Tasmota/sonoff/support_rotary.ino

154 lines
4.5 KiB
Arduino
Raw Normal View History

2019-01-11 00:50:40 +00:00
/*
support_rotary.ino - rotary switch support for Sonoff-Tasmota
Copyright (C) 2019 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define ROTARY_V1
#ifdef ROTARY_V1
/*********************************************************************************************\
* Rotary support
\*********************************************************************************************/
unsigned long rotary_debounce = 0; // Rotary debounce timer
uint8_t rotaries_found = 0;
uint8_t rotary_state = 0;
uint8_t rotary_position = 128;
uint8_t rotary_last_position = 128;
uint8_t interrupts_in_use = 0;
uint8_t rotary_changed = 0;
2019-01-11 00:50:40 +00:00
/********************************************************************************************/
void update_position(void)
{
2019-01-11 00:50:40 +00:00
uint8_t s;
/*
* https://github.com/PaulStoffregen/Encoder/blob/master/Encoder.h
*/
s = rotary_state & 3;
if (digitalRead(pin[GPIO_ROT_A])) s |= 4;
if (digitalRead(pin[GPIO_ROT_B])) s |= 8;
switch (s) {
case 0: case 5: case 10: case 15:
break;
case 1: case 7: case 8: case 14:
rotary_position++; break;
case 2: case 4: case 11: case 13:
rotary_position--; break;
case 3: case 12:
rotary_position = rotary_position + 2; break;
default:
rotary_position = rotary_position - 2; break;
}
rotary_state = (s >> 2);
}
void update_rotary(void)
{
2019-01-11 00:50:40 +00:00
if (MI_DESK_LAMP == Settings.module){
if (light_power) {
update_position();
}
}
}
void RotaryInit(void)
{
rotaries_found = 0;
2019-01-11 11:12:08 +00:00
if ((pin[GPIO_ROT_A] < 99) && (pin[GPIO_ROT_B] < 99)) {
2019-01-11 00:50:40 +00:00
rotaries_found++;
pinMode(pin[GPIO_ROT_A], INPUT_PULLUP);
pinMode(pin[GPIO_ROT_B], INPUT_PULLUP);
// GPIO6-GPIO11 are typically used to interface with the flash memory IC on
// most esp8266 modules, so we should avoid adding interrupts to these pins.
2019-01-11 11:12:08 +00:00
if ((pin[GPIO_ROT_A] < 6) || (pin[GPIO_ROT_A] > 11)) {
2019-01-11 00:50:40 +00:00
attachInterrupt(digitalPinToInterrupt(pin[GPIO_ROT_A]), update_rotary, CHANGE);
interrupts_in_use++;
}
2019-01-11 11:12:08 +00:00
if ((pin[GPIO_ROT_B] < 6) || (pin[GPIO_ROT_B] > 11)) {
2019-01-11 00:50:40 +00:00
attachInterrupt(digitalPinToInterrupt(pin[GPIO_ROT_B]), update_rotary, CHANGE);
interrupts_in_use++;
}
}
}
/*********************************************************************************************\
* Rotary handler
\*********************************************************************************************/
void RotaryHandler(void)
{
if (interrupts_in_use < 2) {
noInterrupts();
update_rotary();
} else {
noInterrupts();
}
if (rotary_last_position != rotary_position) {
if (MI_DESK_LAMP == Settings.module) { // Mi Desk lamp
if (holdbutton[0]) {
rotary_changed = 1;
// button1 is pressed: set color temperature
int16_t t = LightGetColorTemp();
t = t + (rotary_position - rotary_last_position);
if (t < 153) {
t = 153;
}
if (t > 500) {
t = 500;
}
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_CMND_COLORTEMPERATURE " %d"), rotary_position - rotary_last_position);
AddLog(LOG_LEVEL_DEBUG);
LightSetColorTemp((uint16_t)t);
} else {
int8_t d = Settings.light_dimmer;
d = d + (rotary_position - rotary_last_position);
if (d < 1) {
d = 1;
}
if (d > 100) {
d = 100;
}
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_CMND_DIMMER " %d"), rotary_position - rotary_last_position);
AddLog(LOG_LEVEL_DEBUG);
LightSetDimmer((uint8_t)d);
Settings.light_dimmer = d;
2019-01-11 00:50:40 +00:00
}
}
rotary_last_position = 128;
rotary_position = 128;
2019-01-11 00:50:40 +00:00
}
interrupts();
2019-01-11 00:50:40 +00:00
}
void RotaryLoop(void)
{
if (rotaries_found) {
if (TimeReached(rotary_debounce)) {
2019-01-11 13:59:51 +00:00
SetNextTimeInterval(rotary_debounce, Settings.button_debounce); // Using button_debounce setting for this as well
2019-01-11 00:50:40 +00:00
RotaryHandler();
}
}
}
#endif // ROTARY_V1