.. _filesystem: Working with filesystems ======================== .. contents:: This tutorial describes how MicroPython provides an on-device filesystem, allowing standard Python file I/O methods to be used with persistent storage. MicroPython automatically creates a default configuration and auto-detects the primary filesystem, so this tutorial will be mostly useful if you want to modify the partitioning, filesystem type, or use custom block devices. The filesystem is typically backed by internal flash memory on the device, but can also use external flash, RAM, or a custom block device. On some ports (e.g. STM32), the filesystem may also be available over USB MSC to a host PC. :ref:`pyboard_py` also provides a way for the host PC to access to the filesystem on all ports. Note: This is mainly for use on bare-metal ports like STM32 and ESP32. On ports with an operating system (e.g. the Unix port) the filesystem is provided by the host OS. VFS --- MicroPython implements a Unix-like Virtual File System (VFS) layer. All mounted filesystems are combined into a single virtual filesystem, starting at the root ``/``. Filesystems are mounted into directories in this structure, and at startup the working directory is changed to where the primary filesystem is mounted. On STM32 / Pyboard, the internal flash is mounted at ``/flash``, and optionally the SDCard at ``/sd``. On ESP8266/ESP32, the primary filesystem is mounted at ``/``. Block devices ------------- A block device is an instance of a class that implements the :class:`uos.AbstractBlockDev` protocol. Built-in block devices ~~~~~~~~~~~~~~~~~~~~~~ Ports provide built-in block devices to access their primary flash. On power-on, MicroPython will attempt to detect the filesystem on the default flash and configure and mount it automatically. If no filesystem is found, MicroPython will attempt to create a FAT filesystem spanning the entire flash. Ports can also provide a mechanism to "factory reset" the primary flash, usually by some combination of button presses at power on. STM32 / Pyboard ............... The :ref:`pyb.Flash ` class provides access to the internal flash. On some boards which have larger external flash (e.g. Pyboard D), it will use that instead. The ``start`` kwarg should always be specified, i.e. ``pyb.Flash(start=0)``. Note: For backwards compatibility, when constructed with no arguments (i.e. ``pyb.Flash()``), it only implements the simple block interface and reflects the virtual device presented to USB MSC (i.e. it includes a virtual partition table at the start). ESP8266 ....... The internal flash is exposed as a block device object which is created in the ``flashbdev`` module on start up. This object is by default added as a global variable so it can usually be accessed simply as ``bdev``. This implements the extended interface. ESP32 ..... The :class:`esp32.Partition` class implements a block device for partitions defined for the board. Like ESP8266, there is a global variable ``bdev`` which points to the default partition. This implements the extended interface. Custom block devices ~~~~~~~~~~~~~~~~~~~~ The following class implements a simple block device that stores its data in RAM using a ``bytearray``:: class RAMBlockDev: def __init__(self, block_size, num_blocks): self.block_size = block_size self.data = bytearray(block_size * num_blocks) def readblocks(self, block_num, buf): for i in range(len(buf)): buf[i] = self.data[block_num * self.block_size + i] def writeblocks(self, block_num, buf): for i in range(len(buf)): self.data[block_num * self.block_size + i] = buf[i] def ioctl(self, op, arg): if op == 4: # get number of blocks return len(self.data) // self.block_size if op == 5: # get block size return self.block_size It can be used as follows:: import os bdev = RAMBlockDev(512, 50) os.VfsFat.mkfs(bdev) os.mount(bdev, '/ramdisk') An example of a block device that supports both the simple and extended interface (i.e. both signatures and behaviours of the :meth:`uos.AbstractBlockDev.readblocks` and :meth:`uos.AbstractBlockDev.writeblocks` methods) is:: class RAMBlockDev: def __init__(self, block_size, num_blocks): self.block_size = block_size self.data = bytearray(block_size * num_blocks) def readblocks(self, block_num, buf, offset=0): addr = block_num * self.block_size + offset for i in range(len(buf)): buf[i] = self.data[addr + i] def writeblocks(self, block_num, buf, offset=None): if offset is None: # do erase, then write for i in range(len(buf) // self.block_size): self.ioctl(6, block_num + i) offset = 0 addr = block_num * self.block_size + offset for i in range(len(buf)): self.data[addr + i] = buf[i] def ioctl(self, op, arg): if op == 4: # block count return len(self.data) // self.block_size if op == 5: # block size return self.block_size if op == 6: # block erase return 0 As it supports the extended interface, it can be used with :class:`littlefs `:: import os bdev = RAMBlockDev(512, 50) os.VfsLfs2.mkfs(bdev) os.mount(bdev, '/ramdisk') Filesystems ----------- MicroPython ports can provide implementations of :class:`FAT `, :class:`littlefs v1 ` and :class:`littlefs v2 `. The following table shows which filesystems are included in the firmware by default for given port/board combinations, however they can be optionally enabled in a custom firmware build. ==================== ===== =========== =========== Board FAT littlefs v1 littlefs v2 ==================== ===== =========== =========== pyboard 1.0, 1.1, D Yes No Yes Other STM32 Yes No No ESP8266 Yes No No ESP32 Yes No Yes ==================== ===== =========== =========== FAT ~~~ The main advantage of the FAT filesystem is that it can be accessed over USB MSC on supported boards (e.g. STM32) without any additional drivers required on the host PC. However, FAT is not tolerant to power failure during writes and this can lead to filesystem corruption. For applications that do not require USB MSC, it is recommended to use littlefs instead. To format the entire flash using FAT:: # ESP8266 and ESP32 import os os.umount('/') os.VfsFat.mkfs(bdev) os.mount(bdev, '/') # STM32 import os, pyb os.umount('/flash') os.VfsFat.mkfs(pyb.Flash(start=0)) os.mount(pyb.Flash(start=0), '/flash') os.chdir('/flash') Littlefs ~~~~~~~~ Littlefs_ is a filesystem designed for flash-based devices, and is much more resistant to filesystem corruption. Note: It can be still be accessed over USB MSC using the `littlefs FUSE driver`_. Note that you must use the ``-b=4096`` option to override the block size. .. _littlefs FUSE driver: https://github.com/ARMmbed/littlefs-fuse/tree/master/littlefs .. _Littlefs: https://github.com/ARMmbed/littlefs To format the entire flash using littlefs v2:: # ESP8266 and ESP32 import os os.umount('/') os.VfsLfs2.mkfs(bdev) os.mount(bdev, '/') # STM32 import os, pyb os.umount('/flash') os.VfsLfs2.mkfs(pyb.Flash(start=0)) os.mount(pyb.Flash(start=0), '/flash') os.chdir('/flash') Hybrid (STM32) ~~~~~~~~~~~~~~ By using the ``start`` and ``len`` kwargs to :class:`pyb.Flash`, you can create block devices spanning a subset of the flash device. For example, to configure the first 256kiB as FAT (and available over USB MSC), and the remainder as littlefs:: import os, pyb os.umount('/flash') p1 = pyb.Flash(start=0, len=256*1024) p2 = pyb.Flash(start=256*1024) os.VfsFat.mkfs(p1) os.VfsLfs2.mkfs(p2) os.mount(p1, '/flash') os.mount(p2, '/data') os.chdir('/flash') This might be useful to make your Python files, configuration and other rarely-modified content available over USB MSC, but allowing for frequently changing application data to reside on littlefs with better resilience to power failure, etc. The partition at offset ``0`` will be mounted automatically (and the filesystem type automatically detected), but you can add:: import os, pyb p2 = pyb.Flash(start=256*1024) os.mount(p2, '/data') to ``boot.py`` to mount the data partition. Hybrid (ESP32) ~~~~~~~~~~~~~~ On ESP32, if you build custom firmware, you can modify ``partitions.csv`` to define an arbitrary partition layout. At boot, the partition named "vfs" will be mounted at ``/`` by default, but any additional partitions can be mounted in your ``boot.py`` using:: import esp32, os p = esp32.Partition.find(esp32.Partition.TYPE_DATA, label='foo') os.mount(p, '/foo')