2021-10-23 14:16:35 +01:00
|
|
|
/*
|
2020-05-12 14:42:16 +01:00
|
|
|
tasmota_configurations_ESP32.h - ESP32 only Configurations for Tasmota
|
|
|
|
|
|
2021-01-01 12:44:04 +00:00
|
|
|
Copyright (C) 2021 Theo Arends
|
2020-05-12 14:42:16 +01:00
|
|
|
|
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef _TASMOTA_CONFIGURATIONS_ESP32_H_
|
|
|
|
|
#define _TASMOTA_CONFIGURATIONS_ESP32_H_
|
|
|
|
|
|
|
|
|
|
#ifdef ESP32
|
|
|
|
|
|
2022-05-03 12:21:15 +01:00
|
|
|
/*********************************************************************************************\
|
2022-05-05 10:19:39 +01:00
|
|
|
* [tasmota32x-safeboot.bin]
|
2022-05-03 12:21:15 +01:00
|
|
|
* Provide an image with useful supported sensors enabled
|
2022-05-04 09:07:24 +01:00
|
|
|
*
|
|
|
|
|
* Is a copy of FIRMWARE_MINIMAL with some additional features enabled
|
2022-05-03 12:21:15 +01:00
|
|
|
\*********************************************************************************************/
|
|
|
|
|
|
2022-05-05 10:19:39 +01:00
|
|
|
#ifdef FIRMWARE_SAFEBOOT
|
2022-05-03 12:21:15 +01:00
|
|
|
|
2023-02-22 11:05:04 +00:00
|
|
|
#ifndef CODE_IMAGE_STR
|
|
|
|
|
#define CODE_IMAGE_STR "safeboot"
|
|
|
|
|
#endif
|
2022-05-03 12:21:15 +01:00
|
|
|
|
|
|
|
|
#undef FIRMWARE_LITE // Disable tasmota-lite with no sensors
|
|
|
|
|
#undef FIRMWARE_SENSORS // Disable tasmota-sensors with useful sensors enabled
|
|
|
|
|
#undef FIRMWARE_KNX_NO_EMULATION // Disable tasmota-knx with KNX but without Emulation
|
|
|
|
|
#undef FIRMWARE_DISPLAYS // Disable tasmota-display with display drivers enabled
|
|
|
|
|
#undef FIRMWARE_IR // Disable tasmota-ir with IR full protocols activated
|
|
|
|
|
#undef FIRMWARE_WEBCAM
|
|
|
|
|
#undef FIRMWARE_BLUETOOTH
|
|
|
|
|
#undef FIRMWARE_LVGL
|
|
|
|
|
#undef FIRMWARE_TASMOTA32
|
|
|
|
|
|
2022-05-04 09:07:24 +01:00
|
|
|
/*-------------------------------------------------------------------------------------------*\
|
|
|
|
|
* Start copy of all undefines from FIRMWARE_MINIMAL
|
|
|
|
|
\*-------------------------------------------------------------------------------------------*/
|
|
|
|
|
|
2022-05-03 12:21:15 +01:00
|
|
|
#undef USE_IMPROV // Disable support for IMPROV serial protocol as used by esp-web-tools (+2k code)
|
|
|
|
|
#undef USE_TASMESH // Disable Tasmota Mesh using ESP-NOW (+11k code)
|
|
|
|
|
#undef USE_ARDUINO_OTA // Disable support for Arduino OTA
|
|
|
|
|
#undef USE_INFLUXDB // Disable influxdb support (+5k code)
|
|
|
|
|
#undef USE_DOMOTICZ // Disable Domoticz
|
|
|
|
|
#undef USE_HOME_ASSISTANT // Disable Home Assistant
|
|
|
|
|
#undef USE_TASMOTA_DISCOVERY // Disable Tasmota Discovery support (+2k code)
|
|
|
|
|
#undef USE_TELEGRAM // Disable support for Telegram protocol (+49k code, +7.0k mem and +4.8k additional during connection handshake)
|
|
|
|
|
//#undef USE_MQTT_TLS // Disable TLS support won't work as the MQTTHost is not set
|
|
|
|
|
#undef USE_KNX // Disable KNX IP Protocol Support
|
|
|
|
|
//#undef USE_WEBSERVER // Disable Webserver
|
|
|
|
|
#undef USE_ENHANCED_GUI_WIFI_SCAN // Disable wifi scan output with BSSID (+0k5 code)
|
|
|
|
|
#undef USE_WEBSEND_RESPONSE // Disable command WebSend response message (+1k code)
|
|
|
|
|
#undef USE_EMULATION // Disable Wemo or Hue emulation
|
|
|
|
|
#undef USE_EMULATION_HUE // Disable Hue Bridge emulation for Alexa (+14k code, +2k mem common)
|
|
|
|
|
#undef USE_EMULATION_WEMO // Disable Belkin WeMo emulation for Alexa (+6k code, +2k mem common)
|
|
|
|
|
#undef USE_CUSTOM // Disable Custom features
|
|
|
|
|
#undef USE_DISCOVERY // Disable Discovery services for both MQTT and web server
|
|
|
|
|
#undef USE_TIMERS // Disable support for up to 16 timers
|
|
|
|
|
#undef USE_TIMERS_WEB // Disable support for timer webpage
|
|
|
|
|
#undef USE_SUNRISE // Disable support for Sunrise and sunset tools
|
|
|
|
|
#undef USE_PING // Disable Ping command (+2k code)
|
|
|
|
|
#undef USE_UNISHOX_COMPRESSION // Disable support for string compression in Rules or Scripts
|
|
|
|
|
#undef USE_RULES // Disable support for rules
|
|
|
|
|
#undef USE_SCRIPT // Disable support for script
|
|
|
|
|
|
|
|
|
|
// -- Optional modules ----------------------------
|
|
|
|
|
#undef ROTARY_V1 // Disable support for MI Desk Lamp
|
|
|
|
|
#undef USE_SONOFF_RF // Disable support for Sonoff Rf Bridge (+3k2 code)
|
|
|
|
|
#undef USE_RF_FLASH // Disable support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB
|
|
|
|
|
#undef USE_SONOFF_SC // Disable support for Sonoff Sc (+1k1 code)
|
|
|
|
|
#undef USE_TUYA_MCU // Disable support for Tuya Serial MCU
|
|
|
|
|
#undef USE_ARMTRONIX_DIMMERS // Disable support for Armtronix Dimmers (+1k4 code)
|
|
|
|
|
#undef USE_PS_16_DZ // Disable support for PS-16-DZ Dimmer and Sonoff L1 (+2k code)
|
|
|
|
|
#undef USE_SONOFF_IFAN // Disable support for Sonoff iFan02 and iFan03 (+2k code)
|
|
|
|
|
#undef USE_BUZZER // Disable support for a buzzer (+0k6 code)
|
|
|
|
|
#undef USE_ARILUX_RF // Disable support for Arilux RF remote controller
|
|
|
|
|
#undef USE_SHUTTER // Disable Shutter support for up to 4 shutter with different motortypes (+6k code)
|
|
|
|
|
#undef USE_DEEPSLEEP // Disable support for deepsleep (+1k code)
|
|
|
|
|
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
|
|
|
|
|
#undef USE_HOTPLUG // Disable support for HotPlug
|
|
|
|
|
#undef USE_DEVICE_GROUPS // Disable support for device groups (+3k5 code)
|
|
|
|
|
#undef USE_PWM_DIMMER // Disable support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
|
|
|
|
|
#undef USE_PWM_DIMMER_REMOTE // Disbale support for remote switches to PWM Dimmer
|
|
|
|
|
#undef USE_KEELOQ // Disable support for Jarolift rollers by Keeloq algorithm (+4k5 code)
|
|
|
|
|
#undef USE_SONOFF_D1 // Disable support for Sonoff D1 Dimmer (+0k7 code)
|
|
|
|
|
#undef USE_SHELLY_DIMMER // Disable support for Shelly Dimmer (+3k code)
|
|
|
|
|
|
|
|
|
|
// -- Optional light modules ----------------------
|
|
|
|
|
#undef USE_LIGHT // Disable support for lights
|
|
|
|
|
|
|
|
|
|
#undef USE_COUNTER // Disable counters
|
|
|
|
|
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
|
|
|
|
#undef USE_DS18x20 // Disable DS18x20 sensor
|
|
|
|
|
|
|
|
|
|
#undef USE_I2C // Disable all I2C sensors and devices
|
|
|
|
|
#undef USE_SPI // Disable all SPI devices
|
|
|
|
|
#undef USE_DISPLAY // Disable Display support
|
|
|
|
|
|
|
|
|
|
#undef USE_MHZ19 // Disable support for MH-Z19 CO2 sensor
|
|
|
|
|
#undef USE_SENSEAIR // Disable support for SenseAir K30, K70 and S8 CO2 sensor
|
|
|
|
|
#undef USE_PMS5003 // Disable support for PMS5003 and PMS7003 particle concentration sensor
|
|
|
|
|
#undef USE_NOVA_SDS // Disable support for SDS011 and SDS021 particle concentration sensor
|
|
|
|
|
#undef USE_HPMA // Disable support for Honeywell HPMA115S0 particle concentration sensor
|
|
|
|
|
#undef USE_SR04 // Disable support for HC-SR04 ultrasonic devices (+1k code)
|
2022-12-14 11:18:49 +00:00
|
|
|
#undef USE_ME007 // Disable support for ME007 ultrasonic devices (+1k5 code)
|
2022-05-03 12:21:15 +01:00
|
|
|
#undef USE_DYP // Disable support for DYP ME-007 ultrasonic distance sensor, serial port version (+0k5 code)
|
|
|
|
|
#undef USE_SERIAL_BRIDGE // Disable support for software Serial Bridge
|
2022-07-20 09:41:02 +01:00
|
|
|
#undef USE_MODBUS_BRIDGE // Disable support for software Modbus Bridge (+3k code)
|
2022-05-03 12:21:15 +01:00
|
|
|
#undef USE_TCP_BRIDGE // DIsable support for Serial to TCP bridge (+1.3k code)
|
|
|
|
|
#undef USE_MP3_PLAYER // Disable DFPlayer Mini MP3 Player RB-DFR-562 commands: play, volume and stop
|
|
|
|
|
#undef USE_AZ7798 // Disable support for AZ-Instrument 7798 CO2 datalogger
|
|
|
|
|
#undef USE_PN532_HSU // Disable support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
|
|
|
|
|
#undef USE_ZIGBEE // Disable serial communication with Zigbee CC2530 flashed with ZNP
|
|
|
|
|
#undef USE_RDM6300 // Disable support for RDM6300 125kHz RFID Reader (+0k8)
|
|
|
|
|
#undef USE_IBEACON // Disable support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
|
|
|
|
|
#undef USE_GPS // Disable support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
|
|
|
|
|
#undef USE_HM10 // (ESP8266 only) Disable support for HM-10 as a BLE-bridge for the LYWSD03 (+5k1 code)
|
|
|
|
|
#undef USE_BLE_ESP32 // (ESP32 only) Disable support for native BLE on ESP32 - use new driver
|
|
|
|
|
#undef USE_MI_ESP32 // (ESP32 only) Disable support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
|
|
|
|
|
#undef USE_HRXL // Disable support for MaxBotix HRXL-MaxSonar ultrasonic range finders (+0k7)
|
|
|
|
|
#undef USE_TASMOTA_CLIENT // Disable support for Arduino Uno/Pro Mini via serial interface including flashing (+2k3 code, 44 mem)
|
|
|
|
|
#undef USE_OPENTHERM // Disable support for OpenTherm (+15k code)
|
|
|
|
|
#undef USE_MIEL_HVAC // Disable support for Mitsubishi Electric HVAC serial interface (+5k code)
|
|
|
|
|
#undef USE_PROJECTOR_CTRL // Disable support for LCD/DLP Projector serial control interface
|
|
|
|
|
#undef USE_AS608 // Disable support for AS608 optical and R503 capacitive fingerprint sensor (+3k4 code)
|
|
|
|
|
#undef USE_TFMINIPLUS // Disable support for TFmini Plus (TFmini, TFmini-S) LiDAR modules via UART interface (+0k8)
|
|
|
|
|
#undef USE_HRG15 // Disable support for Hydreon RG-15 Solid State Rain sensor (+1k5 code)
|
|
|
|
|
#undef USE_VINDRIKTNING // Disable support for IKEA VINDRIKTNING particle concentration sensor (+0k6 code)
|
|
|
|
|
|
|
|
|
|
#undef USE_ENERGY_SENSOR // Disable energy sensors
|
|
|
|
|
|
|
|
|
|
#undef USE_DHT // Disable support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
|
|
|
|
#undef USE_MAX31855 // Disable MAX31855 K-Type thermocouple sensor using softSPI
|
|
|
|
|
#undef USE_MAX31865 // Disable support for MAX31865 RTD sensors using softSPI
|
|
|
|
|
#undef USE_LMT01 // Disable support for TI LMT01 temperature sensor, count pulses on single GPIO (+0k5 code)
|
|
|
|
|
#undef USE_IR_REMOTE // Disable IR driver
|
|
|
|
|
#undef USE_TM1638 // Disable support for TM1638 switches copying Switch1 .. Switch8
|
|
|
|
|
#undef USE_HX711 // Disable support for HX711 load cell
|
|
|
|
|
#undef USE_TX20_WIND_SENSOR // Disable support for La Crosse TX20 anemometer
|
|
|
|
|
#undef USE_TX23_WIND_SENSOR // Disable support for La Crosse TX23 anemometer
|
|
|
|
|
#undef USE_WINDMETER // Disable support for analog anemometer (+2k2 code)
|
|
|
|
|
#undef USE_RC_SWITCH // Disable support for RF transceiver using library RcSwitch
|
|
|
|
|
#undef USE_RF_SENSOR // Disable support for RF sensor receiver (434MHz or 868MHz) (+0k8 code)
|
|
|
|
|
#undef USE_HRE // Disable support for Badger HR-E Water Meter (+1k4 code)
|
|
|
|
|
#undef USE_A4988_STEPPER // Disable support for A4988_Stepper
|
|
|
|
|
#undef USE_THERMOSTAT // Disable support for Thermostat
|
|
|
|
|
#undef USE_PROMETHEUS // Disable support for https://prometheus.io/ metrics exporting over HTTP /metrics endpoint
|
|
|
|
|
#undef DEBUG_THEO // Disable debug code
|
|
|
|
|
#undef USE_DEBUG_DRIVER // Disable debug code
|
|
|
|
|
#undef USE_AC_ZERO_CROSS_DIMMER // Disable support for AC_ZERO_CROSS_DIMMER
|
2022-05-04 09:07:24 +01:00
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------------------------*\
|
|
|
|
|
* End copy of all undefines from FIRMWARE_MINIMAL
|
|
|
|
|
*
|
2022-05-05 10:19:39 +01:00
|
|
|
* Start FIRMWARE_SAFEBOOT specific additions
|
2022-05-04 09:07:24 +01:00
|
|
|
\*-------------------------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
|
|
#define FIRMWARE_MINIMAL
|
|
|
|
|
|
|
|
|
|
#undef FIRMWARE_MINIMAL_ONLY
|
|
|
|
|
|
|
|
|
|
#undef USE_ESP32_SENSORS
|
|
|
|
|
#undef USE_UFILESYS
|
|
|
|
|
#undef GUI_TRASH_FILE
|
|
|
|
|
#undef GUI_EDIT_FILE
|
|
|
|
|
#undef USE_PING
|
|
|
|
|
#undef USE_AUTOCONF
|
|
|
|
|
#undef USE_BERRY
|
|
|
|
|
|
|
|
|
|
#define USE_TLS
|
|
|
|
|
#define USE_WEBSERVER
|
|
|
|
|
#define USE_WEBCLIENT
|
|
|
|
|
#define USE_WEBCLIENT_HTTPS
|
2022-11-19 13:59:36 +00:00
|
|
|
#define USE_SERIAL_BRIDGE // Add support for software Serial Bridge console Tee (+2k code)
|
2022-08-30 17:46:22 +01:00
|
|
|
#define USE_ETHERNET
|
2022-05-04 09:07:24 +01:00
|
|
|
|
2022-05-05 10:19:39 +01:00
|
|
|
#endif // FIRMWARE_SAFEBOOT
|
2022-05-03 12:21:15 +01:00
|
|
|
|
2020-05-12 14:42:16 +01:00
|
|
|
/*********************************************************************************************\
|
|
|
|
|
* [tasmota32-webcam.bin]
|
|
|
|
|
* Provide an image with useful supported sensors enabled
|
|
|
|
|
\*********************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef FIRMWARE_WEBCAM
|
|
|
|
|
|
2023-02-22 11:05:04 +00:00
|
|
|
#ifndef CODE_IMAGE_STR
|
|
|
|
|
#define CODE_IMAGE_STR "webcam"
|
|
|
|
|
#endif
|
2020-05-12 14:42:16 +01:00
|
|
|
|
|
|
|
|
#define USE_WEBCAM
|
2021-06-05 17:48:21 +01:00
|
|
|
#define ENABLE_RTSPSERVER
|
2021-03-26 17:32:00 +00:00
|
|
|
#define USE_SPI
|
2021-09-16 18:24:01 +01:00
|
|
|
#define USE_SDCARD
|
|
|
|
|
|
|
|
|
|
#undef USE_I2C
|
|
|
|
|
#undef USE_HOME_ASSISTANT
|
2022-04-19 17:07:25 +01:00
|
|
|
#define USE_TASMOTA_DISCOVERY // Enable Tasmota Discovery support (+2k code)
|
2022-10-14 14:32:57 +01:00
|
|
|
#undef USE_DOMOTICZ
|
|
|
|
|
#undef USE_SERIAL_BRIDGE
|
|
|
|
|
#undef ROTARY_V1
|
2021-09-16 18:24:01 +01:00
|
|
|
#undef USE_IR_REMOTE
|
2022-10-14 14:32:57 +01:00
|
|
|
#undef USE_ADC
|
2021-09-16 18:24:01 +01:00
|
|
|
#undef USE_AC_ZERO_CROSS_DIMMER
|
|
|
|
|
#undef USE_PWM_DIMMER
|
2022-10-14 14:32:57 +01:00
|
|
|
#undef USE_PWM_DIMMER_REMOTE
|
2021-09-16 18:24:01 +01:00
|
|
|
#undef USE_TUYA_MCU
|
|
|
|
|
#undef USE_EMULATION_HUE
|
|
|
|
|
#undef USE_EMULATION_WEMO
|
2022-10-14 14:32:57 +01:00
|
|
|
#undef USE_BUZZER
|
2021-09-16 18:24:01 +01:00
|
|
|
#undef USE_ARILUX_RF
|
|
|
|
|
#undef USE_DS18x20
|
2022-10-14 14:32:57 +01:00
|
|
|
#undef USE_BMP
|
|
|
|
|
#undef USE_DHT
|
|
|
|
|
#undef USE_BH1750
|
2021-09-16 18:24:01 +01:00
|
|
|
#undef USE_WS2812
|
|
|
|
|
#undef USE_ENERGY_SENSOR
|
2022-10-14 14:32:57 +01:00
|
|
|
#undef USE_SHUTTER
|
|
|
|
|
#undef USE_DEVICE_GROUPS
|
2022-01-08 22:33:00 +00:00
|
|
|
//#undef USE_BERRY // Disable Berry scripting language
|
2021-09-16 18:24:01 +01:00
|
|
|
#undef USE_MI_ESP32 // (ESP32 only) Disable support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
|
2022-10-14 14:32:57 +01:00
|
|
|
#undef USE_BLE_ESP32
|
2020-05-12 14:42:16 +01:00
|
|
|
#endif // FIRMWARE_WEBCAM
|
|
|
|
|
|
2021-02-11 13:53:21 +00:00
|
|
|
/*********************************************************************************************\
|
|
|
|
|
* [tasmota32-bluetooth.bin]
|
|
|
|
|
* Provide an image with BLE support
|
|
|
|
|
\*********************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef FIRMWARE_BLUETOOTH
|
|
|
|
|
|
2023-02-22 11:05:04 +00:00
|
|
|
#ifndef CODE_IMAGE_STR
|
|
|
|
|
#define CODE_IMAGE_STR "bluetooth"
|
|
|
|
|
#endif
|
2021-02-11 13:53:21 +00:00
|
|
|
|
|
|
|
|
#undef MODULE
|
2021-02-11 16:06:47 +00:00
|
|
|
#define MODULE WEMOS // [Module] Select default module from tasmota_template.h
|
2021-02-11 13:53:21 +00:00
|
|
|
#undef FALLBACK_MODULE
|
2021-02-11 16:06:47 +00:00
|
|
|
#define FALLBACK_MODULE WEMOS // [Module2] Select default module on fast reboot where USER_MODULE is user template
|
2021-02-11 13:53:21 +00:00
|
|
|
|
2021-10-03 14:21:25 +01:00
|
|
|
#define USE_INFLUXDB // Enable influxdb support (+5k code)
|
2021-09-17 19:26:36 +01:00
|
|
|
#undef USE_HOME_ASSISTANT
|
2022-04-19 17:07:25 +01:00
|
|
|
#define USE_TASMOTA_DISCOVERY
|
2021-09-17 19:26:36 +01:00
|
|
|
|
2021-02-11 13:53:21 +00:00
|
|
|
#define USE_SDCARD
|
2021-04-15 15:08:39 +01:00
|
|
|
|
2021-02-11 13:53:21 +00:00
|
|
|
#define USE_ADC
|
2021-11-15 13:36:42 +00:00
|
|
|
//#undef USE_BERRY // Disable Berry scripting language
|
2022-02-12 20:00:15 +00:00
|
|
|
#if defined(USE_MI_HOMEKIT) // Switch between Homekit and full BLE driver
|
|
|
|
|
#define USE_MI_ESP32
|
|
|
|
|
#if(USE_MI_HOMEKIT != 1) // Enable(1)/ Disable(0) Homekit, only for the .c-file
|
|
|
|
|
#undef USE_MI_HOMEKIT
|
|
|
|
|
#endif // disable USE_MI_HOMEKIT
|
|
|
|
|
#else
|
2022-12-17 18:28:25 +00:00
|
|
|
#define USE_ETHERNET // Add support for ethernet (+20k code)
|
2022-02-12 20:00:15 +00:00
|
|
|
#define USE_BLE_ESP32 // Enable full BLE driver
|
|
|
|
|
#define USE_EQ3_ESP32
|
|
|
|
|
#define USE_MI_ESP32 // (ESP32 only) Add support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
|
|
|
|
|
#endif // enable USE_MI_HOMEKIT
|
2022-01-19 16:12:02 +00:00
|
|
|
|
2021-02-11 16:06:47 +00:00
|
|
|
#endif // FIRMWARE_BLUETOOTH
|
2021-02-11 13:53:21 +00:00
|
|
|
|
2021-06-16 16:45:44 +01:00
|
|
|
/*********************************************************************************************\
|
|
|
|
|
* [tasmota32-lvgl.bin]
|
|
|
|
|
* Provide an image which includes uDisplay and LVGL driver
|
|
|
|
|
\*********************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef FIRMWARE_LVGL
|
|
|
|
|
|
2023-02-22 11:05:04 +00:00
|
|
|
#ifndef CODE_IMAGE_STR
|
|
|
|
|
#define CODE_IMAGE_STR "lvgl-haspmota"
|
|
|
|
|
#endif
|
2021-06-16 16:45:44 +01:00
|
|
|
|
|
|
|
|
#undef MODULE
|
|
|
|
|
#define MODULE WEMOS // [Module] Select default module from tasmota_template.h
|
|
|
|
|
#undef FALLBACK_MODULE
|
|
|
|
|
#define FALLBACK_MODULE WEMOS // [Module2] Select default module on fast reboot where USER_MODULE is user template
|
|
|
|
|
|
|
|
|
|
#undef USE_DOMOTICZ
|
|
|
|
|
#undef USE_HOME_ASSISTANT
|
2022-04-19 17:07:25 +01:00
|
|
|
#define USE_TASMOTA_DISCOVERY // Enable Tasmota Discovery support (+2k code)
|
2021-06-16 16:45:44 +01:00
|
|
|
|
2021-11-26 16:41:45 +00:00
|
|
|
#define USE_WEBCLIENT_HTTPS
|
|
|
|
|
|
2021-06-16 16:45:44 +01:00
|
|
|
#define USE_I2S
|
|
|
|
|
#define USE_SPI
|
|
|
|
|
#define USE_LVGL
|
2022-05-20 20:29:39 +01:00
|
|
|
#define USE_LVGL_HASPMOTA
|
2022-02-05 16:04:31 +00:00
|
|
|
#define USE_LVGL_FREETYPE
|
2022-02-07 21:16:28 +00:00
|
|
|
#undef SET_ESP32_STACK_SIZE
|
|
|
|
|
#define SET_ESP32_STACK_SIZE (24 * 1024)
|
2022-02-05 16:04:31 +00:00
|
|
|
#define USE_LVGL_PNG_DECODER
|
2021-06-16 16:45:44 +01:00
|
|
|
#define USE_DISPLAY
|
2021-09-13 14:47:04 +01:00
|
|
|
#define SHOW_SPLASH
|
2021-06-16 16:45:44 +01:00
|
|
|
#define USE_XPT2046
|
|
|
|
|
#define USE_FT5206
|
|
|
|
|
#define USE_MPU_ACCEL
|
2022-04-16 16:43:10 +01:00
|
|
|
#define USE_RTC_CHIPS // Enable RTC chip support and NTP server - Select only one
|
|
|
|
|
#define USE_BM8563
|
2021-06-16 16:45:44 +01:00
|
|
|
#define USE_MLX90614
|
|
|
|
|
#define USE_UNIVERSAL_DISPLAY
|
|
|
|
|
#define USE_DISPLAY_LVGL_ONLY
|
|
|
|
|
|
|
|
|
|
#undef USE_DISPLAY_MODES1TO5
|
|
|
|
|
#undef USE_DISPLAY_LCD
|
|
|
|
|
#undef USE_DISPLAY_SSD1306
|
|
|
|
|
#undef USE_DISPLAY_MATRIX
|
|
|
|
|
#undef USE_DISPLAY_SEVENSEG
|
|
|
|
|
|
|
|
|
|
#define USE_ENHANCED_GUI_WIFI_SCAN
|
|
|
|
|
|
|
|
|
|
#define USE_SDCARD
|
|
|
|
|
|
|
|
|
|
#define ROTARY_V1 // Add support for Rotary Encoder as used in MI Desk Lamp
|
|
|
|
|
|
|
|
|
|
#define USE_TUYA_MCU // Add support for Tuya Serial MCU
|
|
|
|
|
#ifndef TUYA_DIMMER_ID
|
|
|
|
|
#define TUYA_DIMMER_ID 0 // Default dimmer Id
|
|
|
|
|
#endif
|
|
|
|
|
#undef USE_ARMTRONIX_DIMMERS // Disable support for Armtronix Dimmers (+1k4 code)
|
|
|
|
|
//#undef USE_PS_16_DZ // Disable support for PS-16-DZ Dimmer (+2k code)
|
|
|
|
|
#undef USE_SONOFF_IFAN // Disable support for Sonoff iFan02 and iFan03 (+2k code)
|
|
|
|
|
#define USE_BUZZER // Add support for a buzzer (+0k6 code)
|
|
|
|
|
//#undef USE_ARILUX_RF // Disable support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
|
|
|
|
//#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
|
|
|
|
|
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
|
|
|
|
|
//#define USE_HOTPLUG // Add support for sensor HotPlug
|
|
|
|
|
//#undef USE_DEVICE_GROUPS // Disable support for device groups (+5k6 code)
|
|
|
|
|
#undef USE_PWM_DIMMER // Disable support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
|
|
|
|
|
#undef USE_KEELOQ // Disable support for Jarolift rollers by Keeloq algorithm (+4k5 code)
|
|
|
|
|
#undef USE_SONOFF_D1 // Disable support for Sonoff D1 Dimmer (+0k7 code)
|
|
|
|
|
#undef USE_SHELLY_DIMMER // Disable support for Shelly Dimmer (+3k code)
|
|
|
|
|
|
|
|
|
|
#define USE_LIGHT_PALETTE // Add support for color palette (+0k9 code)
|
|
|
|
|
#undef USE_EMULATION_WEMO
|
|
|
|
|
//#undef USE_EMULATION_HUE
|
|
|
|
|
|
2021-06-18 15:16:08 +01:00
|
|
|
#define USE_WS2812
|
|
|
|
|
|
2021-06-16 16:45:44 +01:00
|
|
|
#define USE_DS18x20 // Add support for DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
|
|
|
|
|
2023-02-05 15:22:18 +00:00
|
|
|
#define USE_ENERGY_SENSOR // Add energy to support Shelly Pro 4PM display (+38k code)
|
|
|
|
|
#define USE_SHELLY_PRO
|
2021-06-16 16:45:44 +01:00
|
|
|
|
|
|
|
|
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
|
|
|
|
#undef USE_MLX90614
|
|
|
|
|
|
|
|
|
|
#define USE_SHT // [I2cDriver8] Enable SHT1X sensor (+1k4 code)
|
|
|
|
|
#define USE_HTU // [I2cDriver9] Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
|
|
|
|
|
#define USE_BMP // [I2cDriver10] Enable BMP085/BMP180/BMP280/BME280 sensors (I2C addresses 0x76 and 0x77) (+4k4 code)
|
2022-01-19 16:05:39 +00:00
|
|
|
// #define USE_BME68X // Enable support for BME680/BME688 sensor using Bosch BME68x library (+6k9 code)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_BH1750 // [I2cDriver11] Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
|
|
|
|
|
//#define USE_VEML6070 // [I2cDriver12] Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+1k5 code)
|
|
|
|
|
//#define USE_VEML6075 // [I2cDriver49] Enable VEML6075 UVA/UVB/UVINDEX Sensor (I2C address 0x10) (+2k1 code)
|
|
|
|
|
//#define USE_VEML7700 // [I2cDriver50] Enable VEML7700 Ambient Light sensor (I2C addresses 0x10) (+4k5 code)
|
|
|
|
|
//#define USE_ADS1115 // [I2cDriver13] Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
|
|
|
|
|
//#define USE_INA219 // [I2cDriver14] Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
|
|
|
|
|
//#define USE_INA226 // [I2cDriver35] Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
|
|
|
|
|
//#define USE_SHT3X // [I2cDriver15] Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
|
|
|
|
|
//#define USE_TSL2561 // [I2cDriver16] Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
|
|
|
|
|
//#define USE_TSL2591 // [I2cDriver40] Enable TSL2591 sensor (I2C address 0x29) using library Adafruit_TSL2591 (+1k6 code)
|
|
|
|
|
//#define USE_MGS // [I2cDriver17] Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
|
|
|
|
|
//#define USE_SGP30 // [I2cDriver18] Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
|
2022-08-25 20:51:51 +01:00
|
|
|
//#define USE_SGP40 // [I2cDriver69] Enable SGP40 sensor (I2C address 0x59) (+1k4 code)
|
2023-01-29 07:06:25 +00:00
|
|
|
//#define USE_SEN5X // [I2cDriver76] Enable SEN5X sensor (I2C address 0x69) (+3k code)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_SI1145 // [I2cDriver19] Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
|
|
|
|
|
//#define USE_LM75AD // [I2cDriver20] Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
|
|
|
|
|
//#define USE_APDS9960 // [I2cDriver21] Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
|
|
|
|
|
//#define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
2023-03-02 10:24:54 +00:00
|
|
|
#define USE_MCP23XXX_DRV // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
|
|
|
|
//#define USE_MPR121 // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
|
|
|
|
//#define USE_CCS811 // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
|
|
|
|
//#define USE_CCS811_V2 // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)
|
|
|
|
|
//#define USE_MPU6050 // [I2cDriver25] Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+3K3 of code and 188 Bytes of RAM)
|
|
|
|
|
//#define USE_MGC3130 // [I2cDriver27] Enable MGC3130 Electric Field Effect Sensor (I2C address 0x42) (+2k7 code, 0k3 mem)
|
|
|
|
|
//#define USE_MAX44009 // [I2cDriver28] Enable MAX44009 Ambient Light sensor (I2C addresses 0x4A and 0x4B) (+0k8 code)
|
|
|
|
|
//#define USE_SCD30 // [I2cDriver29] Enable Sensiron SCd30 CO2 sensor (I2C address 0x61) (+3k3 code)
|
2021-09-16 08:06:52 +01:00
|
|
|
//#define USE_SCD40 // [I2cDriver62] Enable Sensiron SCd40 CO2 sensor (I2C address 0x62) (+3k3 code)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_SPS30 // [I2cDriver30] Enable Sensiron SPS30 particle sensor (I2C address 0x69) (+1.7 code)
|
2023-03-02 10:24:54 +00:00
|
|
|
#define USE_ADE7953 // [I2cDriver7] Enable ADE7953 Energy monitor as used on Shelly 2.5 (I2C address 0x38) (+1k5)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_VL53L0X // [I2cDriver31] Enable VL53L0x time of flight sensor (I2C address 0x29) (+4k code)
|
|
|
|
|
//#define USE_VL53L1X // [I2cDriver54] Enable VL53L1X time of flight sensor (I2C address 0x29) using Pololu VL53L1X library (+2k9 code)
|
|
|
|
|
//#define USE_TOF10120 // [I2cDriver57] Enable TOF10120 time of flight sensor (I2C address 0x52) (+0k6 code)
|
|
|
|
|
//#define USE_MLX90614 // [I2cDriver32] Enable MLX90614 ir temp sensor (I2C address 0x5a) (+0.6k code)
|
|
|
|
|
//#define USE_CHIRP // [I2cDriver33] Enable CHIRP soil moisture sensor (variable I2C address, default 0x20)
|
|
|
|
|
//#define USE_PAJ7620 // [I2cDriver34] Enable PAJ7620 gesture sensor (I2C address 0x73) (+2.5k code)
|
|
|
|
|
//#define USE_PCF8574 // [I2cDriver2] Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x26 and 0x39 - 0x3F) (+1k9 code)
|
|
|
|
|
//#define USE_HIH6 // [I2cDriver36] Enable Honeywell HIH Humidity and Temperature sensor (I2C address 0x27) (+0k6)
|
|
|
|
|
//#define USE_DHT12 // [I2cDriver41] Enable DHT12 humidity and temperature sensor (I2C address 0x5C) (+0k7 code)
|
|
|
|
|
//#define USE_DS1624 // [I2cDriver42] Enable DS1624, DS1621 temperature sensor (I2C addresses 0x48 - 0x4F) (+1k2 code)
|
|
|
|
|
//#define USE_AHT1x // [I2cDriver43] Enable AHT10/15 humidity and temperature sensor (I2C address 0x38, 0x39) (+0k8 code)
|
2021-09-20 14:30:12 +01:00
|
|
|
//#define USE_AHT2x // [I2cDriver43] Enable AHT20 instead of AHT1x humidity and temperature sensor (I2C address 0x38) (+0k8 code)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_WEMOS_MOTOR_V1 // [I2cDriver44] Enable Wemos motor driver V1 (I2C addresses 0x2D - 0x30) (+0k7 code)
|
|
|
|
|
#define WEMOS_MOTOR_V1_ADDR 0x30 // Default I2C address 0x30
|
|
|
|
|
#define WEMOS_MOTOR_V1_FREQ 1000 // Default frequency
|
|
|
|
|
//#define USE_HDC1080 // [I2cDriver45] Enable HDC1080 temperature/humidity sensor (I2C address 0x40) (+1k5 code)
|
|
|
|
|
//#define USE_IAQ // [I2cDriver46] Enable iAQ-core air quality sensor (I2C address 0x5a) (+0k6 code)
|
|
|
|
|
//#define USE_AS3935 // [I2cDriver48] Enable AS3935 Franklin Lightning Sensor (I2C address 0x03) (+5k4 code)
|
|
|
|
|
//#define USE_MCP9808 // [I2cDriver51] Enable MCP9808 temperature sensor (I2C addresses 0x18 - 0x1F) (+0k9 code)
|
|
|
|
|
//#define USE_HP303B // [I2cDriver52] Enable HP303B temperature and pressure sensor (I2C address 0x76 or 0x77) (+6k2 code)
|
|
|
|
|
//#define USE_MLX90640 // [I2cDriver53] Enable MLX90640 IR array temperature sensor (I2C address 0x33) (+20k code)
|
|
|
|
|
//#define USE_EZOPH // [I2cDriver55] Enable support for EZO's pH sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOORP // [I2cDriver55] Enable support for EZO's ORP sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZORTD // [I2cDriver55] Enable support for EZO's RTD sensor (+0k2 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOHUM // [I2cDriver55] Enable support for EZO's HUM sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOEC // [I2cDriver55] Enable support for EZO's EC sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOCO2 // [I2cDriver55] Enable support for EZO's CO2 sensor (+0k2 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOO2 // [I2cDriver55] Enable support for EZO's O2 sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOPRS // [I2cDriver55] Enable support for EZO's PRS sensor (+0k7 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOFLO // [I2cDriver55] Enable support for EZO's FLO sensor (+0k4 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZODO // [I2cDriver55] Enable support for EZO's DO sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZORGB // [I2cDriver55] Enable support for EZO's RGB sensor (+0k5 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOPMP // [I2cDriver55] Enable support for EZO's PMP sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_SEESAW_SOIL // [I2cDriver56] Enable Capacitice Soil Moisture & Temperature Sensor (I2C addresses 0x36 - 0x39) (+1k3 code)
|
2021-07-13 11:01:46 +01:00
|
|
|
//#define USE_MPU_ACCEL // [I2cDriver58] Enable MPU6886/MPU9250 - found in M5Stack - support both I2C buses on ESP32 (I2C address 0x68) (+2k code)
|
|
|
|
|
//#define USE_AM2320 // [I2cDriver60] Enable AM2320 temperature and humidity Sensor (I2C address 0x5C) (+1k code)
|
|
|
|
|
//#define USE_T67XX // [I2cDriver61] Enable Telaire T67XX CO2 sensor (I2C address 0x15) (+1k3 code)
|
2022-03-17 15:03:40 +00:00
|
|
|
//#define USE_DS3502 // [I2CDriver67] Enable DS3502 digital potentiometer (I2C address 0x28 - 0x2B) (+0k4 code)
|
2022-06-04 13:15:16 +01:00
|
|
|
//#define USE_HYT // [I2CDriver68] Enable HYTxxx temperature and humidity sensor (I2C address 0x28) (+0k5 code)
|
2022-09-02 12:13:47 +01:00
|
|
|
//#define USE_LUXV30B // [I2CDriver70] Enable RFRobot SEN0390 LuxV30b ambient light sensor (I2C address 0x4A) (+0k5 code)
|
2023-03-20 09:21:16 +00:00
|
|
|
//#define USE_PMSA003I // [I2cDriver78] Enable PMSA003I Air Quality Sensor (I2C address 0x12) (+1k8 code)
|
2021-06-16 16:45:44 +01:00
|
|
|
|
2022-04-16 16:43:10 +01:00
|
|
|
//#define USE_RTC_CHIPS // Enable RTC chip support and NTP server - Select only one
|
|
|
|
|
// #define USE_DS3231 // [I2cDriver26] Enable DS3231 RTC (I2C address 0x68) (+1k2 code)
|
|
|
|
|
// #define USE_BM8563 // [I2cDriver59] Enable BM8563 RTC - found in M5Stack - support both I2C buses on ESP32 (I2C address 0x51) (+2.5k code)
|
|
|
|
|
// #define USE_PCF85363 // [I2cDriver66] Enable PCF85363 RTC - found Shelly 3EM (I2C address 0x51) (+0k7 code)
|
|
|
|
|
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
|
|
|
|
//#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
2022-01-27 13:42:58 +00:00
|
|
|
//#define USE_CM110x // Add support for CM110x CO2 sensors (+2k7 code)
|
2021-06-16 16:45:44 +01:00
|
|
|
#ifndef CO2_LOW
|
|
|
|
|
#define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef CO2_HIGH
|
|
|
|
|
#define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
|
|
|
|
#endif
|
|
|
|
|
//#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
|
|
|
|
|
//#define PMS_MODEL_PMS3003 // Enable support of PMS3003 instead of PMS5003/PMS7003 (needs the USE_PMS5003 above)
|
2022-10-31 20:41:37 +00:00
|
|
|
//#define PMS_MODEL_PMS5003T // Enable support for PMSx003T models that report temperature and humidity (needs the USE_PMS5003 above)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
|
|
|
|
|
//#define USE_HPMA // Add support for Honeywell HPMA115S0 particle concentration sensor
|
|
|
|
|
//#define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
|
2022-12-14 11:18:49 +00:00
|
|
|
//#define USE_ME007 // Add support for ME007 ultrasonic devices (+1k5 code)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_DYP // Add support for DYP ME-007 ultrasonic distance sensor, serial port version (+0k5 code)
|
2022-11-19 13:59:36 +00:00
|
|
|
#define USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+2k code)
|
2022-07-20 09:41:02 +01:00
|
|
|
//#define USE_MODBUS_BRIDGE // Add support for software Modbus Bridge (+3k code)
|
2021-06-16 16:45:44 +01:00
|
|
|
//#define USE_MP3_PLAYER // Use of the DFPlayer Mini MP3 Player RB-DFR-562 commands: play, volume and stop
|
|
|
|
|
//#define USE_AZ7798 // Add support for AZ-Instrument 7798 CO2 datalogger
|
|
|
|
|
//#define USE_PN532_HSU // Add support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
|
|
|
|
|
//#define USE_ZIGBEE // Enable serial communication with Zigbee CC2530 flashed with ZNP
|
|
|
|
|
//#define USE_RDM6300 // Add support for RDM6300 125kHz RFID Reader (+0k8)
|
|
|
|
|
|
|
|
|
|
#define USE_IR_REMOTE
|
|
|
|
|
|
2022-12-14 10:26:09 +00:00
|
|
|
#define USE_ETHERNET // Add support for ethernet (+20k code
|
|
|
|
|
|
2021-06-16 16:45:44 +01:00
|
|
|
#endif // FIRMWARE_TASMOTA_LVGL *******************************************************************
|
|
|
|
|
|
2022-06-02 19:44:00 +01:00
|
|
|
/*********************************************************************************************\
|
|
|
|
|
* [tasmota32-zbbrdgpro]
|
|
|
|
|
* Provide an image for Sonoff Zigbee Bridge Pro
|
|
|
|
|
\*********************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef FIRMWARE_ZBBRDGPRO
|
|
|
|
|
|
2023-02-22 11:05:04 +00:00
|
|
|
#ifndef CODE_IMAGE_STR
|
|
|
|
|
#define CODE_IMAGE_STR "zbbrdgpro"
|
|
|
|
|
#endif
|
2022-06-02 19:44:00 +01:00
|
|
|
|
|
|
|
|
#undef MODULE
|
|
|
|
|
#define MODULE WEMOS // [Module] Select default module from tasmota_template.h
|
|
|
|
|
#undef FALLBACK_MODULE
|
|
|
|
|
#define FALLBACK_MODULE WEMOS // [Module2] Select default module on fast reboot where USER_MODULE is user template
|
|
|
|
|
|
2022-09-02 14:26:44 +01:00
|
|
|
#define USE_INFLUXDB // Enable influxdb support (+5k code)
|
|
|
|
|
|
2022-06-02 19:44:00 +01:00
|
|
|
#undef USE_DOMOTICZ
|
|
|
|
|
#undef USE_HOME_ASSISTANT
|
|
|
|
|
#define USE_TASMOTA_DISCOVERY // Enable Tasmota Discovery support (+2k code)
|
|
|
|
|
|
|
|
|
|
#define USE_WEBCLIENT_HTTPS
|
|
|
|
|
|
|
|
|
|
#define USE_ZIGBEE
|
|
|
|
|
#define USE_TCP_BRIDGE
|
|
|
|
|
|
|
|
|
|
#define USE_ENHANCED_GUI_WIFI_SCAN
|
|
|
|
|
|
|
|
|
|
#undef USE_ARMTRONIX_DIMMERS // Disable support for Armtronix Dimmers (+1k4 code)
|
|
|
|
|
#undef USE_PS_16_DZ // Disable support for PS-16-DZ Dimmer (+2k code)
|
|
|
|
|
#undef USE_SONOFF_IFAN // Disable support for Sonoff iFan02 and iFan03 (+2k code)
|
|
|
|
|
//#define USE_BUZZER // Add support for a buzzer (+0k6 code)
|
|
|
|
|
#undef USE_ARILUX_RF // Disable support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
|
|
|
|
//#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
|
|
|
|
|
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
|
|
|
|
|
#undef USE_KEELOQ // Disable support for Jarolift rollers by Keeloq algorithm (+4k5 code)
|
|
|
|
|
#undef USE_SONOFF_D1 // Disable support for Sonoff D1 Dimmer (+0k7 code)
|
|
|
|
|
#undef USE_SHELLY_DIMMER // Disable support for Shelly Dimmer (+3k code)
|
|
|
|
|
|
|
|
|
|
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
|
|
|
|
#define USE_SPI // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)
|
|
|
|
|
|
|
|
|
|
#define USE_ETHERNET // Add support for ethernet (+20k code)
|
|
|
|
|
|
|
|
|
|
//#ifndef USE_KNX
|
|
|
|
|
//#define USE_KNX // Enable KNX IP Protocol Support (+23k code, +3k3 mem)
|
|
|
|
|
//#endif
|
|
|
|
|
|
|
|
|
|
#endif // FIRMWARE_ZBBRDGPRO
|
|
|
|
|
|
|
|
|
|
/*********************************************************************************************\
|
|
|
|
|
* [tasmota32-nspanel]
|
|
|
|
|
* Provide an image for ths Sonoff NsPanel
|
|
|
|
|
\*********************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef FIRMWARE_NSPANEL
|
|
|
|
|
|
2023-02-22 11:05:04 +00:00
|
|
|
#ifndef CODE_IMAGE_STR
|
|
|
|
|
#define CODE_IMAGE_STR "nspanel"
|
|
|
|
|
#endif
|
2022-06-02 19:44:00 +01:00
|
|
|
|
|
|
|
|
#undef MODULE
|
|
|
|
|
#define MODULE WEMOS // [Module] Select default module from tasmota_template.h
|
|
|
|
|
#undef FALLBACK_MODULE
|
|
|
|
|
#define FALLBACK_MODULE WEMOS // [Module2] Select default module on fast reboot where USER_MODULE is user template
|
|
|
|
|
|
|
|
|
|
#define FIRMWARE_TASMOTA32
|
|
|
|
|
|
|
|
|
|
#endif // FIRMWARE_NSPANEL
|
2021-06-16 16:45:44 +01:00
|
|
|
|
2021-03-13 14:48:38 +00:00
|
|
|
/*********************************************************************************************\
|
|
|
|
|
* [tasmota32.bin]
|
|
|
|
|
* Provide an image which includes KNX and Sensors
|
|
|
|
|
\*********************************************************************************************/
|
|
|
|
|
|
2021-03-14 10:21:55 +00:00
|
|
|
#ifdef FIRMWARE_TASMOTA32
|
2021-03-13 14:48:38 +00:00
|
|
|
|
2023-02-22 11:05:04 +00:00
|
|
|
#ifndef CODE_IMAGE_STR
|
|
|
|
|
#define CODE_IMAGE_STR "tasmota32"
|
|
|
|
|
#endif
|
|
|
|
|
|
2021-10-03 14:21:25 +01:00
|
|
|
#define USE_INFLUXDB // Enable influxdb support (+5k code)
|
|
|
|
|
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_ENHANCED_GUI_WIFI_SCAN
|
|
|
|
|
|
2021-04-15 15:08:39 +01:00
|
|
|
#define USE_SDCARD
|
|
|
|
|
|
2021-03-13 14:48:38 +00:00
|
|
|
#define ROTARY_V1 // Add support for Rotary Encoder as used in MI Desk Lamp
|
|
|
|
|
|
|
|
|
|
#define USE_TUYA_MCU // Add support for Tuya Serial MCU
|
|
|
|
|
#ifndef TUYA_DIMMER_ID
|
|
|
|
|
#define TUYA_DIMMER_ID 0 // Default dimmer Id
|
|
|
|
|
#endif
|
|
|
|
|
#undef USE_ARMTRONIX_DIMMERS // Disable support for Armtronix Dimmers (+1k4 code)
|
|
|
|
|
//#undef USE_PS_16_DZ // Disable support for PS-16-DZ Dimmer (+2k code)
|
|
|
|
|
#undef USE_SONOFF_IFAN // Disable support for Sonoff iFan02 and iFan03 (+2k code)
|
|
|
|
|
#define USE_BUZZER // Add support for a buzzer (+0k6 code)
|
|
|
|
|
//#undef USE_ARILUX_RF // Disable support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
|
|
|
|
#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
|
|
|
|
|
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
|
|
|
|
|
//#define USE_HOTPLUG // Add support for sensor HotPlug
|
|
|
|
|
//#undef USE_DEVICE_GROUPS // Disable support for device groups (+5k6 code)
|
2022-01-07 15:17:53 +00:00
|
|
|
//#undef USE_PWM_DIMMER // Disable support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
#undef USE_KEELOQ // Disable support for Jarolift rollers by Keeloq algorithm (+4k5 code)
|
|
|
|
|
#undef USE_SONOFF_D1 // Disable support for Sonoff D1 Dimmer (+0k7 code)
|
|
|
|
|
#undef USE_SHELLY_DIMMER // Disable support for Shelly Dimmer (+3k code)
|
|
|
|
|
|
|
|
|
|
#define USE_LIGHT_PALETTE // Add support for color palette (+0k9 code)
|
2022-11-16 17:41:07 +00:00
|
|
|
#define USE_LIGHT_ARTNET // Add support for DMX/ArtNet via UDP on port 6454 (+3.5k code)
|
2021-03-13 14:48:38 +00:00
|
|
|
|
|
|
|
|
#define USE_DS18x20 // Add support for DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
|
|
|
|
|
|
|
|
|
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
|
|
|
|
|
#define USE_SHT // [I2cDriver8] Enable SHT1X sensor (+1k4 code)
|
|
|
|
|
#define USE_HTU // [I2cDriver9] Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
|
|
|
|
|
#define USE_BMP // [I2cDriver10] Enable BMP085/BMP180/BMP280/BME280 sensors (I2C addresses 0x76 and 0x77) (+4k4 code)
|
2022-01-19 16:05:39 +00:00
|
|
|
#define USE_BME68X // Enable support for BME680/BME688 sensor using Bosch BME68x library (+6k9 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_BH1750 // [I2cDriver11] Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
|
|
|
|
|
#define USE_VEML6070 // [I2cDriver12] Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+1k5 code)
|
|
|
|
|
//#define USE_VEML6075 // [I2cDriver49] Enable VEML6075 UVA/UVB/UVINDEX Sensor (I2C address 0x10) (+2k1 code)
|
|
|
|
|
//#define USE_VEML7700 // [I2cDriver50] Enable VEML7700 Ambient Light sensor (I2C addresses 0x10) (+4k5 code)
|
|
|
|
|
#define USE_ADS1115 // [I2cDriver13] Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
|
|
|
|
|
#define USE_INA219 // [I2cDriver14] Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
|
|
|
|
|
//#define USE_INA226 // [I2cDriver35] Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
|
|
|
|
|
#define USE_SHT3X // [I2cDriver15] Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
|
2021-04-13 17:36:23 +01:00
|
|
|
//#define USE_TSL2561 // [I2cDriver16] Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_TSL2591 // [I2cDriver40] Enable TSL2591 sensor (I2C address 0x29) using library Adafruit_TSL2591 (+1k6 code)
|
|
|
|
|
#define USE_MGS // [I2cDriver17] Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
|
|
|
|
|
#define USE_SGP30 // [I2cDriver18] Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
|
2022-08-25 20:51:51 +01:00
|
|
|
#define USE_SGP40 // [I2cDriver69] Enable SGP40 sensor (I2C address 0x59) (+1k4 code)
|
2023-01-29 07:06:25 +00:00
|
|
|
#define USE_SEN5X // [I2cDriver76] Enable SEN5X sensor (I2C address 0x69) (+3k code)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_SI1145 // [I2cDriver19] Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
|
|
|
|
|
#define USE_LM75AD // [I2cDriver20] Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
|
|
|
|
|
//#define USE_APDS9960 // [I2cDriver21] Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
|
|
|
|
|
//#define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
2023-03-02 10:24:54 +00:00
|
|
|
#define USE_MCP23XXX_DRV // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
|
|
|
|
//#define USE_MPR121 // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
2021-03-31 14:04:24 +01:00
|
|
|
//#define USE_CCS811 // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
|
|
|
|
#define USE_CCS811_V2 // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)
|
2021-06-11 12:27:34 +01:00
|
|
|
#define USE_MPU_ACCEL // [I2cDriver58] Enable MPU6886, MPU9250 6-axis MotionTracking sensor (I2C address 0x68)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_MPU6050 // [I2cDriver25] Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+3K3 of code and 188 Bytes of RAM)
|
|
|
|
|
//#define USE_MGC3130 // [I2cDriver27] Enable MGC3130 Electric Field Effect Sensor (I2C address 0x42) (+2k7 code, 0k3 mem)
|
|
|
|
|
//#define USE_MAX44009 // [I2cDriver28] Enable MAX44009 Ambient Light sensor (I2C addresses 0x4A and 0x4B) (+0k8 code)
|
|
|
|
|
#define USE_SCD30 // [I2cDriver29] Enable Sensiron SCd30 CO2 sensor (I2C address 0x61) (+3k3 code)
|
2021-09-16 07:08:50 +01:00
|
|
|
#define USE_SCD40 // [I2cDriver62] Enable Sensiron SCd40 CO2 sensor (I2C address 0x62) (+3k5 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_SPS30 // [I2cDriver30] Enable Sensiron SPS30 particle sensor (I2C address 0x69) (+1.7 code)
|
2023-03-02 10:24:54 +00:00
|
|
|
#define USE_ADE7880 // [I2cDriver65] Enable ADE7880 Energy monitor as used on Shelly 3EM (I2C address 0x38) (+3k8)
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_ADE7953 // [I2cDriver7] Enable ADE7953 Energy monitor as used on Shelly 2.5 (I2C address 0x38) (+1k5)
|
2021-04-13 17:36:23 +01:00
|
|
|
#define USE_VL53L0X // [I2cDriver31] Enable VL53L0x time of flight sensor (I2C address 0x29) (+4k code)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_VL53L1X // [I2cDriver54] Enable VL53L1X time of flight sensor (I2C address 0x29) using Pololu VL53L1X library (+2k9 code)
|
|
|
|
|
//#define USE_TOF10120 // [I2cDriver57] Enable TOF10120 time of flight sensor (I2C address 0x52) (+0k6 code)
|
|
|
|
|
//#define USE_MLX90614 // [I2cDriver32] Enable MLX90614 ir temp sensor (I2C address 0x5a) (+0.6k code)
|
|
|
|
|
//#define USE_CHIRP // [I2cDriver33] Enable CHIRP soil moisture sensor (variable I2C address, default 0x20)
|
|
|
|
|
//#define USE_PAJ7620 // [I2cDriver34] Enable PAJ7620 gesture sensor (I2C address 0x73) (+2.5k code)
|
|
|
|
|
//#define USE_PCF8574 // [I2cDriver2] Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x26 and 0x39 - 0x3F) (+1k9 code)
|
|
|
|
|
#define USE_HIH6 // [I2cDriver36] Enable Honeywell HIH Humidity and Temperature sensor (I2C address 0x27) (+0k6)
|
|
|
|
|
#define USE_DHT12 // [I2cDriver41] Enable DHT12 humidity and temperature sensor (I2C address 0x5C) (+0k7 code)
|
|
|
|
|
#define USE_DS1624 // [I2cDriver42] Enable DS1624, DS1621 temperature sensor (I2C addresses 0x48 - 0x4F) (+1k2 code)
|
|
|
|
|
//#define USE_AHT1x // [I2cDriver43] Enable AHT10/15 humidity and temperature sensor (I2C address 0x38, 0x39) (+0k8 code)
|
2021-09-20 14:30:12 +01:00
|
|
|
//#define USE_AHT2x // [I2cDriver43] Enable AHT20 instead of AHT1x humidity and temperature sensor (I2C address 0x38) (+0k8 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_WEMOS_MOTOR_V1 // [I2cDriver44] Enable Wemos motor driver V1 (I2C addresses 0x2D - 0x30) (+0k7 code)
|
|
|
|
|
#define WEMOS_MOTOR_V1_ADDR 0x30 // Default I2C address 0x30
|
|
|
|
|
#define WEMOS_MOTOR_V1_FREQ 1000 // Default frequency
|
|
|
|
|
//#define USE_HDC1080 // [I2cDriver45] Enable HDC1080 temperature/humidity sensor (I2C address 0x40) (+1k5 code)
|
|
|
|
|
#define USE_IAQ // [I2cDriver46] Enable iAQ-core air quality sensor (I2C address 0x5a) (+0k6 code)
|
|
|
|
|
#define USE_AS3935 // [I2cDriver48] Enable AS3935 Franklin Lightning Sensor (I2C address 0x03) (+5k4 code)
|
|
|
|
|
//#define USE_MCP9808 // [I2cDriver51] Enable MCP9808 temperature sensor (I2C addresses 0x18 - 0x1F) (+0k9 code)
|
|
|
|
|
//#define USE_HP303B // [I2cDriver52] Enable HP303B temperature and pressure sensor (I2C address 0x76 or 0x77) (+6k2 code)
|
|
|
|
|
//#define USE_MLX90640 // [I2cDriver53] Enable MLX90640 IR array temperature sensor (I2C address 0x33) (+20k code)
|
|
|
|
|
//#define USE_EZOPH // [I2cDriver55] Enable support for EZO's pH sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOORP // [I2cDriver55] Enable support for EZO's ORP sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZORTD // [I2cDriver55] Enable support for EZO's RTD sensor (+0k2 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOHUM // [I2cDriver55] Enable support for EZO's HUM sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOEC // [I2cDriver55] Enable support for EZO's EC sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOCO2 // [I2cDriver55] Enable support for EZO's CO2 sensor (+0k2 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOO2 // [I2cDriver55] Enable support for EZO's O2 sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOPRS // [I2cDriver55] Enable support for EZO's PRS sensor (+0k7 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOFLO // [I2cDriver55] Enable support for EZO's FLO sensor (+0k4 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZODO // [I2cDriver55] Enable support for EZO's DO sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZORGB // [I2cDriver55] Enable support for EZO's RGB sensor (+0k5 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_EZOPMP // [I2cDriver55] Enable support for EZO's PMP sensor (+0k3 code) - Shared EZO code required for any EZO device (+1k2 code)
|
|
|
|
|
//#define USE_SEESAW_SOIL // [I2cDriver56] Enable Capacitice Soil Moisture & Temperature Sensor (I2C addresses 0x36 - 0x39) (+1k3 code)
|
2022-03-17 15:03:40 +00:00
|
|
|
//#define USE_DS3502 // [I2CDriver67] Enable DS3502 digital potentiometer (I2C address 0x28 - 0x2B) (+0k4 code)
|
2022-06-04 13:15:16 +01:00
|
|
|
//#define USE_HYT // [I2CDriver68] Enable HYTxxx temperature and humidity sensor (I2C address 0x28) (+0k5 code)
|
2022-09-02 12:13:47 +01:00
|
|
|
//#define USE_LUXV30B // [I2CDriver70] Enable RFRobot SEN0390 LuxV30b ambient light sensor (I2C address 0x4A) (+0k5 code)
|
2023-03-20 09:21:16 +00:00
|
|
|
//#define USE_PMSA003I // [I2cDriver78] Enable PMSA003I Air Quality Sensor (I2C address 0x12) (+1k8 code)
|
2020-05-12 14:42:16 +01:00
|
|
|
|
2022-04-16 16:43:10 +01:00
|
|
|
//#define USE_RTC_CHIPS // Enable RTC chip support and NTP server - Select only one
|
|
|
|
|
// #define USE_DS3231 // [I2cDriver26] Enable DS3231 RTC (I2C address 0x68) (+1k2 code)
|
|
|
|
|
// #define USE_BM8563 // [I2cDriver59] Enable BM8563 RTC - found in M5Stack - support both I2C buses on ESP32 (I2C address 0x51) (+2.5k code)
|
|
|
|
|
// #define USE_PCF85363 // [I2cDriver66] Enable PCF85363 RTC - found Shelly 3EM (I2C address 0x51) (+0k7 code)
|
|
|
|
|
|
2022-02-20 11:52:02 +00:00
|
|
|
#define USE_SPI // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_RC522 // Add support for MFRC522 13.56Mhz Rfid reader (+6k code)
|
2022-09-29 13:31:40 +01:00
|
|
|
//#define USE_MCP2515 // Add support for can bus using MCP2515 (+7k code)
|
|
|
|
|
//#define USE_CANSNIFFER // Add support for can bus sniffer using MCP2515 (+5k code)
|
2023-03-02 10:24:54 +00:00
|
|
|
#define USE_MCP23XXX_DRV // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
|
2022-10-24 10:32:10 +01:00
|
|
|
#define USE_SHELLY_PRO // Add support for Shelly Pro
|
2021-03-13 14:48:38 +00:00
|
|
|
|
|
|
|
|
#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
|
|
|
|
#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
2022-01-27 13:42:58 +00:00
|
|
|
#define USE_CM110x // Add support for CM110x CO2 sensors (+2k7 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
#ifndef CO2_LOW
|
|
|
|
|
#define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef CO2_HIGH
|
|
|
|
|
#define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
|
|
|
|
|
#endif
|
|
|
|
|
#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
|
|
|
|
|
//#define PMS_MODEL_PMS3003 // Enable support of PMS3003 instead of PMS5003/PMS7003 (needs the USE_PMS5003 above)
|
2022-10-31 20:41:37 +00:00
|
|
|
//#define PMS_MODEL_PMS5003T // Enable support for PMSx003T models that report temperature and humidity (needs the USE_PMS5003 above)
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
|
|
|
|
|
#define USE_HPMA // Add support for Honeywell HPMA115S0 particle concentration sensor
|
|
|
|
|
#define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
|
2022-12-14 11:18:49 +00:00
|
|
|
//#define USE_ME007 // Add support for ME007 ultrasonic devices (+1k5 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
//#define USE_DYP // Add support for DYP ME-007 ultrasonic distance sensor, serial port version (+0k5 code)
|
2022-11-19 13:59:36 +00:00
|
|
|
#define USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+2k code)
|
2022-07-20 09:41:02 +01:00
|
|
|
#define USE_MODBUS_BRIDGE // Add support for software Modbus Bridge (+3k code)
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_MP3_PLAYER // Use of the DFPlayer Mini MP3 Player RB-DFR-562 commands: play, volume and stop
|
|
|
|
|
//#define USE_AZ7798 // Add support for AZ-Instrument 7798 CO2 datalogger
|
|
|
|
|
#define USE_PN532_HSU // Add support for PN532 using HSU (Serial) interface (+1k8 code, 140 bytes mem)
|
|
|
|
|
//#define USE_ZIGBEE // Enable serial communication with Zigbee CC2530 flashed with ZNP
|
|
|
|
|
#define USE_RDM6300 // Add support for RDM6300 125kHz RFID Reader (+0k8)
|
|
|
|
|
#define USE_IBEACON // Add support for bluetooth LE passive scan of ibeacon devices (uses HM17 module)
|
|
|
|
|
//#define USE_GPS // Add support for GPS and NTP Server for becoming Stratus 1 Time Source (+ 3.1kb flash, +132 bytes RAM)
|
|
|
|
|
|
|
|
|
|
//#define USE_BLE_ESP32 // (ESP32 only) Add support for native BLE on ESP32 - use new driver
|
|
|
|
|
//#define USE_MI_ESP32 // (ESP32 only) Add support for ESP32 as a BLE-bridge (+9k2 mem, +292k flash)
|
|
|
|
|
|
|
|
|
|
#define USE_HRXL // Add support for MaxBotix HRXL-MaxSonar ultrasonic range finders (+0k7)
|
|
|
|
|
//#define USE_TASMOTA_CLIENT // Add support for Arduino Uno/Pro Mini via serial interface including flashing (+2k3 code, 44 mem)
|
|
|
|
|
//#define USE_OPENTHERM // Add support for OpenTherm (+15k code)
|
|
|
|
|
//#define USE_MIEL_HVAC // Add support for Mitsubishi Electric HVAC serial interface (+5k code)
|
|
|
|
|
//#define USE_PROJECTOR_CTRL // Add support for LCD/DLP Projector serial control interface (+2k code)
|
|
|
|
|
// #define USE_PROJECTOR_CTRL_NEC // Use codes for NEC
|
|
|
|
|
// #define USE_PROJECTOR_CTRL_OPTOMA // Use codes for OPTOMA
|
|
|
|
|
//#define USE_AS608 // Add support for AS608 optical and R503 capacitive fingerprint sensor (+3k4 code)
|
2021-03-21 18:25:58 +00:00
|
|
|
//#define USE_TFMINIPLUS // Add support for TFmini Plus (TFmini, TFmini-S) LiDAR modules via UART interface
|
2021-08-25 16:25:11 +01:00
|
|
|
//#define USE_HRG15 // Add support for Hydreon RG-15 Solid State Rain sensor (+1k5 code)
|
2021-03-13 14:48:38 +00:00
|
|
|
|
|
|
|
|
#define USE_ENERGY_SENSOR // Add energy sensors (-14k code)
|
|
|
|
|
#define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
|
|
|
|
#define USE_PZEM_AC // Add support for PZEM014,016 Energy monitor (+1k1 code)
|
|
|
|
|
#define USE_PZEM_DC // Add support for PZEM003,017 Energy monitor (+1k1 code)
|
|
|
|
|
#define USE_MCP39F501 // Add support for MCP39F501 Energy monitor as used in Shelly 2 (+3k1 code)
|
|
|
|
|
#define USE_SDM72 // Add support for Eastron SDM72-Modbus energy monitor (+0k3 code)
|
|
|
|
|
#define USE_SDM120 // Add support for Eastron SDM120-Modbus energy monitor (+1k1 code)
|
2021-10-23 12:54:03 +01:00
|
|
|
#define USE_SDM230 // Add support for Eastron SDM230-Modbus energy monitor (+?? code)
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_SDM630 // Add support for Eastron SDM630-Modbus energy monitor (+0k6 code)
|
|
|
|
|
#define USE_DDS2382 // Add support for Hiking DDS2382 Modbus energy monitor (+0k6 code)
|
|
|
|
|
#define USE_DDSU666 // Add support for Chint DDSU666 Modbus energy monitor (+0k6 code)
|
|
|
|
|
//#define USE_SOLAX_X1 // Add support for Solax X1 series Modbus log info (+3k1 code)
|
|
|
|
|
//#define USE_LE01MR // Add support for F&F LE-01MR modbus energy meter (+2k code)
|
|
|
|
|
//#define USE_TELEINFO // Add support for French Energy Provider metering telemetry (+5k2 code, +168 RAM + SmartMeter LinkedList Values RAM)
|
2023-01-02 10:38:08 +00:00
|
|
|
#define USE_WE517 // Add support for Orno WE517-Modbus energy monitor (+1k code)
|
2022-02-20 11:52:02 +00:00
|
|
|
#define USE_SONOFF_SPM // Add support for ESP32 based Sonoff Smart Stackable Power Meter (+11k code)
|
2023-01-02 10:38:08 +00:00
|
|
|
#define USE_MODBUS_ENERGY // Add support for generic modbus energy monitor using a user file in rule space (+5k code)
|
2023-02-02 18:09:24 +00:00
|
|
|
//#define USE_BIOPDU // Add support for BioPDU 625x12 6-channel energy monitor
|
2021-03-13 14:48:38 +00:00
|
|
|
|
|
|
|
|
#define USE_DHT // Add support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor
|
|
|
|
|
#define USE_MAX31855 // Add support for MAX31855 K-Type thermocouple sensor using softSPI
|
|
|
|
|
//#define USE_MAX31865 // Add support for MAX31865 RTD sensors using softSPI
|
|
|
|
|
#define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
|
|
|
|
|
#define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
|
|
|
|
|
#define USE_LMT01 // Add support for TI LMT01 temperature sensor, count pulses on single GPIO (+0k5 code)
|
|
|
|
|
//#define USE_WIEGAND // Add support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) (+1k7 code)
|
2022-10-21 12:40:01 +01:00
|
|
|
#define USE_SHIFT595 // Add support for 74xx595 8-bit shift registers (+0k7 code)
|
|
|
|
|
// #define SHIFT595_INVERT_OUTPUTS false // [SetOption133] Don't invert outputs of 74x595 shift register
|
|
|
|
|
// #define SHIFT595_DEVICE_COUNT 1 // [Shift595DeviceCount] Set the number of connected 74x595 shift registers
|
2021-03-13 14:48:38 +00:00
|
|
|
#define USE_TM1638 // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
|
|
|
|
|
#define USE_HX711 // Add support for HX711 load cell (+1k5 code)
|
|
|
|
|
//#define USE_HX711_GUI // Add optional web GUI to HX711 as scale (+1k8 code)
|
|
|
|
|
//#define USE_TX20_WIND_SENSOR // Add support for La Crosse TX20 anemometer (+2k6/0k8 code)
|
|
|
|
|
//#define USE_TX23_WIND_SENSOR // Add support for La Crosse TX23 anemometer (+2k7/1k code)
|
|
|
|
|
//#define USE_WINDMETER // Add support for analog anemometer (+2k2 code)
|
|
|
|
|
#define USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+2k7 code, 460 iram)
|
|
|
|
|
#define USE_RF_SENSOR // Add support for RF sensor receiver (434MHz or 868MHz) (+0k8 code)
|
|
|
|
|
// #define USE_THEO_V2 // Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver (+1k4 code)
|
|
|
|
|
#define USE_ALECTO_V2 // Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver (+1k7 code)
|
|
|
|
|
#define USE_HRE // Add support for Badger HR-E Water Meter (+1k4 code)
|
|
|
|
|
//#define USE_A4988_STEPPER // Add support for A4988/DRV8825 stepper-motor-driver-circuit (+10k5 code)
|
|
|
|
|
//#define USE_THERMOSTAT // Add support for Thermostat
|
2022-11-06 15:14:03 +00:00
|
|
|
#define USE_BP1658CJ // Add support for BP1658CJ 5 channel led controller as used in Orein OS0100411267 Bulb
|
2022-02-20 13:11:12 +00:00
|
|
|
#define USE_ETHERNET // Add support for ethernet (+20k code)
|
2022-07-06 15:58:27 +01:00
|
|
|
#define USE_DISPLAY_TM1621_SONOFF // Add support for TM1621 display driver used by Sonoff POWR3xxD and THR3xxD
|
2022-02-20 11:52:02 +00:00
|
|
|
|
2021-03-13 14:48:38 +00:00
|
|
|
#ifndef USE_KNX
|
|
|
|
|
#define USE_KNX // Enable KNX IP Protocol Support (+23k code, +3k3 mem)
|
|
|
|
|
#endif
|
|
|
|
|
|
2021-03-14 10:21:55 +00:00
|
|
|
#endif // FIRMWARE_TASMOTA32
|
2021-03-13 14:48:38 +00:00
|
|
|
|
|
|
|
|
#endif // ESP32
|
2020-05-12 14:42:16 +01:00
|
|
|
#endif // _TASMOTA_CONFIGURATIONS_ESP32_H_
|
