEBUG_printf("tinfl in: in_ofs=%d in_sz=%d dst_ofs=%d, dst_sz=%d\n", in_buf_ofs, in_buf_sz, dst_buf_ofs, dst_buf_sz); - tinfl_status st = tinfl_decompress(decomp, - (mz_uint8*) bufinfo.buf + in_buf_ofs, &in_buf_sz, - out, out + dst_buf_ofs, &dst_buf_sz, - TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF | TINFL_FLAG_PARSE_ZLIB_HEADER); - DEBUG_printf("tinfl out: st=%d, in_sz=%d, out_sz=%d\n", st, in_buf_sz, dst_buf_sz); - in_buf_ofs += in_buf_sz; - dst_buf_ofs += dst_buf_sz; - if (st != TINFL_STATUS_HAS_MORE_OUTPUT) { - break; - } - out = m_renew(byte, out, out_len, dst_buf_ofs + 256); - out_len = dst_buf_ofs + 256; - dst_buf_sz = out_len - dst_buf_ofs; - } - - m_del_obj(tinfl_decompressor, decomp); - return mp_obj_new_bytearray_by_ref(dst_buf_ofs, out); -} -STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(mod_zlibd_decompress_obj, 1, 3, mod_zlibd_decompress); - -STATIC const mp_map_elem_t mp_module_zlibd_globals_table[] = { - { MP_OBJ_NEW_QSTR(MP_QSTR___name__), MP_OBJ_NEW_QSTR(MP_QSTR_zlibd) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_decompress), (mp_obj_t)&mod_zlibd_decompress_obj }, -}; - -STATIC const mp_obj_dict_t mp_module_zlibd_globals = { - .base = {&mp_type_dict}, - .map = { - .all_keys_are_qstrs = 1, - .table_is_fixed_array = 1, - .used = MP_ARRAY_SIZE(mp_module_zlibd_globals_table), - .alloc = MP_ARRAY_SIZE(mp_module_zlibd_globals_table), - .table = (mp_map_elem_t*)mp_module_zlibd_globals_table, - }, -}; - -const mp_obj_module_t mp_module_zlibd = { - .base = { &mp_type_module }, - .name = MP_QSTR_zlibd, - .globals = (mp_obj_dict_t*)&mp_module_zlibd_globals, -}; - -#endif //MICROPY_PY_ZLIBD diff --git a/py/builtin.h b/py/builtin.h index 5a68609aee..01ec22d2b0 100644 --- a/py/builtin.h +++ b/py/builtin.h @@ -88,7 +88,6 @@ extern struct _dummy_t mp_sys_stderr_obj; // extmod modules extern const mp_obj_module_t mp_module_uctypes; -extern const mp_obj_module_t mp_module_zlibd; extern const mp_obj_module_t mp_module_uzlib; extern const mp_obj_module_t mp_module_ujson; extern const mp_obj_module_t mp_module_ure; diff --git a/py/builtintables.c b/py/builtintables.c index 972aee9c18..b67ef05169 100644 --- a/py/builtintables.c +++ b/py/builtintables.c @@ -203,9 +203,6 @@ STATIC const mp_map_elem_t mp_builtin_module_table[] = { #if MICROPY_PY_UCTYPES { MP_OBJ_NEW_QSTR(MP_QSTR_uctypes), (mp_obj_t)&mp_module_uctypes }, #endif -#if MICROPY_PY_ZLIBD - { MP_OBJ_NEW_QSTR(MP_QSTR_zlibd), (mp_obj_t)&mp_module_zlibd }, -#endif #if MICROPY_PY_UZLIB { MP_OBJ_NEW_QSTR(MP_QSTR_uzlib), (mp_obj_t)&mp_module_uzlib }, #endif diff --git a/py/mpconfig.h b/py/mpconfig.h index 96108a6117..618b8fde5f 100644 --- a/py/mpconfig.h +++ b/py/mpconfig.h @@ -391,10 +391,6 @@ typedef double mp_float_t; #define MICROPY_PY_UCTYPES (0) #endif -#ifndef MICROPY_PY_ZLIBD -#define MICROPY_PY_ZLIBD (0) -#endif - #ifndef MICROPY_PY_UZLIB #define MICROPY_PY_UZLIB (0) #endif diff --git a/py/py.mk b/py/py.mk index 9e5d918b43..f58a5d0558 100644 --- a/py/py.mk +++ b/py/py.mk @@ -111,7 +111,6 @@ PY_O_BASENAME = \ pfenv.o \ pfenv_printf.o \ ../extmod/moductypes.o \ - ../extmod/modzlibd.o \ ../extmod/modujson.o \ ../extmod/modure.o \ ../extmod/moduzlib.o \ diff --git a/py/qstrdefs.h b/py/qstrdefs.h index a67cd92b83..3252e35ad4 100644 --- a/py/qstrdefs.h +++ b/py/qstrdefs.h @@ -463,11 +463,6 @@ Q(setter) Q(deleter) #endif -#if MICROPY_PY_ZLIBD -Q(zlibd) -Q(decompress) -#endif - #if MICROPY_PY_UZLIB Q(uzlib) Q(decompress)