CnC_Remastered_Collection/TIBERIANDAWN/RAWFILE.CPP

1347 lines
54 KiB
C++

//
// Copyright 2020 Electronic Arts Inc.
//
// TiberianDawn.DLL and RedAlert.dll and corresponding source code is free
// software: you can redistribute it and/or modify it under the terms of
// the GNU General Public License as published by the Free Software Foundation,
// either version 3 of the License, or (at your option) any later version.
// TiberianDawn.DLL and RedAlert.dll and corresponding source code is distributed
// in the hope that it will be useful, but with permitted additional restrictions
// under Section 7 of the GPL. See the GNU General Public License in LICENSE.TXT
// distributed with this program. You should have received a copy of the
// GNU General Public License along with permitted additional restrictions
// with this program. If not, see https://github.com/electronicarts/CnC_Remastered_Collection
/* $Header: /CounterStrike/RAWFILE.CPP 1 3/03/97 10:25a Joe_bostic $ */
/***********************************************************************************************
*** C O N F I D E N T I A L --- W E S T W O O D S T U D I O S ***
***********************************************************************************************
* *
* Project Name : Westwood Library *
* *
* File Name : RAWFILE.CPP *
* *
* Programmer : Joe L. Bostic *
* *
* Start Date : August 8, 1994 *
* *
* Last Update : August 4, 1996 [JLB] *
* *
*---------------------------------------------------------------------------------------------*
* Functions: *
* RawFileClass::Bias -- Bias a file with a specific starting position and length. *
* RawFileClass::Close -- Perform a closure of the file. *
* RawFileClass::Create -- Creates an empty file. *
* RawFileClass::Delete -- Deletes the file object from the disk. *
* RawFileClass::Error -- Handles displaying a file error message. *
* RawFileClass::Get_Date_Time -- Gets the date and time the file was last modified. *
* RawFileClass::Is_Available -- Checks to see if the specified file is available to open. *
* RawFileClass::Open -- Assigns name and opens file in one operation. *
* RawFileClass::Open -- Opens the file object with the rights specified. *
* RawFileClass::RawFileClass -- Simple constructor for a file object. *
* RawFileClass::Raw_Seek -- Performs a seek on the unbiased file *
* RawFileClass::Read -- Reads the specified number of bytes into a memory buffer. *
* RawFileClass::Seek -- Reposition the file pointer as indicated. *
* RawFileClass::Set_Date_Time -- Sets the date and time the file was last modified. *
* RawFileClass::Set_Name -- Manually sets the name for a file object. *
* RawFileClass::Size -- Determines size of file (in bytes). *
* RawFileClass::Write -- Writes the specified data to the buffer specified. *
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <direct.h>
#include <share.h>
#include <stddef.h>
#include "rawfile.h"
#ifndef WIN32
#include <fcntl.h>
#include <io.h>
#include <dos.h>
extern short Hard_Error_Occured;
#endif
/***********************************************************************************************
* RawFileClass::Error -- Handles displaying a file error message. *
* *
* Display an error message as indicated. If it is allowed to retry, then pressing a key *
* will return from this function. Otherwise, it will exit the program with "exit()". *
* *
* INPUT: error -- The error number (same as the DOSERR.H error numbers). *
* *
* canretry -- Can this routine exit normally so that retrying can occur? If this is *
* false, then the program WILL exit in this routine. *
* *
* filename -- Optional filename to report with this error. If no filename is *
* supplied, then no filename is listed in the error message. *
* *
* OUTPUT: none, but this routine might not return at all if the "canretry" parameter is *
* false or the player pressed ESC. *
* *
* WARNINGS: This routine may not return at all. It handles being in text mode as well as *
* if in a graphic mode. *
* *
* HISTORY: *
* 10/17/1994 JLB : Created. *
*=============================================================================================*/
void RawFileClass::Error(int , int , char const * )
{
}
/***********************************************************************************************
* RawFileClass::RawFileClass -- Simple constructor for a file object. *
* *
* This constructor is called when a file object is created with a supplied filename, but *
* not opened at the same time. In this case, an assumption is made that the supplied *
* filename is a constant string. A duplicate of the filename string is not created since *
* it would be wasteful in that case. *
* *
* INPUT: filename -- The filename to assign to this file object. *
* *
* OUTPUT: none *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 10/17/1994 JLB : Created. *
*=============================================================================================*/
RawFileClass::RawFileClass(char const * filename) :
Rights(0),
BiasStart(0),
BiasLength(-1),
Handle(NULL_HANDLE),
Filename(filename),
Date(0),
Time(0),
Allocated(false)
{
}
/***********************************************************************************************
* RawFileClass::Set_Name -- Manually sets the name for a file object. *
* *
* This routine will set the name for the file object to the name specified. This name is *
* duplicated in free store. This allows the supplied name to be a temporarily constructed *
* text string. Setting the name in this fashion doesn't affect the closed or opened state *
* of the file. *
* *
* INPUT: filename -- The filename to assign to this file object. *
* *
* OUTPUT: Returns with a pointer to the allocated copy of this filename. This pointer is *
* guaranteed to remain valid for the duration of this file object or until the name *
* is changed -- whichever is sooner. *
* *
* WARNINGS: Because of the allocation this routine must perform, memory could become *
* fragmented. *
* *
* HISTORY: *
* 10/17/1994 JLB : Created. *
*=============================================================================================*/
#pragma warning(disable:4996)
char const * RawFileClass::Set_Name(char const * filename)
{
if (Filename != NULL && Allocated) {
free((char *)Filename);
((char *&)Filename) = 0;
Allocated = false;
}
if (filename == NULL) return(NULL);
Bias(0);
Filename = strdup(filename);
if (Filename == NULL) {
Error(ENOMEM, false, filename);
}
Allocated = true;
return(Filename);
}
/***********************************************************************************************
* RawFileClass::Open -- Assigns name and opens file in one operation. *
* *
* This routine will assign the specified filename to the file object and open it at the *
* same time. If the file object was already open, then it will be closed first. If the *
* file object was previously assigned a filename, then it will be replaced with the new *
* name. Typically, this routine is used when an anonymous file object has been crated and *
* now it needs to be assigned a name and opened. *
* *
* INPUT: filename -- The filename to assign to this file object. *
* *
* rights -- The open file access rights to use. *
* *
* OUTPUT: bool; Was the file opened? The return value of this is moot, since the open file *
* is designed to never return unless it succeeded. *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 10/17/1994 JLB : Created. *
*=============================================================================================*/
int RawFileClass::Open(char const * filename, int rights)
{
Set_Name(filename);
return(Open(rights));
}
/***********************************************************************************************
* RawFileClass::Open -- Opens the file object with the rights specified. *
* *
* This routine is used to open the specified file object with the access rights indicated. *
* This only works if the file has already been assigned a filename. It is guaranteed, by *
* the error handler, that this routine will always return with success. *
* *
* INPUT: rights -- The file access rights to use when opening this file. This is a *
* combination of READ and/or WRITE bit flags. *
* *
* OUTPUT: bool; Was the file opened successfully? This will always return true by reason of *
* the error handler. *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 10/17/1994 JLB : Created. *
*=============================================================================================*/
int RawFileClass::Open(int rights)
{
Close();
/*
** Verify that there is a filename associated with this file object. If not, then this is a
** big error condition.
*/
if (Filename == NULL) {
Error(ENOENT, false);
}
/*
** Record the access rights used for this open call. These rights will be used if the
** file object is duplicated.
*/
Rights = rights;
/*
** Repetitively try to open the file. Abort if a fatal error condition occurs.
*/
for (;;) {
/*
** Try to open the file according to the access rights specified.
*/
#ifndef WIN32
Hard_Error_Occured = 0;
#endif
switch (rights) {
/*
** If the access rights are not recognized, then report this as
** an invalid access code.
*/
default:
errno = EINVAL;
break;
case READ:
#ifdef WIN32
Handle = CreateFile(Filename, GENERIC_READ, FILE_SHARE_READ,
NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
#else
_dos_open(Filename, O_RDONLY|SH_DENYNO, &Handle);
#endif
break;
case WRITE:
#ifdef WIN32
Handle = CreateFile(Filename, GENERIC_WRITE, 0,
NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL);
#else
_dos_creat(Filename, 0, &Handle);
#endif
break;
case READ|WRITE:
#ifdef WIN32
Handle = CreateFile(Filename, GENERIC_READ | GENERIC_WRITE, 0,
NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL);
#else
_dos_open(Filename, O_RDWR|O_CREAT|SH_DENYWR, &Handle);
#endif
break;
}
/*
** Biased files must be positioned past the bias start position.
*/
if (BiasStart != 0 || BiasLength != -1) {
Seek(0, SEEK_SET);
}
/*
** If the handle indicates the file is not open, then this is an error condition.
** For the case of the file cannot be found, then allow a retry. All other cases
** are fatal.
*/
if (Handle == NULL_HANDLE) {
#ifdef WIN32
// return(false);
Error(GetLastError(), false, Filename);
// continue;
#else
/*
** If this flag is set, then some hard error occurred. Just assume that the error
** is probably a removed CD-ROM and allow a retry.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
} else {
if (errno == ENOENT) {
Error(ENOENT, true, Filename);
} else {
Error(errno, false, Filename);
}
}
continue;
#endif
}
break;
}
return(true);
}
/***********************************************************************************************
* RawFileClass::Is_Available -- Checks to see if the specified file is available to open. *
* *
* This routine will examine the disk system to see if the specified file can be opened *
* or not. Use this routine before opening a file in order to make sure that is available *
* or to perform other necessary actions. *
* *
* INPUT: force -- Should this routine keep retrying until the file becomes available? If *
* in this case it doesn't become available, then the program will abort. *
* *
* OUTPUT: bool; Is the file available to be opened? *
* *
* WARNINGS: Depending on the parameter passed in, this routine may never return. *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
int RawFileClass::Is_Available(int forced)
{
#ifndef WIN32
bool open_failed;
#endif
if (Filename == NULL) return(false);
/*
** If the file is already open, then is must have already passed the availability check.
** Return true in this case.
*/
if (Is_Open()) return(true);
/*
** If this is a forced check, then go through the normal open channels, since those
** channels ensure that the file must exist.
*/
if (forced) {
RawFileClass::Open(READ);
RawFileClass::Close();
return(true);
}
/*
** Perform a raw open of the file. If this open fails for ANY REASON, including a missing
** CD-ROM, this routine will return a failure condition. In all but the missing file
** condition, go through the normal error recover channels.
*/
for (;;) {
#ifdef WIN32
Handle = CreateFile(Filename, GENERIC_READ, FILE_SHARE_READ,
NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
if (Handle == NULL_HANDLE) {
return(false);
}
break;
#else
Hard_Error_Occured = 0;
open_failed = _dos_open(Filename, O_RDONLY|SH_DENYNO, &Handle);
/*
** If DOS reports that everything is just fine except that the file is not present,
** then return with this fact. Any other case will fall through to the error handler
** routine.
*/
if (open_failed && errno == ENOENT) return(false);
/*
** If we got an access error it could be because there is no cd in
** the drive. Call the error handler but allow a continue if it
** returns.
*/
if (open_failed && errno == EACCES) {
Error(errno, true, Filename);
continue;
}
/*
** If the file could not be found, then return with this information. If a more
** serious error occurred, then display the error message and abort.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
continue;
} else {
if (open_failed) {
/*
** An unhandled error condition is fatal. Display the error message and then
** abort.
*/
Error(errno, false, Filename);
}
}
if (!open_failed) break;
#endif
}
/*
** Since the file could be opened, then close it and return that the file exists.
*/
#ifdef WIN32
if (!CloseHandle(Handle)) {
Error(GetLastError(), false, Filename);
}
#else
if (_dos_close(Handle)) {
Error(errno, false, Filename);
}
#endif
Handle = NULL_HANDLE;
return(true);
}
/***********************************************************************************************
* RawFileClass::Close -- Perform a closure of the file. *
* *
* Close the file object. In the rare case of an error, handle it as appropriate. *
* *
* INPUT: none *
* *
* OUTPUT: none *
* *
* WARNINGS: Some rare error conditions may cause this routine to abort the program. *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
void RawFileClass::Close(void)
{
/*
** If the file is open, then close it. If the file is already closed, then just return. This
** isn't considered an error condition.
*/
if (Is_Open()) {
#ifdef WIN32
/*
** Try to close the file. If there was an error (who knows what that could be), then
** call the error routine.
*/
if (!CloseHandle(Handle)) {
Error(GetLastError(), false, Filename);
}
#else
for (;;) {
/*
** Close the file. If there was an error in the close operation -- abort.
*/
Hard_Error_Occured = 0;
if (_dos_close(Handle)) {
/*
** By definition, this error can only be a bad file handle. This a fatal condition
** of course, so abort with an error message.
*/
Error(errno, false, Filename);
}
/*
** In the condition (if it is even possible) of a hard error occurring, then
** assume it is the case of missing media. Display an error message and try
** again if indicated.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
continue;
}
break;
}
#endif
/*
** At this point the file must have been closed. Mark the file as empty and return.
*/
Handle = NULL_HANDLE;
}
}
/***********************************************************************************************
* RawFileClass::Read -- Reads the specified number of bytes into a memory buffer. *
* *
* This routine will read the specified number of bytes and place the data into the buffer *
* indicated. It is legal to call this routine with a request for more bytes than are in *
* the file. This condition can result in fewer bytes being read than requested. Determine *
* this by examining the return value. *
* *
* INPUT: buffer -- Pointer to the buffer to read data into. If NULL is passed, no read *
* is performed. *
* *
* size -- The number of bytes to read. If NULL is passed, then no read is *
* performed. *
* *
* OUTPUT: Returns with the number of bytes read into the buffer. If this number is less *
* than requested, it indicates that the file has been exhausted. *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
long RawFileClass::Read(void * buffer, long size)
{
long bytesread = 0; // Running count of the number of bytes read into the buffer.
int opened = false; // Was the file opened by this routine?
/*
** If the file isn't opened, open it. This serves as a convenience
** for the programmer.
*/
if (!Is_Open()) {
/*
** The error check here is moot. Open will never return unless it succeeded.
*/
if (!Open(READ)) {
return(0);
}
opened = true;
}
/*
** A biased file has the requested read length limited to the bias length of
** the file.
*/
if (BiasLength != -1) {
int remainder = BiasLength - Seek(0);
size = size < remainder ? size : remainder;
}
#ifdef WIN32
long total = 0;
while (size > 0) {
bytesread = 0;
SetErrorMode(SEM_FAILCRITICALERRORS);
if (!ReadFile(Handle, buffer, size, &(unsigned long&)bytesread, NULL)) {
size -= bytesread;
total += bytesread;
Error(GetLastError(), true, Filename);
SetErrorMode(0);
continue;
}
SetErrorMode(0);
size -= bytesread;
total += bytesread;
if (bytesread == 0) break;
}
bytesread = total;
#else
int readresult;
/*
** Read the file in convenient chunk sizes. When the actual number
** of bytes read does not match the desired, then assume that the file
** is exhausted and bail. This loop was adjusted to take into
** consideration the fact that "read" returns a SIGNED value whereas
** it takes an UNSIGNED value as the byte count.
*/
while (size) {
unsigned desired; // Bytes desired to be read this pass.
unsigned actual; // Actual number of bytes read.
/*
** Break the read request into chunks no bigger than the low level DOS read
** can handle.
*/
desired = size < 32000L ? size : 32000L;
Hard_Error_Occured = 0;
readresult = _dos_read(Handle, buffer, desired, &actual);
/*
** If a hard error occurred, then assume that it is the case of the CD-ROM or
** floppy media having been removed. Display the error and retry as directed.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
continue; // Not technically needed, but to be consistent...
} else {
/*
** If negative one is returned from the read operation, then this indicates
** either a bad file number or invalid access. These are fatal conditions, so
** display the error and then abort.
*/
if (readresult != 0) {
Error(errno, false, Filename);
} else {
/*
** No error occurred during the read. Adjust the pointers and size counters and
** loop again if more data is needed to be read.
*/
buffer = (char *)buffer + actual;
bytesread += actual;
size -= actual;
if (actual != desired) break; // No more data?
}
}
}
#endif //WIN32
/*
** Close the file if it was opened by this routine and return
** the actual number of bytes read into the buffer.
*/
if (opened) Close();
return(bytesread);
}
/***********************************************************************************************
* RawFileClass::Write -- Writes the specified data to the buffer specified. *
* *
* This routine will write the data specified to the file. *
* *
* INPUT: buffer -- The buffer that holds the data to write. *
* *
* size -- The number of bytes to write to the file. *
* *
* OUTPUT: Returns with the number of bytes written to the file. This routine catches the *
* case of a disk full condition, so this routine will always return with the number *
* matching the size request. *
* *
* WARNINGS: A fatal file condition could cause this routine to never return. *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
long RawFileClass::Write(void const * buffer, long size)
{
long bytesread = 0;
int opened = false; // Was the file manually opened?
/*
** Check to open status of the file. If the file is open, then merely write to
** it. Otherwise, open the file for writing and then close the file when the
** output is finished.
*/
if (!Is_Open()) {
if (!Open(WRITE)) {
return(0);
}
opened = true;
}
#ifdef WIN32
if (!WriteFile(Handle, buffer, size, &(unsigned long&)bytesread, NULL)) {
Error(GetLastError(), false, Filename);
}
#else
int writeresult;
/*
** Write the data to the file in chunks no bigger than what the low level DOS write
** can handle.
*/
while (size) {
unsigned desired; // Bytes desired to be write this pass.
unsigned actual; // Actual number of bytes written.
Hard_Error_Occured = 0;
// desired = (unsigned)MIN(size, Transfer_Block_Size());
desired = size;
writeresult = _dos_write(Handle, buffer, desired, &actual);
/*
** If a hard error occurred, then assume it is the case of the media being
** removed. Print the error message an retry as directed.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
continue; // Not technically needed, but to be consistent...
} else {
/*
** If negative one is returned by the DOS read, then this indicates a bad file
** handle or invalid access. Either condition is fatal -- display error condition
** and abort.
*/
if (writeresult != 0) {
Error(errno, false, Filename);
} else {
/*
** A successful write occurred. Update pointers and byte counter as appropriate.
*/
buffer = (char *)buffer + actual;
bytesread += actual;
size -= actual;
/*
** If the actual bytes written is less than requested, assume this is a case of
** the disk being full. Consider this a fatal error condition.
*/
if (actual != desired) {
Error(ENOSPC, false, Filename);
}
}
}
}
#endif //WIN32
/*
** Fixup the bias length if necessary.
*/
if (BiasLength != -1) {
if (Raw_Seek(0) > BiasStart+BiasLength) {
BiasLength = Raw_Seek(0) - BiasStart;
}
}
/*
** If this routine had to open the file, then close it before returning.
*/
if (opened) {
Close();
}
/*
** Return with the number of bytes written. This will always be the number of bytes
** requested, since the case of the disk being full is caught by this routine.
*/
return(bytesread);
}
/***********************************************************************************************
* RawFileClass::Seek -- Reposition the file pointer as indicated. *
* *
* Use this routine to move the filepointer to the position indicated. It can move either *
* relative to current position or absolute from the beginning or ending of the file. This *
* routine will only return if it successfully performed the seek. *
* *
* INPUT: pos -- The position to seek to. This is interpreted as relative to the position *
* indicated by the "dir" parameter. *
* *
* dir -- The relative position to relate the seek to. This can be either SEEK_SET *
* for the beginning of the file, SEEK_CUR for the current position, or *
* SEEK_END for the end of the file. *
* *
* OUTPUT: This routine returns the position that the seek ended up at. *
* *
* WARNINGS: If there was a file error, then this routine might never return. *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
long RawFileClass::Seek(long pos, int dir)
{
/*
** A file that is biased will have a seek operation modified so that the file appears to
** exist only within the bias range. All bytes outside of this range appear to be
** non-existant.
*/
if (BiasLength != -1) {
switch (dir) {
case SEEK_SET:
if (pos > BiasLength) {
pos = BiasLength;
}
pos += BiasStart;
break;
case SEEK_CUR:
break;
case SEEK_END:
dir = SEEK_SET;
pos += BiasStart + BiasLength;
// pos = (pos <= BiasStart+BiasLength) ? pos : BiasStart+BiasLength;
// pos = (pos >= BiasStart) ? pos : BiasStart;
break;
}
/*
** Perform the modified raw seek into the file.
*/
long newpos = Raw_Seek(pos, dir) - BiasStart;
/*
** Perform a final double check to make sure the file position fits with the bias range.
*/
if (newpos < 0) {
newpos = Raw_Seek(BiasStart, SEEK_SET) - BiasStart;
}
if (newpos > BiasLength) {
newpos = Raw_Seek(BiasStart+BiasLength, SEEK_SET) - BiasStart;
}
return(newpos);
}
/*
** If the file is not biased in any fashion, then the normal seek logic will
** work just fine.
*/
return(Raw_Seek(pos, dir));
}
/***********************************************************************************************
* RawFileClass::Size -- Determines size of file (in bytes). *
* *
* Use this routine to determine the size of the file. The file must exist or this is an *
* error condition. *
* *
* INPUT: none *
* *
* OUTPUT: Returns with the number of bytes in the file. *
* *
* WARNINGS: This routine handles error conditions and will not return unless the file *
* exists and can successfully be queried for file length. *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
long RawFileClass::Size(void)
{
long size = 0;
/*
** A biased file already has its length determined.
*/
if (BiasLength != -1) {
return(BiasLength);
}
/*
** If the file is open, then proceed normally.
*/
if (Is_Open()) {
#ifdef WIN32
size = GetFileSize(Handle, NULL);
/*
** If there was in internal error, then call the error function.
*/
if (size == 0xFFFFFFFF) {
Error(GetLastError(), false, Filename);
}
#else
/*
** Repetitively try to determine the file size until a fatal error condition or success
** is achieved.
*/
for (;;) {
Hard_Error_Occured = 0;
size = filelength(Handle);
/*
** If a hard error occurred, then assume it is the case of removed media. Display an
** error condition and allow retry.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
continue;
} else {
if (size == -1) {
Error(errno, false, Filename);
}
}
break;
}
#endif
} else {
/*
** If the file wasn't open, then open the file and call this routine again. Count on
** the fact that the open function must succeed.
*/
if (Open()) {
size = Size();
/*
** Since we needed to open the file we must remember to close the file when the
** size has been determined.
*/
Close();
}
}
BiasLength = size-BiasStart;
return(BiasLength);
}
/***********************************************************************************************
* RawFileClass::Create -- Creates an empty file. *
* *
* This routine will create an empty file from the file object. The file object's filename *
* must already have been assigned before this routine will function. *
* *
* INPUT: none *
* *
* OUTPUT: bool; Was the file successfully created? This routine will always return true. *
* *
* WARNINGS: A fatal error condition could occur with this routine. Especially if the disk *
* is full or a read-only media was selected. *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
int RawFileClass::Create(void)
{
Close();
if (Open(WRITE)) {
/*
** A biased file must be at least as long as the bias offset. Seeking to the
** appropriate start offset has the effect of lengthening the file to the
** correct length.
*/
if (BiasLength != -1) {
Seek(0, SEEK_SET);
}
Close();
return(true);
}
return(false);
}
/***********************************************************************************************
* RawFileClass::Delete -- Deletes the file object from the disk. *
* *
* This routine will delete the file object from the disk. If the file object doesn't *
* exist, then this routine will return as if it had succeeded (since the effect is the *
* same). *
* *
* INPUT: none *
* *
* OUTPUT: bool; Was the file deleted? If the file was already missing, the this value will *
* be false. *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 10/18/1994 JLB : Created. *
*=============================================================================================*/
int RawFileClass::Delete(void)
{
/*
** If the file was open, then it must be closed first.
*/
Close();
/*
** If there is no filename associated with this object, then this indicates a fatal error
** condition. Report this and abort.
*/
if (!Filename) {
Error(ENOENT, false);
}
/*
** Repetitively try to delete the file if possible. Either return with success, or
** abort the program with an error.
*/
for (;;) {
/*
** If the file is already missing, then return with this fact. No action is necessary.
** This can occur as this section loops if the file exists on a floppy and the floppy
** was removed, the file deleted on another machine, and then the floppy was
** reinserted. Admittedly, this is a rare case, but is handled here.
*/
if (!Is_Available()) {
return(false);
}
#ifdef WIN32
if (!DeleteFile(Filename)) {
Error(GetLastError(), false, Filename);
return(false);
}
#else
Hard_Error_Occured = 0;
if (remove(Filename) == -1) {
/*
** If a hard error occurred, then assume that the media has been removed. Display
** error message and retry as directed.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
continue;
}
/*
** If at this point, DOS says the file doesn't exist, then just exit with this
** fact. It should have been caught earlier, but in any case, this is a legal
** condition.
*/
if (errno == ENOENT) break;
/*
** The only way it can reach this point is if DOS indicates that access is denied
** on the file. This occurs when trying to delete a file on a read-only media such
** as a CD-ROM. Report this as a fatal error and then abort.
*/
Error(errno, false, Filename);
}
#endif
break;
}
/*
** DOS reports that the file was successfully deleted. Return with this fact.
*/
return(true);
}
/***********************************************************************************************
* RawFileClass::Get_Date_Time -- Gets the date and time the file was last modified. *
* *
* Use this routine to get the date and time of the file. *
* *
* INPUT: none *
* *
* OUTPUT: Returns with the file date and time as a long. *
* Use the YEAR(long), MONTH(),.... *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 11/14/1995 DRD : Created. *
* 07/13/1996 JLB : Handles win32 method. *
*=============================================================================================*/
unsigned long RawFileClass::Get_Date_Time(void)
{
#ifdef WIN32
BY_HANDLE_FILE_INFORMATION info;
if (GetFileInformationByHandle(Handle, &info)) {
WORD dosdate;
WORD dostime;
FileTimeToDosDateTime(&info.ftLastWriteTime, &dosdate, &dostime);
return((dosdate << 16) | dostime);
}
return(0);
#else
unsigned short time;
unsigned short date;
unsigned long datetime = 0;
//
// If the file is open, then proceed normally.
//
if ( RawFileClass::Is_Open() ) {
if ( _dos_getftime( Handle, &date, &time ) ) {
//
// return 0 indicating error with no date and time
//
return( datetime );
}
} else {
//
// If the file wasn't open, then see if the file exists.
//
if ( RawFileClass::Is_Available() ) {
RawFileClass::Open();
if ( _dos_getftime( Handle, &date, &time ) ) {
RawFileClass::Close();
//
// return 0 indicating error with no date and time
//
return( datetime );
}
RawFileClass::Close();
} else {
//
// return 0 indicating error with no date and time
//
return( datetime );
}
}
//
// combine the date and time as a long
//
datetime = (date << 16) + time;
return( datetime );
#endif
}
/***********************************************************************************************
* RawFileClass::Set_Date_Time -- Sets the date and time the file was last modified. *
* *
* Use this routine to set the date and time of the file. *
* *
* INPUT: the file date and time as a long *
* *
* OUTPUT: successful or not if the file date and time was changed. *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 11/14/1995 DRD : Created. *
* 07/13/1996 JLB : Handles win 32 method *
*=============================================================================================*/
bool RawFileClass::Set_Date_Time(unsigned long datetime)
{
#ifdef WIN32
if (RawFileClass::Is_Open()) {
BY_HANDLE_FILE_INFORMATION info;
if (GetFileInformationByHandle(Handle, &info)) {
FILETIME filetime;
if (DosDateTimeToFileTime((WORD)(datetime >> 16), (WORD)(datetime & 0x0FFFF), &filetime)) {
return(SetFileTime(Handle, &info.ftCreationTime, &filetime, &filetime));
}
}
}
return(false);
#else
unsigned short time;
unsigned short date;
//
// If the file is open, then proceed normally.
//
if ( RawFileClass::Is_Open() ) {
//
// only set the date and time if open for READ only
//
if ( Rights == READ ) {
time = (unsigned short)(datetime & 0xFFFF);
date = (unsigned short)((datetime >> 16) & 0xFFFF);
if ( !_dos_setftime( Handle, date, time ) ) {
//
// return true indicating success
//
return( true );
}
}
} else {
//
// If the file wasn't open, then see if the file exists.
//
if ( RawFileClass::Is_Available() ) {
RawFileClass::Open();
time = (unsigned short)(datetime & 0xFFFF);
date = (unsigned short)((datetime >> 16) & 0xFFFF);
if ( !_dos_setftime( Handle, date, time ) ) {
RawFileClass::Close();
//
// return true indicating success
//
return( true );
}
RawFileClass::Close();
}
}
//
// return false indicating error
//
return( false );
#endif
}
/***********************************************************************************************
* RawFileClass::Bias -- Bias a file with a specific starting position and length. *
* *
* This will bias a file by giving it an artificial starting position and length. By *
* using this routine, it is possible to 'fool' the file into ignoring a header and *
* trailing extra data. An example of this would be a file inside of a mixfile. *
* *
* INPUT: start -- The starting offset that will now be considered the start of the *
* file. *
* *
* length -- The forced length of the file. For files that are opened for write, *
* this serves as the artificial constraint on the file's length. For *
* files opened for read, this limits the usable file size. *
* *
* OUTPUT: none *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 06/02/1996 JLB : Created. *
*=============================================================================================*/
void RawFileClass::Bias(int start, int length)
{
if (start == 0) {
BiasStart = 0;
BiasLength = -1;
return;
}
BiasLength = RawFileClass::Size();
BiasStart += start;
if (length != -1) {
BiasLength = BiasLength < length ? BiasLength : length;
}
BiasLength = BiasLength > 0 ? BiasLength : 0;
/*
** Move the current file offset to a legal position if necessary and the
** file was open.
*/
if (Is_Open()) {
RawFileClass::Seek(0, SEEK_SET);
}
}
/***********************************************************************************************
* RawFileClass::Raw_Seek -- Performs a seek on the unbiased file *
* *
* This will perform a seek on the file as if it were unbiased. This is in spite of any *
* bias setting the file may have. The ability to perform a raw seek in this fasion is *
* necessary to maintain the bias ability. *
* *
* INPUT: pos -- The position to seek the file relative to the "dir" parameter. *
* *
* dir -- The origin of the seek operation. *
* *
* OUTPUT: Returns with the new position of the seek operation. *
* *
* WARNINGS: none *
* *
* HISTORY: *
* 08/04/1996 JLB : Created. *
*=============================================================================================*/
long RawFileClass::Raw_Seek(long pos, int dir)
{
/*
** If the file isn't opened, then this is a fatal error condition.
*/
if (!Is_Open()) {
Error(EBADF, false, Filename);
}
#ifdef WIN32
switch (dir) {
case SEEK_SET:
dir = FILE_BEGIN;
break;
case SEEK_CUR:
dir = FILE_CURRENT;
break;
case SEEK_END:
dir = FILE_END;
break;
}
pos = SetFilePointer(Handle, pos, NULL, dir);
/*
** If there was an error in the seek, then bail with an error condition.
*/
if (pos == 0xFFFFFFFF) {
Error(GetLastError(), false, Filename);
}
#else
/*
** Keep trying to seek until a non-retry condition occurs.
*/
for (;;) {
/*
** Perform the low level seek on the file.
*/
Hard_Error_Occured = 0;
pos = lseek(Handle, pos, dir);
/*
** If a hard error occurred, then assume that it is the case of removed media. Display
** error message and retry.
*/
if (Hard_Error_Occured) {
Error(Hard_Error_Occured, true, Filename);
continue;
} else {
/*
** A negative one indicates a fatal error with the seek operation. Display error
** condition and then abort.
*/
if (pos == -1) {
Error(errno, false, Filename);
}
}
break;
}
#endif
/*
** Return with the new position of the file. This will range between zero and the number of
** bytes the file contains.
*/
return(pos);
}