From d7f199465f229e95b1ac1a1b6b74a3e0ce1f98c7 Mon Sep 17 00:00:00 2001 From: Dave Hylands Date: Thu, 15 Jan 2015 21:45:21 -0800 Subject: [PATCH] stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. --- stmhal/boards/CERB40/mpconfigboard.h | 29 ++ stmhal/boards/CERB40/pins.csv | 40 ++ stmhal/boards/CERB40/stm32f4xx_hal_conf.h | 408 ++++++++++++++++++ stmhal/boards/HYDRABUS/mpconfigboard.h | 1 + stmhal/boards/NETDUINO_PLUS_2/mpconfigboard.h | 1 + stmhal/boards/PYBV10/mpconfigboard.h | 1 + stmhal/boards/PYBV3/mpconfigboard.h | 1 + stmhal/boards/PYBV4/mpconfigboard.h | 1 + stmhal/boards/STM32F4DISC/mpconfigboard.h | 1 + stmhal/led.c | 13 + stmhal/modpyb.c | 2 + stmhal/spi.c | 14 + 12 files changed, 512 insertions(+) create mode 100644 stmhal/boards/CERB40/mpconfigboard.h create mode 100644 stmhal/boards/CERB40/pins.csv create mode 100644 stmhal/boards/CERB40/stm32f4xx_hal_conf.h diff --git a/stmhal/boards/CERB40/mpconfigboard.h b/stmhal/boards/CERB40/mpconfigboard.h new file mode 100644 index 0000000000..a7df02b5bf --- /dev/null +++ b/stmhal/boards/CERB40/mpconfigboard.h @@ -0,0 +1,29 @@ +#define CERB40 + +#define MICROPY_HW_BOARD_NAME "Cerb40" +#define MICROPY_HW_MCU_NAME "STM32F405RG" +#define MICROPY_PY_SYS_PLATFORM "pyboard" + +#define MICROPY_HW_HAS_SWITCH (0) +#define MICROPY_HW_HAS_SDCARD (0) +#define MICROPY_HW_HAS_MMA7660 (0) +#define MICROPY_HW_HAS_LIS3DSH (0) +#define MICROPY_HW_HAS_LCD (0) +#define MICROPY_HW_ENABLE_RNG (1) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_SERVO (0) +#define MICROPY_HW_ENABLE_DAC (1) +#define MICROPY_HW_ENABLE_I2C1 (1) +#define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI2 (0) +#define MICROPY_HW_ENABLE_SPI3 (1) +#define MICROPY_HW_ENABLE_CAN (1) + +// The Cerb40 has No LEDs + +// The Cerb40 has No SDCard + +// USB config +//#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) +//#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/stmhal/boards/CERB40/pins.csv b/stmhal/boards/CERB40/pins.csv new file mode 100644 index 0000000000..6df6d61c77 --- /dev/null +++ b/stmhal/boards/CERB40/pins.csv @@ -0,0 +1,40 @@ +JP1,3.3V +JP2,GND +JP3,PA8 +JP4,PA13 +JP5,PA7 +JP6,PA6 +JP7,PC10 +JP8,PA14 +JP9,PC11 +JP10,PB4 +JP11,PB9 +JP12,PB3 +JP13,PD2 +JP14,PC12 +JP15,VBAT +JP16,PB8 +JP17,Loader +JP18,PB7 +JP19,PB6 +JP20,PB5 +JP21,Reset +JP22,PC0 +JP23,PC1 +JP24,PC2 +JP25,PC3 +JP26,PA0 +JP27,PA1 +JP28,PA2 +JP29,PA3 +JP30,PA4 +JP31,PA5 +JP32,PB10 +JP33,PB11 +JP34,PB14 +JP35,PB15 +JP36,PC6 +JP37,PC7 +JP38,PC8 +JP39,PC9 +JP40,VUSB diff --git a/stmhal/boards/CERB40/stm32f4xx_hal_conf.h b/stmhal/boards/CERB40/stm32f4xx_hal_conf.h new file mode 100644 index 0000000000..7026e36c3f --- /dev/null +++ b/stmhal/boards/CERB40/stm32f4xx_hal_conf.h @@ -0,0 +1,408 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @author MCD Application Team + * @version V1.1.0 + * @date 19-June-2014 + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +#define STM32F405xx +#define USE_USB_FS + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +//#define HAL_DCMI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +//#define HAL_ETH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_NAND_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_PCCARD_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +/* #define HAL_SDRAM_MODULE_ENABLED */ +#define HAL_HASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LTDC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +/* #define HAL_SAI_MODULE_ENABLED */ +#define HAL_SD_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)12000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 1 +#define DATA_CACHE_ENABLE 1 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2 +#define MAC_ADDR1 0 +#define MAC_ADDR2 0 +#define MAC_ADDR3 0 +#define MAC_ADDR4 0 +#define MAC_ADDR5 0 + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848 PHY Address*/ +#define DP83848_PHY_ADDRESS 0x01 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stmhal/boards/HYDRABUS/mpconfigboard.h b/stmhal/boards/HYDRABUS/mpconfigboard.h index 0109930cad..74bcb39d8c 100644 --- a/stmhal/boards/HYDRABUS/mpconfigboard.h +++ b/stmhal/boards/HYDRABUS/mpconfigboard.h @@ -15,6 +15,7 @@ #define MICROPY_HW_ENABLE_DAC (1) #define MICROPY_HW_ENABLE_I2C1 (1) #define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI2 (1) #define MICROPY_HW_ENABLE_SPI3 (1) #define MICROPY_HW_ENABLE_CAN (0) diff --git a/stmhal/boards/NETDUINO_PLUS_2/mpconfigboard.h b/stmhal/boards/NETDUINO_PLUS_2/mpconfigboard.h index 99d79d870e..e97bf187f4 100644 --- a/stmhal/boards/NETDUINO_PLUS_2/mpconfigboard.h +++ b/stmhal/boards/NETDUINO_PLUS_2/mpconfigboard.h @@ -19,6 +19,7 @@ #define MICROPY_HW_ENABLE_DAC (0) #define MICROPY_HW_ENABLE_I2C1 (0) #define MICROPY_HW_ENABLE_SPI1 (0) +#define MICROPY_HW_ENABLE_SPI2 (1) #define MICROPY_HW_ENABLE_SPI3 (0) #define MICROPY_HW_ENABLE_CAN (0) diff --git a/stmhal/boards/PYBV10/mpconfigboard.h b/stmhal/boards/PYBV10/mpconfigboard.h index 25472ba696..fd203a17b8 100644 --- a/stmhal/boards/PYBV10/mpconfigboard.h +++ b/stmhal/boards/PYBV10/mpconfigboard.h @@ -16,6 +16,7 @@ #define MICROPY_HW_ENABLE_DAC (1) #define MICROPY_HW_ENABLE_I2C1 (1) #define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI2 (1) #define MICROPY_HW_ENABLE_SPI3 (0) #define MICROPY_HW_ENABLE_CAN (1) diff --git a/stmhal/boards/PYBV3/mpconfigboard.h b/stmhal/boards/PYBV3/mpconfigboard.h index 1afc5e8c76..011fc639c6 100644 --- a/stmhal/boards/PYBV3/mpconfigboard.h +++ b/stmhal/boards/PYBV3/mpconfigboard.h @@ -15,6 +15,7 @@ #define MICROPY_HW_ENABLE_DAC (1) #define MICROPY_HW_ENABLE_I2C1 (1) #define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI2 (1) #define MICROPY_HW_ENABLE_SPI3 (0) #define MICROPY_HW_ENABLE_CAN (1) diff --git a/stmhal/boards/PYBV4/mpconfigboard.h b/stmhal/boards/PYBV4/mpconfigboard.h index 6663175f7a..bbb05ae588 100644 --- a/stmhal/boards/PYBV4/mpconfigboard.h +++ b/stmhal/boards/PYBV4/mpconfigboard.h @@ -15,6 +15,7 @@ #define MICROPY_HW_ENABLE_DAC (1) #define MICROPY_HW_ENABLE_I2C1 (1) #define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI2 (1) #define MICROPY_HW_ENABLE_SPI3 (0) #define MICROPY_HW_ENABLE_CAN (1) diff --git a/stmhal/boards/STM32F4DISC/mpconfigboard.h b/stmhal/boards/STM32F4DISC/mpconfigboard.h index bf26f641db..234692e2e0 100644 --- a/stmhal/boards/STM32F4DISC/mpconfigboard.h +++ b/stmhal/boards/STM32F4DISC/mpconfigboard.h @@ -15,6 +15,7 @@ #define MICROPY_HW_ENABLE_DAC (1) #define MICROPY_HW_ENABLE_I2C1 (1) #define MICROPY_HW_ENABLE_SPI1 (1) +#define MICROPY_HW_ENABLE_SPI2 (1) #define MICROPY_HW_ENABLE_SPI3 (0) #define MICROPY_HW_ENABLE_CAN (1) diff --git a/stmhal/led.c b/stmhal/led.c index 4a583d4cf7..272b74c2cd 100644 --- a/stmhal/led.c +++ b/stmhal/led.c @@ -34,6 +34,8 @@ #include "pin.h" #include "genhdr/pins.h" +#if defined(MICROPY_HW_LED1) + /// \moduleref pyb /// \class LED - LED object /// @@ -292,3 +294,14 @@ const mp_obj_type_t pyb_led_type = { .make_new = led_obj_make_new, .locals_dict = (mp_obj_t)&led_locals_dict, }; + +#else +// For boards with no LEDs, we leave an empty function here so that we don't +// have to put conditionals everywhere. +void led_init(void) { +} +void led_state(pyb_led_t led, int state) { +} +void led_toggle(pyb_led_t led) { +} +#endif // defined(MICROPY_HW_LED1) diff --git a/stmhal/modpyb.c b/stmhal/modpyb.c index 64712ad300..292e7965d9 100644 --- a/stmhal/modpyb.c +++ b/stmhal/modpyb.c @@ -573,7 +573,9 @@ STATIC const mp_map_elem_t pyb_module_globals_table[] = { { MP_OBJ_NEW_QSTR(MP_QSTR_SD), (mp_obj_t)&pyb_sdcard_obj }, #endif +#if defined(MICROPY_HW_LED1) { MP_OBJ_NEW_QSTR(MP_QSTR_LED), (mp_obj_t)&pyb_led_type }, +#endif { MP_OBJ_NEW_QSTR(MP_QSTR_I2C), (mp_obj_t)&pyb_i2c_type }, { MP_OBJ_NEW_QSTR(MP_QSTR_SPI), (mp_obj_t)&pyb_spi_type }, { MP_OBJ_NEW_QSTR(MP_QSTR_UART), (mp_obj_t)&pyb_uart_type }, diff --git a/stmhal/spi.c b/stmhal/spi.c index 364bf21691..109bfe49e8 100644 --- a/stmhal/spi.c +++ b/stmhal/spi.c @@ -63,7 +63,9 @@ #if MICROPY_HW_ENABLE_SPI1 SPI_HandleTypeDef SPIHandle1 = {.Instance = NULL}; #endif +#if MICROPY_HW_ENABLE_SPI2 SPI_HandleTypeDef SPIHandle2 = {.Instance = NULL}; +#endif #if MICROPY_HW_ENABLE_SPI3 SPI_HandleTypeDef SPIHandle3 = {.Instance = NULL}; #endif @@ -110,10 +112,12 @@ void SPI1_RX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi1_rx_dma_handle); } void SPI1_TX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi1_tx_dma_handle); } #endif +#if MICROPY_HW_ENABLE_SPI2 STATIC DMA_HandleTypeDef spi2_rx_dma_handle; STATIC DMA_HandleTypeDef spi2_tx_dma_handle; void SPI2_RX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi2_rx_dma_handle); } void SPI2_TX_DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&spi2_tx_dma_handle); } +#endif #if MICROPY_HW_ENABLE_SPI3 STATIC DMA_HandleTypeDef spi3_rx_dma_handle; @@ -128,8 +132,10 @@ void spi_init0(void) { memset(&SPIHandle1, 0, sizeof(SPI_HandleTypeDef)); SPIHandle1.Instance = SPI1; #endif +#if MICROPY_HW_ENABLE_SPI2 memset(&SPIHandle2, 0, sizeof(SPI_HandleTypeDef)); SPIHandle2.Instance = SPI2; +#endif #if MICROPY_HW_ENABLE_SPI3 memset(&SPIHandle3, 0, sizeof(SPI_HandleTypeDef)); SPIHandle3.Instance = SPI3; @@ -169,6 +175,7 @@ void spi_init(SPI_HandleTypeDef *spi, bool enable_nss_pin) { rx_dma_irqn = SPI1_RX_DMA_IRQN; tx_dma_irqn = SPI1_TX_DMA_IRQN; #endif +#if MICROPY_HW_ENABLE_SPI2 } else if (spi->Instance == SPI2) { // Y-skin: Y5=PB12=SPI2_NSS, Y6=PB13=SPI2_SCK, Y7=PB14=SPI2_MISO, Y8=PB15=SPI2_MOSI pins[0] = &pin_B12; @@ -187,6 +194,7 @@ void spi_init(SPI_HandleTypeDef *spi, bool enable_nss_pin) { tx_dma = &spi2_tx_dma_handle; rx_dma_irqn = SPI2_RX_DMA_IRQN; tx_dma_irqn = SPI2_TX_DMA_IRQN; +#endif #if MICROPY_HW_ENABLE_SPI3 } else if (spi->Instance == SPI3) { pins[0] = &pin_A4; @@ -266,10 +274,12 @@ void spi_deinit(SPI_HandleTypeDef *spi) { __SPI1_RELEASE_RESET(); __SPI1_CLK_DISABLE(); #endif +#if MICROPY_HW_ENABLE_SPI2 } else if (spi->Instance == SPI2) { __SPI2_FORCE_RESET(); __SPI2_RELEASE_RESET(); __SPI2_CLK_DISABLE(); +#endif #if MICROPY_HW_ENABLE_SPI3 } else if (spi->Instance == SPI3) { __SPI3_FORCE_RESET(); @@ -304,7 +314,11 @@ STATIC const pyb_spi_obj_t pyb_spi_obj[] = { #else {{&pyb_spi_type}, NULL}, #endif +#if MICROPY_HW_ENABLE_SPI2 {{&pyb_spi_type}, &SPIHandle2}, +#else + {{&pyb_spi_type}, NULL}, +#endif #if MICROPY_HW_ENABLE_SPI3 {{&pyb_spi_type}, &SPIHandle3}, #else