2023-02-28 16:54:43 +00:00
/*
2023-03-01 09:12:47 +00:00
xdrv_67_mcp23xxx . ino - MCP23008 / MCP23017 / MCP23S17 GPIO Expander support for Tasmota
2023-02-28 16:54:43 +00:00
SPDX - FileCopyrightText : 2023 Theo Arends
SPDX - License - Identifier : GPL - 3.0 - only
*/
2023-03-01 15:52:34 +00:00
# if defined(USE_I2C) || defined(USE_SPI)
2023-02-28 16:54:43 +00:00
# ifdef USE_MCP23XXX_DRV
/*********************************************************************************************\
2023-03-02 10:24:54 +00:00
* MCP23008 / 17 ( I2C ) and MCP23S17 ( SPI ) GPIO Expander to be used as virtual button / switch / relay only
2023-02-28 16:54:43 +00:00
*
* Docs at https : //www.microchip.com/wwwproducts/en/MCP23008
* https : //www.microchip.com/wwwproducts/en/MCP23017
*
* I2C Address : 0x20 - 0x26 ( 0x27 is not supported )
*
2023-03-01 15:52:34 +00:00
* The goal of the driver is to provide a sequential list of pins configured as Tasmota template
2023-02-28 16:54:43 +00:00
* and handle any input and output as configured GPIOs .
*
* Restrictions :
2023-03-02 10:24:54 +00:00
* - Uses incremental I2C addresses / SPI Chip select until template pin count reached
2023-02-28 16:54:43 +00:00
* - Max support for 28 switches ( input ) , 32 buttons ( input ) , 32 relays ( output )
*
* Supported template fields :
* NAME - Template name
2023-03-24 17:00:24 +00:00
* BASE - Optional . 0 = use relative buttons and switches ( default ) , 1 = use absolute buttons and switches
2023-02-28 16:54:43 +00:00
* GPIO - Sequential list of pin 1 and up with configured GPIO function
2023-03-02 10:24:54 +00:00
* Function Code Description
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* None 0 Not used
* Button1 . .32 B 32. .63 Button to Gnd with internal pullup
* Button_n1 . .32 Bn 64. .95 Button to Gnd without internal pullup
* Button_i1 . .32 Bi 96. .127 Button inverted to Vcc with internal pullup
* Button_in1 . .32 Bin 128. .159 Button inverted to Vcc without internal pullup
* Switch1 . .28 S 160. .187 Switch to Gnd with internal pullup
* Switch_n1 . .28 Sn 192. .219 Switch to Gnd without internal pullup
2023-03-24 17:00:24 +00:00
* Relay1 . .32 R 224. .255 Relay
* Relay_i1 . .32 Ri 256. .287 Relay inverted
2023-03-03 09:44:35 +00:00
* Output_Hi Oh 3840 Fixed output high
* Output_lo Ol 3872 Fixed output low
2023-02-28 16:54:43 +00:00
*
* Prepare a template to be loaded either by :
2023-03-02 10:24:54 +00:00
* - a rule like : rule3 on file # mcp23x . dat do { " NAME " : " MCP23017 A=Ri8-1, B=B1-8 " , " GPIO " : [ 263 , 262 , 261 , 260 , 259 , 258 , 257 , 256 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 ] } endon
* - a script like : - y { " NAME " : " MCP23017 A=Ri8-1, B=B1-8 " , " GPIO " : [ 263 , 262 , 261 , 260 , 259 , 258 , 257 , 256 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 ] }
* - file called mcp23x . dat with contents : { " NAME " : " MCP23017 A=Ri8-1, B=B1-8 " , " GPIO " : [ 263 , 262 , 261 , 260 , 259 , 258 , 257 , 256 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 ] }
2023-02-28 16:54:43 +00:00
*
2023-03-03 09:44:35 +00:00
* S3 S2 B2 B3 Oh B1 S1 R1 R4 R2 R3 S4
* { " NAME " : " MCP23S17 Shelly Pro 4PM " , " GPIO " : [ 194 , 193 , 65 , 66 , 3840 , 64 , 192 , 0 , 224 , 0 , 0 , 0 , 227 , 225 , 226 , 195 ] }
2023-03-01 15:52:34 +00:00
*
2023-03-02 10:24:54 +00:00
* Inverted relays and buttons Ri8 Ri7 Ri6 Ri5 Ri4 Ri3 Ri2 Ri1 B1 B2 B3 B4 B5 B6 B7 B8
* { " NAME " : " MCP23017 A=Ri8-1, B=B1-8 " , " GPIO " : [ 263 , 262 , 261 , 260 , 259 , 258 , 257 , 256 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 ] }
2023-02-28 16:54:43 +00:00
*
2023-03-02 10:24:54 +00:00
* Inverted relays and buttons Ri1 Ri2 Ri3 Ri4 Ri5 Ri6 Ri7 Ri8 B1 B2 B3 B4 B5 B6 B7 B8
* { " NAME " : " MCP23017 A=Ri1-8, B=B1-8 " , " GPIO " : [ 256 , 257 , 258 , 259 , 260 , 261 , 262 , 263 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 ] }
2023-02-28 16:54:43 +00:00
*
2023-03-02 10:24:54 +00:00
* Relays and buttons R1 R2 R3 R4 R5 R6 R7 R8 B1 B2 B3 B4 B5 B6 B7 B8
* { " NAME " : " MCP23017 A=R1-8, B=B1-8 " , " GPIO " : [ 224 , 225 , 226 , 227 , 228 , 229 , 230 , 231 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 ] }
2023-02-28 16:54:43 +00:00
*
2023-03-02 10:24:54 +00:00
* Buttons and relays B1 B2 B3 B4 B5 B6 B7 B8 R1 R2 R3 R4 R5 R6 R7 R8
* { " NAME " : " MCP23017 A=B1-8, B=R1-8 " , " GPIO " : [ 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 224 , 225 , 226 , 227 , 228 , 229 , 230 , 231 ] }
2023-02-28 16:54:43 +00:00
*
2023-03-02 10:24:54 +00:00
* Buttons , relays , buttons and relays B1 B2 B3 B4 B5 B6 B7 B8 R1 R2 R3 R4 R5 R6 R7 R8 B9 B10B11B12B13B14B15B16R9 R10 R11 R12 R13 R14 R15 R16
* { " NAME " : " MCP23017 A=B1-8, B=R1-8, C=B9-16, D=R9-16 " , " GPIO " : [ 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 224 , 225 , 226 , 227 , 228 , 229 , 230 , 231 , 40 , 41 , 42 , 43 , 44 , 45 , 46 , 47 , 232 , 233 , 234 , 235 , 236 , 237 , 238 , 239 ] }
2023-02-28 16:54:43 +00:00
*
2023-03-02 10:24:54 +00:00
* { " NAME " : " MCP23017 A=R1-8, B=B1-8, C=R9-16, D=B9-16 " , " GPIO " : [ 224 , 225 , 226 , 227 , 228 , 229 , 230 , 231 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 232 , 233 , 234 , 235 , 236 , 237 , 238 , 239 , 40 , 41 , 42 , 43 , 44 , 45 , 46 , 47 ] }
2023-02-28 16:54:43 +00:00
*
2023-03-02 10:24:54 +00:00
* 32 relays R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R18 R19 R20 R21 R22 R23 R24 R25 R26 R27 R28 R29 R30 R31 R32
* { " NAME " : " MCP23017 A=Ri1-8, B=Ri9-16, C=Ri17-24, D=Ri25-32 " , " GPIO " : [ 256 , 257 , 258 , 259 , 260 , 261 , 262 , 263 , 264 , 265 , 266 , 267 , 268 , 269 , 270 , 271 , 272 , 273 , 274 , 275 , 276 , 277 , 278 , 279 , 280 , 281 , 282 , 283 , 284 , 285 , 286 , 287 ] }
* { " NAME " : " MCP23017 A=R1-8, B=R9-16, C=R17-24, D=R25-32 " , " GPIO " : [ 224 , 225 , 226 , 227 , 228 , 229 , 230 , 231 , 232 , 233 , 234 , 235 , 236 , 237 , 238 , 239 , 240 , 241 , 242 , 243 , 244 , 245 , 246 , 247 , 248 , 249 , 250 , 251 , 252 , 253 , 254 , 255 ] }
2023-02-28 16:54:43 +00:00
*
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# define XDRV_67 67
2023-03-03 09:44:35 +00:00
# define XI2C_77 77 // See I2CDEVICES.md
2023-02-28 16:54:43 +00:00
2023-03-03 09:44:35 +00:00
# define MCP23XXX_ADDR_START 0x20 // 32
# define MCP23XXX_ADDR_END 0x26 // 38
2023-02-28 16:54:43 +00:00
# define MCP23XXX_MAX_DEVICES 6
2023-03-03 09:44:35 +00:00
# define MCP23XXX_SPI_CLOCK 1000000 // SPI clock speed set to 1MHz in case of signal interference at higher speed (Max is 10MHz)
2023-02-28 16:54:43 +00:00
/*********************************************************************************************\
* MCP23017 support
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
enum MCP23S08GPIORegisters {
MCP23X08_IODIR = 0x00 ,
MCP23X08_IPOL = 0x01 ,
MCP23X08_GPINTEN = 0x02 ,
MCP23X08_DEFVAL = 0x03 ,
MCP23X08_INTCON = 0x04 ,
MCP23X08_IOCON = 0x05 ,
MCP23X08_GPPU = 0x06 ,
MCP23X08_INTF = 0x07 ,
MCP23X08_INTCAP = 0x08 ,
MCP23X08_GPIO = 0x09 ,
MCP23X08_OLAT = 0x0A ,
} ;
enum MCP23X17GPIORegisters {
// A side
MCP23X17_IODIRA = 0x00 ,
MCP23X17_IPOLA = 0x02 ,
MCP23X17_GPINTENA = 0x04 ,
MCP23X17_DEFVALA = 0x06 ,
MCP23X17_INTCONA = 0x08 ,
MCP23X17_IOCONA = 0x0A ,
MCP23X17_GPPUA = 0x0C ,
MCP23X17_INTFA = 0x0E ,
MCP23X17_INTCAPA = 0x10 ,
MCP23X17_GPIOA = 0x12 ,
MCP23X17_OLATA = 0x14 ,
// B side
MCP23X17_IODIRB = 0x01 ,
MCP23X17_IPOLB = 0x03 ,
MCP23X17_GPINTENB = 0x05 ,
MCP23X17_DEFVALB = 0x07 ,
MCP23X17_INTCONB = 0x09 ,
MCP23X17_IOCONB = 0x0B ,
MCP23X17_GPPUB = 0x0D ,
MCP23X17_INTFB = 0x0F ,
MCP23X17_INTCAPB = 0x11 ,
MCP23X17_GPIOB = 0x13 ,
MCP23X17_OLATB = 0x15 ,
} ;
enum MCP23XInterruptMode { MCP23XXX_NO_INTERRUPT , MCP23XXX_CHANGE , MCP23XXX_RISING , MCP23XXX_FALLING } ;
enum MCP23XInterfaces { MCP23X_I2C , MCP23X_SPI } ;
typedef struct {
uint8_t olata ;
uint8_t olatb ;
uint8_t address ;
uint8_t interface ;
2024-03-18 09:18:14 +00:00
uint8_t pins ; // 8 (MCP23x08) or 16 (MCP23x17)
2023-02-28 16:54:43 +00:00
int8_t pin_cs ;
2023-03-02 10:24:54 +00:00
int8_t pin_int ;
2023-02-28 16:54:43 +00:00
} tMcp23xDevice ;
struct MCP230 {
tMcp23xDevice device [ MCP23XXX_MAX_DEVICES ] ;
uint32_t relay_inverted ;
uint32_t button_inverted ;
uint8_t chip ;
uint8_t max_devices ;
uint8_t max_pins ;
uint8_t relay_max ;
uint8_t relay_offset ;
uint8_t button_max ;
uint8_t switch_max ;
int8_t button_offset ;
int8_t switch_offset ;
2023-03-26 10:39:30 +01:00
bool base ;
2023-03-02 10:24:54 +00:00
bool interrupt ;
2023-02-28 16:54:43 +00:00
} Mcp23x ;
uint16_t * Mcp23x_gpio_pin = nullptr ;
/*********************************************************************************************\
* MCP23x17 - SPI and I2C
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# ifdef USE_SPI
void MCP23xEnable ( void ) {
2023-03-03 09:44:35 +00:00
SPI . beginTransaction ( SPISettings ( MCP23XXX_SPI_CLOCK , MSBFIRST , SPI_MODE0 ) ) ;
2023-02-28 16:54:43 +00:00
digitalWrite ( Mcp23x . device [ Mcp23x . chip ] . pin_cs , 0 ) ;
}
void MCP23xDisable ( void ) {
SPI . endTransaction ( ) ;
digitalWrite ( Mcp23x . device [ Mcp23x . chip ] . pin_cs , 1 ) ;
}
# endif
2023-03-01 15:52:34 +00:00
void MCP23xDumpRegs ( void ) {
uint8_t data [ 22 ] ;
for ( Mcp23x . chip = 0 ; Mcp23x . chip < Mcp23x . max_devices ; Mcp23x . chip + + ) {
2023-03-03 09:44:35 +00:00
uint32_t data_size = sizeof ( data ) ;
if ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) { data_size / = 2 ; }
2023-03-01 15:52:34 +00:00
# ifdef USE_SPI
if ( MCP23X_SPI = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
MCP23xEnable ( ) ;
SPI . transfer ( Mcp23x . device [ Mcp23x . chip ] . address | 1 ) ;
SPI . transfer ( 0 ) ;
2023-03-03 09:44:35 +00:00
for ( uint32_t i = 0 ; i < data_size ; i + + ) {
2023-03-01 15:52:34 +00:00
data [ i ] = SPI . transfer ( 0xFF ) ;
}
MCP23xDisable ( ) ;
}
# endif
# ifdef USE_I2C
if ( MCP23X_I2C = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
2023-03-03 09:44:35 +00:00
I2cReadBuffer ( Mcp23x . device [ Mcp23x . chip ] . address , 0 , data , data_size ) ;
2023-03-01 15:52:34 +00:00
}
# endif
2023-03-03 09:44:35 +00:00
AddLog ( LOG_LEVEL_DEBUG , PSTR ( " MCP: Intf %d, Address %02X, Regs %*_H " ) , Mcp23x . device [ Mcp23x . chip ] . interface , Mcp23x . device [ Mcp23x . chip ] . address , data_size , data ) ;
2023-03-01 15:52:34 +00:00
}
}
2023-02-28 16:54:43 +00:00
uint32_t MCP23xRead16 ( uint8_t reg ) {
// Read 16-bit registers: (regb << 8) | rega
uint32_t value = 0 ;
# ifdef USE_SPI
if ( MCP23X_SPI = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
MCP23xEnable ( ) ;
SPI . transfer ( Mcp23x . device [ Mcp23x . chip ] . address | 1 ) ;
SPI . transfer ( reg ) ;
value = SPI . transfer ( 0xFF ) ; // RegA
value | = ( SPI . transfer ( 0xFF ) < < 8 ) ; // RegB
MCP23xDisable ( ) ;
}
# endif
# ifdef USE_I2C
if ( MCP23X_I2C = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
value = I2cRead16LE ( Mcp23x . device [ Mcp23x . chip ] . address , reg ) ;
}
# endif
return value ;
}
uint32_t MCP23xRead ( uint8_t reg ) {
uint32_t value = 0 ;
# ifdef USE_SPI
if ( MCP23X_SPI = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
MCP23xEnable ( ) ;
SPI . transfer ( Mcp23x . device [ Mcp23x . chip ] . address | 1 ) ;
SPI . transfer ( reg ) ;
value = SPI . transfer ( 0xFF ) ;
MCP23xDisable ( ) ;
}
# endif
# ifdef USE_I2C
if ( MCP23X_I2C = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
value = I2cRead8 ( Mcp23x . device [ Mcp23x . chip ] . address , reg ) ;
}
# endif
return value ;
}
bool MCP23xValidRead ( uint8_t reg , uint8_t * data ) {
# ifdef USE_SPI
if ( MCP23X_SPI = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
MCP23xEnable ( ) ;
SPI . transfer ( Mcp23x . device [ Mcp23x . chip ] . address | 1 ) ;
SPI . transfer ( reg ) ;
* data = SPI . transfer ( 0xFF ) ;
MCP23xDisable ( ) ;
return true ;
}
# endif
2023-03-01 15:52:34 +00:00
# ifdef USE_I2C
2023-02-28 16:54:43 +00:00
if ( MCP23X_I2C = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
return I2cValidRead8 ( data , Mcp23x . device [ Mcp23x . chip ] . address , reg ) ;
}
return false ;
2023-03-01 15:52:34 +00:00
# endif
2023-02-28 16:54:43 +00:00
}
void MCP23xWrite ( uint8_t reg , uint8_t value ) {
# ifdef USE_SPI
if ( MCP23X_SPI = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
MCP23xEnable ( ) ;
SPI . transfer ( Mcp23x . device [ Mcp23x . chip ] . address ) ;
SPI . transfer ( reg ) ;
SPI . transfer ( value ) ;
MCP23xDisable ( ) ;
}
# endif
# ifdef USE_I2C
if ( MCP23X_I2C = = Mcp23x . device [ Mcp23x . chip ] . interface ) {
I2cWrite8 ( Mcp23x . device [ Mcp23x . chip ] . address , reg , value ) ;
}
# endif
}
/*********************************************************************************************/
void MCP23xUpdate ( uint8_t pin , bool pin_value , uint8_t reg_addr ) {
// pin = 0 - 15
uint8_t bit = pin % 8 ;
uint8_t reg_value = 0 ;
if ( reg_addr = = MCP23X17_OLATA ) {
reg_value = Mcp23x . device [ Mcp23x . chip ] . olata ;
2023-03-03 09:44:35 +00:00
if ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) {
reg_addr = MCP23X08_OLAT ;
}
2023-02-28 16:54:43 +00:00
} else if ( reg_addr = = MCP23X17_OLATB ) {
reg_value = Mcp23x . device [ Mcp23x . chip ] . olatb ;
} else {
reg_value = MCP23xRead ( reg_addr ) ;
}
if ( pin_value ) {
reg_value | = 1 < < bit ;
} else {
reg_value & = ~ ( 1 < < bit ) ;
}
MCP23xWrite ( reg_addr , reg_value ) ;
2023-03-03 09:44:35 +00:00
if ( ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) & & ( reg_addr = = MCP23X08_OLAT ) ) {
reg_addr = MCP23X17_OLATA ;
}
2023-02-28 16:54:43 +00:00
if ( reg_addr = = MCP23X17_OLATA ) {
Mcp23x . device [ Mcp23x . chip ] . olata = reg_value ;
} else if ( reg_addr = = MCP23X17_OLATB ) {
Mcp23x . device [ Mcp23x . chip ] . olatb = reg_value ;
}
}
/*********************************************************************************************/
2023-03-03 09:44:35 +00:00
uint32_t MCP23xSetChip ( uint8_t pin ) {
2024-03-18 09:18:14 +00:00
// Calculate chip based on number of pins per chip. 8 for MCP23x08, 16 for MCP23x17
2023-03-03 09:44:35 +00:00
// pin 0 - 63
for ( Mcp23x . chip = 0 ; Mcp23x . chip < Mcp23x . max_devices ; Mcp23x . chip + + ) {
if ( Mcp23x . device [ Mcp23x . chip ] . pins > pin ) { break ; }
pin - = Mcp23x . device [ Mcp23x . chip ] . pins ;
}
return pin ; // relative pin number within chip (0 ... 7 or 0 ... 15)
}
2023-02-28 16:54:43 +00:00
void MCP23xPinMode ( uint8_t pin , uint8_t flags ) {
2023-03-03 09:44:35 +00:00
// pin 0 - 63
pin = MCP23xSetChip ( pin ) ;
uint8_t iodir ;
uint8_t gppu ;
if ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) {
iodir = MCP23X08_IODIR ;
gppu = MCP23X08_GPPU ;
} else {
iodir = pin < 8 ? MCP23X17_IODIRA : MCP23X17_IODIRB ;
gppu = pin < 8 ? MCP23X17_GPPUA : MCP23X17_GPPUB ;
}
2023-02-28 16:54:43 +00:00
switch ( flags ) {
case INPUT :
MCP23xUpdate ( pin , true , iodir ) ;
MCP23xUpdate ( pin , false , gppu ) ;
break ;
case INPUT_PULLUP :
MCP23xUpdate ( pin , true , iodir ) ;
MCP23xUpdate ( pin , true , gppu ) ;
break ;
case OUTPUT :
MCP23xUpdate ( pin , false , iodir ) ;
break ;
}
2023-03-03 09:44:35 +00:00
// AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: MCP23xPinMode chip %d, pin %d, flags %d, regs %d,%d"), Mcp23x.chip, pin, flags, iodir, gppu);
2023-02-28 16:54:43 +00:00
}
void MCP23xPinInterruptMode ( uint8_t pin , uint8_t interrupt_mode ) {
2023-03-03 09:44:35 +00:00
// pin 0 - 63
pin = MCP23xSetChip ( pin ) ;
uint8_t gpinten ;
uint8_t intcon ;
uint8_t defval ;
if ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) {
gpinten = MCP23X08_GPINTEN ;
intcon = MCP23X08_INTCON ;
defval = MCP23X08_DEFVAL ;
} else {
gpinten = pin < 8 ? MCP23X17_GPINTENA : MCP23X17_GPINTENB ;
intcon = pin < 8 ? MCP23X17_INTCONA : MCP23X17_INTCONB ;
defval = pin < 8 ? MCP23X17_DEFVALA : MCP23X17_DEFVALB ;
}
2023-02-28 16:54:43 +00:00
switch ( interrupt_mode ) {
case MCP23XXX_CHANGE :
MCP23xUpdate ( pin , true , gpinten ) ;
MCP23xUpdate ( pin , false , intcon ) ;
break ;
case MCP23XXX_RISING :
MCP23xUpdate ( pin , true , gpinten ) ;
MCP23xUpdate ( pin , true , intcon ) ;
MCP23xUpdate ( pin , true , defval ) ;
break ;
case MCP23XXX_FALLING :
MCP23xUpdate ( pin , true , gpinten ) ;
MCP23xUpdate ( pin , true , intcon ) ;
MCP23xUpdate ( pin , false , defval ) ;
break ;
case MCP23XXX_NO_INTERRUPT :
MCP23xUpdate ( pin , false , gpinten ) ;
break ;
}
}
2023-03-03 09:44:35 +00:00
void MCP23xSetPinModes ( uint8_t pin , uint8_t flags ) {
// pin 0 - 63
MCP23xPinMode ( pin , flags ) ;
if ( Mcp23x . device [ Mcp23x . chip ] . pin_int > - 1 ) { // Mcp23x.chip is updated by call to MCP23xPinMode
MCP23xPinInterruptMode ( pin , MCP23XXX_CHANGE ) ;
}
}
2023-02-28 16:54:43 +00:00
bool MCP23xDigitalRead ( uint8_t pin ) {
2023-03-03 09:44:35 +00:00
// pin 0 - 63
pin = MCP23xSetChip ( pin ) ;
2023-02-28 16:54:43 +00:00
uint8_t bit = pin % 8 ;
2023-03-03 09:44:35 +00:00
uint8_t reg_addr ;
if ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) {
reg_addr = MCP23X08_GPIO ;
} else {
reg_addr = pin < 8 ? MCP23X17_GPIOA : MCP23X17_GPIOB ;
}
2023-02-28 16:54:43 +00:00
uint8_t value = MCP23xRead ( reg_addr ) ;
return value & ( 1 < < bit ) ;
}
void MCP23xDigitalWrite ( uint8_t pin , bool value ) {
2023-03-03 09:44:35 +00:00
// pin 0 - 63
pin = MCP23xSetChip ( pin ) ;
2023-02-28 16:54:43 +00:00
uint8_t reg_addr = pin < 8 ? MCP23X17_OLATA : MCP23X17_OLATB ;
2023-03-03 09:44:35 +00:00
// AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: MCP23xDigitalWrite chip %d, pin %d, state %d, reg %d"), Mcp23x.chip, pin, value, reg_addr);
2023-02-28 16:54:43 +00:00
MCP23xUpdate ( pin , value , reg_addr ) ;
}
/*********************************************************************************************\
* Tasmota
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2023-03-03 09:44:35 +00:00
int MCP23xPin ( uint32_t gpio , uint32_t index = 0 ) ;
int MCP23xPin ( uint32_t gpio , uint32_t index ) {
2023-02-28 16:54:43 +00:00
uint16_t real_gpio = gpio < < 5 ;
uint16_t mask = 0xFFE0 ;
if ( index < GPIO_ANY ) {
real_gpio + = index ;
mask = 0xFFFF ;
}
for ( uint32_t i = 0 ; i < Mcp23x . max_pins ; i + + ) {
if ( ( Mcp23x_gpio_pin [ i ] & mask ) = = real_gpio ) {
return i ; // Pin number configured for gpio
}
}
return - 1 ; // No pin used for gpio
}
bool MCP23xPinUsed ( uint32_t gpio , uint32_t index = 0 ) ;
bool MCP23xPinUsed ( uint32_t gpio , uint32_t index ) {
return ( MCP23xPin ( gpio , index ) > = 0 ) ;
}
uint32_t MCP23xGetPin ( uint32_t lpin ) {
if ( lpin < Mcp23x . max_pins ) {
return Mcp23x_gpio_pin [ lpin ] ;
} else {
return GPIO_NONE ;
}
}
/*********************************************************************************************/
String MCP23xTemplateLoadFile ( void ) {
String mcptmplt = " " ;
# ifdef USE_UFILESYS
mcptmplt = TfsLoadString ( " /mcp23x.dat " ) ;
# endif // USE_UFILESYS
# ifdef USE_RULES
if ( ! mcptmplt . length ( ) ) {
mcptmplt = RuleLoadFile ( " MCP23X.DAT " ) ;
}
# endif // USE_RULES
# ifdef USE_SCRIPT
if ( ! mcptmplt . length ( ) ) {
mcptmplt = ScriptLoadSection ( " >y " ) ;
}
# endif // USE_SCRIPT
return mcptmplt ;
}
bool MCP23xLoadTemplate ( void ) {
String mcptmplt = MCP23xTemplateLoadFile ( ) ;
uint32_t len = mcptmplt . length ( ) + 1 ;
if ( len < 7 ) { return false ; } // No McpTmplt found
JsonParser parser ( ( char * ) mcptmplt . c_str ( ) ) ;
JsonParserObject root = parser . getRootObject ( ) ;
if ( ! root ) { return false ; }
2023-03-02 10:24:54 +00:00
// rule3 on file#mcp23x.dat do {"NAME":"MCP23017","GPIO":[32,33,34,35,36,37,38,39,224,225,226,227,228,229,230,231]} endon
// rule3 on file#mcp23x.dat do {"NAME":"MCP23017","GPIO":[263,262,261,260,259,258,257,256,32,33,34,35,36,37,38,39]} endon
// rule3 on file#mcp23x.dat do {"NAME":"MCP23017 A=Ri8-1, B=B1-8","GPIO":[263,262,261,260,259,258,257,256,32,33,34,35,36,37,38,39]} endon
// rule3 on file#mcp23x.dat do {"NAME":"MCP23017 A=Ri8-1, B=B1-8, C=Ri16-9, D=B9-16","GPIO":[263,262,261,260,259,258,257,256,32,33,34,35,36,37,38,39,271,270,269,268,267,266,265,264,40,41,42,43,44,45,46,47]} endon
2023-02-28 16:54:43 +00:00
2023-03-02 10:24:54 +00:00
// {"NAME":"MCP23017","GPIO":[32,33,34,35,36,37,38,39,224,225,226,227,228,229,230,231]}
// {"NAME":"MCP23017","GPIO":[32,33,34,35,36,37,38,39,224,225,226,227,228,229,230,231,40,41,42,43,44,45,46,47,232,233,234,235,236,237,238,239]}
2023-03-24 17:00:24 +00:00
JsonParserToken val = root [ PSTR ( D_JSON_BASE ) ] ;
2023-02-28 16:54:43 +00:00
if ( val ) {
2023-03-26 10:39:30 +01:00
Mcp23x . base = ( val . getUInt ( ) ) ? true : false ;
2023-03-24 17:00:24 +00:00
}
val = root [ PSTR ( D_JSON_NAME ) ] ;
if ( val ) {
AddLog ( LOG_LEVEL_DEBUG , PSTR ( " MCP: Base %d, Template '%s' " ) , Mcp23x . base , val . getStr ( ) ) ;
2023-02-28 16:54:43 +00:00
}
JsonParserArray arr = root [ PSTR ( D_JSON_GPIO ) ] ;
if ( arr ) {
uint32_t pin = 0 ;
for ( pin ; pin < Mcp23x . max_pins ; pin + + ) { // Max number of detected chip pins
JsonParserToken val = arr [ pin ] ;
if ( ! val ) { break ; }
uint16_t mpin = val . getUInt ( ) ;
if ( mpin ) { // Above GPIO_NONE
if ( ( mpin > = AGPIO ( GPIO_SWT1 ) ) & & ( mpin < ( AGPIO ( GPIO_SWT1 ) + MAX_SWITCHES_SET ) ) ) {
Mcp23x . switch_max + + ;
2023-03-02 10:24:54 +00:00
MCP23xSetPinModes ( pin , INPUT_PULLUP ) ;
2023-02-28 16:54:43 +00:00
}
else if ( ( mpin > = AGPIO ( GPIO_SWT1_NP ) ) & & ( mpin < ( AGPIO ( GPIO_SWT1_NP ) + MAX_SWITCHES_SET ) ) ) {
mpin - = ( AGPIO ( GPIO_SWT1_NP ) - AGPIO ( GPIO_SWT1 ) ) ;
Mcp23x . switch_max + + ;
2023-03-02 10:24:54 +00:00
MCP23xSetPinModes ( pin , INPUT ) ;
2023-02-28 16:54:43 +00:00
}
else if ( ( mpin > = AGPIO ( GPIO_KEY1 ) ) & & ( mpin < ( AGPIO ( GPIO_KEY1 ) + MAX_KEYS_SET ) ) ) {
Mcp23x . button_max + + ;
2023-03-02 10:24:54 +00:00
MCP23xSetPinModes ( pin , INPUT_PULLUP ) ;
2023-02-28 16:54:43 +00:00
}
else if ( ( mpin > = AGPIO ( GPIO_KEY1_NP ) ) & & ( mpin < ( AGPIO ( GPIO_KEY1_NP ) + MAX_KEYS_SET ) ) ) {
mpin - = ( AGPIO ( GPIO_KEY1_NP ) - AGPIO ( GPIO_KEY1 ) ) ;
Mcp23x . button_max + + ;
2023-03-02 10:24:54 +00:00
MCP23xSetPinModes ( pin , INPUT ) ;
2023-02-28 16:54:43 +00:00
}
else if ( ( mpin > = AGPIO ( GPIO_KEY1_INV ) ) & & ( mpin < ( AGPIO ( GPIO_KEY1_INV ) + MAX_KEYS_SET ) ) ) {
bitSet ( Mcp23x . button_inverted , mpin - AGPIO ( GPIO_KEY1_INV ) ) ;
mpin - = ( AGPIO ( GPIO_KEY1_INV ) - AGPIO ( GPIO_KEY1 ) ) ;
Mcp23x . button_max + + ;
2023-03-02 10:24:54 +00:00
MCP23xSetPinModes ( pin , INPUT_PULLUP ) ;
2023-02-28 16:54:43 +00:00
}
else if ( ( mpin > = AGPIO ( GPIO_KEY1_INV_NP ) ) & & ( mpin < ( AGPIO ( GPIO_KEY1_INV_NP ) + MAX_KEYS_SET ) ) ) {
bitSet ( Mcp23x . button_inverted , mpin - AGPIO ( GPIO_KEY1_INV_NP ) ) ;
mpin - = ( AGPIO ( GPIO_KEY1_INV_NP ) - AGPIO ( GPIO_KEY1 ) ) ;
Mcp23x . button_max + + ;
2023-03-02 10:24:54 +00:00
MCP23xSetPinModes ( pin , INPUT ) ;
2023-02-28 16:54:43 +00:00
}
else if ( ( mpin > = AGPIO ( GPIO_REL1 ) ) & & ( mpin < ( AGPIO ( GPIO_REL1 ) + MAX_RELAYS_SET ) ) ) {
Mcp23x . relay_max + + ;
MCP23xPinMode ( pin , OUTPUT ) ;
}
else if ( ( mpin > = AGPIO ( GPIO_REL1_INV ) ) & & ( mpin < ( AGPIO ( GPIO_REL1_INV ) + MAX_RELAYS_SET ) ) ) {
bitSet ( Mcp23x . relay_inverted , mpin - AGPIO ( GPIO_REL1_INV ) ) ;
mpin - = ( AGPIO ( GPIO_REL1_INV ) - AGPIO ( GPIO_REL1 ) ) ;
Mcp23x . relay_max + + ;
MCP23xPinMode ( pin , OUTPUT ) ;
}
2023-03-03 09:44:35 +00:00
else if ( mpin = = AGPIO ( GPIO_OUTPUT_HI ) ) {
MCP23xPinMode ( pin , OUTPUT ) ;
MCP23xDigitalWrite ( pin , 1 ) ;
}
else if ( mpin = = AGPIO ( GPIO_OUTPUT_LO ) ) {
MCP23xPinMode ( pin , OUTPUT ) ;
MCP23xDigitalWrite ( pin , 0 ) ;
}
2023-02-28 16:54:43 +00:00
else { mpin = 0 ; }
Mcp23x_gpio_pin [ pin ] = mpin ;
}
if ( ( Mcp23x . switch_max > = MAX_SWITCHES_SET ) | |
( Mcp23x . button_max > = MAX_KEYS_SET ) | |
( Mcp23x . relay_max > = MAX_RELAYS_SET ) ) {
AddLog ( LOG_LEVEL_INFO , PSTR ( " MCP: Max reached (S%d/B%d/R%d) " ) , Mcp23x . switch_max , Mcp23x . button_max , Mcp23x . relay_max ) ;
break ;
}
}
Mcp23x . max_pins = pin ; // Max number of configured pins
}
// AddLog(LOG_LEVEL_DEBUG, PSTR("MCP: Pins %d, Mcp23x_gpio_pin %*_V"), Mcp23x.max_pins, Mcp23x.max_pins, (uint8_t*)Mcp23x_gpio_pin);
return true ;
}
uint32_t MCP23xTemplateGpio ( void ) {
String mcptmplt = MCP23xTemplateLoadFile ( ) ;
uint32_t len = mcptmplt . length ( ) + 1 ;
if ( len < 7 ) { return 0 ; } // No McpTmplt found
JsonParser parser ( ( char * ) mcptmplt . c_str ( ) ) ;
JsonParserObject root = parser . getRootObject ( ) ;
if ( ! root ) { return 0 ; }
JsonParserArray arr = root [ PSTR ( D_JSON_GPIO ) ] ;
if ( arr . isArray ( ) ) {
return arr . size ( ) ; // Number of requested pins
}
return 0 ;
}
void MCP23xModuleInit ( void ) {
int32_t pins_needed = MCP23xTemplateGpio ( ) ;
if ( ! pins_needed ) {
AddLog ( LOG_LEVEL_DEBUG , PSTR ( " MCP: Invalid template " ) ) ;
return ;
}
2023-03-01 15:52:34 +00:00
# ifdef USE_SPI
if ( ( SPI_MOSI_MISO = = TasmotaGlobal . spi_enabled ) & & PinUsed ( GPIO_MCP23SXX_CS , GPIO_ANY ) ) {
2023-03-01 16:59:22 +00:00
# ifdef ESP8266
SPI . begin ( ) ;
# endif
# ifdef ESP32
2023-03-01 15:52:34 +00:00
SPI . begin ( Pin ( GPIO_SPI_CLK ) , Pin ( GPIO_SPI_MISO ) , Pin ( GPIO_SPI_MOSI ) , - 1 ) ;
2023-03-01 16:59:22 +00:00
# endif
2023-03-01 15:52:34 +00:00
while ( ( Mcp23x . max_devices < MCP23XXX_MAX_DEVICES ) & & PinUsed ( GPIO_MCP23SXX_CS , Mcp23x . max_devices ) ) {
2023-03-02 10:24:54 +00:00
Mcp23x . chip = Mcp23x . max_devices ;
Mcp23x . device [ Mcp23x . chip ] . pin_int = ( PinUsed ( GPIO_MCP23XXX_INT , Mcp23x . chip ) ) ? Pin ( GPIO_MCP23XXX_INT , Mcp23x . chip ) : - 1 ;
2023-03-01 15:52:34 +00:00
Mcp23x . device [ Mcp23x . chip ] . pin_cs = Pin ( GPIO_MCP23SXX_CS , Mcp23x . max_devices ) ;
digitalWrite ( Mcp23x . device [ Mcp23x . chip ] . pin_cs , 1 ) ;
pinMode ( Mcp23x . device [ Mcp23x . chip ] . pin_cs , OUTPUT ) ;
Mcp23x . device [ Mcp23x . chip ] . interface = MCP23X_SPI ;
Mcp23x . device [ Mcp23x . chip ] . address = MCP23XXX_ADDR_START < < 1 ;
2024-03-18 09:18:14 +00:00
MCP23xWrite ( MCP23X08_IOCON , 0x80 ) ; // Attempt to set bank mode - this will only work on MCP23x17, so its the best way to detect the different chips 23x08 vs 23x17
uint8_t buffer ;
if ( MCP23xValidRead ( MCP23X08_IOCON , & buffer ) ) {
if ( 0x00 = = buffer ) { // MCP23S08
AddLog ( LOG_LEVEL_INFO , PSTR ( " SPI: MCP23S08 found at CS%d " ) , Mcp23x . chip + 1 ) ;
Mcp23x . device [ Mcp23x . chip ] . pins = 8 ;
MCP23xWrite ( MCP23X08_IOCON , 0 b00011000 ) ; // Enable INT mirror, Slew rate disabled, HAEN pins for addressing
Mcp23x . device [ Mcp23x . chip ] . olata = MCP23xRead ( MCP23X08_OLAT ) ;
} else if ( 0x80 = = buffer ) { // MCP23S17
AddLog ( LOG_LEVEL_INFO , PSTR ( " SPI: MCP23S17 found at CS%d " ) , Mcp23x . chip + 1 ) ;
Mcp23x . device [ Mcp23x . chip ] . pins = 16 ;
MCP23xWrite ( MCP23X17_IOCONA , 0 b01011000 ) ; // Enable INT mirror, Slew rate disabled, HAEN pins for addressing
Mcp23x . device [ Mcp23x . chip ] . olata = MCP23xRead ( MCP23X17_OLATA ) ;
Mcp23x . device [ Mcp23x . chip ] . olatb = MCP23xRead ( MCP23X17_OLATB ) ;
}
}
2023-03-01 15:52:34 +00:00
Mcp23x . max_devices + + ;
Mcp23x . max_pins + = Mcp23x . device [ Mcp23x . chip ] . pins ;
pins_needed - = Mcp23x . device [ Mcp23x . chip ] . pins ;
if ( ! pins_needed ) { break ; }
}
} else {
# endif // USE_SPI
2023-03-02 10:24:54 +00:00
# ifdef USE_I2C
2023-03-01 15:52:34 +00:00
uint8_t mcp23xxx_address = MCP23XXX_ADDR_START ;
while ( ( Mcp23x . max_devices < MCP23XXX_MAX_DEVICES ) & & ( mcp23xxx_address < MCP23XXX_ADDR_END ) ) {
Mcp23x . chip = Mcp23x . max_devices ;
if ( I2cSetDevice ( mcp23xxx_address ) ) {
2023-03-02 10:24:54 +00:00
Mcp23x . device [ Mcp23x . chip ] . pin_int = ( PinUsed ( GPIO_MCP23XXX_INT , Mcp23x . chip ) ) ? Pin ( GPIO_MCP23XXX_INT , Mcp23x . chip ) : - 1 ;
2023-03-01 15:52:34 +00:00
Mcp23x . device [ Mcp23x . chip ] . interface = MCP23X_I2C ;
Mcp23x . device [ Mcp23x . chip ] . address = mcp23xxx_address ;
2024-03-18 09:18:14 +00:00
MCP23xWrite ( MCP23X08_IOCON , 0x80 ) ; // Attempt to set bank mode - this will only work on MCP23x17, so its the best way to detect the different chips 23x08 vs 23x17
2023-03-01 15:52:34 +00:00
uint8_t buffer ;
if ( MCP23xValidRead ( MCP23X08_IOCON , & buffer ) ) {
if ( 0x00 = = buffer ) {
I2cSetActiveFound ( mcp23xxx_address , " MCP23008 " ) ;
Mcp23x . device [ Mcp23x . chip ] . pins = 8 ;
2023-03-03 09:44:35 +00:00
MCP23xWrite ( MCP23X08_IOCON , 0 b00011000 ) ; // Slew rate disabled, HAEN pins for addressing
Mcp23x . device [ Mcp23x . chip ] . olata = MCP23xRead ( MCP23X08_OLAT ) ;
2023-03-01 15:52:34 +00:00
Mcp23x . max_devices + + ;
}
else if ( 0x80 = = buffer ) {
I2cSetActiveFound ( mcp23xxx_address , " MCP23017 " ) ;
Mcp23x . device [ Mcp23x . chip ] . pins = 16 ;
MCP23xWrite ( MCP23X08_IOCON , 0x00 ) ; // Reset bank mode to 0 (MCP23X17_GPINTENB)
MCP23xWrite ( MCP23X17_IOCONA , 0 b01011000 ) ; // Enable INT mirror, Slew rate disabled, HAEN pins for addressing
Mcp23x . device [ Mcp23x . chip ] . olata = MCP23xRead ( MCP23X17_OLATA ) ;
Mcp23x . device [ Mcp23x . chip ] . olatb = MCP23xRead ( MCP23X17_OLATB ) ;
Mcp23x . max_devices + + ;
}
Mcp23x . max_pins + = Mcp23x . device [ Mcp23x . chip ] . pins ;
pins_needed - = Mcp23x . device [ Mcp23x . chip ] . pins ;
2023-02-28 16:54:43 +00:00
}
2023-03-01 15:52:34 +00:00
}
if ( pins_needed ) {
mcp23xxx_address + + ;
} else {
mcp23xxx_address = MCP23XXX_ADDR_END ;
2023-02-28 16:54:43 +00:00
}
}
2023-03-02 10:24:54 +00:00
# endif // USE_I2C
2023-03-01 15:52:34 +00:00
# ifdef USE_SPI
2023-02-28 16:54:43 +00:00
}
2023-03-01 15:52:34 +00:00
# endif // USE_SPI
2023-02-28 16:54:43 +00:00
if ( ! Mcp23x . max_devices ) { return ; }
Mcp23x_gpio_pin = ( uint16_t * ) calloc ( Mcp23x . max_pins , 2 ) ;
if ( ! Mcp23x_gpio_pin ) { return ; }
if ( ! MCP23xLoadTemplate ( ) ) {
AddLog ( LOG_LEVEL_INFO , PSTR ( " MCP: No valid template found " ) ) ; // Too many GPIO's
Mcp23x . max_devices = 0 ;
return ;
}
Mcp23x . relay_offset = TasmotaGlobal . devices_present ;
Mcp23x . relay_max - = UpdateDevicesPresent ( Mcp23x . relay_max ) ;
Mcp23x . button_offset = - 1 ;
Mcp23x . switch_offset = - 1 ;
}
void MCP23xServiceInput ( void ) {
2023-03-02 10:24:54 +00:00
// I found no reliable way to receive interrupts; noise received at undefined moments - unstable usage
2023-03-03 09:44:35 +00:00
Mcp23x . interrupt = false ;
2023-02-28 16:54:43 +00:00
// This works with no interrupt
uint32_t pin_offset = 0 ;
2023-03-03 09:44:35 +00:00
uint32_t gpio ;
2023-02-28 16:54:43 +00:00
for ( Mcp23x . chip = 0 ; Mcp23x . chip < Mcp23x . max_devices ; Mcp23x . chip + + ) {
2023-03-03 09:44:35 +00:00
if ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) {
2024-03-18 09:18:14 +00:00
gpio = MCP23xRead ( MCP23X08_GPIO ) ; // Read MCP23x08 gpio
2023-03-03 09:44:35 +00:00
} else {
gpio = MCP23xRead16 ( MCP23X17_GPIOA ) ; // Read MCP23x17 gpio
}
2023-02-28 16:54:43 +00:00
// AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("MCP: Chip %d, State %04X"), Mcp23x.chip, gpio);
uint32_t mask = 1 ;
for ( uint32_t pin = 0 ; pin < Mcp23x . device [ Mcp23x . chip ] . pins ; pin + + ) {
uint32_t state = ( ( gpio & mask ) ! = 0 ) ;
uint32_t lpin = MCP23xGetPin ( pin_offset + pin ) ; // 0 for None, 32 for KEY1, 160 for SWT1, 224 for REL1
uint32_t index = lpin & 0x001F ; // Max 32 buttons or switches
lpin = BGPIO ( lpin ) ; // UserSelectablePins number
if ( GPIO_KEY1 = = lpin ) {
ButtonSetVirtualPinState ( Mcp23x . button_offset + index , ( state ! = bitRead ( Mcp23x . button_inverted , index ) ) ) ;
}
else if ( GPIO_SWT1 = = lpin ) {
SwitchSetVirtualPinState ( Mcp23x . switch_offset + index , state ) ;
}
mask < < = 1 ;
}
pin_offset + = Mcp23x . device [ Mcp23x . chip ] . pins ;
}
}
2023-03-04 14:06:52 +00:00
static void IRAM_ATTR MCP23xInputIsr ( void ) {
2023-03-03 09:44:35 +00:00
Mcp23x . interrupt = true ;
2023-03-02 10:24:54 +00:00
}
void MCP23xInit ( void ) {
if ( Mcp23x . button_max | | Mcp23x . switch_max ) {
2023-03-03 09:44:35 +00:00
uint32_t gpio ;
2023-03-02 10:24:54 +00:00
for ( Mcp23x . chip = 0 ; Mcp23x . chip < Mcp23x . max_devices ; Mcp23x . chip + + ) {
if ( Mcp23x . device [ Mcp23x . chip ] . pin_int > - 1 ) {
2023-03-03 09:44:35 +00:00
if ( 8 = = Mcp23x . device [ Mcp23x . chip ] . pins ) {
2024-03-18 09:18:14 +00:00
gpio = MCP23xRead ( MCP23X08_GPIO ) ; // Clear MCP23x08 interrupt
2023-03-03 09:44:35 +00:00
} else {
gpio = MCP23xRead16 ( MCP23X17_GPIOA ) ; // Clear MCP23x17 interrupt
}
2023-03-03 15:54:57 +00:00
pinMode ( Mcp23x . device [ Mcp23x . chip ] . pin_int , INPUT_PULLUP ) ;
2023-03-02 10:24:54 +00:00
attachInterrupt ( Mcp23x . device [ Mcp23x . chip ] . pin_int , MCP23xInputIsr , CHANGE ) ;
}
}
}
}
2023-02-28 16:54:43 +00:00
void MCP23xPower ( void ) {
2023-03-25 16:50:23 +00:00
// XdrvMailbox.index = 32-bit rpower bit mask
2023-03-26 10:39:30 +01:00
// Use absolute relay indexes unique with main template
2023-03-25 16:50:23 +00:00
power_t rpower = XdrvMailbox . index ;
uint32_t relay_max = TasmotaGlobal . devices_present ;
2023-03-26 10:39:30 +01:00
if ( ! Mcp23x . base ) {
// Use relative and sequential relay indexes
2023-03-25 16:50:23 +00:00
rpower > > = Mcp23x . relay_offset ;
relay_max = Mcp23x . relay_max ;
}
for ( uint32_t index = 0 ; index < relay_max ; index + + ) {
2023-02-28 16:54:43 +00:00
power_t state = rpower & 1 ;
if ( MCP23xPinUsed ( GPIO_REL1 , index ) ) {
uint32_t pin = MCP23xPin ( GPIO_REL1 , index ) & 0x3F ; // Fix possible overflow over 63 gpios
MCP23xDigitalWrite ( pin , bitRead ( Mcp23x . relay_inverted , index ) ? ! state : state ) ;
}
rpower > > = 1 ; // Select next power
}
}
bool MCP23xAddButton ( void ) {
// XdrvMailbox.index = button/switch index
2023-03-24 17:00:24 +00:00
uint32_t index = XdrvMailbox . index ;
2023-03-26 10:39:30 +01:00
if ( ! Mcp23x . base ) {
// Use relative and sequential button indexes
2023-03-24 17:00:24 +00:00
if ( Mcp23x . button_offset < 0 ) { Mcp23x . button_offset = index ; }
index - = Mcp23x . button_offset ;
if ( index > = Mcp23x . button_max ) { return false ; }
2023-03-25 16:50:23 +00:00
} else {
2023-03-26 10:39:30 +01:00
// Use absolute button indexes unique with main template
2023-03-25 17:15:24 +00:00
if ( ! MCP23xPinUsed ( GPIO_KEY1 , index ) ) { return false ; }
2023-03-25 16:50:23 +00:00
Mcp23x . button_offset = 0 ;
2023-03-24 17:00:24 +00:00
}
2023-02-28 16:54:43 +00:00
XdrvMailbox . index = ( MCP23xDigitalRead ( MCP23xPin ( GPIO_KEY1 , index ) ) ! = bitRead ( Mcp23x . button_inverted , index ) ) ;
return true ;
}
bool MCP23xAddSwitch ( void ) {
// XdrvMailbox.index = button/switch index
2023-03-24 17:00:24 +00:00
uint32_t index = XdrvMailbox . index ;
2023-03-26 10:39:30 +01:00
if ( ! Mcp23x . base ) {
// Use relative and sequential switch indexes
2023-03-24 17:00:24 +00:00
if ( Mcp23x . switch_offset < 0 ) { Mcp23x . switch_offset = index ; }
index - = Mcp23x . switch_offset ;
if ( index > = Mcp23x . switch_max ) { return false ; }
2023-03-25 16:50:23 +00:00
} else {
2023-03-26 10:39:30 +01:00
// Use absolute switch indexes unique with main template
2023-03-25 17:15:24 +00:00
if ( ! MCP23xPinUsed ( GPIO_SWT1 , index ) ) { return false ; }
2023-03-25 16:50:23 +00:00
Mcp23x . switch_offset = 0 ;
2023-03-24 17:00:24 +00:00
}
2023-02-28 16:54:43 +00:00
XdrvMailbox . index = MCP23xDigitalRead ( MCP23xPin ( GPIO_SWT1 , index ) ) ;
return true ;
}
/*********************************************************************************************\
* Interface
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
bool Xdrv67 ( uint32_t function ) {
2023-03-01 15:52:34 +00:00
bool spi_enabled = false ;
bool i2c_enabled = false ;
# ifdef USE_SPI
spi_enabled = ( SPI_MOSI_MISO = = TasmotaGlobal . spi_enabled ) ;
# endif // USE_SPI
# ifdef USE_I2C
i2c_enabled = I2cEnabled ( XI2C_77 ) ;
# endif // USE_I2C
if ( ! spi_enabled & & ! i2c_enabled ) { return false ; }
2023-02-28 16:54:43 +00:00
bool result = false ;
2023-03-11 14:52:02 +00:00
if ( FUNC_SETUP_RING2 = = function ) {
2023-02-28 16:54:43 +00:00
MCP23xModuleInit ( ) ;
} else if ( Mcp23x . max_devices ) {
switch ( function ) {
2023-03-02 10:24:54 +00:00
case FUNC_LOOP :
case FUNC_SLEEP_LOOP :
if ( ! Mcp23x . interrupt ) { return false ; }
AddLog ( LOG_LEVEL_DEBUG_MORE , PSTR ( " MCP: Interrupt " ) ) ;
MCP23xServiceInput ( ) ;
break ;
2023-02-28 16:54:43 +00:00
case FUNC_EVERY_100_MSECOND :
if ( Mcp23x . button_max | | Mcp23x . switch_max ) {
MCP23xServiceInput ( ) ;
}
break ;
case FUNC_SET_POWER :
MCP23xPower ( ) ;
break ;
2023-03-02 10:24:54 +00:00
case FUNC_INIT :
MCP23xInit ( ) ;
break ;
2023-02-28 16:54:43 +00:00
case FUNC_ADD_BUTTON :
result = MCP23xAddButton ( ) ;
break ;
case FUNC_ADD_SWITCH :
result = MCP23xAddSwitch ( ) ;
break ;
2023-12-27 21:03:56 +00:00
case FUNC_ACTIVE :
result = true ;
break ;
2023-02-28 16:54:43 +00:00
}
}
return result ;
}
# endif // USE_MCP23XXX_DRV
# endif // USE_I2C or USE_ESP_SPI
