Tasmota/tasmota/xdrv_24_buzzer.ino

200 lines
5.7 KiB
Arduino
Raw Normal View History

/*
xdrv_24_Buzzer.ino - buzzer support for Tasmota
2019-12-31 13:23:34 +00:00
Copyright (C) 2020 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_BUZZER
/*********************************************************************************************\
* Buzzer support
\*********************************************************************************************/
#define XDRV_24 24
struct BUZZER {
uint32_t tune = 0;
bool active = true;
bool enable = false;
uint8_t inverted = 0; // Buzzer inverted flag (1 = (0 = On, 1 = Off))
uint8_t count = 0; // Number of buzzes
uint8_t set[2];
uint8_t duration;
uint8_t state = 0;
} Buzzer;
/*********************************************************************************************/
void BuzzerOff(void)
{
2019-12-18 17:21:10 +00:00
DigitalWrite(GPIO_BUZZER, Buzzer.inverted); // Buzzer Off
}
//void BuzzerBeep(uint32_t count = 1, uint32_t on = 1, uint32_t off = 1, uint32_t tune = 0);
void BuzzerBeep(uint32_t count, uint32_t on, uint32_t off, uint32_t tune)
{
Buzzer.set[0] = off; // off duration in 100 mSec steps
Buzzer.set[1] = on; // on duration in 100 mSec steps
Buzzer.duration = 1; // Start buzzer on first step
Buzzer.tune = 0;
if (tune) {
uint32_t tune1 = tune;
uint32_t tune2 = tune;
for (uint32_t i = 0; i < 32; i++) {
if (!(tune2 & 0x80000000)) {
tune2 <<= 1; // Skip leading silence
} else {
Buzzer.tune <<= 1; // Add swapped tune
Buzzer.tune |= tune1 & 1;
tune1 >>= 1;
}
}
Buzzer.count = 1; // Allow tune only once
} else {
Buzzer.count = count * 2; // Start buzzer
}
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("BUZ: %d(%d),%d,%d,0x%08X(0x%08X)"), count, Buzzer.count, on, off, tune, Buzzer.tune);
Buzzer.enable = (Buzzer.count > 0);
if (!Buzzer.enable) {
BuzzerOff();
}
}
void BuzzerBeep(uint32_t count) {
BuzzerBeep(count, 1, 1, 0);
}
void BuzzerEnabledBeep(uint32_t count, uint32_t duration)
{
2019-11-03 12:51:22 +00:00
if (Settings.flag3.buzzer_enable) { // SetOption67 - Enable buzzer when available
BuzzerBeep(count, duration, 1, 0);
}
}
/*********************************************************************************************/
2019-08-13 16:33:35 +01:00
bool BuzzerPinState(void)
{
if (XdrvMailbox.index == GPIO_BUZZER_INV) {
Buzzer.inverted = 1;
XdrvMailbox.index -= (GPIO_BUZZER_INV - GPIO_BUZZER);
return true;
}
return false;
}
void BuzzerInit(void)
{
if (pin[GPIO_BUZZER] < 99) {
pinMode(pin[GPIO_BUZZER], OUTPUT);
BuzzerOff();
} else {
Buzzer.active = false;
}
}
void BuzzerEvery100mSec(void)
{
if (Buzzer.enable) {
if (Buzzer.count) {
if (Buzzer.duration) {
Buzzer.duration--;
if (!Buzzer.duration) {
if (Buzzer.tune) {
Buzzer.state = Buzzer.tune & 1;
Buzzer.tune >>= 1;
} else {
Buzzer.count--;
Buzzer.state = Buzzer.count & 1;
}
Buzzer.duration = Buzzer.set[Buzzer.state];
}
}
2019-12-18 17:21:10 +00:00
DigitalWrite(GPIO_BUZZER, (Buzzer.inverted) ? !Buzzer.state : Buzzer.state);
} else {
Buzzer.enable = false;
}
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
const char kBuzzerCommands[] PROGMEM = "|" // No prefix
"Buzzer" ;
void (* const BuzzerCommand[])(void) PROGMEM = {
&CmndBuzzer };
void CmndBuzzer(void)
{
// Buzzer <number of beeps>,<duration of beep in 100mS steps>,<duration of silence in 100mS steps>,<tune>
// All parameters are optional
//
// Buzzer = Buzzer 1,1,1 = Beep once with both duration and pause set to 100mS
// Buzzer 0 = Stop active beep cycle
// Buzzer 2 = Beep twice with duration 200mS and pause 100mS
// Buzzer 2,3 = Beep twice with duration 300mS and pause 100mS
// Buzzer 2,3,4 = Beep twice with duration 300mS and pause 400mS
// Buzzer 2,3,4,0xF54 = Beep a sequence once indicated by 0xF54 = 1111 0101 01 with duration 300mS and pause 400mS
if (XdrvMailbox.data_len > 0) {
if (XdrvMailbox.payload > 0) {
uint32_t parm[4] = { 0 };
ParseParameters(4, parm);
for (uint32_t i = 0; i < 3; i++) {
if (parm[i] < 1) { parm[i] = 1; } // Default Count, On time, Off time
}
BuzzerBeep(parm[0], parm[1], parm[2], parm[3]);
} else {
BuzzerBeep(0);
}
} else {
BuzzerBeep(1);
}
ResponseCmndDone();
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv24(uint8_t function)
{
bool result = false;
if (Buzzer.active) {
switch (function) {
case FUNC_EVERY_100_MSECOND:
BuzzerEvery100mSec();
break;
case FUNC_COMMAND:
result = DecodeCommand(kBuzzerCommands, BuzzerCommand);
break;
case FUNC_PRE_INIT:
BuzzerInit();
break;
case FUNC_PIN_STATE:
result = BuzzerPinState();
break;
}
}
return result;
}
#endif // USE_BUZZER