mirrors
/
Labrador
mirror of https://github.com/EspoTek/Labrador.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Mirror of EspoTek/Labrador@github.com - Drivers and firmware for the Labrador board
176 Commits 8 Branches 9 Tags 309 MiB
C++ 57.5%
C 32.7%
Makefile 4.5%
Fortran 4.1%
QMake 0.4%
Other 0.8%
Go to file
EspoTek af9773f7e1 gitignore 2017-11-07 15:06:50 +11:00
AVR Code Cleaned junk out of repo. 2017-10-21 16:11:49 +11:00
Desktop_Interface added RMS measure, fixed the max/min/mean when AC coupling enabled 2017-11-07 15:06:40 +11:00
PCB Cleaned junk out of repo. 2017-10-21 16:11:49 +11:00
.gitignore gitignore 2017-11-07 15:06:50 +11:00
README.md Update README.md 2017-10-26 09:53:10 +11:00

README.md

Welcome to the GitHub page for the EspoTek Labrador!

http://espotek.com/labrador

https://www.crowdsupply.com/espotek/labrador

Build Instructions

I use Qt Creator to build the software interface. Open Desktop Interface/Labrador.pro, then Clean All -> Run qmake -> Build All. Others have built it manually, though. Just make sure you have Qt 5.6 or later.

For the AVR software, I use Atmel Studio 7. Just load up the .atsln and push F7. Again, you can use avr-gcc if you don't want to install a full IDE.

The PCB files were done in KiCAD 4.0.

Documentation and Binary

All documentation and binary files are currently hosted here: https://drive.google.com/drive/u/0/folders/0B7U0ulRLHf8cRVBkeFc2SHpUOGs

Licence

All software files are licenced under GNU GPL v3. https://www.gnu.org/licenses/gpl.html

All hardware files (schematics, PCB) are licenced under Creative Commons 4.0 (CC BY-NC-SA). https://creativecommons.org/licenses/by-nc-sa/4.0/

The intention is to move to a less restrictive licence in future, where commercial hardware derivatives are allowed but the use of the Labrador name or any branding is not. If anyone knows how to implement such a licence, I'm all ears.

Known bugs.

Most of the main bugs have now been fixed, including all synchronisation issues. Please open an issue or email me at admin@espotek.com if you're aware of any in particular.

Collaboration

Mailing list is here and open to all who wish to collaborate on the project: https://groups.google.com/forum/#!forum/labrador-devel Or you can just use GitHub's issues. :)

Cleanup Notice

Please note that this repository was cleaned up on 21/10/17. This significantly reduced the size - from over 200MB to about 3MB, but I was fairly aggressive and it's possible that something was deleted that shouldn't have been. For this reason, the old, unclean repo has been preserved at:

https://github.com/EspoTek/Labrador_backup

Thanks to all.

~Chris