mirrors
/
Labrador
mirror of https://github.com/EspoTek/Labrador.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Update README.md

This commit is contained in:
Chris Esposito 2021-08-18 15:17:38 +10:00 committed by GitHub
parent 14a1601c45
commit 4d1cd1b672
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 9 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
README.md
View File

@ -1,11 +1,13 @@
# What is it? # What is it?
The EspoTek Labrador is an open-source board that converts your PC, Raspberry Pi or Android Smartphone and into a full-featured electronics lab bench, complete with oscilloscope, signal generator and more. The [EspoTek Labrador](http://espotek.com/labrador) is an open-source board that turns your PC, Raspberry Pi or Android Smartphone and into a full-featured electronics lab bench, complete with oscilloscope, signal generator and more.
More information available at:
http://espotek.com/labrador
This repo hosts all of the software and hardware that makes Labrador possible. This repo hosts all of the software and hardware that makes Labrador possible.
# Tutorial
If you're new to Labrador or oscilloscopes in general, I strongly recommend checking out the fantastic tutorial series produced by Lief Koepsel:
https://www.wellys.com/posts/courses_electronics/
It features well-written, rich articles as well as video content that explains everything more clearly than I ever could!
# Getting Started # Getting Started
To download binary (executable) versions of the software, go to: To download binary (executable) versions of the software, go to:
https://github.com/espotek/labrador/releases https://github.com/espotek/labrador/releases
@ -13,17 +15,14 @@ https://github.com/espotek/labrador/releases
For the documentation, please visit: For the documentation, please visit:
https://github.com/espotek/labrador/wiki https://github.com/espotek/labrador/wiki
If you're new to Labrador or oscilloscopes in general, I strongly recommend checking out the fantastic tutorial series produced by Lief Koepsel:
https://www.wellys.com/posts/courses_electronics/
It features well-written, rich articles as well as video content that explains everything more clearly than I ever could!
# Raspberry Pi Build # Raspberry Pi Build
***Please note that the Raspbian version 9 (Stretch) or later is required to install this software.*** ***Please note that the Raspbian version 9 (Stretch) or later is required to install this software.***
To install Labrador on the Raspberry Pi, open a terminal and paste the following command: To install Labrador on the Raspberry Pi, open a terminal and paste the following command:
`wget -O /tmp/labrador_bootstrap_pi https://raw.githubusercontent.com/EspoTek/Labrador/master/labrador_bootstrap_pi && sudo chmod +x /tmp/labrador_bootstrap_pi && sudo /tmp/labrador_bootstrap_pi` `wget -O /tmp/labrador_bootstrap_pi https://raw.githubusercontent.com/EspoTek/Labrador/master/labrador_bootstrap_pi && sudo chmod +x /tmp/labrador_bootstrap_pi && sudo /tmp/labrador_bootstrap_pi`
This will automatically download, compile and installs the latest version of the Labrador software from source. After running it, a desktop entry will appear for the Labrador software (under Education), and running the `labrador` command from the terminal will launch the software interface. This will automatically download, compile and install the latest version of the Labrador software from source. The whole process will take around 20-30 minutes, so don't forget to pack a snack!
After running it, a desktop entry will appear for the Labrador software (under Education), and running the `labrador` command from the terminal will launch the software interface.
# Additional Extras # Additional Extras
There are community contributed 3D printable cases available at Thingiverse, courtesy of SpaceBex and Bostwickenator: There are community contributed 3D printable cases available at Thingiverse, courtesy of SpaceBex and Bostwickenator:
@ -57,7 +56,7 @@ All Microcontroller software files, with the exception of those provided by Atme
All hardware files (schematics, PCB) are licenced under Creative Commons 4.0 (CC BY-NC-SA). https://creativecommons.org/licenses/by-nc-sa/4.0/ All hardware files (schematics, PCB) are licenced under Creative Commons 4.0 (CC BY-NC-SA). https://creativecommons.org/licenses/by-nc-sa/4.0/
# Collaboration # Collaboration
If you want to submit a Pull Request, bug report or feature request please feel free to do so here at GitHub. If you want to submit a Pull Request, bug report or feature request please feel free to do so here at GitHub.
If you just want to say hello and remind me that people are actually using my product (or if you just don't want to make a GitHub account), please email admin@espotek.com If you just want to say hello and remind me that people are actually using my product (or if you just don't want to make a GitHub account), please email admin@espotek.com
Thanks to all. Thanks to all.