2019-10-27 11:04:08 +00:00
< img src = "https://github.com/arendst/Tasmota/blob/master/tools/logo/TASMOTA_FullLogo_Vector.svg" alt = "Logo" align = "right" height = "76" / >
2019-05-22 13:56:47 +01:00
# RELEASE NOTES
2018-08-28 16:34:51 +01:00
## Migration Information
2019-11-13 09:17:52 +00:00
2019-11-22 21:44:38 +00:00
See [migration path ](https://tasmota.github.io/docs/#/Upgrading?id=migration-path ) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
2018-08-28 16:34:51 +01:00
1. Migrate to **Sonoff-Tasmota 3.9.x**
2. Migrate to **Sonoff-Tasmota 4.x**
3. Migrate to **Sonoff-Tasmota 5.14**
2019-11-17 14:38:22 +00:00
4. Migrate to **Sonoff-Tasmota 6.x**
2019-10-27 11:18:47 +00:00
5. Migrate to **Tasmota 7.x**
2019-12-23 16:41:36 +00:00
2019-12-23 13:05:26 +00:00
--- Major change in parameter storage layout ---
2019-12-23 16:41:36 +00:00
2019-12-23 13:05:26 +00:00
6. Migrate to **Tasmota 8.1**
7. Migrate to **Tasmota 8.x**
2019-12-20 15:22:49 +00:00
2019-12-25 11:59:21 +00:00
While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v8.1.0 Doris** the Settings are re-allocated in such a way that fallback is only allowed and possible to release **v7.2.0 Constance** . Once at v7.2.0 you're on your own when downgrading even further.
2019-10-19 13:55:12 +01:00
## Supported Core versions
2019-11-17 14:26:37 +00:00
This release will be supported from ESP8266/Arduino library Core version **2.6.1** due to reported security and stability issues on previous Core version.
2019-11-13 09:17:52 +00:00
Although it might still compile on previous Core versions all support will be removed in the near future.
2019-09-25 14:44:41 +01:00
2019-10-17 17:09:23 +01:00
## Support of TLS
2019-11-13 09:17:52 +00:00
2019-11-23 20:03:20 +00:00
To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read [full documentation ](https://tasmota.github.io/docs/#/integrations/AWS-IoT )
2019-03-19 14:37:21 +00:00
2019-10-22 15:34:25 +01:00
## Initial configuration tools
2019-11-13 09:17:52 +00:00
2019-10-22 15:34:25 +01:00
For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed.
2018-08-28 16:34:51 +01:00
2018-10-31 13:36:28 +00:00
## Provided Binary Downloads
2019-11-13 09:17:52 +00:00
2019-11-17 14:26:37 +00:00
The following binary downloads have been compiled with ESP8266/Arduino library core version **2.6.1** .
2018-10-31 13:36:28 +00:00
2019-10-27 11:44:37 +00:00
- **tasmota.bin** = The Tasmota version with sensors. **RECOMMENDED RELEASE BINARY**
- **tasmota-BG.bin** to **tasmota-TW.bin** = The Tasmota version in different languages.
2019-12-17 14:13:47 +00:00
- **tasmota-lite.bin** = The Lite version without most sensors.
2019-10-27 11:44:37 +00:00
- **tasmota-knx.bin** = The Knx version without some features but adds KNX support.
- **tasmota-sensors.bin** = The Sensors version adds more useful sensors.
- **tasmota-ir** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
- **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support.
- **tasmota-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation** .
2019-03-19 14:37:21 +00:00
2019-12-01 11:56:05 +00:00
[List ](MODULES.md ) of embedded modules.
2019-11-22 21:21:23 +00:00
[Complete list ](BUILDS.md ) of available feature and sensors.
2018-08-29 15:05:27 +01:00
2018-08-28 16:34:51 +01:00
## Changelog
2019-11-13 09:17:52 +00:00
2020-02-27 14:10:42 +00:00
### Version 8.1.0.10
2019-12-26 11:26:06 +00:00
2020-02-27 14:10:42 +00:00
- Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
2019-12-28 09:42:00 +00:00
- Change Lights: simplified gamma correction and 10 bits internal computation
2020-01-12 12:10:21 +00:00
- Change commands ``Prefix``, ``Ssid``, ``StateText``, ``NTPServer``, and ``FriendlyName`` displaying all items
2020-02-05 15:28:56 +00:00
- Change IRremoteESP8266 library updated to v2.7.3
2020-01-26 13:20:40 +00:00
- Change Zigbee command prefix from ``Zigbee*`` to ``Zb*``
2020-02-12 17:00:53 +00:00
- Change MQTT message size with additional 200 characters
2020-02-19 14:23:59 +00:00
- Change display of some date and time messages from "Wed Feb 19 10:45:12 2020" to "2020-02-19T10:45:12"
2019-12-27 14:13:40 +00:00
- Fix Sonoff Bridge, Sc, L1, iFan03 and CSE7766 serial interface to forced speed, config and disable logging
2019-12-26 11:26:06 +00:00
- Fix commands ``Display`` and ``Counter`` from overruling command processing (#7322)
2019-12-29 12:27:48 +00:00
- Fix ``White`` added to light status (#7142)
2020-01-01 16:17:10 +00:00
- Fix Improved fade linearity with gamma correction
2020-01-01 14:13:58 +00:00
- Fix LCD line and column positioning (#7387)
- Fix Display handling of hexadecimal escape characters (#7387)
2020-01-12 12:10:21 +00:00
- Fix ``WakeUp < x > `` ignores provided value (#7473)
2020-01-14 11:47:48 +00:00
- Fix exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496)
2020-01-17 14:38:03 +00:00
- Fix ``PowerDelta`` zero power detection (#7515)
2020-01-23 12:03:05 +00:00
- Fix ``RGBWWTable`` ignored (#7572)
2020-02-05 15:28:56 +00:00
- Fix PWM flickering at low levels (#7415)
2020-02-06 11:42:31 +00:00
- Fix Hass sensor discovery part 1/4 by Federico Leoni (#7582, #7548 )
2020-02-09 15:21:48 +00:00
- Fix MaxPower functionality (#7647)
2020-02-20 09:07:00 +00:00
- Fix relation between RSSI and signal strength
2019-12-28 15:33:51 +00:00
- Add command ``SetOption79 0/1`` to enable reset of counters at teleperiod time by Andre Thomas (#7355)
2020-01-06 13:52:04 +00:00
- Add command ``SetOption82 0/1`` to limit the CT range for Alexa to 200..380
2020-02-05 15:28:56 +00:00
- Add command ``SetOption84 1`` to send AWS IoT device shadow updates (alternative to retained)
2020-01-02 14:12:59 +00:00
- Add command ``ShutterButton < parameters > `` to control shutter(s) by to-scho (#7403)
2020-02-06 15:25:37 +00:00
- Add commands ``SwitchMode 8`` ToggleMulti, ``SwitchMode 9`` FollowMulti and ``SwitchMode 10`` FollowMultiInverted (#7522)
- Add commands ``SwitchMode 11`` PushHoldMulti and ``SwitchMode 12`` PushHoldInverted (#7603)
- Add command ``Buzzer -1`` for infinite mode and command ``Buzzer -2`` for following led mode (#7623)
2019-12-27 10:13:22 +00:00
- Add SerialConfig to ``Status 1``
- Add WifiPower to ``Status 5``
2019-12-28 09:42:00 +00:00
- Add support for DS1624, DS1621 Temperature sensor by Leonid Myravjev
2019-12-28 13:54:26 +00:00
- Add Zigbee attribute decoder for Xiaomi Aqara Cube
2019-12-30 15:42:53 +00:00
- Add support for ``AdcParam`` parameters to control ADC0 Current Transformer Apparent Power formula by Jodi Dillon (#7100)
2020-01-01 16:17:10 +00:00
- Add optional support for Prometheus using file xsns_91_prometheus.ino (#7216)
2020-01-02 15:58:20 +00:00
- Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394)
2020-01-02 20:41:16 +00:00
- Add support to BMP driver to enter reset state (sleep enable) when deep sleep is used in Tasmota
2020-01-06 13:52:04 +00:00
- Add support for gzipped binaries
2020-01-16 13:22:39 +00:00
- Add web page sliders when ``SetOption37 128`` is active allowing control of white(s)
2020-01-21 15:38:55 +00:00
- Add most SetOptions as defines to my_user_config.h
- Add SoftwareSerial to CSE7766 driver allowing different GPIOs (#7563)
2020-01-22 10:55:48 +00:00
- Add optional parameter < startcolor > to command ``Scheme < scheme > , < startcolor > `` to control initial start color
2020-01-23 12:03:05 +00:00
- Add rule trigger on one level deeper using syntax with two ``#`` like ``on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...``
2020-02-07 09:50:06 +00:00
- Add support for sensors DS18x20 and DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
- Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683)
2020-02-07 11:38:10 +00:00
- Add BootCount Reset Time as BCResetTime to ``Status 1``
2020-02-09 15:21:48 +00:00
- Add ``ZbZNPReceived``and ``ZbZCLReceived`` being published to MQTT when ``SetOption66 1``
2020-02-10 12:54:27 +00:00
- Add optional Wifi AccessPoint passphrase define WIFI_AP_PASSPHRASE in my_user_config.h (#7690)
2020-02-10 14:18:11 +00:00
- Add support for FiF LE-01MR energy meter by saper-2 (#7584)
2020-02-10 15:29:17 +00:00
- Add new DHT driver. The old driver can still be used using define USE_DHT_OLD (#7468)
2020-02-13 16:02:07 +00:00
- Add another new DHT driver based on ESPEasy. The old driver can still be used using define USE_DHT_OLD. The previous new driver can be used with define USE_DHT_V2 (#7717)
2020-02-22 11:18:20 +00:00
- Add initial support for Sensors AHT10 and AHT15 by Martin Wagner (#7596)
- Add support for Wemos Motor Shield V1 by Denis Sborets (#7764)
2020-02-25 11:13:49 +00:00
- Add Zigbee enhanced commands decoding, added ``ZbPing``
- Add commands ``SetOption85 0/1`` and ``DevGroupShare`` supporting UDP Group command using ``GroupTopic`` without MQTT by Paul Diem (#7790)
2020-02-27 10:16:38 +00:00
- Add support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM dimmer switches by Paul Diem (#7791)
2020-02-27 16:48:27 +00:00
- Add support for Jarolift rollers by Keeloq algorithm
