AdGuardHome/internal/dhcpd/server.go

package dhcpd

import (
	"net"
	"time"
)

// DHCPServer - DHCP server interface
type DHCPServer interface {
	// ResetLeases - reset leases
	ResetLeases(leases []*Lease)
	// GetLeases - get leases
	GetLeases(flags int) []Lease
	// GetLeasesRef - get reference to leases array
	GetLeasesRef() []*Lease
	// AddStaticLease - add a static lease
	AddStaticLease(lease Lease) error
	// RemoveStaticLease - remove a static lease
	RemoveStaticLease(l Lease) error
	// FindMACbyIP - find a MAC address by IP address in the currently active DHCP leases
	FindMACbyIP(ip net.IP) net.HardwareAddr

	// WriteDiskConfig4 - copy disk configuration
	WriteDiskConfig4(c *V4ServerConf)
	// WriteDiskConfig6 - copy disk configuration
	WriteDiskConfig6(c *V6ServerConf)

	// Start - start server
	Start() error
	// Stop - stop server
	Stop()
}

// V4ServerConf - server configuration
type V4ServerConf struct {
	Enabled       bool   `yaml:"-"`
	InterfaceName string `yaml:"-"`

	GatewayIP  net.IP `yaml:"gateway_ip"`
	SubnetMask net.IP `yaml:"subnet_mask"`

	// The first & the last IP address for dynamic leases
	// Bytes [0..2] of the last allowed IP address must match the first IP
	RangeStart net.IP `yaml:"range_start"`
	RangeEnd   net.IP `yaml:"range_end"`

	LeaseDuration uint32 `yaml:"lease_duration"` // in seconds

	// IP conflict detector: time (ms) to wait for ICMP reply
	// 0: disable
	ICMPTimeout uint32 `yaml:"icmp_timeout_msec"`

	// Custom Options.
	//
	// Option with arbitrary hexadecimal data:
	//     DEC_CODE hex HEX_DATA
	// where DEC_CODE is a decimal DHCPv4 option code in range [1..255]
	//
	// Option with IP data (only 1 IP is supported):
	//     DEC_CODE ip IP_ADDR
	Options []string `yaml:"options"`

	ipStart    net.IP        // starting IP address for dynamic leases
	ipEnd      net.IP        // ending IP address for dynamic leases
	leaseTime  time.Duration // the time during which a dynamic lease is considered valid
	dnsIPAddrs []net.IP      // IPv4 addresses to return to DHCP clients as DNS server addresses
	routerIP   net.IP        // value for Option Router
	subnetMask net.IPMask    // value for Option SubnetMask
	options    []dhcpOption

	// Server calls this function when leases data changes
	notify func(uint32)
}

// V6ServerConf - server configuration
type V6ServerConf struct {
	Enabled       bool   `yaml:"-"`
	InterfaceName string `yaml:"-"`

	// The first IP address for dynamic leases
	// The last allowed IP address ends with 0xff byte
	RangeStart string `yaml:"range_start"`

	LeaseDuration uint32 `yaml:"lease_duration"` // in seconds

	RaSlaacOnly  bool `yaml:"ra_slaac_only"`  // send ICMPv6.RA packets without MO flags
	RaAllowSlaac bool `yaml:"ra_allow_slaac"` // send ICMPv6.RA packets with MO flags

	ipStart    net.IP        // starting IP address for dynamic leases
	leaseTime  time.Duration // the time during which a dynamic lease is considered valid
	dnsIPAddrs []net.IP      // IPv6 addresses to return to DHCP clients as DNS server addresses

	// Server calls this function when leases data changes
	notify func(uint32)
}

type dhcpOption struct {
	code uint8
	val  []byte
}