Tasmota/lib/Unishox-1.0-shadinger/python/unishox.py

522 lines
23 KiB
Python
Raw Normal View History

2020-05-17 15:28:09 +01:00
#!/usr/bin/env python
# -*- coding: utf-8 -*-
"""
Python Class for compressing short strings.
This class contains a highly modified and optimized version of Unishox
for Tasmota converted in C ported to Pyhton3.
It was basically developed to individually compress and decompress small strings
(see https://github.com/siara-cc/Unishox)
In general compression utilities such as zip, gzip do not compress short strings
well and often expand them. They also use lots of memory which makes them unusable
in constrained environments like Arduino.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
"""
class Unishox:
"""
This is a highly modified and optimized version of Unishox
for Tasmota, aimed at compressing `Rules` which are typically
short strings from 50 to 500 bytes.
@author Stephan Hadinger
@revised Norbert Richter
"""
# pylint: disable=bad-continuation,bad-whitespace,line-too-long
2020-05-25 22:29:54 +01:00
#cl_95 = [0x4000 + 3, 0x3F80 + 11, 0x3D80 + 11, 0x3C80 + 10, 0x3BE0 + 12, 0x3E80 + 10, 0x3F40 + 11, 0x3EC0 + 10, 0x3BA0 + 11, 0x3BC0 + 11, 0x3D60 + 11, 0x3B60 + 11, 0x3A80 + 10, 0x3AC0 + 10, 0x3A00 + 9, 0x3B00 + 10, 0x38C0 + 10, 0x3900 + 10, 0x3940 + 11, 0x3960 + 11, 0x3980 + 11, 0x39A0 + 11, 0x39C0 + 11, 0x39E0 + 12, 0x39F0 + 12, 0x3880 + 10, 0x3CC0 + 10, 0x3C00 + 9, 0x3D00 + 10, 0x3E00 + 9, 0x3F00 + 10, 0x3B40 + 11, 0x3BF0 + 12, 0x2B00 + 8, 0x21C0 + 11, 0x20C0 + 10, 0x2100 + 10, 0x2600 + 7, 0x2300 + 11, 0x21E0 + 12, 0x2140 + 11, 0x2D00 + 8, 0x2358 + 13, 0x2340 + 12, 0x2080 + 10, 0x21A0 + 11, 0x2E00 + 8, 0x2C00 + 8, 0x2180 + 11, 0x2350 + 13, 0x2F80 + 9, 0x2F00 + 9, 0x2A00 + 8, 0x2160 + 11, 0x2330 + 12, 0x21F0 + 12, 0x2360 + 13, 0x2320 + 12, 0x2368 + 13, 0x3DE0 + 12, 0x3FA0 + 11, 0x3DF0 + 12, 0x3D40 + 11, 0x3F60 + 11, 0x3FF0 + 12, 0xB000 + 4, 0x1C00 + 7, 0x0C00 + 6, 0x1000 + 6, 0x6000 + 3, 0x3000 + 7, 0x1E00 + 8, 0x1400 + 7, 0xD000 + 4, 0x3580 + 9, 0x3400 + 8, 0x0800 + 6, 0x1A00 + 7, 0xE000 + 4, 0xC000 + 4, 0x1800 + 7, 0x3500 + 9, 0xF800 + 5, 0xF000 + 5, 0xA000 + 4, 0x1600 + 7, 0x3300 + 8, 0x1F00 + 8, 0x3600 + 9, 0x3200 + 8, 0x3680 + 9, 0x3DA0 + 11, 0x3FC0 + 11, 0x3DC0 + 11, 0x3FE0 + 12]
cl_95 = [0x4000 + 3, 0x3F80 + 11, 0x3D80 + 11, 0x3C80 + 10, 0x3BE0 + 12, 0x3E80 + 10, 0x3F40 + 11, 0x3EC0 + 10, 0x3BA0 + 11, 0x3BC0 + 11, 0x3D60 + 11, 0x3B60 + 11, 0x3A80 + 10, 0x3AC0 + 10, 0x3A00 + 9, 0x3B00 + 10, 0x38C0 + 10, 0x3900 + 10, 0x3940 + 11, 0x3960 + 11, 0x3980 + 11, 0x39A0 + 11, 0x39C0 + 11, 0x39E0 + 12, 0x39F0 + 12, 0x3880 + 10, 0x3CC0 + 10, 0x3C00 + 9, 0x3D00 + 10, 0x3E00 + 9, 0x3F00 + 10, 0x3B40 + 11, 0x3BF0 + 12, 0x2B00 + 8, 0x21C0 + 11, 0x20C0 + 10, 0x2100 + 10, 0x2600 + 7, 0x2300 + 11, 0x21E0 + 12, 0x2140 + 11, 0x2D00 + 8, 0x46B0 + 13, 0x2340 + 12, 0x2080 + 10, 0x21A0 + 11, 0x2E00 + 8, 0x2C00 + 8, 0x2180 + 11, 0x46A0 + 13, 0x2F80 + 9, 0x2F00 + 9, 0x2A00 + 8, 0x2160 + 11, 0x2330 + 12, 0x21F0 + 12, 0x46C0 + 13, 0x2320 + 12, 0x46D0 + 13, 0x3DE0 + 12, 0x3FA0 + 11, 0x3DF0 + 12, 0x3D40 + 11, 0x3F60 + 11, 0x3FF0 + 12, 0xB000 + 4, 0x1C00 + 7, 0x0C00 + 6, 0x1000 + 6, 0x6000 + 3, 0x3000 + 7, 0x1E00 + 8, 0x1400 + 7, 0xD000 + 4, 0x3580 + 9, 0x3400 + 8, 0x0800 + 6, 0x1A00 + 7, 0xE000 + 4, 0xC000 + 4, 0x1800 + 7, 0x3500 + 9, 0xF800 + 5, 0xF000 + 5, 0xA000 + 4, 0x1600 + 7, 0x3300 + 8, 0x1F00 + 8, 0x3600 + 9, 0x3200 + 8, 0x3680 + 9, 0x3DA0 + 11, 0x3FC0 + 11, 0x3DC0 + 11, 0x3FE0 + 12]
2020-05-17 15:28:09 +01:00
# enum {SHX_STATE_1 = 1, SHX_STATE_2}; // removed Unicode state
SHX_STATE_1 = 1
SHX_STATE_2 = 2
SHX_SET1 = 0
SHX_SET1A = 1
SHX_SET1B = 2
SHX_SET2 = 3
2020-05-19 19:23:01 +01:00
sets = [['\0', ' ', 'e', '\0', 't', 'a', 'o', 'i', 'n', 's', 'r'],
['\0', 'l', 'c', 'd', 'h', 'u', 'p', 'm', 'b', 'g', 'w'],
['f', 'y', 'v', 'k', 'q', 'j', 'x', 'z', '\0', '\0', '\0'],
['\0', '9', '0', '1', '2', '3', '4', '5', '6', '7', '8'],
2020-05-17 15:28:09 +01:00
['.', ',', '-', '/', '?', '+', ' ', '(', ')', '$', '@'],
[';', '#', ':', '<', '^', '*', '"', '{', '}', '[', ']'],
['=', '%', '\'', '>', '&', '_', '!', '\\', '|', '~', '`']]
us_vcode = [2 + (0 << 3), 3 + (3 << 3), 3 + (1 << 3), 4 + (6 << 3), 0,
# 5, 6, 7, 8, 9, 10
4 + (4 << 3), 3 + (2 << 3), 4 + (8 << 3), 0, 0, 0,
# 11, 12, 13, 14, 15
4 + (7 << 3), 0, 4 + (5 << 3), 0, 5 + (9 << 3),
# 16, 17, 18, 19, 20, 21, 22, 23
0, 0, 0, 0, 0, 0, 0, 0,
# 24, 25, 26, 27, 28, 29, 30, 31
0, 0, 0, 0, 0, 0, 0, 5 + (10 << 3) ]
# 0, 1, 2, 3, 4, 5, 6, 7,
us_hcode = [1 + (1 << 3), 2 + (0 << 3), 0, 3 + (2 << 3), 0, 0, 0, 5 + (3 << 3),
# 8, 9, 10, 11, 12, 13, 14, 15,
0, 0, 0, 0, 0, 0, 0, 5 + (5 << 3),
# 16, 17, 18, 19, 20, 21, 22, 23
0, 0, 0, 0, 0, 0, 0, 5 + (4 << 3),
# 24, 25, 26, 27, 28, 29, 30, 31
0, 0, 0, 0, 0, 0, 0, 5 + (6 << 3) ]
# pylint: enable=bad-continuation,bad-whitespace
ESCAPE_MARKER = 0x2A
TERM_CODE = 0x37C0
# TERM_CODE_LEN = 10
DICT_CODE = 0x0000
DICT_CODE_LEN = 5
#DICT_OTHER_CODE = 0x0000
#DICT_OTHER_CODE_LEN = 6
RPT_CODE_TASMOTA = 0x3780
RPT_CODE_TASMOTA_LEN = 10
BACK2_STATE1_CODE = 0x2000
BACK2_STATE1_CODE_LEN = 4
#BACK_FROM_UNI_CODE = 0xFE00
#BACK_FROM_UNI_CODE_LEN = 8
LF_CODE = 0x3700
LF_CODE_LEN = 9
TAB_CODE = 0x2400
TAB_CODE_LEN = 7
ALL_UPPER_CODE = 0x2200
ALL_UPPER_CODE_LEN = 8
SW2_STATE2_CODE = 0x3800
SW2_STATE2_CODE_LEN = 7
ST2_SPC_CODE = 0x3B80
ST2_SPC_CODE_LEN = 11
BIN_CODE_TASMOTA = 0x8000
BIN_CODE_TASMOTA_LEN = 3
NICE_LEN = 5
mask = [0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC, 0xFE, 0xFF]
# pylint: disable=missing-function-docstring,invalid-name
# Input
# out = bytearray
def append_bits(self, out, ol, code, clen, state):
#print("Append bits {ol} {code} {clen} {state}".format(ol=ol, code=code, clen=clen, state=state))
if state == self.SHX_STATE_2:
# remove change state prefix
if (code >> 9) == 0x1C:
code <<= 7
clen -= 7
while clen > 0:
cur_bit = ol % 8
blen = 8 if (clen > 8) else clen
a_byte = (code >> 8) & self.mask[blen - 1]
#print("append_bits a_byte {ab} blen {blen}".format(ab=a_byte,blen=blen))
a_byte >>= cur_bit
if blen + cur_bit > 8:
blen = (8 - cur_bit)
if cur_bit == 0:
out[ol // 8] = a_byte
else:
out[ol // 8] |= a_byte
code <<= blen
ol += blen
if 0 == ol % 8: # pylint: disable=misplaced-comparison-constant
# we completed a full byte
last_c = out[(ol // 8) - 1]
if last_c in (0, self.ESCAPE_MARKER):
out[ol // 8] = 1 + last_c # increment to 0x01 or 0x2B
out[(ol // 8) -1] = self.ESCAPE_MARKER # replace old value with marker
ol += 8 # add one full byte
clen -= blen
return ol
codes = [0x82, 0xC3, 0xE5, 0xED, 0xF5] # pylint: disable=bad-whitespace
bit_len = [ 5, 7, 9, 12, 16] # pylint: disable=bad-whitespace
def encodeCount(self, out, ol, count):
#print("encodeCount ol = {ol}, count = {count}".format(ol=ol, count=count))
till = 0
base = 0
for i in range(len(self.bit_len)):
bit_len_i = self.bit_len[i]
till += (1 << bit_len_i)
if count < till:
codes_i = self.codes[i]
ol = self.append_bits(out, ol, (codes_i & 0xF8) << 8, codes_i & 0x07, 1)
#print("encodeCount append_bits ol = {ol}, code = {code}, len = {len}".format(ol=ol,code=(codes_i & 0xF8) << 8,len=codes_i & 0x07))
ol = self.append_bits(out, ol, (count - base) << (16 - bit_len_i), bit_len_i, 1)
#print("encodeCount append_bits ol = {ol}, code = {code}, len = {len}".format(ol=ol,code=(count - base) << (16 - bit_len_i),len=bit_len_i))
return ol
base = till
return ol
# Returns (int, ol, state, is_all_upper)
def matchOccurance(self, inn, len_, l_, out, ol, state, is_all_upper):
# int j, k;
longest_dist = 0
longest_len = 0
#for (j = l_ - self.NICE_LEN; j >= 0; j--) {
j = l_ - self.NICE_LEN
while j >= 0:
k = l_
#for (k = l_; k < len && j + k - l_ < l_; k++) {
while k < len_ and j + k - l_ < l_:
if inn[k] != inn[j + k - l_]:
break
k += 1
if k - l_ > self.NICE_LEN - 1:
match_len = k - l_ - self.NICE_LEN
match_dist = l_ - j - self.NICE_LEN + 1
if match_len > longest_len:
longest_len = match_len
longest_dist = match_dist
j -= 1
if longest_len:
#print("longest_len {ll}".format(ll=longest_len))
#ol_save = ol
if state == self.SHX_STATE_2 or is_all_upper:
is_all_upper = 0
state = self.SHX_STATE_1
ol = self.append_bits(out, ol, self.BACK2_STATE1_CODE, self.BACK2_STATE1_CODE_LEN, state)
ol = self.append_bits(out, ol, self.DICT_CODE, self.DICT_CODE_LEN, 1)
ol = self.encodeCount(out, ol, longest_len)
ol = self.encodeCount(out, ol, longest_dist)
#print("longest_len {ll} longest_dist {ld} ol {ols}-{ol}".format(ll=longest_len, ld=longest_dist, ol=ol, ols=ol_save))
l_ += longest_len + self.NICE_LEN
l_ -= 1
return l_, ol, state, is_all_upper
return -l_, ol, state, is_all_upper
def compress(self, inn, len_, out, len_out):
ol = 0
state = self.SHX_STATE_1
2020-05-17 09:37:42 +01:00
is_all_upper = 0
2020-05-17 15:28:09 +01:00
l = 0
while l < len_:
# for (l=0; l<len_; l++) {
c_in = inn[l]
if l and l < len_ - 4:
if c_in == inn[l - 1] and c_in == inn[l + 1] and c_in == inn[l + 2] and c_in == inn[l + 3]:
rpt_count = l + 4
while rpt_count < len_ and inn[rpt_count] == c_in:
rpt_count += 1
rpt_count -= l
if state == self.SHX_STATE_2 or is_all_upper:
is_all_upper = 0
state = self.SHX_STATE_1
ol = self.append_bits(out, ol, self.BACK2_STATE1_CODE, self.BACK2_STATE1_CODE_LEN, state) # back to lower case and Set1
ol = self.append_bits(out, ol, self.RPT_CODE_TASMOTA, self.RPT_CODE_TASMOTA_LEN, 1) # reusing CRLF for RPT
ol = self.encodeCount(out, ol, rpt_count - 4)
l += rpt_count
#l -= 1
continue
if l < (len_ - self.NICE_LEN + 1):
#l_old = l
(l, ol, state, is_all_upper) = self.matchOccurance(inn, len_, l, out, ol, state, is_all_upper)
if l > 0:
#print("matchOccurance l = {l} l_old = {lo}".format(l=l,lo=l_old))
l += 1 # for loop
continue
l = -l
if state == self.SHX_STATE_2: # if Set2
if ord(' ') <= c_in <= ord('@') or ord('[') <= c_in <= ord('`') or ord('{') <= c_in <= ord('~'):
pass
else:
state = self.SHX_STATE_1 # back to Set1 and lower case
ol = self.append_bits(out, ol, self.BACK2_STATE1_CODE, self.BACK2_STATE1_CODE_LEN, state)
2020-05-17 09:37:42 +01:00
is_upper = 0
2020-05-17 15:28:09 +01:00
if ord('A') <= c_in <= ord('Z'):
is_upper = 1
else:
if is_all_upper:
is_all_upper = 0
ol = self.append_bits(out, ol, self.BACK2_STATE1_CODE, self.BACK2_STATE1_CODE_LEN, state)
if 32 <= c_in <= 126:
if is_upper and not is_all_upper:
ll = l+5
# for (ll=l+5; ll>=l && ll<len_; ll--) {
while l <= ll < len_:
if inn[ll] < ord('A') or inn[ll] > ord('Z'):
break
ll -= 1
if ll == l-1:
ol = self.append_bits(out, ol, self.ALL_UPPER_CODE, self.ALL_UPPER_CODE_LEN, state) # CapsLock
is_all_upper = 1
if state == self.SHX_STATE_1 and ord('0') <= c_in <= ord('9'):
ol = self.append_bits(out, ol, self.SW2_STATE2_CODE, self.SW2_STATE2_CODE_LEN, state) # Switch to sticky Set2
state = self.SHX_STATE_2
c_in -= 32
if is_all_upper and is_upper:
c_in += 32
if c_in == 0 and state == self.SHX_STATE_2:
ol = self.append_bits(out, ol, self.ST2_SPC_CODE, self.ST2_SPC_CODE_LEN, state) # space from Set2 ionstead of Set1
else:
# ol = self.append_bits(out, ol, pgm_read_word(&c_95[c_in]), pgm_read_byte(&l_95[c_in]), state); // original version with c/l in split arrays
cl = self.cl_95[c_in]
2020-05-25 22:29:54 +01:00
cl_code = cl & 0xFFF0
cl_len = cl & 0x000F
if cl_len == 13:
cl_code = cl_code >> 1
ol = self.append_bits(out, ol, cl_code, cl_len, state)
2020-05-17 15:28:09 +01:00
elif c_in == 10:
ol = self.append_bits(out, ol, self.LF_CODE, self.LF_CODE_LEN, state) # LF
elif c_in == '\t':
ol = self.append_bits(out, ol, self.TAB_CODE, self.TAB_CODE_LEN, state) # TAB
else:
ol = self.append_bits(out, ol, self.BIN_CODE_TASMOTA, self.BIN_CODE_TASMOTA_LEN, state) # Binary, we reuse the Unicode marker which 3 bits instead of 9
ol = self.encodeCount(out, ol, (255 - c_in) & 0xFF)
# check that we have some headroom in the output buffer
if ol // 8 >= len_out - 4:
return -1 # we risk overflow and crash
l += 1
bits = ol % 8
if bits:
ol = self.append_bits(out, ol, self.TERM_CODE, 8 - bits, 1) # 0011 0111 1100 0000 TERM = 0011 0111 11
return (ol + 7) // 8
# return ol // 8 + 1 if (ol%8) else 0
def getBitVal(self, inn, bit_no, count):
c_in = inn[bit_no >> 3]
if bit_no >> 3 and self.ESCAPE_MARKER == inn[(bit_no >> 3) - 1]:
c_in -= 1
r = 1 << count if (c_in & (0x80 >> (bit_no % 8))) else 0
#print("getBitVal r={r}".format(r=r))
return r
# Returns:
# 0..11
# or -1 if end of stream
def getCodeIdx(self, code_type, inn, len_, bit_no_p):
code = 0
count = 0
while count < 5:
2020-05-19 19:23:01 +01:00
if bit_no_p >= len_:
return -1, bit_no_p
2020-05-17 15:28:09 +01:00
# detect marker
if self.ESCAPE_MARKER == inn[bit_no_p >> 3]:
bit_no_p += 8 # skip marker
if bit_no_p >= len_:
return -1, bit_no_p
code += self.getBitVal(inn, bit_no_p, count)
bit_no_p += 1
count += 1
code_type_code = code_type[code]
if code_type_code and (code_type_code & 0x07) == count:
#print("getCodeIdx = {r}".format(r=code_type_code >> 3))
return code_type_code >> 3, bit_no_p
#print("getCodeIdx not found = {r}".format(r=1))
return 1, bit_no_p
2020-07-07 11:09:30 +01:00
def getNumFromBits(self, inn, bit_no_p, count):
2020-05-17 15:28:09 +01:00
ret = 0
while count:
2020-05-17 09:37:42 +01:00
count -= 1
2020-07-07 11:09:30 +01:00
if self.ESCAPE_MARKER == inn[bit_no_p >> 3]:
bit_no_p += 8 # skip marker
ret += self.getBitVal(inn, bit_no_p, count)
bit_no_p += 1
# print("getNumFromBits = {r}".format(r=ret))
return ret, bit_no_p
2020-05-17 15:28:09 +01:00
def readCount(self, inn, bit_no_p, len_):
(idx, bit_no_p) = self.getCodeIdx(self.us_hcode, inn, len_, bit_no_p)
if idx >= 1:
idx -= 1 # we skip v = 1 (code '0') since we no more accept 2 bits encoding
if idx >= 5 or idx < 0:
return 0, bit_no_p # unsupported or end of stream
till = 0
bit_len_idx = 0
base = 0
#for (uint32_t i = 0; i <= idx; i++) {
i = 0
while i <= idx:
# for i in range(idx):
base = till
bit_len_idx = self.bit_len[i]
till += (1 << bit_len_idx)
i += 1
2020-07-07 11:09:30 +01:00
(count, bit_no_p) = self.getNumFromBits(inn, bit_no_p, bit_len_idx)
count = count + base
2020-05-17 15:28:09 +01:00
#print("readCount getNumFromBits = {count} ({bl})".format(count=count,bl=bit_len_idx))
return count, bit_no_p
def decodeRepeat(self, inn, len_, out, ol, bit_no):
#print("decodeRepeat Enter")
(dict_len, bit_no) = self.readCount(inn, bit_no, len_)
dict_len += self.NICE_LEN
(dist, bit_no) = self.readCount(inn, bit_no, len_)
dist += self.NICE_LEN - 1
#memcpy(out + ol, out + ol - dist, dict_len);
i = 0
while i < dict_len:
#for i in range(dict_len):
out[ol + i] = out[ol - dist + i]
i += 1
ol += dict_len
return ol, bit_no
def decompress(self, inn, len_, out, len_out):
ol = 0
bit_no = 0
dstate = self.SHX_SET1
is_all_upper = 0
2020-05-17 09:37:42 +01:00
2020-05-17 15:28:09 +01:00
len_ <<= 3 # *8, len_ in bits
out[ol] = 0
while bit_no < len_:
c = 0
is_upper = is_all_upper
(v, bit_no) = self.getCodeIdx(self.us_vcode, inn, len_, bit_no) # read vCode
#print("bit_no {b}. v = {v}".format(b=bit_no,v=v))
if v < 0:
break # end of stream
h = dstate # Set1 or Set2
if v == 0: # Switch which is common to Set1 and Set2, first entry
(h, bit_no) = self.getCodeIdx(self.us_hcode, inn, len_, bit_no) # read hCode
#print("bit_no {b}. h = {h}".format(b=bit_no,h=h))
if h < 0:
break # end of stream
if h == self.SHX_SET1: # target is Set1
if dstate == self.SHX_SET1: # Switch from Set1 to Set1 us UpperCase
if is_all_upper: # if CapsLock, then back to LowerCase
is_upper = 0
is_all_upper = 0
continue
(v, bit_no) = self.getCodeIdx(self.us_vcode, inn, len_, bit_no) # read again vCode
if v < 0:
break # end of stream
if v == 0:
(h, bit_no) = self.getCodeIdx(self.us_hcode, inn, len_, bit_no) # read second hCode
if h < 0:
break # end of stream
if h == self.SHX_SET1: # If double Switch Set1, the CapsLock
is_all_upper = 1
continue
is_upper = 1 # anyways, still uppercase
else:
dstate = self.SHX_SET1 # if Set was not Set1, switch to Set1
continue
elif h == self.SHX_SET2: # If Set2, switch dstate to Set2
if dstate == self.SHX_SET1:
dstate = self.SHX_SET2
continue
if h != self.SHX_SET1: # all other Sets (why not else)
(v, bit_no) = self.getCodeIdx(self.us_vcode, inn, len_, bit_no) # we changed set, now read vCode for char
if v < 0:
break # end of stream
if v == 0 and h == self.SHX_SET1A:
#print("v = 0, h = self.SHX_SET1A")
if is_upper:
(temp, bit_no) = self.readCount(inn, bit_no, len_)
out[ol] = 255 - temp # binary
ol += 1
else:
(ol, bit_no) = self.decodeRepeat(inn, len_, out, ol, bit_no) # dist
continue
if h == self.SHX_SET1 and v == 3:
# was Unicode, will do Binary instead
(temp, bit_no) = self.readCount(inn, bit_no, len_)
out[ol] = 255 - temp # binary
ol += 1
continue
if h < 7 and v < 11:
#print("h {h} v {v}".format(h=h,v=v))
c = ord(self.sets[h][v])
if ord('a') <= c <= ord('z'):
if is_upper:
c -= 32 # go to UpperCase for letters
else: # handle all other cases
if is_upper and dstate == self.SHX_SET1 and v == 1:
c = ord('\t') # If UpperCase Space, change to TAB
if h == self.SHX_SET1B:
if 8 == v: # was LF or RPT, now only LF # pylint: disable=misplaced-comparison-constant
out[ol] = ord('\n')
ol += 1
continue
if 9 == v: # was CRLF, now RPT # pylint: disable=misplaced-comparison-constant
(count, bit_no) = self.readCount(inn, bit_no, len_)
count += 4
if ol + count >= len_out:
return -1 # overflow
rpt_c = out[ol - 1]
while count:
count -= 1
out[ol] = rpt_c
ol += 1
continue
if 10 == v: # pylint: disable=misplaced-comparison-constant
break # TERM, stop decoding
out[ol] = c
ol += 1
2020-05-17 09:37:42 +01:00
2020-05-17 15:28:09 +01:00
if ol >= len_out:
return -1 # overflow
2020-05-17 09:37:42 +01:00
2020-05-17 15:28:09 +01:00
return ol
2020-05-17 09:37:42 +01:00
2020-05-17 15:28:09 +01:00
# pylint: enable=missing-function-docstring
2020-05-17 09:37:42 +01:00
if __name__ == "__main__":
2020-05-17 15:28:09 +01:00
# pylint: disable=line-too-long
UNISHOX = Unishox()
BYTES_ = bytearray(2048)
INN = bytearray(b'ON Switch1#State==1 DO Add1 1 ENDON ON Var1#State==0 DO ShutterStop1 ENDON ON Var1#State==1 DO ShutterClose1 ENDON ON Var1#State>=2 DO Var1 0 ENDON ON Shutter1#Close DO Var1 0 ENDON ON Switch2#State==1 DO Add2 1 ENDON ON Var2#State==0 DO ShutterStop1 ENDON ON Var2#State==1 DO ShutterOpen1 ENDON ON Var2#State>=2 DO Var2 0 ENDON ON Shutter1#Open DO Var2 0 ENDON')
LEN_ = UNISHOX.compress(INN, len(INN), BYTES_, len(BYTES_))
print("Compressed from {fromm} to {to} ({p}%)".format(fromm=len(INN), to=LEN_, p=(100-LEN_/len(INN)*100)))
OUT = bytearray(2048)
LEN_ = UNISHOX.decompress(BYTES_, LEN_, OUT, len(OUT))
print(str(OUT, 'utf-8').split('\x00')[0])