v0.9
hmage
parent
a24fbb09b9
commit
60c13a3961
48
VPS.md
48
VPS.md
|
|
@ -7,31 +7,31 @@ First let's ensure that your VPS has necessary minimal requirements, run this as
|
|||
apt-get install sudo nano bind9-host
|
||||
```
|
||||
|
||||
Go to [AdGuard DNS page](https://github.com/AdguardTeam/AdGuardHome#installation) and download binaries for your architecture (64-bit Linux in this example).
|
||||
Go to [AdGuard Home page](https://github.com/AdguardTeam/AdGuardHome#installation) and download binaries for your architecture (64-bit Linux in this example).
|
||||
|
||||
As of the time of writing, the latest version is v0.1
|
||||
As of the time of writing, the latest version is v0.9
|
||||
|
||||
To download AdGuard DNS and unpack it execute following commands:
|
||||
To download AdGuard Home and unpack it execute following commands:
|
||||
```bash
|
||||
wget https://github.com/AdguardTeam/AdGuardHome/releases/download/v0.1/AdguardDNS_0.1_linux_amd64.tar.gz
|
||||
tar xvf AdguardDNS_0.1_linux_amd64.tar.gz
|
||||
wget https://github.com/AdguardTeam/AdGuardHome/releases/download/v0.9/AdGuardHome_v0.9_linux_amd64.tar.gz
|
||||
tar xvf AdGuardHome_v0.9_linux_amd64.tar.gz
|
||||
```
|
||||
|
||||
You can find out the directory where you've unpacked it to by running these commands:
|
||||
```bash
|
||||
cd AdguardDNS
|
||||
cd AdGuardHome
|
||||
pwd
|
||||
```
|
||||
|
||||
In this example it is `/root/AdguardDNS`, now let's make it run on VPS boot:
|
||||
In this example it is `/root/AdGuardHome`, now let's make it run on VPS boot:
|
||||
```bash
|
||||
sudo nano /etc/systemd/system/adguard-dns.service
|
||||
sudo nano /etc/systemd/system/adguard-home.service
|
||||
```
|
||||
|
||||
A file will be opened, fill the file contents with this text:
|
||||
```ini
|
||||
[Unit]
|
||||
Description=AdGuard DNS
|
||||
Description=AdGuard Home
|
||||
After=syslog.target
|
||||
After=network.target
|
||||
|
||||
|
|
@ -39,20 +39,20 @@ After=network.target
|
|||
Type=simple
|
||||
User=root
|
||||
Group=root
|
||||
WorkingDirectory=/root/AdguardDNS
|
||||
ExecStart=/root/AdguardDNS/AdguardDNS --host 0.0.0.0
|
||||
WorkingDirectory=/root/AdGuardHome
|
||||
ExecStart=/root/AdGuardHome/AdGuardHome --host 0.0.0.0
|
||||
Restart=always
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
```
|
||||
|
||||
Note that I've used `/root/AdguardDNS` in that file, replace both instances with your own values there. Write to the file and close it.
|
||||
Note that I've used `/root/AdGuardHome` in that file, replace both instances with your own values there. Write to the file and close it.
|
||||
|
||||
After you're done with that, let's enable and start AdGuard DNS:
|
||||
After you're done with that, let's enable and start AdGuard Home:
|
||||
```bash
|
||||
sudo systemctl enable adguard-dns
|
||||
sudo systemctl start adguard-dns
|
||||
sudo systemctl enable adguard-home
|
||||
sudo systemctl start adguard-home
|
||||
```
|
||||
|
||||
You can verify that it's working properly by running this command:
|
||||
|
|
@ -71,26 +71,26 @@ Host doubleclick.net not found: 3(NXDOMAIN)
|
|||
```
|
||||
|
||||
## Visit the web interface
|
||||
You can access your AdGuard DNS web interface on port 3000 by typing this in your browser — `http://1.2.3.4:3000/`
|
||||
You can access your AdGuard Home web interface on port 3000 by typing this in your browser — `http://1.2.3.4:3000/`
|
||||
|
||||
Replace 1.2.3.4 with the IP address of your VPS.
|
||||
|
||||
## Configure your devices to use your AdGuard DNS
|
||||
## Configure your devices to use your AdGuard Home
|
||||
|
||||
Now, once you've established that AdGuard DNS works on your VPS, you can use it on your machine by changing system DNS settings to use your VPS's public IP address.
|
||||
Now, once you've established that AdGuard Home works on your VPS, you can use it on your machine by changing system DNS settings to use your VPS's public IP address.
|
||||
|
||||
## (optional) Password-protect web interface
|
||||
|
||||
You have an option to password-protect your AdGuard DNS's web interface so only you can access it.
|
||||
You have an option to password-protect your AdGuard Home's web interface so only you can access it.
|
||||
|
||||
To do so, stop it first:
|
||||
```bash
|
||||
sudo systemctl stop adguard-dns
|
||||
sudo systemctl stop adguard-home
|
||||
```
|
||||
|
||||
Then edit `/root/AdguardDNS/AdguardDNS.yaml` (substitute this path with your own as appropriate):
|
||||
Then edit `/root/AdGuardHome/AdGuardDNS.yaml` (substitute this path with your own as appropriate):
|
||||
```bash
|
||||
sudo nano /root/AdguardDNS/AdguardDNS.yaml
|
||||
sudo nano /root/AdGuardHome/AdGuardHome.yaml
|
||||
```
|
||||
|
||||
Find lines containing `auth_name: ""` and `auth_pass: ""` and replace them with username and password:
|
||||
|
|
@ -101,9 +101,9 @@ auth_pass: "your-secret-password"
|
|||
|
||||
Substitute name and password with your own, of course.
|
||||
|
||||
After you're done editing, save the file and start your AdGuard DNS again:
|
||||
After you're done editing, save the file and start your AdGuard Home again:
|
||||
```bash
|
||||
sudo systemctl start adguard-dns
|
||||
sudo systemctl start adguard-home
|
||||
```
|
||||
|
||||
After that, visiting web interface in a browser will require entering username and password.
|
||||
Loading…
Reference in New Issue