From bdf958df30539f399edef8650947d7ff4048a8ca Mon Sep 17 00:00:00 2001 From: Daniel Campora Date: Tue, 30 Jun 2015 22:27:50 +0200 Subject: [PATCH] docs/wipy: Update safe boot comments to match actual behaviour. --- docs/wipy/general.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/wipy/general.rst b/docs/wipy/general.rst index 3aad440ba4..67f47f21e4 100644 --- a/docs/wipy/general.rst +++ b/docs/wipy/general.rst @@ -37,7 +37,7 @@ into standard mode: the ``boot.py`` file will be executed first, then You can override this boot sequence by pulling ``GPIO28`` **up** (connect it to the 3v3 output pin) during reset. The heart beat LED will flash slowly -3 times to signal that safe boot is being requested, and then 3 more times +3 times to signal that safe boot is being requested, and then 4 more times quickly to let you know that safe boot is going to be performed. While safe booting, the WiPy runs the factory firmware and skips the execution of ``boot.py`` and ``main.py``. This is useful to recover from any crash situation.