Tasmota/tasmota/user_config_override_sample.h

92 lines
3.4 KiB
C
Raw Normal View History

/*
user_config_override.h - user configuration overrides my_user_config.h for Tasmota
2021-01-01 12:44:04 +00:00
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _USER_CONFIG_OVERRIDE_H_
#define _USER_CONFIG_OVERRIDE_H_
2019-01-17 14:29:41 +00:00
// force the compiler to show a warning to confirm that this file is included
2018-04-05 15:13:17 +01:00
#warning **** user_config_override.h: Using Settings from this File ****
/*****************************************************************************************************\
* USAGE:
* To modify the stock configuration without changing the my_user_config.h file:
* (1) copy this file to "user_config_override.h" (It will be ignored by Git)
* (2) define your own settings below
2020-10-16 14:49:30 +01:00
*
******************************************************************************************************
* ATTENTION:
2018-04-05 15:13:17 +01:00
* - Changes to SECTION1 PARAMETER defines will only override flash settings if you change define CFG_HOLDER.
* - Expect compiler warnings when no ifdef/undef/endif sequence is used.
* - You still need to update my_user_config.h for major define USE_MQTT_TLS.
2018-04-05 15:13:17 +01:00
* - All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.
\*****************************************************************************************************/
/*
Examples :
2018-04-05 15:13:17 +01:00
// -- Master parameter control --------------------
#undef CFG_HOLDER
#define CFG_HOLDER 4617 // [Reset 1] Change this value to load SECTION1 configuration parameters to flash
2018-04-05 15:13:17 +01:00
// -- Setup your own Wifi settings ---------------
#undef STA_SSID1
2018-04-05 15:13:17 +01:00
#define STA_SSID1 "YourSSID" // [Ssid1] Wifi SSID
#undef STA_PASS1
2018-04-05 15:13:17 +01:00
#define STA_PASS1 "YourWifiPassword" // [Password1] Wifi password
2018-04-05 15:13:17 +01:00
// -- Setup your own MQTT settings ---------------
#undef MQTT_HOST
2018-04-05 15:13:17 +01:00
#define MQTT_HOST "your-mqtt-server.com" // [MqttHost]
#undef MQTT_PORT
2018-04-05 15:13:17 +01:00
#define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT)
#undef MQTT_USER
2018-04-05 15:13:17 +01:00
#define MQTT_USER "YourMqttUser" // [MqttUser] Optional user
#undef MQTT_PASS
2018-04-05 15:13:17 +01:00
#define MQTT_PASS "YourMqttPass" // [MqttPassword] Optional password
// You might even pass some parameters from the command line ----------------------------
2018-04-05 15:13:17 +01:00
// Ie: export PLATFORMIO_BUILD_FLAGS='-DUSE_CONFIG_OVERRIDE -DMY_IP="192.168.1.99" -DMY_GW="192.168.1.1" -DMY_DNS="192.168.1.1"'
#ifdef MY_IP
#undef WIFI_IP_ADDRESS
#define WIFI_IP_ADDRESS MY_IP // Set to 0.0.0.0 for using DHCP or enter a static IP address
#endif
#ifdef MY_GW
#undef WIFI_GATEWAY
#define WIFI_GATEWAY MY_GW // if not using DHCP set Gateway IP address
#endif
#ifdef MY_DNS
#undef WIFI_DNS
#define WIFI_DNS MY_DNS // If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)
#endif
*/
2019-01-17 14:29:41 +00:00
#endif // _USER_CONFIG_OVERRIDE_H_