mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_template_ESP32.h

839 lines
30 KiB
C
Raw Normal View History

Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
/*
tasmota_template_ESP32.h - template settings for Tasmota
Copyright (C) 2020 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _TASMOTA_TEMPLATE_ESP32_H_
#define _TASMOTA_TEMPLATE_ESP32_H_
#ifdef ESP32
Change ESP32 pin allocation part 1
2020-04-28 17:27:07 +01:00
#ifndef FINAL_ESP32
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
// Hardware has no ESP32
#undef USE_TUYA_DIMMER
#undef USE_PWM_DIMMER
#undef USE_EXS_DIMMER
#undef USE_ARMTRONIX_DIMMERS
#undef USE_SONOFF_RF
#undef USE_SONOFF_SC
#undef USE_SONOFF_IFAN
#undef USE_SONOFF_L1
#undef USE_SONOFF_D1
#undef USE_RF_FLASH
Enable I2C in ESP32 and remove MQTT checks
2020-04-14 16:36:36 +01:00
// Not ported (yet)
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
#undef USE_DISCOVERY
Enable I2C in ESP32 and remove MQTT checks
2020-04-14 16:36:36 +01:00
#undef USE_ADC_VCC // Needs to be ported
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
#undef USE_DEEPSLEEP
#undef USE_MY92X1
#undef USE_TUYA_MCU
#undef USE_PS_16_DZ
Change ESP32 pin allocation part 1
2020-04-28 17:27:07 +01:00
// User selectable GPIO functionality
// ATTENTION: Only add at the end of this list just before GPIO_SENSOR_END
// Then add the same name(s) in a nice location in array kGpioNiceList
enum UserSelectablePins {
GPIO_NONE, // Not used
GPIO_DHT11, // DHT11
GPIO_DHT22, // DHT21, DHT22, AM2301, AM2302, AM2321
GPIO_SI7021, // iTead SI7021
GPIO_DSB, // Single wire DS18B20 or DS18S20
GPIO_I2C_SCL, // I2C SCL
GPIO_I2C_SDA, // I2C SDA
GPIO_WS2812, // WS2812 Led string
GPIO_IRSEND, // IR remote
GPIO_SWT1, // User connected external switches
GPIO_SWT2,
GPIO_SWT3,
GPIO_SWT4,
GPIO_SWT5,
GPIO_SWT6,
GPIO_SWT7,
GPIO_SWT8,
GPIO_KEY1, // Button usually connected to GPIO0
GPIO_KEY2,
GPIO_KEY3,
GPIO_KEY4,
GPIO_REL1, // Relays
GPIO_REL2,
GPIO_REL3,
GPIO_REL4,
GPIO_REL5,
GPIO_REL6,
GPIO_REL7,
GPIO_REL8,
GPIO_REL1_INV,
GPIO_REL2_INV,
GPIO_REL3_INV,
GPIO_REL4_INV,
GPIO_REL5_INV,
GPIO_REL6_INV,
GPIO_REL7_INV,
GPIO_REL8_INV,
GPIO_PWM1, // RGB Red or C Cold White
GPIO_PWM2, // RGB Green or CW Warm White
GPIO_PWM3, // RGB Blue
GPIO_PWM4, // RGBW (Cold) White
GPIO_PWM5, // RGBCW Warm White
GPIO_CNTR1,
GPIO_CNTR2,
GPIO_CNTR3,
GPIO_CNTR4,
GPIO_PWM1_INV, // RGB Red or C Cold White
GPIO_PWM2_INV, // RGB Green or CW Warm White
GPIO_PWM3_INV, // RGB Blue
GPIO_PWM4_INV, // RGBW (Cold) White
GPIO_PWM5_INV, // RGBCW Warm White
GPIO_IRRECV, // IR receiver
GPIO_LED1, // Leds
GPIO_LED2,
GPIO_LED3,
GPIO_LED4,
GPIO_LED1_INV,
GPIO_LED2_INV,
GPIO_LED3_INV,
GPIO_LED4_INV,
GPIO_MHZ_TXD, // MH-Z19 Serial interface
GPIO_MHZ_RXD, // MH-Z19 Serial interface
GPIO_PZEM0XX_TX, // PZEM0XX Serial interface
GPIO_PZEM004_RX, // PZEM004T Serial interface
GPIO_SAIR_TX, // SenseAir Serial interface
GPIO_SAIR_RX, // SenseAir Serial interface
GPIO_SPI_CS, // SPI Chip Select
GPIO_SPI_DC, // SPI Data Direction
GPIO_BACKLIGHT, // Display backlight control
GPIO_PMS5003_RX, // Plantower PMS5003 Serial interface
GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface
GPIO_SBR_TX, // Serial Bridge Serial interface
GPIO_SBR_RX, // Serial Bridge Serial interface
GPIO_SR04_TRIG, // SR04 Trigger/TX pin
GPIO_SR04_ECHO, // SR04 Echo/RX pin
GPIO_SDM120_TX, // SDM120 Serial interface
GPIO_SDM120_RX, // SDM120 Serial interface
GPIO_SDM630_TX, // SDM630 Serial interface
GPIO_SDM630_RX, // SDM630 Serial interface
GPIO_TM16CLK, // TM1638 Clock
GPIO_TM16DIO, // TM1638 Data I/O
GPIO_TM16STB, // TM1638 Strobe
GPIO_SWT1_NP, // User connected external switches
GPIO_SWT2_NP,
GPIO_SWT3_NP,
GPIO_SWT4_NP,
GPIO_SWT5_NP,
GPIO_SWT6_NP,
GPIO_SWT7_NP,
GPIO_SWT8_NP,
GPIO_KEY1_NP, // Button usually connected to GPIO0
GPIO_KEY2_NP,
GPIO_KEY3_NP,
GPIO_KEY4_NP,
GPIO_CNTR1_NP,
GPIO_CNTR2_NP,
GPIO_CNTR3_NP,
GPIO_CNTR4_NP,
GPIO_PZEM016_RX, // PZEM-014,016 Serial Modbus interface
GPIO_PZEM017_RX, // PZEM-003,017 Serial Modbus interface
GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player
GPIO_SDS0X1_TX, // Nova Fitness SDS011 Serial interface
GPIO_HX711_SCK, // HX711 Load Cell clock
GPIO_HX711_DAT, // HX711 Load Cell data
GPIO_TX2X_TXD_BLACK, // TX20/TX23 Transmission Pin
GPIO_RFSEND, // RF transmitter
GPIO_RFRECV, // RF receiver
GPIO_TUYA_TX, // Tuya Serial interface
GPIO_TUYA_RX, // Tuya Serial interface
GPIO_MGC3130_XFER, // MGC3130 Transfer
GPIO_MGC3130_RESET, // MGC3130 Reset
GPIO_SSPI_MISO, // Software SPI Master Input Slave Output
GPIO_SSPI_MOSI, // Software SPI Master Output Slave Input
GPIO_SSPI_SCLK, // Software SPI Serial Clock
GPIO_SSPI_CS, // Software SPI Chip Select
GPIO_SSPI_DC, // Software SPI Data or Command
GPIO_RF_SENSOR, // Rf receiver with sensor decoding
GPIO_AZ_TXD, // AZ-Instrument 7798 Serial interface
GPIO_AZ_RXD, // AZ-Instrument 7798 Serial interface
GPIO_MAX31855CS, // MAX31855 Serial interface
GPIO_MAX31855CLK, // MAX31855 Serial interface
GPIO_MAX31855DO, // MAX31855 Serial interface
GPIO_KEY1_INV, // Inverted buttons
GPIO_KEY2_INV,
GPIO_KEY3_INV,
GPIO_KEY4_INV,
GPIO_KEY1_INV_NP, // Inverted buttons without pull-up
GPIO_KEY2_INV_NP,
GPIO_KEY3_INV_NP,
GPIO_KEY4_INV_NP,
GPIO_NRG_SEL, // HLW8012/HLJ-01 Sel output (1 = Voltage)
GPIO_NRG_SEL_INV, // HLW8012/HLJ-01 Sel output (0 = Voltage)
GPIO_NRG_CF1, // HLW8012/HLJ-01 CF1 voltage / current
GPIO_HLW_CF, // HLW8012 CF power
GPIO_HJL_CF, // HJL-01/BL0937 CF power
GPIO_MCP39F5_TX, // MCP39F501 Serial interface (Shelly2)
GPIO_MCP39F5_RX, // MCP39F501 Serial interface (Shelly2)
GPIO_MCP39F5_RST, // MCP39F501 Reset (Shelly2)
GPIO_PN532_TXD, // PN532 NFC Serial Tx
GPIO_PN532_RXD, // PN532 NFC Serial Rx
GPIO_SM16716_CLK, // SM16716 CLOCK
GPIO_SM16716_DAT, // SM16716 DATA
GPIO_SM16716_SEL, // SM16716 SELECT
GPIO_DI, // my92x1 PWM input
GPIO_DCKI, // my92x1 CLK input
GPIO_CSE7766_TX, // CSE7766 Serial interface (S31 and Pow R2) - Not used anymore 20200121
GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2)
GPIO_ARIRFRCV, // AriLux RF Receive input
GPIO_TXD, // Serial interface
GPIO_RXD, // Serial interface
GPIO_ROT1A, // Rotary switch1 A Pin
GPIO_ROT1B, // Rotary switch1 B Pin
GPIO_ROT2A, // Rotary switch2 A Pin
GPIO_ROT2B, // Rotary switch2 B Pin
GPIO_HRE_CLOCK, // Clock/Power line for HR-E Water Meter
GPIO_HRE_DATA, // Data line for HR-E Water Meter
GPIO_ADE7953_IRQ, // ADE7953 IRQ
GPIO_LEDLNK, // Link led
GPIO_LEDLNK_INV, // Inverted link led
GPIO_ARIRFSEL, // Arilux RF Receive input selected
GPIO_BUZZER, // Buzzer
GPIO_BUZZER_INV, // Inverted buzzer
GPIO_OLED_RESET, // OLED Display Reset
GPIO_SOLAXX1_TX, // Solax Inverter tx pin
GPIO_SOLAXX1_RX, // Solax Inverter rx pin
GPIO_ZIGBEE_TX, // Zigbee Serial interface
GPIO_ZIGBEE_RX, // Zigbee Serial interface
GPIO_RDM6300_RX, // RDM6300 RX
GPIO_IBEACON_TX, // HM17 IBEACON TX
GPIO_IBEACON_RX, // HM17 IBEACON RX
GPIO_A4988_DIR, // A4988 direction pin
GPIO_A4988_STP, // A4988 step pin
GPIO_A4988_ENA, // A4988 enabled pin
GPIO_A4988_MS1, // A4988 microstep pin1
GPIO_A4988_MS2, // A4988 microstep pin2
GPIO_A4988_MS3, // A4988 microstep pin3
GPIO_DDS2382_TX, // DDS2382 Serial interface
GPIO_DDS2382_RX, // DDS2382 Serial interface
GPIO_DDSU666_TX, // DDSU666 Serial interface
GPIO_DDSU666_RX, // DDSU666 Serial interface
GPIO_SM2135_CLK, // SM2135 Clk
GPIO_SM2135_DAT, // SM2135 Dat
GPIO_DEEPSLEEP, // Kill switch for deepsleep
GPIO_EXS_ENABLE, // EXS MCU Enable
GPIO_TASMOTASLAVE_TXD, // Slave TX
GPIO_TASMOTASLAVE_RXD, // Slave RX
GPIO_TASMOTASLAVE_RST, // Slave Reset Pin
GPIO_TASMOTASLAVE_RST_INV, // Slave Reset Inverted
GPIO_HPMA_RX, // Honeywell HPMA115S0 Serial interface
GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface
GPIO_GPS_RX, // GPS serial interface
GPIO_GPS_TX, // GPS serial interface
GPIO_DSB_OUT, // Pseudo Single wire DS18B20 or DS18S20
GPIO_DHT11_OUT, // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
GPIO_HM10_RX, // HM10-BLE-Mijia-bridge serial interface
GPIO_HM10_TX, // HM10-BLE-Mijia-bridge serial interface
GPIO_LE01MR_RX, // F&F LE-01MR energy meter
GPIO_LE01MR_TX, // F&F LE-01MR energy meter
GPIO_CC1101_GDO0, // CC1101 pin for RX
GPIO_CC1101_GDO2, // CC1101 pin for RX
GPIO_HRXL_RX, // Data from MaxBotix HRXL sonar range sensor
GPIO_ELECTRIQ_MOODL_TX, // ElectriQ iQ-wifiMOODL Serial TX
GPIO_AS3935,
GPIO_PMS5003_TX, // Plantower PMS5003 Serial interface
GPIO_SENSOR_END };
// Programmer selectable GPIO functionality
enum ProgramSelectablePins {
GPIO_FIX_START = 251,
GPIO_SPI_MISO, // SPI MISO library fixed pin GPIO12
GPIO_SPI_MOSI, // SPI MOSI library fixed pin GPIO13
GPIO_SPI_CLK, // SPI Clk library fixed pin GPIO14
GPIO_USER, // User configurable needs to be 255
GPIO_MAX };
// Text in webpage Module Parameters and commands GPIOS and GPIO
const char kSensorNames[] PROGMEM =
D_SENSOR_NONE "|"
D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|"
D_SENSOR_DS18X20 "|"
D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|"
D_SENSOR_WS2812 "|"
D_SENSOR_IRSEND "|"
D_SENSOR_SWITCH "1|" D_SENSOR_SWITCH "2|" D_SENSOR_SWITCH "3|" D_SENSOR_SWITCH "4|" D_SENSOR_SWITCH "5|" D_SENSOR_SWITCH "6|" D_SENSOR_SWITCH "7|" D_SENSOR_SWITCH "8|"
D_SENSOR_BUTTON "1|" D_SENSOR_BUTTON "2|" D_SENSOR_BUTTON "3|" D_SENSOR_BUTTON "4|"
D_SENSOR_RELAY "1|" D_SENSOR_RELAY "2|" D_SENSOR_RELAY "3|" D_SENSOR_RELAY "4|" D_SENSOR_RELAY "5|" D_SENSOR_RELAY "6|" D_SENSOR_RELAY "7|" D_SENSOR_RELAY "8|"
D_SENSOR_RELAY "1i|" D_SENSOR_RELAY "2i|" D_SENSOR_RELAY "3i|" D_SENSOR_RELAY "4i|" D_SENSOR_RELAY "5i|" D_SENSOR_RELAY "6i|" D_SENSOR_RELAY "7i|" D_SENSOR_RELAY "8i|"
D_SENSOR_PWM "1|" D_SENSOR_PWM "2|" D_SENSOR_PWM "3|" D_SENSOR_PWM "4|" D_SENSOR_PWM "5|"
D_SENSOR_COUNTER "1|" D_SENSOR_COUNTER "2|" D_SENSOR_COUNTER "3|" D_SENSOR_COUNTER "4|"
D_SENSOR_PWM "1i|" D_SENSOR_PWM "2i|" D_SENSOR_PWM "3i|" D_SENSOR_PWM "4i|" D_SENSOR_PWM "5i|"
D_SENSOR_IRRECV "|"
D_SENSOR_LED "1|" D_SENSOR_LED "2|" D_SENSOR_LED "3|" D_SENSOR_LED "4|"
D_SENSOR_LED "1i|" D_SENSOR_LED "2i|" D_SENSOR_LED "3i|" D_SENSOR_LED "4i|"
D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|"
D_SENSOR_PZEM0XX_TX "|" D_SENSOR_PZEM004_RX "|"
D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|"
D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|" D_SENSOR_BACKLIGHT "|"
D_SENSOR_PMS5003_RX "|" D_SENSOR_SDS0X1_RX "|"
D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|"
D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|"
D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|"
D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX "|"
D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|"
D_SENSOR_SWITCH "1n|" D_SENSOR_SWITCH "2n|" D_SENSOR_SWITCH "3n|" D_SENSOR_SWITCH "4n|" D_SENSOR_SWITCH "5n|" D_SENSOR_SWITCH "6n|" D_SENSOR_SWITCH "7n|" D_SENSOR_SWITCH "8n|"
D_SENSOR_BUTTON "1n|" D_SENSOR_BUTTON "2n|" D_SENSOR_BUTTON "3n|" D_SENSOR_BUTTON "4n|"
D_SENSOR_COUNTER "1n|" D_SENSOR_COUNTER "2n|" D_SENSOR_COUNTER "3n|" D_SENSOR_COUNTER "4n|"
D_SENSOR_PZEM016_RX "|" D_SENSOR_PZEM017_RX "|"
D_SENSOR_DFR562 "|" D_SENSOR_SDS0X1_TX "|"
D_SENSOR_HX711_SCK "|" D_SENSOR_HX711_DAT "|"
D_SENSOR_TX2X_TX "|"
D_SENSOR_RFSEND "|" D_SENSOR_RFRECV "|"
D_SENSOR_TUYA_TX "|" D_SENSOR_TUYA_RX "|"
D_SENSOR_MGC3130_XFER "|" D_SENSOR_MGC3130_RESET "|"
D_SENSOR_SSPI_MISO "|" D_SENSOR_SSPI_MOSI "|" D_SENSOR_SSPI_SCLK "|" D_SENSOR_SSPI_CS "|" D_SENSOR_SSPI_DC "|"
D_SENSOR_RF_SENSOR "|"
D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|"
D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|"
D_SENSOR_BUTTON "1i|" D_SENSOR_BUTTON "2i|" D_SENSOR_BUTTON "3i|" D_SENSOR_BUTTON "4i|"
D_SENSOR_BUTTON "1in|" D_SENSOR_BUTTON "2in|" D_SENSOR_BUTTON "3in|" D_SENSOR_BUTTON "4in|"
D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|"
D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|"
D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|"
D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER "|"
D_SENSOR_MY92X1_DI "|" D_SENSOR_MY92X1_DCKI "|"
D_SENSOR_CSE7766_TX "|" D_SENSOR_CSE7766_RX "|"
D_SENSOR_ARIRFRCV "|" D_SENSOR_TXD "|" D_SENSOR_RXD "|"
D_SENSOR_ROTARY "1a|" D_SENSOR_ROTARY "1b|" D_SENSOR_ROTARY "2a|" D_SENSOR_ROTARY "2b|"
D_SENSOR_HRE_CLOCK "|" D_SENSOR_HRE_DATA "|"
D_SENSOR_ADE7953_IRQ "|"
D_SENSOR_LED_LINK "|" D_SENSOR_LED_LINK "i|"
D_SENSOR_ARIRFSEL "|"
D_SENSOR_BUZZER "|" D_SENSOR_BUZZER "i|"
D_SENSOR_OLED_RESET "|"
D_SENSOR_SOLAXX1_TX "|" D_SENSOR_SOLAXX1_RX "|"
D_SENSOR_ZIGBEE_TXD "|" D_SENSOR_ZIGBEE_RXD "|"
D_SENSOR_RDM6300_RX "|"
D_SENSOR_IBEACON_TX "|" D_SENSOR_IBEACON_RX "|"
D_SENSOR_A4988_DIR "|" D_SENSOR_A4988_STP "|" D_SENSOR_A4988_ENA "|" D_SENSOR_A4988_MS1 "|" D_SENSOR_A4988_MS2 "|" D_SENSOR_A4988_MS3 "|"
D_SENSOR_DDS2382_TX "|" D_SENSOR_DDS2382_RX "|"
D_SENSOR_DDSU666_TX "|" D_SENSOR_DDSU666_RX "|"
D_SENSOR_SM2135_CLK "|" D_SENSOR_SM2135_DAT "|"
D_SENSOR_DEEPSLEEP "|" D_SENSOR_EXS_ENABLE "|"
D_SENSOR_SLAVE_TX "|" D_SENSOR_SLAVE_RX "|" D_SENSOR_SLAVE_RESET "|" D_SENSOR_SLAVE_RESET "i|"
D_SENSOR_HPMA_RX "|" D_SENSOR_HPMA_TX "|"
D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX "|"
D_SENSOR_DS18X20 "o|" D_SENSOR_DHT11 "o|"
D_SENSOR_HM10_RX "|" D_SENSOR_HM10_TX "|"
D_SENSOR_LE01MR_RX "|" D_SENSOR_LE01MR_TX "|"
D_SENSOR_CC1101_GDO0 "|" D_SENSOR_CC1101_GDO2 "|"
D_SENSOR_HRXL_RX "|"
D_SENSOR_ELECTRIQ_MOODL "|"
D_SENSOR_AS3935 "|" D_SENSOR_PMS5003_TX
;
const char kSensorNamesFixed[] PROGMEM =
D_SENSOR_SPI_MISO "|" D_SENSOR_SPI_MOSI "|" D_SENSOR_SPI_CLK "|"
D_SENSOR_USER;
const uint8_t kGpioNiceList[] PROGMEM = {
GPIO_NONE, // Not used
GPIO_KEY1, // Buttons
GPIO_KEY1_NP,
GPIO_KEY1_INV,
GPIO_KEY1_INV_NP,
GPIO_KEY2,
GPIO_KEY2_NP,
GPIO_KEY2_INV,
GPIO_KEY2_INV_NP,
GPIO_KEY3,
GPIO_KEY3_NP,
GPIO_KEY3_INV,
GPIO_KEY3_INV_NP,
GPIO_KEY4,
GPIO_KEY4_NP,
GPIO_KEY4_INV,
GPIO_KEY4_INV_NP,
GPIO_SWT1, // User connected external switches
GPIO_SWT1_NP,
GPIO_SWT2,
GPIO_SWT2_NP,
GPIO_SWT3,
GPIO_SWT3_NP,
GPIO_SWT4,
GPIO_SWT4_NP,
GPIO_SWT5,
GPIO_SWT5_NP,
GPIO_SWT6,
GPIO_SWT6_NP,
GPIO_SWT7,
GPIO_SWT7_NP,
GPIO_SWT8,
GPIO_SWT8_NP,
GPIO_REL1, // Relays
GPIO_REL1_INV,
GPIO_REL2,
GPIO_REL2_INV,
GPIO_REL3,
GPIO_REL3_INV,
GPIO_REL4,
GPIO_REL4_INV,
GPIO_REL5,
GPIO_REL5_INV,
GPIO_REL6,
GPIO_REL6_INV,
GPIO_REL7,
GPIO_REL7_INV,
GPIO_REL8,
GPIO_REL8_INV,
GPIO_LED1, // Leds
GPIO_LED1_INV,
GPIO_LED2,
GPIO_LED2_INV,
GPIO_LED3,
GPIO_LED3_INV,
GPIO_LED4,
GPIO_LED4_INV,
GPIO_LEDLNK, // Link led
GPIO_LEDLNK_INV, // Inverted link led
GPIO_PWM1, // RGB Red or C Cold White
GPIO_PWM1_INV,
GPIO_PWM2, // RGB Green or CW Warm White
GPIO_PWM2_INV,
GPIO_PWM3, // RGB Blue
GPIO_PWM3_INV,
GPIO_PWM4, // RGBW (Cold) White
GPIO_PWM4_INV,
GPIO_PWM5, // RGBCW Warm White
GPIO_PWM5_INV,
#ifdef USE_COUNTER
GPIO_CNTR1, // Counters
GPIO_CNTR1_NP,
GPIO_CNTR2,
GPIO_CNTR2_NP,
GPIO_CNTR3,
GPIO_CNTR3_NP,
GPIO_CNTR4,
GPIO_CNTR4_NP,
#endif
#ifdef USE_BUZZER
GPIO_BUZZER, // Buzzer
GPIO_BUZZER_INV, // Inverted buzzer
#endif
GPIO_TXD, // Serial interface
GPIO_RXD, // Serial interface
#ifdef USE_I2C
GPIO_I2C_SCL, // I2C SCL
GPIO_I2C_SDA, // I2C SDA
#endif
#ifdef USE_SPI
GPIO_SPI_CS, // SPI Chip Select
GPIO_SPI_DC, // SPI Data Direction
GPIO_SSPI_MISO, // Software SPI Master Input Slave Output
GPIO_SSPI_MOSI, // Software SPI Master Output Slave Input
GPIO_SSPI_SCLK, // Software SPI Serial Clock
GPIO_SSPI_CS, // Software SPI Chip Select
GPIO_SSPI_DC, // Software SPI Data or Command
#endif
#ifdef USE_DISPLAY
GPIO_BACKLIGHT, // Display backlight control
GPIO_OLED_RESET, // OLED Display Reset
#endif
#ifdef USE_DHT
GPIO_DHT11, // DHT11
GPIO_DHT22, // DHT21, DHT22, AM2301, AM2302, AM2321
GPIO_SI7021, // iTead SI7021
GPIO_DHT11_OUT, // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321
#endif
#ifdef USE_DS18x20
GPIO_DSB, // Single wire DS18B20 or DS18S20
GPIO_DSB_OUT, // Pseudo Single wire DS18B20 or DS18S20
#endif
// Light
#ifdef USE_LIGHT
#ifdef USE_WS2812
GPIO_WS2812, // WS2812 Led string
#endif
#ifdef USE_ARILUX_RF
GPIO_ARIRFRCV, // AriLux RF Receive input
GPIO_ARIRFSEL, // Arilux RF Receive input selected
#endif
#ifdef USE_MY92X1
GPIO_DI, // my92x1 PWM input
GPIO_DCKI, // my92x1 CLK input
#endif // USE_MY92X1
#ifdef USE_SM16716
GPIO_SM16716_CLK, // SM16716 CLOCK
GPIO_SM16716_DAT, // SM16716 DATA
GPIO_SM16716_SEL, // SM16716 SELECT
#endif // USE_SM16716
#ifdef USE_SM2135
GPIO_SM2135_CLK, // SM2135 CLOCK
GPIO_SM2135_DAT, // SM2135 DATA
#endif // USE_SM2135
#ifdef USE_TUYA_MCU
GPIO_TUYA_TX, // Tuya Serial interface
GPIO_TUYA_RX, // Tuya Serial interface
#endif
#ifdef USE_EXS_DIMMER
GPIO_EXS_ENABLE, // EXS MCU Enable
#endif
#ifdef USE_ELECTRIQ_MOODL
GPIO_ELECTRIQ_MOODL_TX,
#endif
#endif // USE_LIGHT
#if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL)
GPIO_IRSEND, // IR remote
#if defined(USE_IR_RECEIVE) || defined(USE_IR_REMOTE_FULL)
GPIO_IRRECV, // IR receiver
#endif
#endif
#ifdef USE_RC_SWITCH
GPIO_RFSEND, // RF transmitter
GPIO_RFRECV, // RF receiver
#endif
#ifdef USE_RF_SENSOR
GPIO_RF_SENSOR, // Rf receiver with sensor decoding
#endif
#ifdef USE_SR04
GPIO_SR04_TRIG, // SR04 Tri/TXgger pin
GPIO_SR04_ECHO, // SR04 Ech/RXo pin
#endif
#ifdef USE_TM1638
GPIO_TM16CLK, // TM1638 Clock
GPIO_TM16DIO, // TM1638 Data I/O
GPIO_TM16STB, // TM1638 Strobe
#endif
#ifdef USE_HX711
GPIO_HX711_SCK, // HX711 Load Cell clock
GPIO_HX711_DAT, // HX711 Load Cell data
#endif
// Energy sensors
#ifdef USE_ENERGY_SENSOR
#ifdef USE_HLW8012
GPIO_NRG_SEL, // HLW8012/HLJ-01 Sel output (1 = Voltage)
GPIO_NRG_SEL_INV, // HLW8012/HLJ-01 Sel output (0 = Voltage)
GPIO_NRG_CF1, // HLW8012/HLJ-01 CF1 voltage / current
GPIO_HLW_CF, // HLW8012 CF power
GPIO_HJL_CF, // HJL-01/BL0937 CF power
#endif
#if defined(USE_I2C) && defined(USE_ADE7953)
GPIO_ADE7953_IRQ, // ADE7953 IRQ
#endif
#ifdef USE_CSE7766
GPIO_CSE7766_TX, // CSE7766 Serial interface (S31 and Pow R2)
GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2)
#endif
#ifdef USE_MCP39F501
GPIO_MCP39F5_TX, // MCP39F501 Serial interface (Shelly2)
GPIO_MCP39F5_RX, // MCP39F501 Serial interface (Shelly2)
GPIO_MCP39F5_RST, // MCP39F501 Reset (Shelly2)
#endif
#if defined(USE_PZEM004T) || defined(USE_PZEM_AC) || defined(USE_PZEM_DC)
GPIO_PZEM0XX_TX, // PZEM0XX Serial interface
#endif
#ifdef USE_PZEM004T
GPIO_PZEM004_RX, // PZEM004T Serial interface
#endif
#ifdef USE_PZEM_AC
GPIO_PZEM016_RX, // PZEM-014,016 Serial Modbus interface
#endif
#ifdef USE_PZEM_DC
GPIO_PZEM017_RX, // PZEM-003,017 Serial Modbus interface
#endif
#ifdef USE_SDM120
GPIO_SDM120_TX, // SDM120 Serial interface
GPIO_SDM120_RX, // SDM120 Serial interface
#endif
#ifdef USE_SDM630
GPIO_SDM630_TX, // SDM630 Serial interface
GPIO_SDM630_RX, // SDM630 Serial interface
#endif
#ifdef USE_DDS2382
GPIO_DDS2382_TX, // DDS2382 Serial interface
GPIO_DDS2382_RX, // DDS2382 Serial interface
#endif
#ifdef USE_DDSU666
GPIO_DDSU666_TX, // DDSU666 Serial interface
GPIO_DDSU666_RX, // DDSU666 Serial interface
#endif // USE_DDSU666
#ifdef USE_SOLAX_X1
GPIO_SOLAXX1_TX, // Solax Inverter tx pin
GPIO_SOLAXX1_RX, // Solax Inverter rx pin
#endif // USE_SOLAX_X1
#ifdef USE_LE01MR
GPIO_LE01MR_RX, // F7F LE-01MR energy meter rx pin
GPIO_LE01MR_TX, // F7F LE-01MR energy meter tx pin
#endif // IFDEF:USE_LE01MR
#endif // USE_ENERGY_SENSOR
// Serial
#ifdef USE_SERIAL_BRIDGE
GPIO_SBR_TX, // Serial Bridge Serial interface
GPIO_SBR_RX, // Serial Bridge Serial interface
#endif
#ifdef USE_ZIGBEE
GPIO_ZIGBEE_TX, // Zigbee Serial interface
GPIO_ZIGBEE_RX, // Zigbee Serial interface
#endif
#ifdef USE_MHZ19
GPIO_MHZ_TXD, // MH-Z19 Serial interface
GPIO_MHZ_RXD, // MH-Z19 Serial interface
#endif
#ifdef USE_SENSEAIR
GPIO_SAIR_TX, // SenseAir Serial interface
GPIO_SAIR_RX, // SenseAir Serial interface
#endif
#ifdef USE_NOVA_SDS
GPIO_SDS0X1_TX, // Nova Fitness SDS011 Serial interface
GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface
#endif
#ifdef USE_HPMA
GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface
GPIO_HPMA_RX, // Honeywell HPMA115S0 Serial interface
#endif
#ifdef USE_PMS5003
GPIO_PMS5003_TX, // Plantower PMS5003 Serial interface
GPIO_PMS5003_RX, // Plantower PMS5003 Serial interface
#endif
#if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR)
GPIO_TX2X_TXD_BLACK, // TX20/TX23 Transmission Pin
#endif
#ifdef USE_MP3_PLAYER
GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player Serial interface
#endif
#ifdef USE_AZ7798
GPIO_AZ_TXD, // AZ-Instrument 7798 CO2 datalogger Serial interface
GPIO_AZ_RXD, // AZ-Instrument 7798 CO2 datalogger Serial interface
#endif
#ifdef USE_PN532_HSU
GPIO_PN532_TXD, // PN532 HSU Tx
GPIO_PN532_RXD, // PN532 HSU Rx
#endif
#ifdef USE_TASMOTA_SLAVE
GPIO_TASMOTASLAVE_TXD, // Tasmota Slave TX
GPIO_TASMOTASLAVE_RXD, // Tasmota Slave RX
GPIO_TASMOTASLAVE_RST, // Tasmota Slave Reset
GPIO_TASMOTASLAVE_RST_INV, // Tasmota Slave Reset Inverted
#endif
#ifdef USE_RDM6300
GPIO_RDM6300_RX,
#endif
#ifdef USE_IBEACON
GPIO_IBEACON_RX,
GPIO_IBEACON_TX,
#endif
#ifdef USE_GPS
GPIO_GPS_RX, // GPS serial interface
GPIO_GPS_TX, // GPS serial interface
#endif
#ifdef USE_HM10
GPIO_HM10_RX, // GPS serial interface
GPIO_HM10_TX, // GPS serial interface
#endif
#ifdef USE_MGC3130
GPIO_MGC3130_XFER,
GPIO_MGC3130_RESET,
#endif
#ifdef USE_MAX31855
GPIO_MAX31855CS, // MAX31855 Serial interface
GPIO_MAX31855CLK, // MAX31855 Serial interface
GPIO_MAX31855DO, // MAX31855 Serial interface
#endif
#ifdef ROTARY_V1
GPIO_ROT1A, // Rotary switch1 A Pin
GPIO_ROT1B, // Rotary switch1 B Pin
GPIO_ROT2A, // Rotary switch2 A Pin
GPIO_ROT2B, // Rotary switch2 B Pin
#endif
#ifdef USE_HRE
GPIO_HRE_CLOCK,
GPIO_HRE_DATA,
#endif
#ifdef USE_A4988_STEPPER
GPIO_A4988_DIR, // A4988 direction pin
GPIO_A4988_STP, // A4988 step pin
// folowing are not mandatory
GPIO_A4988_ENA, // A4988 enabled pin
GPIO_A4988_MS1, // A4988 microstep pin1
GPIO_A4988_MS2, // A4988 microstep pin2
GPIO_A4988_MS3, // A4988 microstep pin3
#endif
#ifdef USE_DEEPSLEEP
GPIO_DEEPSLEEP,
#endif
#ifdef USE_KEELOQ
GPIO_CC1101_GDO0, // CC1101 pin for RX
GPIO_CC1101_GDO2, // CC1101 pin for RX
#endif
#ifdef USE_HRXL
GPIO_HRXL_RX,
#endif
#ifdef USE_AS3935
GPIO_AS3935,
#endif
};
/********************************************************************************************/
// User selectable ADC0 functionality
enum UserSelectableAdc0 {
ADC0_NONE, // Not used
ADC0_INPUT, // Analog input
ADC0_TEMP, // Thermistor
ADC0_LIGHT, // Light sensor
ADC0_BUTTON, // Button
ADC0_BUTTON_INV,
ADC0_RANGE, // Range
ADC0_CT_POWER, // Current
// ADC0_SWITCH, // Switch
// ADC0_SWITCH_INV,
ADC0_END };
// Programmer selectable ADC0 functionality
enum ProgramSelectableAdc0 {
ADC0_FIX_START = 14,
ADC0_USER, // User configurable needs to be 15
ADC0_MAX };
// Text in webpage Module Parameters and commands ADC
const char kAdc0Names[] PROGMEM =
D_SENSOR_NONE "|" D_ANALOG_INPUT "|"
D_TEMPERATURE "|" D_LIGHT "|"
D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "i|"
D_RANGE "|"
D_CT_POWER "|"
// D_SENSOR_SWITCH "|" D_SENSOR_SWITCH "i|"
;
/********************************************************************************************/
// esp32 has more pins
#define USER_MODULE 255
#define MAX_GPIO_PIN 40 // Number of supported GPIO
#define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11)
#define MAX_USER_PINS 36 // MAX_GPIO_PIN - MIN_FLASH_PINS
#define ADC0_PIN 33 // Pin number of ADC0
#define WEMOS_MODULE 0 // Wemos module
// 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930313233343536373839
const char PINS_WEMOS[] PROGMEM = "IOTXIORXIOIOflashcFLFLolIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOA6A7A0IoIoA3";
/********************************************************************************************/
typedef struct MYIO {
uint8_t io[MAX_GPIO_PIN];
} myio;
typedef struct MYCFGIO {
uint8_t io[MAX_GPIO_PIN - MIN_FLASH_PINS];
} mycfgio;
#define GPIO_FLAG_USED 0 // Currently two flags used
#define GPIO_FLAG_SPARE04 16
#define GPIO_FLAG_SPARE05 32
#define GPIO_FLAG_SPARE06 64
#define GPIO_FLAG_SPARE07 128
typedef union {
uint8_t data;
struct {
uint8_t adc0 : 4; // Allow ADC0 when define USE_ADC_VCC is disabled
uint8_t spare04 : 1;
uint8_t spare05 : 1;
uint8_t spare06 : 1;
uint8_t spare07 : 1;
};
} gpio_flag;
typedef struct MYTMPLT {
mycfgio gp;
gpio_flag flag;
} mytmplt;
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
/********************************************************************************************/
// Supported hardware modules
Change ESP32 pin allocation part 1
2020-04-28 17:27:07 +01:00
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
enum SupportedModules {
Provide ESP32 base module support
2020-04-17 15:17:01 +01:00
WEMOS, ESP32_CAM_AITHINKER,
MAXMODULE};
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
Change ESP32 pin allocation part 1
2020-04-28 17:27:07 +01:00
#define USER_MODULE 255
Provide ESP32 base module support
2020-04-17 15:17:01 +01:00
const char kModuleNames[] PROGMEM =
"ESP32-DevKit|ESP32 Cam AiThinker";
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
// Default module settings
Provide ESP32 base module support
2020-04-17 15:17:01 +01:00
const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = {
WEMOS,
ESP32_CAM_AITHINKER
};
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
Provide ESP32 base module support
2020-04-17 15:17:01 +01:00
const mytmplt kModules PROGMEM =
{ // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32)
GPIO_USER, //0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
GPIO_USER, //1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
GPIO_USER, //2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
GPIO_USER, //3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
GPIO_USER, //4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
GPIO_USER, //5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
//6 IO GPIO6, Flash CLK
//7 IO GPIO7, Flash D0
//8 IO GPIO8, Flash D1
Add features to ESP32 - Decided to support ONLY flash mode DOUT (no software change but allows for RX1/TX1) - Add GPIO9 (RX1) and GPIO10 (TX1) for hardware serial support - Add above two GPIOs to template - Moved basic ADC0 support from GPIO36 to GPIO33
2020-04-18 17:10:41 +01:00
GPIO_USER, //9 IO GPIO9, Flash D2, U1RXD
GPIO_USER, //10 IO GPIO10, Flash D3, U1TXD
Provide ESP32 base module support
2020-04-17 15:17:01 +01:00
//11 IO GPIO11, Flash CMD
GPIO_USER, //12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
GPIO_USER, //13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
GPIO_USER, //14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
GPIO_USER, //15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
GPIO_USER, //16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
GPIO_USER, //17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
GPIO_USER, //18 IO GPIO18, VSPICLK, HS1_DATA7
GPIO_USER, //19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0
0, //20
GPIO_USER, //21 IO GPIO21, VSPIHD, EMAC_TX_EN
GPIO_USER, //22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1
GPIO_USER, //23 IO GPIO23, VSPID, HS1_STROBE
0, //24
GPIO_USER, //25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
GPIO_USER, //26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
GPIO_USER, //27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
0, //28
0, //29
0, //30
0, //31
GPIO_USER, //32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
GPIO_USER, //33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
GPIO_USER, //34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
GPIO_USER, //35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
GPIO_USER, //36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
0, //37 NO PULLUP
0, //38 NO PULLUP
GPIO_USER, //39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
0 // Flag
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
};
Change ESP32 pin allocation part 1
2020-04-28 17:27:07 +01:00
#else // FINAL_ESP32
#include "tasmota_template_ESP32_final.h"
#endif // FINAL_ESP32
Add experimental minimal support for ESP32 Add experimental minimal support for ESP32 (#8110)
2020-04-10 17:24:08 +01:00
#endif // ESP32
#endif // _TASMOTA_TEMPLATE_ESP32_H_