Tasmota/tasmota/xsns_58_GPS.ino

/*
  xsns_58_GPS_UBX.ino - GPS UBLOX support for Sonoff-Tasmota

  Copyright (C) 2019  Theo Arends, Christian Baars and Adrian Scillato

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.

  --------------------------------------------------------------------------------------------
  Version Date      Action    Description
  --------------------------------------------------------------------------------------------

  0.9.1.0 20191216  integrate - Added pin specifications from Tasmota WEB UI. Minor tweaks.
  ---
  0.9.0.0 20190817  started   - further development by Christian Baars  - https://github.com/Staars/Sonoff-Tasmota
                    forked    - from arendst/tasmota                    - https://github.com/arendst/Sonoff-Tasmota
                    base      - code base from arendst and              - https://www.youtube.com/watch?v=TwhCX0c8Xe0
  
## GPS-driver for the Ublox-series 6-8  
Driver is tested on a NEO-6m and a Beitian-220. Series 7 should work too. This adds only about 6kb to the program size, because the efficient UBX-protocol is used. These modules are quite cheap, starting at about 3.50€ for the NEO-6m.

## Features:  
- get position and time data
- sets system time automatically and Settings.latitude and Settings.longitude via command  
- can log postion data with timestamp to flash with a small memory footprint of only 12 Bytes per record
- constructs a GPX-file for download of this data  
- Web-UI 
- simplified NTP-server
- command interface 
   
## Usage:  
The serial pins are GPX_RX and GPS_TX, no further installation steps needed. To get more debug information compile it with option "DEBUG_TASMOTA_SENSOR". 

  
## Commands:  
  
+ sensor58 0  
  write to all available sectors, then restart and overwrite the older ones
  
+ sensor58 1  
  write to all available sectors, then restart and overwrite the older ones
  
+ sensor58 2  
  filter out horizontal drift noise
  
+ sensor58 3  
  turn off noise filter
  
+ sensor58 4  
  start recording, new data will be appended
  
+ sensor58 5  
  start new recording, old data will lost
  
+ sensor58 6  
  stop recording, download link will be visible in Web-UI
  
+ sensor58 7  
  send mqtt on new postion + TELE -> consider to set TELE to a very high value
  
+ sensor58 8  
  only TELE message
  
+ sensor58 9  
  start NTP-server
  
+ sensor58 10  
  deactivate NTP-server
  
+ sensor58 11  
  force update of Tasmota-system-UTC with every new GPS-time-message
  
+ sensor58 12  
  do not update of Tasmota-system-UTC with every new GPS-time-message
  
+ sensor58 13  
  set latitude and longitude in settings  
  
  
  
## Rules examples for SSD1306 32x128  
  
  
rule1 on tele-GPS#lat do DisplayText [s1p21c1l01f1]LAT: %value% endon on tele-GPS#lon do DisplayText [s1p21c1l2]LON: %value% endon on switch1#state==3 do sensor58 4 endon on switch1#state==2 do sensor58 6 endon

rule2  on tele-GPS#int>9 do DisplayText [f0c9l4]I%value%  endon  on tele-GPS#int<10 do DisplayText [f0c9l4]I0%value%  endon on tele-GPS#fil==1 do DisplayText [f0c18l4]F endon on tele-GPS#fil==0 do DisplayText [f0c18l4]N endon

rule3 on tele-FLOG#sec do DisplayText  [f0c1l4]SAV:%value%  endon on tele-FLOG#rec==1 do DisplayText [f0c1l4]REC: endon on tele-FLOG#mode do DisplayText [f0c14l4]M%value% endon

*/

#ifdef USE_GPS

#include "NTPServer.h"
#include "NTPPacket.h"


/*********************************************************************************************\
 * constants
\*********************************************************************************************/

#define D_CMND_UBX "UBX"

const char S_JSON_UBX_COMMAND_NVALUE[] PROGMEM = "{\"" D_CMND_UBX "%s\":%d}";

const char kUBXTypes[] PROGMEM = "UBX";

#define UBX_LAT_LON_THRESHOLD 1000 // filter out some noise of local drift


/********************************************************************************************\
| *globals
\*********************************************************************************************/

const char UBLOX_INIT[] PROGMEM = {
  // Disable NMEA
  0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x24, // GxGGA off
  0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x2B, // GxGLL off
  0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x02,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x32, // GxGSA off
  0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x39, // GxGSV off
  0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x04,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x40, // GxRMC off
  0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x05,0x00,0x00,0x00,0x00,0x00,0x01,0x05,0x47, // GxVTG off

  // Disable UBX
  0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x17,0xDC, //NAV-PVT off
  0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x12,0xB9, //NAV-POSLLH off
  0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x13,0xC0, //NAV-STATUS off
  0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x21,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x92, //NAV-TIMEUTC off

  // Enable UBX
  // 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x07,0x00,0x01,0x00,0x00,0x00,0x00,0x18,0xE1, //NAV-PVT on
  0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x02,0x00,0x01,0x00,0x00,0x00,0x00,0x13,0xBE, //NAV-POSLLH on
  0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x03,0x00,0x01,0x00,0x00,0x00,0x00,0x14,0xC5, //NAV-STATUS on
  0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x21,0x00,0x01,0x00,0x00,0x00,0x00,0x32,0x97, //NAV-TIMEUTC on

  // Rate - we will not reset it for the moment after restart
  //  0xB5,0x62,0x06,0x08,0x06,0x00,0x64,0x00,0x01,0x00,0x01,0x00,0x7A,0x12, //(10Hz)
  //  0xB5,0x62,0x06,0x08,0x06,0x00,0xC8,0x00,0x01,0x00,0x01,0x00,0xDE,0x6A, //(5Hz)
  //  0xB5,0x62,0x06,0x08,0x06,0x00,0xE8,0x03,0x01,0x00,0x01,0x00,0x01,0x39 //(1Hz)
  //  0xB5,0x62,0x06,0x08,0x06,0x00,0xD0,0x07,0x01,0x00,0x01,0x00,0xED,0xBD //(0.5Hz)
};

char       UBX_name[4];

struct UBX_t{
  const char UBX_HEADER[2]        = { 0xB5, 0x62 }; // TODO: Check if we really save space here inside the struct
  const char NAV_POSLLH_HEADER[2] = { 0x01, 0x02 };
  const char NAV_STATUS_HEADER[2] = { 0x01, 0x03 };
  const char NAV_TIME_HEADER[2]   = { 0x01, 0x21 };

  struct entry_t{
          int32_t lat;    //raw sensor value
          int32_t lon;    //raw sensor value
          uint32_t time;  //local time from system (maybe provided by the sensor)
    };

  union {
    entry_t values;
    uint8_t bytes[sizeof(entry_t)];
    } rec_buffer;

  struct POLL_MSG {
    uint8_t cls;
    uint8_t id;
    uint16_t zero;
  };

  struct NAV_POSLLH {
    uint8_t cls;
    uint8_t id;
    uint16_t len;
    uint32_t iTOW;
    int32_t lon;
    int32_t lat;
    int32_t height;
    int32_t hMSL;
    uint32_t hAcc;
    uint32_t vAcc;
    };

  struct NAV_STATUS {
    uint8_t cls;
    uint8_t id;
    uint16_t len;
    uint32_t iTOW;
    uint8_t gpsFix;
    uint8_t flags; //bit 0 - gpsfix valid
    uint8_t fixStat;
    uint8_t flags2;
    uint32_t ttff;
    uint32_t msss;
    };
  
  struct NAV_TIME_UTC {
    uint8_t cls;
    uint8_t id;
    uint16_t len;
    uint32_t iTOW;
    uint32_t tAcc;
    int32_t nano;       // Nanoseconds of second, range -1e9 .. 1e9 (UTC)
    uint16_t year;
    uint8_t month;
    uint8_t day;
    uint8_t hour;
    uint8_t min;
    uint8_t sec;
    struct {
      uint8_t UTC:1;
      uint8_t WKN:1;    // week number
      uint8_t TOW:1;    // time of week
      uint8_t padding:5;
      } valid;
    };

  struct CFG_RATE {
    uint8_t cls; //0x06
    uint8_t id; //0x08
    uint16_t len; // 6 bytes
    uint16_t measRate; // in every ms -> 1 Hz = 1000 ms; 10 Hz = 100 ms -> x = 1000 ms / Hz
    uint16_t navRate; //  x measurements for 1 navigation event
    uint16_t timeRef; //  align to time system: 0= UTC, 1 = GPS, 2 = GLONASS, ...
    char CK[2]; // checksum
    };

  struct {
    uint32_t last_iTOW;
    int32_t last_lat;
    int32_t last_lon;
    int32_t last_height;
    uint32_t last_hAcc;
    uint32_t last_vAcc;
    uint8_t gpsFix;
    uint8_t non_empty_loops;   // in case of an unintended reset of the GPS, the serial interface will get flooded with NMEA
    uint16_t log_interval;  // in tenth of seconds
  } state;

  struct {
    uint32_t filter_noise:1;
    uint32_t send_when_new:1; // no teleinterval
    uint32_t send_UI_only:1;
    uint32_t runningNTP:1;
    uint32_t forceUTCupdate:1;
    // TODO: more to come
  } mode;

  union {
    NAV_POSLLH navPosllh;
    NAV_STATUS navStatus;
    NAV_TIME_UTC navTime;
    POLL_MSG pollMsg;
    CFG_RATE cfgRate;
    } Message;

} UBX;

enum UBXMsgType {
  MT_NONE,
  MT_NAV_POSLLH,
  MT_NAV_STATUS,
  MT_NAV_TIME,
  MT_POLL
};

#ifdef USE_FLOG
FLOG *Flog = nullptr;
#endif //USE_FLOG
TasmotaSerial *UBXSerial;

NtpServer timeServer(PortUdp);

/*********************************************************************************************\
 * helper function
\*********************************************************************************************/
void UBXcalcChecksum(char* CK, size_t msgSize) {
  memset(CK, 0, 2);
  for (int i = 0; i < msgSize; i++) {
    CK[0] += ((char*)(&UBX.Message))[i];
    CK[1] += CK[0];
  }
}

boolean UBXcompareMsgHeader(const char* msgHeader) {
  char* ptr = (char*)(&UBX.Message);
  return ptr[0] == msgHeader[0] && ptr[1] == msgHeader[1];
}

void UBXinitCFG(void){
  for(uint32_t i = 0; i < sizeof(UBLOX_INIT); i++) {                        
    UBXSerial->write( pgm_read_byte(UBLOX_INIT+i) );
  }
  DEBUG_SENSOR_LOG(PSTR("UBX: turn off NMEA"));
}

void UBXTriggerTele(void){
  mqtt_data[0] = '\0';
  if (MqttShowSensor()) {
    MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain);
#ifdef USE_RULES
    RulesTeleperiod();  // Allow rule based HA messages
#endif  // USE_RULES
  }
}

/********************************************************************************************/


void UBXDetect(void)
{
  if ((pin[GPIO_GPS_RX] < 99) && (pin[GPIO_GPS_TX] < 99)) {
    UBXSerial = new TasmotaSerial(pin[GPIO_GPS_RX], pin[GPIO_GPS_TX], 1, 0, 96); // 64 byte buffer is NOT enough
    if (UBXSerial->begin(9600)) {
      DEBUG_SENSOR_LOG(PSTR("UBX: started serial"));
       if (UBXSerial->hardwareSerial()) { 
        ClaimSerial(); 
        DEBUG_SENSOR_LOG(PSTR("UBX: claim HW"));
        }
    }
  }

  UBXinitCFG();                 // turn of NMEA, only use "our" UBX-messages
#ifdef USE_FLOG
  if(!Flog){
    Flog = new FLOG;            // init Flash Log
    Flog->init();
  }
#endif // USE_FLOG

  UBX.state.log_interval = 10;  // 1 second
  UBX.mode.send_UI_only = true; // send UI data ...
  UBXTriggerTele();             // ... once at after start
}

uint32_t UBXprocessGPS() {
  static uint32_t fpos = 0;
  static char checksum[2];
  static uint8_t currentMsgType = MT_NONE;
  static size_t payloadSize = sizeof(UBX.Message);

  // DEBUG_SENSOR_LOG(PSTR("UBX: check for serial data"));
  uint32_t data_bytes = 0;
  while ( UBXSerial->available() ) {
    data_bytes++;
    byte c = UBXSerial->read();    
    if ( fpos < 2 ) {
      // For the first two bytes we are simply looking for a match with the UBX header bytes (0xB5,0x62)
      if ( c == UBX.UBX_HEADER[fpos] )
        fpos++;
      else
        fpos = 0; // Reset to beginning state.
    }
    else {
      // If we come here then fpos >= 2, which means we have found a match with the UBX_HEADER
      // and we are now reading in the bytes that make up the payload.
      
      // Place the incoming byte into the ubxMessage struct. The position is fpos-2 because
      // the struct does not include the initial two-byte header (UBX_HEADER).
      if ( (fpos-2) < payloadSize )
        ((char*)(&UBX.Message))[fpos-2] = c;

      fpos++;
      
      if ( fpos == 4 ) {
        // We have just received the second byte of the message type header, 
        // so now we can check to see what kind of message it is.
        if ( UBXcompareMsgHeader(UBX.NAV_POSLLH_HEADER) ) {
          currentMsgType = MT_NAV_POSLLH;
          payloadSize = sizeof(UBX_t::NAV_POSLLH);
          DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_POSLLH"));
        }
        else if ( UBXcompareMsgHeader(UBX.NAV_STATUS_HEADER) ) {
          currentMsgType = MT_NAV_STATUS;
          payloadSize = sizeof(UBX_t::NAV_STATUS);
          DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_STATUS"));
        }
        else if ( UBXcompareMsgHeader(UBX.NAV_TIME_HEADER) ) {
          currentMsgType = MT_NAV_TIME;
          payloadSize = sizeof(UBX_t::NAV_TIME_UTC);
          DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_TIME_UTC"));
        }
        else {
          // unknown message type, bail
          fpos = 0;
          continue;
        }
      }

      if ( fpos == (payloadSize+2) ) {
        // All payload bytes have now been received, so we can calculate the 
        // expected checksum value to compare with the next two incoming bytes.
        UBXcalcChecksum(checksum, payloadSize);
      }
      else if ( fpos == (payloadSize+3) ) {
        // First byte after the payload, ie. first byte of the checksum.
        // Does it match the first byte of the checksum we calculated?
        if ( c != checksum[0] ) {
          // Checksum doesn't match, reset to beginning state and try again.
          fpos = 0; 
        }
      }
      else if ( fpos == (payloadSize+4) ) {
        // Second byte after the payload, ie. second byte of the checksum.
        // Does it match the second byte of the checksum we calculated?
        fpos = 0; // We will reset the state regardless of whether the checksum matches.
        if ( c == checksum[1] ) {
          // Checksum matches, we have a valid message.
          return currentMsgType;
        }
      }
      else if ( fpos > (payloadSize+4) ) {
        // We have now read more bytes than both the expected payload and checksum 
        // together, so something went wrong. Reset to beginning state and try again.
        fpos = 0;
      }
    }
  }
  // DEBUG_SENSOR_LOG(PSTR("UBX: got none or unknown Message"));
  if(data_bytes!=0) {
      UBX.state.non_empty_loops++;
      DEBUG_SENSOR_LOG(PSTR("UBX: got %u bytes, non-empty-loop: %u"), data_bytes, UBX.state.non_empty_loops); 
  } else {
      UBX.state.non_empty_loops = 0; // now a hidden GPS-device reset is unlikely
  }
  return MT_NONE;
}

/********************************************************************************************\
| * callback functions for the download
\*********************************************************************************************/
#ifdef USE_FLOG
void UBXsendHeader(void) {
  WebServer->setContentLength(CONTENT_LENGTH_UNKNOWN);
  WebServer->sendHeader(F("Content-Disposition"), F("attachment; filename=TASMOTA.gpx"));
  WSSend(200, CT_STREAM, F(
     "<?xml version=\"1.0\" encoding=\"UTF-8\" standalone=\"no\" ?>\r\n"
    "<GPX version=\"1.1\" creator=\"TASMOTA\" xmlns=\"http://www.topografix.com/GPX/1/1\" \r\n"
    "xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\"\r\n"
    "xsi:schemaLocation=\"http://www.topografix.com/GPX/1/1 http://www.topografix.com/GPX/1/1/gpx.xsd\">\r\n"
    "<trk>\r\n<trkseg>\r\n"));
}

void UBXsendRecord(uint8_t *buf){
	char record[100];
	char stime[32];
	UBX_t::entry_t *entry = (UBX_t::entry_t*)buf;
	snprintf_P(stime, sizeof(stime), GetDT(entry->time).c_str());
	char lat[12];
	char lon[12];
	dtostrfd((double)entry->lat/10000000.0f,7,lat);
	dtostrfd((double)entry->lon/10000000.0f,7,lon);
	snprintf_P(record, sizeof(record),PSTR("<trkpt\n\t lat=\"%s\" lon=\"%s\">\n\t<time>%s</time>\n</trkpt>\n"),lat ,lon, stime);
	// DEBUG_SENSOR_LOG(PSTR("FLOG: DL %u %u"), Flog->sector.dword_buffer[k+j],Flog->sector.dword_buffer[k+j+1]);
	WebServer->sendContent_P(record);
}

void UBXsendFooter(void){
  WebServer->sendContent(F("</trkseg>\n</trk>\n</gpx>"));
  WebServer->sendContent("");
  Rtc.user_time_entry = false; // we have blocked the main loop and want a new valid time
}

/********************************************************************************************/
void UBXsendFile(void){
  if (!HttpCheckPriviledgedAccess()) { return; }
  Flog->startDownload(sizeof(UBX.rec_buffer),UBXsendHeader,UBXsendRecord,UBXsendFooter);
}
#endif //USE_FLOG
/********************************************************************************************/

void UBXSetRate(uint16_t interval){
  UBX.Message.cfgRate.cls = 0x06;
  UBX.Message.cfgRate.id = 0x08;
  UBX.Message.cfgRate.len = 6;
  uint32_t measRate = (1000*(uint32_t)interval); //seconds to milliseconds
  if (measRate > 0xffff) {
      measRate = 0xffff; // max. 65535 ms interval
  }
  UBX.Message.cfgRate.measRate = (uint16_t)measRate;
  UBX.Message.cfgRate.navRate = 1;
  UBX.Message.cfgRate.timeRef = 1;
  UBXcalcChecksum(UBX.Message.cfgRate.CK, sizeof(UBX.Message.cfgRate)-sizeof(UBX.Message.cfgRate.CK));
  DEBUG_SENSOR_LOG(PSTR("UBX: requested interval: %u seconds measRate: %u ms"), interval, UBX.Message.cfgRate.measRate);
  UBXSerial->write(UBX.UBX_HEADER[0]);
  UBXSerial->write(UBX.UBX_HEADER[1]);
  for(uint32_t i =0; i<sizeof(UBX.Message.cfgRate); i++){
    UBXSerial->write(((uint8_t*)(&UBX.Message.cfgRate))[i]);
    DEBUG_SENSOR_LOG(PSTR("UBX: cfgRate byte %u: %x"), i, ((uint8_t*)(&UBX.Message.cfgRate))[i]);
  }
  UBX.state.log_interval = 10*interval; 
}


void UBXSelectMode(uint16_t mode){
  DEBUG_SENSOR_LOG(PSTR("UBX: set mode to %u"),mode);
  switch(mode){
#ifdef USE_FLOG
    case 0:
      Flog->mode = 0; // write once to all available sectors, then stop
      break;
    case 1:
      Flog->mode = 1; // write to all available sectors, then restart and overwrite the older ones
      break;
    case 2:
      UBX.mode.filter_noise = true;  // filter out horizontal drift noise, TODO: find useful values
      break;
    case 3:
      UBX.mode.filter_noise = false; 
      break;
    case 4:
      Flog->startRecording(true);
      AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: start recording - appending"));
      break;
    case 5:
      Flog->startRecording(false);
      AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: start recording - new log"));
      break;
    case 6:
      if(Flog->recording == true){
        Flog->stopRecording();
      }
      AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: stop recording"));
      break;
#endif //USE_FLOG		  
    case 7:
      UBX.mode.send_when_new = 1; // send mqtt on new postion + TELE -> consider to set TELE to a very high value
      break;
    case 8:
      UBX.mode.send_when_new = 0; // only TELE
      break;
    case 9:
      if (timeServer.beginListening()){
        UBX.mode.runningNTP = true;
      }
      break;
    case 10:
      UBX.mode.runningNTP = false;
      break;
    case 11:
      UBX.mode.forceUTCupdate = true;
      break;
    case 12:
      UBX.mode.forceUTCupdate = false;
      break;
    case 13:
      Settings.latitude = UBX.state.last_lat;
      Settings.longitude = UBX.state.last_lon;
      break;
    default:
      if(mode>1000 && mode <1066) {
        // UBXSetRate(mode-1000); // min. 1001 = 0.001 Hz, but will be converted to 1/65535 anyway ~0.015 Hz, max. 2000 = 1.000 Hz
        UBXSetRate(mode-1000); // set interval between measurements in seconds from 1 to 65 
      }
      break;
  }
  UBX.mode.send_UI_only = true;
  UBXTriggerTele();
}
/********************************************************************************************/

bool UBXHandlePOSLLH(){
    DEBUG_SENSOR_LOG(PSTR("UBX: iTOW: %u"),UBX.Message.navPosllh.iTOW);
    if(UBX.state.gpsFix>1){
        if(UBX.mode.filter_noise){
            if((UBX.Message.navPosllh.lat-UBX.rec_buffer.values.lat<abs(UBX_LAT_LON_THRESHOLD))||(UBX.Message.navPosllh.lon-UBX.rec_buffer.values.lon<abs(UBX_LAT_LON_THRESHOLD))){
                DEBUG_SENSOR_LOG(PSTR("UBX: Diff lat: %u lon: %u "),UBX.Message.navPosllh.lat-UBX.rec_buffer.values.lat, UBX.Message.navPosllh.lon-UBX.rec_buffer.values.lon);
                return false; //no new position
            }
        }
        UBX.rec_buffer.values.lat = UBX.Message.navPosllh.lat;
        UBX.rec_buffer.values.lon = UBX.Message.navPosllh.lon;
        DEBUG_SENSOR_LOG(PSTR("UBX: lat/lon: %i / %i"),UBX.rec_buffer.values.lat, UBX.rec_buffer.values.lon);
        DEBUG_SENSOR_LOG(PSTR("UBX: hAcc: %d"),UBX.Message.navPosllh.hAcc);
        UBX.state.last_iTOW = UBX.Message.navPosllh.iTOW; 
        UBX.state.last_height = UBX.Message.navPosllh.height;
        UBX.state.last_vAcc = UBX.Message.navPosllh.vAcc;
        UBX.state.last_hAcc = UBX.Message.navPosllh.hAcc;
        if(UBX.mode.send_when_new){
            UBXTriggerTele();
        }
        return true; // new position
    } else {
        DEBUG_SENSOR_LOG(PSTR("UBX: no valid position data"));
    }
    return false; // no GPS-fix
}

void UBXHandleSTATUS(){
    DEBUG_SENSOR_LOG(PSTR("UBX: gpsFix: %u, valid: %u"),UBX.Message.navStatus.gpsFix, (UBX.Message.navStatus.flags)&1);
    if((UBX.Message.navStatus.flags)&1){
      UBX.state.gpsFix = UBX.Message.navStatus.gpsFix; //only store fixed status if flag is valid
    }
    else{
      UBX.state.gpsFix = 0; // without valid flag, everything is "no fix"
    }
}

void UBXHandleTIME(){
    DEBUG_SENSOR_LOG(PSTR("UBX: UTC-Time: %u-%u-%u %u:%u:%u"),UBX.Message.navTime.year, UBX.Message.navTime.month ,UBX.Message.navTime.day,UBX.Message.navTime.hour,UBX.Message.navTime.min,UBX.Message.navTime.sec);
    if(UBX.Message.navTime.valid.UTC){
      DEBUG_SENSOR_LOG(PSTR("UBX: UTC-Time is valid"));
      if(Rtc.user_time_entry == false || UBX.mode.forceUTCupdate){ 
        AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: UTC-Time is valid, set system time"));
        TIME_T gpsTime;
        gpsTime.year = UBX.Message.navTime.year - 1970;
        gpsTime.month = UBX.Message.navTime.month;
        gpsTime.day_of_month = UBX.Message.navTime.day;
        gpsTime.hour = UBX.Message.navTime.hour;
        gpsTime.minute = UBX.Message.navTime.min;
        gpsTime.second = UBX.Message.navTime.sec;
        Rtc.utc_time = MakeTime(gpsTime);
        Rtc.user_time_entry = true;
      } 
    }
}

void UBXHandleOther(void)
{
  if(UBX.state.non_empty_loops>6){ // we expect only 4-5 non-empty loops in a row, could change with other sensor speed (Hz)
    UBXinitCFG();                  // this should only happen with lots of NMEA-messages, but it is only a guess!!
    AddLog_P(LOG_LEVEL_ERROR, PSTR("UBX: possible device-reset, will re-init"));
    UBXSerial->flush();
    UBX.state.non_empty_loops = 0;
  }
}

/********************************************************************************************/

void UBXTimeServer()
{
  if(UBX.mode.runningNTP){
    timeServer.processOneRequest(Rtc.utc_time, UBX.state.last_iTOW%1000);
  }
}

void UBXLoop(void)
{
  static uint16_t counter; //count up every 100 msec
  static bool new_position;
  
  uint32_t msgType = UBXprocessGPS();

  switch(msgType){
    case MT_NAV_POSLLH:
      new_position = UBXHandlePOSLLH();
      break;
    case MT_NAV_STATUS:
      UBXHandleSTATUS();
      break;
    case MT_NAV_TIME:
      UBXHandleTIME();
      break;
    default:
      UBXHandleOther();
      break;
  }

#ifdef USE_FLOG
  if(counter>UBX.state.log_interval){
    if(Flog->recording && new_position){
      UBX.rec_buffer.values.time = Rtc.local_time;
      Flog->addToBuffer(UBX.rec_buffer.bytes, sizeof(UBX.rec_buffer.bytes));
      counter = 0;
    }
  }
#endif // USE_FLOG

counter++;
}

/********************************************************************************************/
// normaly in i18n.h

#ifdef USE_WEBSERVER
  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>

#ifdef USE_FLOG
#ifdef DEBUG_TASMOTA_SENSOR
  const char HTTP_SNS_FLOGVER[] PROGMEM =  "{s}<hr>{m}<hr>{e}{s} FLOG with %u sectors: {m}%u bytes{e}"
                                          "{s} FLOG next sector for REC: {m} %u {e}"
                                          "{s} %u sector(s) with data at sector: {m} %u {e}";
  const char HTTP_SNS_FLOGREC[] PROGMEM = "{s} RECORDING (bytes in buffer) {m}%u{e}";
#endif  // DEBUG_TASMOTA_SENSOR

  const char HTTP_SNS_FLOG[] PROGMEM = "{s}<hr>{m}<hr>{e}{s} Flash-Log {m} %s{e}";
  const char kFLOG_STATE0[] PROGMEM = "ready";
  const char kFLOG_STATE1[] PROGMEM = "recording";
  const char * kFLOG_STATE[] ={kFLOG_STATE0, kFLOG_STATE1};

  const char HTTP_BTN_FLOG_DL[] PROGMEM = "<button><a href='/UBX'>Download GPX-File</a></button>";

#endif //USE_FLOG
  const char HTTP_SNS_NTPSERVER[] PROGMEM = "{s} NTP server {m}active{e}";

  const char HTTP_SNS_GPS[] PROGMEM = "{s} GPS latitude {m}%s{e}"
                                      "{s} GPS longitude {m}%s{e}"
                                      "{s} GPS height {m}%s   m{e}"
                                      "{s} GPS hor. Accuracy {m}%s   m{e}"
                                      "{s} GPS vert. Accuracy {m}%s   m{e}"
                                      "{s} GPS sat-fix status {m}%s{e}";

  const char kGPSFix0[] PROGMEM = "no fix";
  const char kGPSFix1[] PROGMEM = "dead reckoning only";
  const char kGPSFix2[] PROGMEM = "2D-fix";
  const char kGPSFix3[] PROGMEM = "3D-fix";
  const char kGPSFix4[] PROGMEM = "GPS + dead reckoning combined";
  const char kGPSFix5[] PROGMEM = "Time only fix";
  const char * kGPSFix[] PROGMEM ={kGPSFix0, kGPSFix1, kGPSFix2, kGPSFix3, kGPSFix4, kGPSFix5};

//  const char UBX_GOOGLE_MAPS[] ="<iframe width='100%%' src='https://maps.google.com/maps?width=&amp;height=&amp;hl=en&amp;q=%s %s+(Tasmota)&amp;ie=UTF8&amp;t=&amp;z=10&amp;iwloc=B&amp;output=embed' frameborder='0' scrolling='no' marginheight='0' marginwidth='0'></iframe>";
                                

#endif  // USE_WEBSERVER

/********************************************************************************************/

void UBXShow(bool json)
{
    char lat[12];
    char lon[12];
    char height[12];
    char hAcc[12];
    char vAcc[12];
    dtostrfd((double)UBX.rec_buffer.values.lat/10000000.0f,7,lat);
    dtostrfd((double)UBX.rec_buffer.values.lon/10000000.0f,7,lon);
    dtostrfd((double)UBX.state.last_height/1000.0f,3,height);
    dtostrfd((double)UBX.state.last_vAcc/1000.0f,3,hAcc);
    dtostrfd((double)UBX.state.last_hAcc/1000.0f,3,vAcc);

  if (json) 
  {
    ResponseAppend_P(PSTR(",\"GPS\":{"));
    if(UBX.mode.send_UI_only){
      uint32_t i = UBX.state.log_interval / 10;
      ResponseAppend_P(PSTR("\"fil\":%u,\"int\":%u}"),UBX.mode.filter_noise, i);
    } else {
      ResponseAppend_P(PSTR("\"lat\":%s,\"lon\":%s,\"height\":%s,\"hAcc\":%s,\"vAcc\":%s}"), lat, lon, height, hAcc, vAcc);
    }
#ifdef USE_FLOG
    ResponseAppend_P(PSTR(",\"FLOG\":{\"rec\":%u,\"mode\":%u,\"sec\":%u}"), Flog->recording, Flog->mode, Flog->sectors_left);
#endif //USE_FLOG
    UBX.mode.send_UI_only = false;
#ifdef USE_WEBSERVER
  } else {
      WSContentSend_PD(HTTP_SNS_GPS, lat, lon, height, hAcc, vAcc, kGPSFix[UBX.state.gpsFix]);
      //WSContentSend_P(UBX_GOOGLE_MAPS, lat, lon);
#ifdef DEBUG_TASMOTA_SENSOR
#ifdef USE_FLOG
    WSContentSend_PD(HTTP_SNS_FLOGVER, Flog->num_sectors, Flog->size, Flog->current_sector, Flog->sectors_left, Flog->sector.header.physical_start_sector);
    if(Flog->recording){
      WSContentSend_PD(HTTP_SNS_FLOGREC, Flog->sector.header.buf_pointer - 8);
    }
#endif //USE_FLOG
#endif // DEBUG_TASMOTA_SENSOR
#ifdef USE_FLOG
    if(Flog->ready){
      WSContentSend_P(HTTP_SNS_FLOG,kFLOG_STATE[Flog->recording]);
    }
    if(!Flog->recording && Flog->found_saved_data){
      WSContentSend_P(HTTP_BTN_FLOG_DL);
    }
#endif //USE_FLOG
    if(UBX.mode.runningNTP){
      WSContentSend_P(HTTP_SNS_NTPSERVER);
    }
#endif  // USE_WEBSERVER
  }
}


/*********************************************************************************************\
 * check the UBX commands
\*********************************************************************************************/

bool UBXCmd(void) {
  bool serviced = true;
    if (XdrvMailbox.data_len > 0) {
      UBXSelectMode(XdrvMailbox.payload); 
      Response_P(S_JSON_UBX_COMMAND_NVALUE, XdrvMailbox.command, XdrvMailbox.payload);
    }
  return serviced;
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

#define XSNS_58        58

bool Xsns58(uint8_t function)
{
  bool result = false;

  if (true) {  
    switch (function) {
      case FUNC_INIT:
        UBXDetect();
        break;
      case FUNC_COMMAND_SENSOR:
	if (XSNS_58 == XdrvMailbox.index){
          result = UBXCmd();
        }  
        break;
      case FUNC_EVERY_50_MSECOND:
        UBXTimeServer();
        break;
      case FUNC_EVERY_100_MSECOND:
#ifdef USE_FLOG
        if(!Flog->running_download)
#endif //USE_FLOG
        {
          UBXLoop();
        }
        break;
#ifdef USE_FLOG
      case FUNC_WEB_ADD_HANDLER:
        WebServer->on("/UBX", UBXsendFile);
        break;
#endif //USE_FLOG
      case FUNC_JSON_APPEND:
        UBXShow(1);
        break;
#ifdef USE_WEBSERVER
      case FUNC_WEB_SENSOR:
#ifdef USE_FLOG
        if(!Flog->running_download)
#endif //USE_FLOG
        {
          UBXShow(0);
        }
        break;
#endif  // USE_WEBSERVER
    }
  }
  return result;
}

#endif  // USE_GPS_UBX