Tasmota/tasmota/xdrv_24_buzzer.ino

/*
  xdrv_24_Buzzer.ino - buzzer support for Tasmota

  Copyright (C) 2021  Theo Arends

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_BUZZER
/*********************************************************************************************\
 * Buzzer support
\*********************************************************************************************/

#define XDRV_24                    24

struct BUZZER {
  uint32_t tune = 0;
  uint32_t tune_reload = 0;
  bool active = true;
  bool enable = false;
  uint8_t inverted = 0;            // Buzzer inverted flag (1 = (0 = On, 1 = Off))
  uint8_t count = 0;               // Number of buzzes
  uint8_t mode = 0;                // Buzzer mode (0 = regular, 1 = infinite, 2 = follow LED)
  uint8_t set[2];
  uint8_t duration;
  uint8_t state = 0;
  uint8_t tune_size = 0;
  uint8_t size = 0;
  uint8_t sleep;                   // Current copy of TasmotaGlobal.sleep
} Buzzer;

/*********************************************************************************************/

void BuzzerSet(uint32_t state) {
  if (Buzzer.inverted) {
    state = !state;
  }

  if (Settings->flag4.buzzer_freq_mode) {     // SetOption111 - Enable frequency output mode for buzzer
    static uint8_t last_state = 0;
    if (last_state != state) {
#ifdef ESP32
      if (analogAttach(Pin(GPIO_BUZZER)))
#endif  // ESP32
        // Set 50% duty cycle for frequency output
        // Set 0% (or 100% for inverted PWM) duty cycle which turns off frequency output either way
        analogWrite(Pin(GPIO_BUZZER), (state) ? Settings->pwm_range / 2 : 0);  // set duty cycle for frequency output
      last_state = state;
    }
  } else {
    DigitalWrite(GPIO_BUZZER, 0, state);     // Buzzer On/Off
  }
}

//void BuzzerBeep(uint32_t count = 1, uint32_t on = 1, uint32_t off = 1, uint32_t tune = 0, uint32_t mode = 0);
void BuzzerBeep(uint32_t count, uint32_t on, uint32_t off, uint32_t tune, uint32_t mode) {
  Buzzer.set[0] = off;                       // Off duration in 100 mSec steps
  Buzzer.set[1] = on;                        // On duration in 100 mSec steps
  Buzzer.duration = 1;                       // Start buzzer on first step
  Buzzer.size = 0;
  Buzzer.tune_size = 0;
  Buzzer.tune = 0;
  Buzzer.tune_reload = 0;
  Buzzer.mode = mode;

  if (tune) {
    uint32_t tune1 = tune;
    uint32_t tune2 = tune;
    for (uint32_t i = 0; i < 32; i++) {
      if (!(tune2 & 0x80000000)) {
        tune2 <<= 1;                         // Skip leading silence
      } else {
        Buzzer.tune_size++;                  // Allow trailing silence
        Buzzer.tune_reload <<= 1;            // Add swapped tune
        Buzzer.tune_reload |= tune1 & 1;
        tune1 >>= 1;
      }
    }
    Buzzer.size = Buzzer.tune_size;
    Buzzer.tune = Buzzer.tune_reload;
  }
  Buzzer.count = count * 2;                  // Start buzzer

  AddLog(LOG_LEVEL_DEBUG, PSTR("BUZ: Count %d(%d), Time %d/%d, Tune 0x%08X(0x%08X), Size %d, Mode %d"),
    count, Buzzer.count, on, off, tune, Buzzer.tune, Buzzer.tune_size, Settings->flag4.buzzer_freq_mode);

  Buzzer.enable = (Buzzer.count > 0);
  if (Buzzer.enable) {
    Buzzer.sleep = TasmotaGlobal.sleep;
    if (Settings->sleep > PWM_MAX_SLEEP) {
      TasmotaGlobal.sleep = PWM_MAX_SLEEP;   // Set a maxumum value of 10 milliseconds to ensure that buzzer periods are a bit more accurate
    } else {
      TasmotaGlobal.sleep = Settings->sleep;  // Or keep the current sleep if it's lower than 10
    }
  } else {
    TasmotaGlobal.sleep = Buzzer.sleep;      // Restore original sleep
    BuzzerSet(0);
  }
}

void BuzzerSetStateToLed(uint32_t state) {
  if (Buzzer.enable && (2 == Buzzer.mode)) {
    Buzzer.state = (state != 0);
    BuzzerSet(Buzzer.state);
  }
}

void BuzzerBeep(uint32_t count) {
  BuzzerBeep(count, 1, 1, 0, 0);
}

void BuzzerEnabledBeep(uint32_t count, uint32_t duration) {
  if (Settings->flag3.buzzer_enable) {        // SetOption67 - Enable buzzer when available
    BuzzerBeep(count, duration, 1, 0, 0);
  }
}

/*********************************************************************************************/

bool BuzzerPinState(void) {
  if (XdrvMailbox.index == AGPIO(GPIO_BUZZER_INV)) {
    Buzzer.inverted = 1;
    XdrvMailbox.index -= (AGPIO(GPIO_BUZZER_INV) - AGPIO(GPIO_BUZZER));
    return true;
  }
  return false;
}

void BuzzerInit(void) {
  if (PinUsed(GPIO_BUZZER)) {
    pinMode(Pin(GPIO_BUZZER), OUTPUT);
    BuzzerSet(0);
  } else {
    Buzzer.active = false;
  }
}

void BuzzerEvery100mSec(void) {
  if (Buzzer.enable && (Buzzer.mode != 2)) {
    if (Buzzer.count) {
      if (Buzzer.duration) {
        Buzzer.duration--;
        if (!Buzzer.duration) {
          if (Buzzer.size) {
            Buzzer.size--;
            Buzzer.state = Buzzer.tune & 1;
            Buzzer.tune >>= 1;
          } else {
            Buzzer.size = Buzzer.tune_size;
            Buzzer.tune = Buzzer.tune_reload;
            Buzzer.count -= (Buzzer.tune_reload) ? 2 : 1;
            Buzzer.state = Buzzer.count & 1;
            if (Buzzer.mode) {
              Buzzer.count |= 2;
            }
          }
          Buzzer.duration = Buzzer.set[Buzzer.state];
        }
      }
      BuzzerSet(Buzzer.state);
    } else {
      TasmotaGlobal.sleep = Buzzer.sleep;      // Restore original sleep
      Buzzer.enable = false;
    }
  }
}

/*********************************************************************************************\
 * Commands
\*********************************************************************************************/

const char kBuzzerCommands[] PROGMEM = "Buzzer|"  // Prefix
  "Active|Pwm||" ;

SO_SYNONYMS(kBuzzerSynonyms,
  67, 111
);

void (* const BuzzerCommand[])(void) PROGMEM = {
  &CmndBuzzer };

void CmndBuzzer(void) {
  // Buzzer <number of beeps>,<duration of beep in 100mS steps>,<duration of silence in 100mS steps>,<tune>
  // All parameters are optional
  //
  // Buzzer              = Buzzer 1,1,1 = Beep once with both duration and pause set to 100mS
  // Buzzer 0            = Stop active beep cycle
  // Buzzer 2            = Beep twice with duration 200mS and pause 100mS
  // Buzzer 2,3          = Beep twice with duration 300mS and pause 100mS
  // Buzzer 2,3,4        = Beep twice with duration 300mS and pause 400mS
  // Buzzer 2,3,4,0x0F54 = Beep a sequence twice indicated by 0x0F54 = 1111 0101 0100 with duration 300mS and pause 400mS
  //                         Notice skipped leading zeroes but valid trailing zeroes
  // Buzzer -1           = Beep infinite
  // Buzzer -2           = Beep following link led

  if (XdrvMailbox.data_len > 0) {
    if (XdrvMailbox.payload != 0) {
      uint32_t parm[4] = { 0 };
      ParseParameters(4, parm);
      uint32_t mode = 0;
      if (XdrvMailbox.payload < 0) {
        parm[0] = 1;                         // Default Count
        if (XdrvMailbox.payload > -3) {
          mode = -XdrvMailbox.payload;       // 0, 1 or 2
        }
      }
      for (uint32_t i = 1; i < 3; i++) {
        if (parm[i] < 1) { parm[i] = 1; }    // Default On time, Off time
      }
      BuzzerBeep(parm[0], parm[1], parm[2], parm[3], mode);
    } else {
      BuzzerBeep(0);
    }
  } else {
    BuzzerBeep(1);
  }
  ResponseCmndDone();
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xdrv24(uint8_t function) {
  bool result = false;

  if (Buzzer.active) {
    switch (function) {
      case FUNC_EVERY_100_MSECOND:
        BuzzerEvery100mSec();
        break;
      case FUNC_COMMAND:
        result = DecodeCommand(kBuzzerCommands, BuzzerCommand, kBuzzerSynonyms);
        break;
      case FUNC_PRE_INIT:
        BuzzerInit();
        break;
      case FUNC_PIN_STATE:
        result = BuzzerPinState();
        break;
    }
  }
  return result;
}

#endif  // USE_BUZZER