Tasmota/sonoff/xdrv_23_zigbee_constants.ino

408 lines
12 KiB
Arduino
Raw Normal View History

/*
xdrv_23_zigbee_constants.ino - zigbee support for Sonoff-Tasmota
Copyright (C) 2019 Theo Arends and Stephan Hadinger
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_ZIGBEE
typedef uint64_t Z_IEEEAddress;
typedef uint16_t Z_ShortAddress;
enum ZnpCommandType {
Z_POLL = 0x00,
Z_SREQ = 0x20,
Z_AREQ = 0x40,
Z_SRSP = 0x60
};
enum ZnpSubsystem {
Z_RPC_Error = 0x00,
Z_SYS = 0x01,
Z_MAC = 0x02,
Z_NWK = 0x03,
Z_AF = 0x04,
Z_ZDO = 0x05,
Z_SAPI = 0x06,
Z_UTIL = 0x07,
Z_DEBUG = 0x08,
Z_APP = 0x09
};
// Commands in the SYS subsystem
enum SysCommand {
SYS_RESET = 0x00,
SYS_PING = 0x01,
SYS_VERSION = 0x02,
SYS_SET_EXTADDR = 0x03,
SYS_GET_EXTADDR = 0x04,
SYS_RAM_READ = 0x05,
SYS_RAM_WRITE = 0x06,
SYS_OSAL_NV_ITEM_INIT = 0x07,
SYS_OSAL_NV_READ = 0x08,
SYS_OSAL_NV_WRITE = 0x09,
SYS_OSAL_START_TIMER = 0x0A,
SYS_OSAL_STOP_TIMER = 0x0B,
SYS_RANDOM = 0x0C,
SYS_ADC_READ = 0x0D,
SYS_GPIO = 0x0E,
SYS_STACK_TUNE = 0x0F,
SYS_SET_TIME = 0x10,
SYS_GET_TIME = 0x11,
SYS_OSAL_NV_DELETE = 0x12,
SYS_OSAL_NV_LENGTH = 0x13,
SYS_TEST_RF = 0x40,
SYS_TEST_LOOPBACK = 0x41,
SYS_RESET_IND = 0x80,
SYS_OSAL_TIMER_EXPIRED = 0x81,
};
// Commands in the SAPI subsystem
enum SapiCommand {
SAPI_START_REQUEST = 0x00,
SAPI_BIND_DEVICE = 0x01,
SAPI_ALLOW_BIND = 0x02,
SAPI_SEND_DATA_REQUEST = 0x03,
SAPI_READ_CONFIGURATION = 0x04,
SAPI_WRITE_CONFIGURATION = 0x05,
SAPI_GET_DEVICE_INFO = 0x06,
SAPI_FIND_DEVICE_REQUEST = 0x07,
SAPI_PERMIT_JOINING_REQUEST = 0x08,
SAPI_SYSTEM_RESET = 0x09,
SAPI_START_CONFIRM = 0x80,
SAPI_BIND_CONFIRM = 0x81,
SAPI_ALLOW_BIND_CONFIRM = 0x82,
SAPI_SEND_DATA_CONFIRM = 0x83,
SAPI_FIND_DEVICE_CONFIRM = 0x85,
SAPI_RECEIVE_DATA_INDICATION = 0x87,
};
enum Z_configuration {
CONF_EXTADDR = 0x01,
CONF_BOOTCOUNTER = 0x02,
CONF_STARTUP_OPTION = 0x03,
CONF_START_DELAY = 0x04,
CONF_NIB = 0x21,
CONF_DEVICE_LIST = 0x22,
CONF_ADDRMGR = 0x23,
CONF_POLL_RATE = 0x24,
CONF_QUEUED_POLL_RATE = 0x25,
CONF_RESPONSE_POLL_RATE = 0x26,
CONF_REJOIN_POLL_RATE = 0x27,
CONF_DATA_RETRIES = 0x28,
CONF_POLL_FAILURE_RETRIES = 0x29,
CONF_STACK_PROFILE = 0x2A,
CONF_INDIRECT_MSG_TIMEOUT = 0x2B,
CONF_ROUTE_EXPIRY_TIME = 0x2C,
CONF_EXTENDED_PAN_ID = 0x2D,
CONF_BCAST_RETRIES = 0x2E,
CONF_PASSIVE_ACK_TIMEOUT = 0x2F,
CONF_BCAST_DELIVERY_TIME = 0x30,
CONF_NWK_MODE = 0x31,
CONF_CONCENTRATOR_ENABLE = 0x32,
CONF_CONCENTRATOR_DISCOVERY = 0x33,
CONF_CONCENTRATOR_RADIUS = 0x34,
CONF_CONCENTRATOR_RC = 0x36,
CONF_NWK_MGR_MODE = 0x37,
CONF_SRC_RTG_EXPIRY_TIME = 0x38,
CONF_ROUTE_DISCOVERY_TIME = 0x39,
CONF_NWK_ACTIVE_KEY_INFO = 0x3A,
CONF_NWK_ALTERN_KEY_INFO = 0x3B,
CONF_ROUTER_OFF_ASSOC_CLEANUP = 0x3C,
CONF_NWK_LEAVE_REQ_ALLOWED = 0x3D,
CONF_NWK_CHILD_AGE_ENABLE = 0x3E,
CONF_DEVICE_LIST_KA_TIMEOUT = 0x3F,
CONF_BINDING_TABLE = 0x41,
CONF_GROUP_TABLE = 0x42,
CONF_APS_FRAME_RETRIES = 0x43,
CONF_APS_ACK_WAIT_DURATION = 0x44,
CONF_APS_ACK_WAIT_MULTIPLIER = 0x45,
CONF_BINDING_TIME = 0x46,
CONF_APS_USE_EXT_PANID = 0x47,
CONF_APS_USE_INSECURE_JOIN = 0x48,
CONF_COMMISSIONED_NWK_ADDR = 0x49,
CONF_APS_NONMEMBER_RADIUS = 0x4B,
CONF_APS_LINK_KEY_TABLE = 0x4C,
CONF_APS_DUPREJ_TIMEOUT_INC = 0x4D,
CONF_APS_DUPREJ_TIMEOUT_COUNT = 0x4E,
CONF_APS_DUPREJ_TABLE_SIZE = 0x4F,
CONF_DIAGNOSTIC_STATS = 0x50,
CONF_SECURITY_LEVEL = 0x61,
CONF_PRECFGKEY = 0x62,
CONF_PRECFGKEYS_ENABLE = 0x63,
CONF_SECURITY_MODE = 0x64,
CONF_SECURE_PERMIT_JOIN = 0x65,
CONF_APS_LINK_KEY_TYPE = 0x66,
CONF_APS_ALLOW_R19_SECURITY = 0x67,
CONF_IMPLICIT_CERTIFICATE = 0x69,
CONF_DEVICE_PRIVATE_KEY = 0x6A,
CONF_CA_PUBLIC_KEY = 0x6B,
CONF_KE_MAX_DEVICES = 0x6C,
CONF_USE_DEFAULT_TCLK = 0x6D,
CONF_RNG_COUNTER = 0x6F,
CONF_RANDOM_SEED = 0x70,
CONF_TRUSTCENTER_ADDR = 0x71,
CONF_USERDESC = 0x81,
CONF_NWKKEY = 0x82,
CONF_PANID = 0x83,
CONF_CHANLIST = 0x84,
CONF_LEAVE_CTRL = 0x85,
CONF_SCAN_DURATION = 0x86,
CONF_LOGICAL_TYPE = 0x87,
CONF_NWKMGR_MIN_TX = 0x88,
CONF_NWKMGR_ADDR = 0x89,
CONF_ZDO_DIRECT_CB = 0x8F,
CONF_TCLK_TABLE_START = 0x0101,
ZNP_HAS_CONFIGURED = 0xF00
};
// enum Z_nvItemIds {
// SCENE_TABLE = 145,
// MIN_FREE_NWK_ADDR = 146,
// MAX_FREE_NWK_ADDR = 147,
// MIN_FREE_GRP_ID = 148,
// MAX_FREE_GRP_ID = 149,
// MIN_GRP_IDS = 150,
// MAX_GRP_IDS = 151,
// OTA_BLOCK_REQ_DELAY = 152,
// SAPI_ENDPOINT = 161,
// SAS_SHORT_ADDR = 177,
// SAS_EXT_PANID = 178,
// SAS_PANID = 179,
// SAS_CHANNEL_MASK = 180,
// SAS_PROTOCOL_VER = 181,
// SAS_STACK_PROFILE = 182,
// SAS_STARTUP_CTRL = 183,
// SAS_TC_ADDR = 193,
// SAS_TC_MASTER_KEY = 194,
// SAS_NWK_KEY = 195,
// SAS_USE_INSEC_JOIN = 196,
// SAS_PRECFG_LINK_KEY = 197,
// SAS_NWK_KEY_SEQ_NUM = 198,
// SAS_NWK_KEY_TYPE = 199,
// SAS_NWK_MGR_ADDR = 200,
// SAS_CURR_TC_MASTER_KEY = 209,
// SAS_CURR_NWK_KEY = 210,
// SAS_CURR_PRECFG_LINK_KEY = 211,
// TCLK_TABLE_START = 257,
// TCLK_TABLE_END = 511,
// APS_LINK_KEY_DATA_START = 513,
// APS_LINK_KEY_DATA_END = 767,
// DUPLICATE_BINDING_TABLE = 768,
// DUPLICATE_DEVICE_LIST = 769,
// DUPLICATE_DEVICE_LIST_KA_TIMEOUT = 770,
//};
//
enum Z_Status {
Z_Success = 0x00,
Z_Failure = 0x01,
Z_InvalidParameter = 0x02,
Z_MemError = 0x03,
Z_Created = 0x09,
Z_BufferFull = 0x11
};
enum Z_App_Profiles {
Z_PROF_IPM = 0x0101, // Industrial Plant Monitoring
Z_PROF_HA = 0x0104, // Home Automation -- the only supported right now
Z_PROF_CBA = 0x0105, // Commercial Building Automation
Z_PROF_TA = 0x0107, // Telecom Applications
Z_PROF_PHHC = 0x0108, // Personal Home & Hospital Care
Z_PROF_AMI = 0x0109, // Advanced Metering Initiative
};
enum Z_Device_Ids {
Z_DEVID_CONF_TOOL = 0x0005,
// from https://www.rfwireless-world.com/Terminology/Zigbee-Profile-ID-list.html
// Generic 0x0000 ON/OFF Switch
// 0x0001 Level Control Switch
// 0x0002 ON/OFF Output
// 0x0003 Level Controllable Output
// 0x0004 Scene Selector
// 0x0005 Configuration Tool
// 0x0006 Remote control
// 0x0007 Combined Interface
// 0x0008 Range Extender
// 0x0009 Mains Power Outlet
// Lighting 0x0100 ON/OFF Light
// 0x0101 Dimmable Light
// 0x0102 Color Dimmable Light
// 0x0103 ON/OFF Light Switch
// 0x0104 Dimmer Switch
// 0x0105 Color Dimmer Switch
// 0x0106 Light Sensor
// 0x0107 Occupancy Sensor
// Closures 0x0200 Shade
// 0x0201 Shade Controller
// HVAC 0x0300 Heating/Cooling Unit
// 0x0301 Thermostat
// 0x0302 Temperature Sensor
// 0x0303 Pump
// 0x0304 Pump Controller
// 0x0305 Pressure Sensor
// 0x0306 Flow sensor
// Intruder Alarm Systems 0x0400 IAS Control and Indicating Equipment
// 0x0401 IAS Ancillary Control Equipment
// 0x0402 IAS Zone
// 0x0403 IAS Warning Device
};
// enum class AddrMode : uint8_t {
// NotPresent = 0,
// Group = 1,
// ShortAddress = 2,
// IEEEAddress = 3,
// Broadcast = 0xFF
// };
//
//
//
// Commands in the AF subsystem
enum AfCommand : uint8_t {
AF_REGISTER = 0x00,
AF_DATA_REQUEST = 0x01,
AF_DATA_REQUEST_EXT = 0x02,
AF_DATA_REQUEST_SRC_RTG = 0x03,
AF_INTER_PAN_CTL = 0x10,
AF_DATA_STORE = 0x11,
AF_DATA_RETRIEVE = 0x12,
AF_APSF_CONFIG_SET = 0x13,
AF_DATA_CONFIRM = 0x80,
AF_REFLECT_ERROR = 0x83,
AF_INCOMING_MSG = 0x81,
AF_INCOMING_MSG_EXT = 0x82
};
//
// Commands in the ZDO subsystem
enum : uint8_t {
ZDO_NWK_ADDR_REQ = 0x00,
ZDO_IEEE_ADDR_REQ = 0x01,
ZDO_NODE_DESC_REQ = 0x02,
ZDO_POWER_DESC_REQ = 0x03,
ZDO_SIMPLE_DESC_REQ = 0x04,
ZDO_ACTIVE_EP_REQ = 0x05,
ZDO_MATCH_DESC_REQ = 0x06,
ZDO_COMPLEX_DESC_REQ = 0x07,
ZDO_USER_DESC_REQ = 0x08,
ZDO_DEVICE_ANNCE = 0x0A,
ZDO_USER_DESC_SET = 0x0B,
ZDO_SERVER_DISC_REQ = 0x0C,
ZDO_END_DEVICE_BIND_REQ = 0x20,
ZDO_BIND_REQ = 0x21,
ZDO_UNBIND_REQ = 0x22,
ZDO_SET_LINK_KEY = 0x23,
ZDO_REMOVE_LINK_KEY = 0x24,
ZDO_GET_LINK_KEY = 0x25,
ZDO_MGMT_NWK_DISC_REQ = 0x30,
ZDO_MGMT_LQI_REQ = 0x31,
ZDO_MGMT_RTQ_REQ = 0x32,
ZDO_MGMT_BIND_REQ = 0x33,
ZDO_MGMT_LEAVE_REQ = 0x34,
ZDO_MGMT_DIRECT_JOIN_REQ = 0x35,
ZDO_MGMT_PERMIT_JOIN_REQ = 0x36,
ZDO_MGMT_NWK_UPDATE_REQ = 0x37,
ZDO_MSG_CB_REGISTER = 0x3E,
ZDO_MGS_CB_REMOVE = 0x3F,
ZDO_STARTUP_FROM_APP = 0x40,
ZDO_AUTO_FIND_DESTINATION = 0x41,
ZDO_EXT_REMOVE_GROUP = 0x47,
ZDO_EXT_REMOVE_ALL_GROUP = 0x48,
ZDO_EXT_FIND_ALL_GROUPS_ENDPOINT = 0x49,
ZDO_EXT_FIND_GROUP = 0x4A,
ZDO_EXT_ADD_GROUP = 0x4B,
ZDO_EXT_COUNT_ALL_GROUPS = 0x4C,
ZDO_NWK_ADDR_RSP = 0x80,
ZDO_IEEE_ADDR_RSP = 0x81,
ZDO_NODE_DESC_RSP = 0x82,
ZDO_POWER_DESC_RSP = 0x83,
ZDO_SIMPLE_DESC_RSP = 0x84,
ZDO_ACTIVE_EP_RSP = 0x85,
ZDO_MATCH_DESC_RSP = 0x86,
ZDO_COMPLEX_DESC_RSP = 0x87,
ZDO_USER_DESC_RSP = 0x88,
ZDO_USER_DESC_CONF = 0x89,
ZDO_SERVER_DISC_RSP = 0x8A,
ZDO_END_DEVICE_BIND_RSP = 0xA0,
ZDO_BIND_RSP = 0xA1,
ZDO_UNBIND_RSP = 0xA2,
ZDO_MGMT_NWK_DISC_RSP = 0xB0,
ZDO_MGMT_LQI_RSP = 0xB1,
ZDO_MGMT_RTG_RSP = 0xB2,
ZDO_MGMT_BIND_RSP = 0xB3,
ZDO_MGMT_LEAVE_RSP = 0xB4,
ZDO_MGMT_DIRECT_JOIN_RSP = 0xB5,
ZDO_MGMT_PERMIT_JOIN_RSP = 0xB6,
ZDO_STATE_CHANGE_IND = 0xC0,
ZDO_END_DEVICE_ANNCE_IND = 0xC1,
ZDO_MATCH_DESC_RSP_SENT = 0xC2,
ZDO_STATUS_ERROR_RSP = 0xC3,
ZDO_SRC_RTG_IND = 0xC4,
ZDO_LEAVE_IND = 0xC9,
ZDO_TC_DEV_IND = 0xCA,
ZDO_PERMIT_JOIN_IND = 0xCB,
ZDO_MSG_CB_INCOMING = 0xFF
};
//https://e2e.ti.com/support/wireless-connectivity/zigbee-and-thread/f/158/t/475920
enum ZdoStates {
ZDO_DEV_HOLD = 0x00, // Initialized - not started automatically
ZDO_DEV_INIT = 0x01, // Initialized - not connected to anything
ZDO_DEV_NWK_DISC = 0x02, // Discovering PANIDs to join
ZDO_DEV_NWK_JOINING = 0x03, // Joining a PAN
ZDO_DEV_NWK_REJOIN = 0x04, // ReJoining a PAN, only for end devices
ZDO_DEV_END_DEVICE_UNAUTH = 0x05, // Joined but not yet authenticated by trust center
ZDO_DEV_END_DEVICE = 0x06, // Started as a device after authentication. Note: you'll see this for both Routers or End Devices.
ZDO_DEV_ROUTER = 0x07, // Started as a Zigbee Router
ZDO_DEV_COORD_STARTING = 0x08, // Starting as a Zigbee Coordinator
ZDO_DEV_ZB_COORD = 0x09, // Started as a a Zigbee Coordinator
ZDO_DEV_NWK_ORPHAN = 0x0A, // Device has lost information about its parent.
};
//
// Commands in the UTIL subsystem
enum Z_Util {
Z_UTIL_GET_DEVICE_INFO = 0x00,
Z_UTIL_GET_NV_INFO = 0x01,
Z_UTIL_SET_PANID = 0x02,
Z_UTIL_SET_CHANNELS = 0x03,
Z_UTIL_SET_SECLEVEL = 0x04,
Z_UTIL_SET_PRECFGKEY = 0x05,
Z_UTIL_CALLBACK_SUB_CMD = 0x06,
Z_UTIL_KEY_EVENT = 0x07,
Z_UTIL_TIME_ALIVE = 0x09,
Z_UTIL_LED_CONTROL = 0x0A,
Z_UTIL_TEST_LOOPBACK = 0x10,
Z_UTIL_DATA_REQ = 0x11,
Z_UTIL_SRC_MATCH_ENABLE = 0x20,
Z_UTIL_SRC_MATCH_ADD_ENTRY = 0x21,
Z_UTIL_SRC_MATCH_DEL_ENTRY = 0x22,
Z_UTIL_SRC_MATCH_CHECK_SRC_ADDR = 0x23,
Z_UTIL_SRC_MATCH_ACK_ALL_PENDING = 0x24,
Z_UTIL_SRC_MATCH_CHECK_ALL_PENDING = 0x25,
Z_UTIL_ADDRMGR_EXT_ADDR_LOOKUP = 0x40,
Z_UTIL_ADDRMGR_NWK_ADDR_LOOKUP = 0x41,
Z_UTIL_APSME_LINK_KEY_DATA_GET = 0x44,
Z_UTIL_APSME_LINK_KEY_NV_ID_GET = 0x45,
Z_UTIL_ASSOC_COUNT = 0x48,
Z_UTIL_ASSOC_FIND_DEVICE = 0x49,
Z_UTIL_ASSOC_GET_WITH_ADDRESS = 0x4A,
Z_UTIL_APSME_REQUEST_KEY_CMD = 0x4B,
Z_UTIL_ZCL_KEY_EST_INIT_EST = 0x80,
Z_UTIL_ZCL_KEY_EST_SIGN = 0x81,
Z_UTIL_UTIL_SYNC_REQ = 0xE0,
Z_UTIL_ZCL_KEY_ESTABLISH_IND = 0xE1
};
#endif // USE_ZIGBEE