Tasmota/tasmota/tasmota_xdsp_display/xdsp_17_universal.ino

/*
  xdsp_17_universal.ino -  universal display driver support for Tasmota

  Copyright (C) 2021  Gerhard Mutz and  Theo Arends

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/


#if defined(USE_DISPLAY)
#ifdef USE_UNIVERSAL_DISPLAY

#define XDSP_17                17

#include <uDisplay.h>

bool udisp_init_done = false;
uint8_t ctouch_counter;


#ifdef USE_UFILESYS
extern FS *ffsp;
#endif

#undef GT911_address
#define GT911_address 0x5D

enum {GPIO_DP_RES=GPIO_SENSOR_END-1,GPIO_DP_CS,GPIO_DP_RS,GPIO_DP_WR,GPIO_DP_RD,GPIO_DPAR0,GPIO_DPAR1,GPIO_DPAR2,GPIO_DPAR3,GPIO_DPAR4,GPIO_DPAR5,GPIO_DPAR6,GPIO_DPAR7,GPIO_DPAR8,GPIO_DPAR9,GPIO_DPAR10,GPIO_DPAR11,GPIO_DPAR12,GPIO_DPAR13,GPIO_DPAR14,GPIO_DPAR15};


#ifndef USE_DISPLAY
uint8_t color_type;
uint16_t fg_color;
uint16_t bg_color;
Renderer *renderer;
#else
extern uint8_t color_type;
extern uint16_t fg_color;
extern uint16_t bg_color;
#endif

#ifndef DISPDESC_SIZE
#define DISPDESC_SIZE 1000
#endif

void Core2DisplayPower(uint8_t on);
void Core2DisplayDim(uint8_t dim);

//#define DSP_ROM_DESC

#ifndef DISP_DESC_FILE
//#define DISP_DESC_FILE "/dispdesc.txt"
#define DISP_DESC_FILE "/display.ini"
#endif // DISP_DESC_FILE

/*********************************************************************************************/
#ifdef DSP_ROM_DESC
const char DSP_SAMPLE_DESC[] PROGMEM = DSP_ROM_DESC;
#endif // DSP_ROM_DESC
/*********************************************************************************************/
Renderer *Init_uDisplay(const char *desc) {
char *ddesc = 0;
char *fbuff;
uDisplay *udisp;
int8_t cs;

  if (TasmotaGlobal.gpio_optiona.udisplay_driver || desc) {

    Settings->display_model = XDSP_17;


    fbuff = (char*)calloc(DISPDESC_SIZE, 1);
    if (!fbuff) return 0;

    if (desc) {
      memcpy_P(fbuff, desc, DISPDESC_SIZE - 1);
      ddesc = fbuff;
      AddLog(LOG_LEVEL_DEBUG, PSTR("DSP: const char descriptor used"));
    }


#ifdef USE_UFILESYS
    if (ffsp  && !TasmotaGlobal.no_autoexec && !ddesc) {
      File fp;
      fp = ffsp->open(DISP_DESC_FILE, "r");
      if (fp > 0) {
        uint32_t size = fp.size();
        if (size > DISPDESC_SIZE - 50) {
          free(fbuff);
          fbuff = (char*)calloc(size + 50, 1);
          if (!fbuff) return 0;
        }
        fp.read((uint8_t*)fbuff, size);
        fp.close();
        ddesc = fbuff;
        AddLog(LOG_LEVEL_DEBUG, PSTR("DSP: File descriptor used"));
      }
    }
#endif // USE_UFILESYS


#ifdef USE_SCRIPT
    if (bitRead(Settings->rule_enabled, 0) && !ddesc) {
      uint8_t dfound = Run_Scripter(">d",-2,0);
      if (dfound == 99) {
        char *lp = glob_script_mem.section_ptr + 2;
        while (*lp != '\n') lp++;
        memcpy(fbuff, lp + 1, DISPDESC_SIZE - 1);
        ddesc = fbuff;
        AddLog(LOG_LEVEL_DEBUG, PSTR("DSP: Script descriptor used"));
      }
    }
#endif // USE_SCRIPT

#ifdef USE_RULES
    if (!bitRead(Settings->rule_enabled, 2) && !ddesc) {
      // only if rule3 is not enabled for rules
      char *cp = Settings->rules[2];
      while (*cp == ' ') cp++;
      memcpy(fbuff, cp, DISPDESC_SIZE - 1);
      if (fbuff[0] == ':' && fbuff[1] == 'H') {
        // assume display descriptor, replace space with line feed
        for (uint32_t cnt = 0; cnt < DISPDESC_SIZE; cnt++) {
          if (fbuff[cnt] == ' ') fbuff[cnt] = '\n';
        }
        ddesc = fbuff;
        AddLog(LOG_LEVEL_DEBUG, PSTR("DSP: Rule 3 descriptor used"));
      }

    }
#endif // USE_RULES


#ifdef DSP_ROM_DESC
    if (!ddesc) {
      memcpy_P(fbuff, DSP_SAMPLE_DESC, sizeof(DSP_SAMPLE_DESC));
      ddesc = fbuff;
      AddLog(LOG_LEVEL_DEBUG, PSTR("DSP: Flash descriptor used"));
    }
#endif // DSP_ROM_DESC

    if (!ddesc) {
      AddLog(LOG_LEVEL_DEBUG, PSTR("DSP: No valid descriptor found"));
      if (fbuff) free(fbuff);
      return 0;
    }

    // now replace tasmota vars before passing to driver
    char *cp = strstr(ddesc, "I2C");
    if (cp) {
      cp += 3;
      uint8_t wire_n = 1;
      if (*cp == '1' || *cp == '2') {
        wire_n = *cp & 3;
        cp += 2;
      } else {
        cp++;
      }
      //,3c,22,21,-1
      uint8_t i2caddr = strtol(cp, &cp, 16);
      int8_t scl, sda;
      scl = replacepin(&cp, Pin(GPIO_I2C_SCL, wire_n - 1));
      sda = replacepin(&cp, Pin(GPIO_I2C_SDA, wire_n - 1));
      replacepin(&cp, Pin(GPIO_OLED_RESET));

      if (wire_n == 1) {
        if (!TasmotaGlobal.i2c_enabled) {
          I2cBegin(sda, scl);
        }
      }
#ifdef ESP32
      if (wire_n == 2) {
        if (!TasmotaGlobal.i2c_enabled_2) {
          I2c2Begin(sda, scl);
        }
      }
      if (I2cSetDevice(i2caddr, wire_n - 1)) {
        I2cSetActiveFound(i2caddr, "DSP-I2C", wire_n - 1);
      }
#endif // ESP32

#ifdef ESP8266
      if (I2cSetDevice(i2caddr)) {
        I2cSetActiveFound(i2caddr, "DSP-I2C");
      }
#endif // ESP8266
      //AddLog(LOG_LEVEL_INFO, PSTR("DSP: i2c %x, %d, %d, %d!"), i2caddr, wire_n, scl, sda);
    }

    cp = strstr(ddesc, "SPI,");
    if (cp) {
      cp += 4;
      //; 7 params nr,cs,sclk,mosi,dc,bl,reset,miso
      //SPI,*,*,*,*,*,*,*
      switch (*cp) {
        case '1':
          cs = Pin(GPIO_SPI_CS);
          break;
        case '2':
          cs = Pin(GPIO_SPI_CS, 1);
          break;
        default:
          cs = Pin(GPIO_SSPI_CS);
          break;
      }
      if (*cp == '1') {
        cp+=2;
        replacepin(&cp, cs);
        replacepin(&cp, Pin(GPIO_SPI_CLK));
        replacepin(&cp, Pin(GPIO_SPI_MOSI));
        replacepin(&cp, Pin(GPIO_SPI_DC));
        replacepin(&cp, Pin(GPIO_BACKLIGHT));
        replacepin(&cp, Pin(GPIO_OLED_RESET));
        replacepin(&cp, Pin(GPIO_SPI_MISO));
      } else if (*cp == '2') {
        cp+=2;
        replacepin(&cp, cs);
        replacepin(&cp, Pin(GPIO_SPI_CLK, 1));
        replacepin(&cp, Pin(GPIO_SPI_MOSI, 1));
        replacepin(&cp, Pin(GPIO_SPI_DC, 1));
        replacepin(&cp, Pin(GPIO_BACKLIGHT));
        replacepin(&cp, Pin(GPIO_OLED_RESET));
        replacepin(&cp, Pin(GPIO_SPI_MISO, 1));
      } else {
        // soft spi pins
        cp+=2;
        replacepin(&cp, cs);
        replacepin(&cp, Pin(GPIO_SSPI_SCLK));
        replacepin(&cp, Pin(GPIO_SSPI_MOSI));
        replacepin(&cp, Pin(GPIO_SSPI_DC));
        replacepin(&cp, Pin(GPIO_BACKLIGHT));
        replacepin(&cp, Pin(GPIO_OLED_RESET));
        replacepin(&cp, Pin(GPIO_SSPI_MISO));
      }
    }

    uint16_t xs, ys;
    // we need screen size for gt911 touch controler
    cp = strstr(ddesc, ":H,");
    if (cp) {
      cp += 3;
      cp = strchr(cp, ',');
      cp++;
      xs = strtol(cp, &cp, 10);
      cp++;
      ys = strtol(cp, &cp, 10);
    }

#ifdef CONFIG_IDF_TARGET_ESP32S3
    int8_t xp, xm, yp, ym;

    cp = strstr(ddesc, "PAR,");
    if (cp) {
      cp += 4;
      // 8 or 16 bus
      uint8_t mode = strtol(cp, &cp, 10);
      cp++;

      replacepin(&cp, Pin(GPIO_DP_RES));
      xm = replacepin(&cp, Pin(GPIO_DP_CS));
      yp = replacepin(&cp, Pin(GPIO_DP_RS));
      replacepin(&cp, Pin(GPIO_DP_WR));
      replacepin(&cp, Pin(GPIO_DP_RD));
      replacepin(&cp, Pin(GPIO_BACKLIGHT));

      ym = replacepin(&cp, Pin(GPIO_DPAR0));
      xp = replacepin(&cp, Pin(GPIO_DPAR1));

      replacepin(&cp, Pin(GPIO_DPAR2));
      replacepin(&cp, Pin(GPIO_DPAR3));
      replacepin(&cp, Pin(GPIO_DPAR4));
      replacepin(&cp, Pin(GPIO_DPAR5));
      replacepin(&cp, Pin(GPIO_DPAR6));
      replacepin(&cp, Pin(GPIO_DPAR7));

      if (mode == 16) {
        replacepin(&cp, Pin(GPIO_DPAR8));
        replacepin(&cp, Pin(GPIO_DPAR9));
        replacepin(&cp, Pin(GPIO_DPAR10));
        replacepin(&cp, Pin(GPIO_DPAR11));
        replacepin(&cp, Pin(GPIO_DPAR12));
        replacepin(&cp, Pin(GPIO_DPAR13));
        replacepin(&cp, Pin(GPIO_DPAR14));
        replacepin(&cp, Pin(GPIO_DPAR15));
      }
    }
#endif // CONFIG_IDF_TARGET_ESP32S3
/*
    File fp;
    fp = ffsp->open("/dump.txt", "w");
    fp.write((uint8_t*)ddesc, DISPDESC_SIZE);
    fp.close();
*/

    // init renderer
    if (renderer) {
      delete renderer;
      AddLog(LOG_LEVEL_DEBUG, PSTR("DSP: reinit"));
    }

    udisp  = new uDisplay(ddesc);

    // checck for touch option TI1 or TI2
#if defined(USE_FT5206) || defined(USE_GT911)
    cp = strstr(ddesc, ":TI");
    if (cp) {
      uint8_t wire_n = 1;
      cp += 3;
      wire_n = (*cp & 3) - 1;
      cp += 2;

      uint8_t i2caddr = strtol(cp, &cp, 16);
      int8_t scl, sda, irq = -1, rst = -1;
      scl = replacepin(&cp, Pin(GPIO_I2C_SCL, wire_n));
      sda = replacepin(&cp, Pin(GPIO_I2C_SDA, wire_n));
      if (*(cp - 1) == ',') {
        irq = strtol(cp, &cp, 10);
      } else {
        irq = -1;
      }
      if (*cp == ',') {
        cp++;
        rst = strtol(cp, &cp, 10);
      } else {
        rst = -1;
      }

      if (wire_n == 0) {
        if (!TasmotaGlobal.i2c_enabled) {
          I2cBegin(sda, scl);
        }
      }
#ifdef ESP32
      if (wire_n == 1) {
        if (!TasmotaGlobal.i2c_enabled_2) {
          I2c2Begin(sda, scl, 400000);
        }
      }
      if (I2cSetDevice(i2caddr, wire_n)) {
        if (i2caddr == GT911_address) {
          I2cSetActiveFound(i2caddr, "GT911", wire_n);
        } else {
          I2cSetActiveFound(i2caddr, "FT5206", wire_n);
        }
      }
#endif // ESP32

#ifdef ESP8266
      //AddLog(LOG_LEVEL_INFO, PSTR("DSP: touch %x, %d, %d, %d!"), i2caddr, wire_n, scl, sda);
      if (I2cSetDevice(i2caddr)) {
        if (i2caddr == GT911_address) {
          I2cSetActiveFound(i2caddr, "GT911");
        } else {
          I2cSetActiveFound(i2caddr, "FT5206");
        }
      }
#endif // ESP8266

      // start digitizer
#ifdef ESP32
      if (i2caddr == GT911_address) {
#ifdef USE_GT911
        if (!wire_n) GT911_Touch_Init(&Wire, irq, rst, xs, ys);
        else GT911_Touch_Init(&Wire1, irq, rst, xs, ys);
#endif
      } else {
#ifdef USE_FT5206
        if (!wire_n) FT5206_Touch_Init(Wire);
        else FT5206_Touch_Init(Wire1);
#endif
      }

#else

      if (i2caddr == GT911_address) {
#ifdef USE_GT911
      if (!wire_n) GT911_Touch_Init(&Wire, irq, rst, xs, ys);
#endif
      } else {
#ifdef USE_FT5206
      if (!wire_n) FT5206_Touch_Init(Wire);
#endif
      }
#endif // ESP32

    }
#endif // USE_FT5206 || GT911

#ifdef USE_XPT2046
    cp = strstr(ddesc, ":TS,");
    if (cp) {
      cp += 4;
      uint8_t touch_cs = replacepin(&cp, Pin(GPIO_XPT2046_CS));
      int8_t irqpin = -1;
      if (*(cp - 1) == ',') {
        irqpin = strtol(cp, &cp, 10);
      }
      uint8_t bus = 1;
      if (*cp == ',') {
        cp++;
        bus = strtol(cp, &cp, 10);
        if (bus < 1) bus = 1;
      }
	    XPT2046_Touch_Init(touch_cs, irqpin, bus - 1);
    }
#endif // USE_XPT2046

#ifdef CONFIG_IDF_TARGET_ESP32S3
#ifdef SIMPLE_RES_TOUCH
    cp = strstr(ddesc, ":TR,");
    if (cp) {
      cp += 4;
      Simple_ResTouch_Init(xp, xm, yp, ym);
    }
#endif
#endif

    uint8_t inirot = Settings->display_rotate;

    cp = strstr(ddesc, ":r,");
    if (cp) {
      cp+=3;
      inirot = strtol(cp, &cp, 10);
    }

    // release desc buffer
    if (fbuff) free(fbuff);

    renderer = udisp->Init();
    if (!renderer) return 0;

    fg_color = renderer->fgcol();
    bg_color = renderer->bgcol();
    color_type = renderer->color_type();

#ifdef USE_M5STACK_CORE2
    renderer->SetPwrCB(Core2DisplayPower);
    renderer->SetDimCB(Core2DisplayDim);
#endif // USE_M5STACK_CORE2

    renderer->DisplayInit(DISPLAY_INIT_MODE, Settings->display_size, inirot, Settings->display_font);

    Settings->display_width = renderer->width();
    Settings->display_height = renderer->height();

    bool iniinv = Settings->display_options.invert;
    cp = strstr(ddesc, ":n,");
    if (cp) {
      cp+=3;
      iniinv = strtol(cp, &cp, 10);
      Settings->display_options.invert = iniinv;
    }
    renderer->invertDisplay(iniinv);

    ApplyDisplayDimmer();

#ifdef SHOW_SPLASH
    if (!Settings->flag5.display_no_splash) {
      renderer->Splash();
    }
#endif // SHOW_SPLASH

    udisp_init_done = true;
    AddLog(LOG_LEVEL_INFO, PSTR("DSP: Configured display '%s'"), renderer->devname());

    return renderer;
  }
  return 0;
}

/*********************************************************************************************/

int8_t replacepin(char **cp, uint16_t pin) {
  int8_t res = 0;
  char *lp = *cp;
  if (*lp == ',') lp++;
  if (*lp == '*') {
    char val[8];
    itoa(pin, val, 10);
    uint16_t slen = strlen(val);
    //AddLog(LOG_LEVEL_INFO, PSTR("replace pin: %d"), pin);
    memmove(lp + slen, lp + 1, strlen(lp));
    memmove(lp, val, slen);
  }
  res= strtol(lp, 0, 10);
  char *np = strchr(lp, ',');
  if (np) {
    *cp = np + 1;
  }
  return res;
}

#ifdef USE_DISPLAY_MODES1TO5

void UDISP_PrintLog(void)
{
  disp_refresh--;
  if (!disp_refresh) {
    disp_refresh = Settings->display_refresh;
    if (!disp_screen_buffer_cols) { DisplayAllocScreenBuffer(); }

    char* txt = DisplayLogBuffer('\370');
    if (txt != NULL) {
      uint8_t last_row = Settings->display_rows -1;

      renderer->clearDisplay();
      renderer->setTextSize(Settings->display_size);
      renderer->setCursor(0,0);
      for (byte i = 0; i < last_row; i++) {
        strlcpy(disp_screen_buffer[i], disp_screen_buffer[i +1], disp_screen_buffer_cols);
        renderer->println(disp_screen_buffer[i]);
      }
      strlcpy(disp_screen_buffer[last_row], txt, disp_screen_buffer_cols);
      DisplayFillScreen(last_row);

      AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_DEBUG "[%s]"), disp_screen_buffer[last_row]);

      renderer->println(disp_screen_buffer[last_row]);
      renderer->Updateframe();
    }
  }
}

void UDISP_Time(void)
{
  char line[12];

  renderer->clearDisplay();
  renderer->setTextSize(Settings->display_size);
  renderer->setTextFont(Settings->display_font);
  renderer->setCursor(0, 0);
  snprintf_P(line, sizeof(line), PSTR(" %02d" D_HOUR_MINUTE_SEPARATOR "%02d" D_MINUTE_SECOND_SEPARATOR "%02d"), RtcTime.hour, RtcTime.minute, RtcTime.second);  // [ 12:34:56 ]
  renderer->println(line);
  renderer->println();
  snprintf_P(line, sizeof(line), PSTR("%02d" D_MONTH_DAY_SEPARATOR "%02d" D_YEAR_MONTH_SEPARATOR "%04d"), RtcTime.day_of_month, RtcTime.month, RtcTime.year);   // [01-02-2018]
  renderer->println(line);
  renderer->Updateframe();
}

void UDISP_Refresh(void)  // Every second
{
  if (!renderer) return;
  if (Settings->display_mode) {  // Mode 0 is User text
    switch (Settings->display_mode) {
      case 1:  // Time
        UDISP_Time();
        break;
      case 2:  // Local
      case 3:  // Local
      case 4:  // Mqtt
      case 5:  // Mqtt
        UDISP_PrintLog();
        break;
    }
  }
}

#endif  // USE_DISPLAY_MODES1TO5

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xdsp17(uint32_t function) {
  bool result = false;

  if (FUNC_DISPLAY_INIT_DRIVER == function) {
    Init_uDisplay(nullptr);
  }
  else if (udisp_init_done && (XDSP_17 == Settings->display_model)) {
    switch (function) {
      case FUNC_DISPLAY_MODEL:
        result = true;
        break;

#ifdef USE_DISPLAY_MODES1TO5
      case FUNC_DISPLAY_EVERY_SECOND:
        UDISP_Refresh();
        break;
#endif  // USE_DISPLAY_MODES1TO5

    }
  }
  return result;
}

#endif  // USE_UNIVERSAL_DISPLAY
#endif  // USE_DISPLAY