Tasmota/tasmota/xsns_42_scd30.ino

/*
  xsns_42_scd30.ino - SC30 CO2 sensor support for Tasmota

  Copyright (C) 2019 Frogmore42

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.

*/
#ifdef USE_I2C
#ifdef USE_SCD30

#define XSNS_42 42

#define SCD30_MAX_MISSED_READS 3
#define SONOFF_SCD30_STATE_NO_ERROR 0
#define SONOFF_SCD30_STATE_ERROR_DATA_CRC 1
#define SONOFF_SCD30_STATE_ERROR_READ_MEAS 2
#define SONOFF_SCD30_STATE_ERROR_SOFT_RESET 3
#define SONOFF_SCD30_STATE_ERROR_I2C_RESET 4
#define SONOFF_SCD30_STATE_ERROR_UNKNOWN 5

#include "Arduino.h"
#include <FrogmoreScd30.h>

#define D_CMND_SCD30 "SCD30"

const char S_JSON_SCD30_COMMAND_NVALUE[] PROGMEM = "{\"" D_CMND_SCD30 "%s\":%d}";
const char S_JSON_SCD30_COMMAND_NFW_VALUE[] PROGMEM = "{\"" D_CMND_SCD30 "%s\":%d.%d}";
const char S_JSON_SCD30_COMMAND[] PROGMEM        = "{\"" D_CMND_SCD30 "%s\"}";
const char kSCD30_Commands[] PROGMEM             = "Alt|Auto|Cal|FW|Int|Pres|TOff";

/*********************************************************************************************\
 * enumerationsines
\*********************************************************************************************/

enum SCD30_Commands {         // commands useable in console or rules
  CMND_SCD30_ALTITUDE,
  CMND_SCD30_AUTOMODE,
  CMND_SCD30_CALIBRATE,
  CMND_SCD30_FW,
  CMND_SCD30_INTERVAL,
  CMND_SCD30_PRESSURE,
  CMND_SCD30_TEMPOFFSET
};



FrogmoreScd30 scd30;

bool scd30Found = false;
bool scd30IsDataValid = false;
int scd30ErrorState = SONOFF_SCD30_STATE_NO_ERROR;
uint16_t scd30Interval_sec;
int scd30Loop_count = 0;
int scd30DataNotAvailable_count = 0;
int scd30GoodMeas_count = 0;
int scd30Reset_count = 0;
int scd30CrcError_count = 0;
int scd30Co2Zero_count = 0;
int i2cReset_count = 0;
uint16_t scd30_CO2 = 0;
uint16_t scd30_CO2EAvg = 0;
float scd30_Humid = 0.0;
float scd30_Temp = 0.0;

bool Scd30Init()
{
  int error;
  bool i2c_flg = ((pin[GPIO_I2C_SCL] < 99) && (pin[GPIO_I2C_SDA] < 99));
  if (i2c_flg)
  {
    uint8_t major = 0;
    uint8_t minor = 0;
    uint16_t interval_sec;
    scd30.begin();
    error = scd30.getFirmwareVersion(&major, &minor);
    if (error)
    {
#ifdef SCD30_DEBUG
      snprintf_P(log_data, sizeof(log_data), "SCD30: did not find an SCD30: 0x%lX", error);
      AddLog(LOG_LEVEL_DEBUG);
#endif
      return false;
    }
    else
    {
#ifdef SCD30_DEBUG
      snprintf_P(log_data, sizeof(log_data), "SCD30: found an SCD30: FW v%d.%d", major, minor);
      AddLog(LOG_LEVEL_INFO);
#endif
    }

    error = scd30.getMeasurementInterval(&scd30Interval_sec);
    if (error)
    {
#ifdef SCD30_DEBUG
      snprintf_P(log_data, sizeof(log_data), "SCD30: error getMeasurementInterval: 0x%lX", error);
      AddLog(LOG_LEVEL_ERROR);
#endif
      return false;
    }

    error = scd30.beginMeasuring();
    if (error)
    {
#ifdef SCD30_DEBUG
      snprintf_P(log_data, sizeof(log_data), "Error: Scd30BeginMeasuring: 0x%lX", error);
      AddLog(LOG_LEVEL_ERROR);
#endif
      return false;
    }

    return true;
    }
}

// gets data from the sensor every 3 seconds or so to give the sensor time to gather new data
int Scd30Update()
{
  int error = 0;
  int16_t delta = 0;
  scd30Loop_count++;

  if (!scd30Found)
  {
    scd30Found = Scd30Init();
#ifdef SCD30_DEBUG
    snprintf_P(log_data, sizeof(log_data), "Scd30Update: found: %d ", scd30Found);
    AddLog(LOG_LEVEL_INFO);
#endif
    if (!scd30Found)
    {
#ifdef SCD30_DEBUG
      snprintf_P(log_data, sizeof(log_data), "Scd30Update: found: %d ", scd30Found);
      AddLog(LOG_LEVEL_INFO);
#endif
      return (ERROR_SCD30_NOT_FOUND_ERROR);
    }
  }
  else
  {
    if (scd30Loop_count > (scd30Interval_sec - 1))
    {
      switch (scd30ErrorState)
      {
        case SONOFF_SCD30_STATE_NO_ERROR:
        {
          error = scd30.readMeasurement(&scd30_CO2, &scd30_CO2EAvg, &scd30_Temp, &scd30_Humid);
          switch (error)
          {
            case ERROR_SCD30_NO_ERROR:
              scd30Loop_count = 0;
              scd30IsDataValid = true;
              scd30GoodMeas_count++;
              break;

            case ERROR_SCD30_NO_DATA:
              scd30DataNotAvailable_count++;
              break;

            case ERROR_SCD30_CRC_ERROR:
              scd30ErrorState = SONOFF_SCD30_STATE_ERROR_DATA_CRC;
              scd30CrcError_count++;
#ifdef SCD30_DEBUG
              snprintf_P(log_data, sizeof(log_data), "SCD30: CRC error, CRC error: %ld, CO2 zero: %ld, good: %ld, no data: %ld, sc30_reset: %ld, i2c_reset: %ld", scd30CrcError_count, scd30Co2Zero_count, scd30GoodMeas_count, scd30DataNotAvailable_count, scd30Reset_count, i2cReset_count);
              AddLog(LOG_LEVEL_ERROR);
#endif
              break;

            case ERROR_SCD30_CO2_ZERO:
              scd30Co2Zero_count++;
#ifdef SCD30_DEBUG
              snprintf_P(log_data, sizeof(log_data), "SCD30: CO2 zero, CRC error: %ld, CO2 zero: %ld, good: %ld, no data: %ld, sc30_reset: %ld, i2c_reset: %ld", scd30CrcError_count, scd30Co2Zero_count, scd30GoodMeas_count, scd30DataNotAvailable_count, scd30Reset_count, i2cReset_count);
              AddLog(LOG_LEVEL_ERROR);
#endif
              break;

            default:
            {
              scd30ErrorState = SONOFF_SCD30_STATE_ERROR_READ_MEAS;
#ifdef SCD30_DEBUG
              snprintf_P(log_data, sizeof(log_data), "SCD30: Update: ReadMeasurement error: 0x%lX, counter: %ld", error, scd30Loop_count);
              AddLog(LOG_LEVEL_ERROR);
#endif
              return (error);
            }
            break;
          }
        }
        break;

        case SONOFF_SCD30_STATE_ERROR_DATA_CRC:
        {
          //scd30IsDataValid = false;
#ifdef SCD30_DEBUG
          snprintf_P(log_data, sizeof(log_data), "SCD30: in error state: %d, good: %ld, no data: %ld, sc30 reset: %ld, i2c reset: %ld", scd30ErrorState, scd30GoodMeas_count, scd30DataNotAvailable_count, scd30Reset_count, i2cReset_count);
          AddLog(LOG_LEVEL_ERROR);
          snprintf_P(log_data, sizeof(log_data), "SCD30: got CRC error, try again, counter: %ld", scd30Loop_count);
          AddLog(LOG_LEVEL_ERROR);
#endif
          scd30ErrorState = ERROR_SCD30_NO_ERROR;
        }
        break;

        case SONOFF_SCD30_STATE_ERROR_READ_MEAS:
        {
          //scd30IsDataValid = false;
#ifdef SCD30_DEBUG
          snprintf_P(log_data, sizeof(log_data), "SCD30: in error state: %d, good: %ld, no data: %ld, sc30 reset: %ld, i2c reset: %ld", scd30ErrorState, scd30GoodMeas_count, scd30DataNotAvailable_count, scd30Reset_count, i2cReset_count);
          AddLog(LOG_LEVEL_ERROR);
          snprintf_P(log_data, sizeof(log_data), "SCD30: not answering, sending soft reset, counter: %ld", scd30Loop_count);
          AddLog(LOG_LEVEL_ERROR);
#endif
          scd30Reset_count++;
          error = scd30.softReset();
          if (error)
          {
#ifdef SCD30_DEBUG
            snprintf_P(log_data, sizeof(log_data), "SCD30: resetting got error: 0x%lX", error);
            AddLog(LOG_LEVEL_ERROR);
#endif
            error >>= 8;
            if (error == 4)
            {
              scd30ErrorState = SONOFF_SCD30_STATE_ERROR_SOFT_RESET;
            }
            else
            {
              scd30ErrorState = SONOFF_SCD30_STATE_ERROR_UNKNOWN;
            }
          }
          else
          {
            scd30ErrorState = ERROR_SCD30_NO_ERROR;
          }
        }
        break;

        case SONOFF_SCD30_STATE_ERROR_SOFT_RESET:
        {
          //scd30IsDataValid = false;
#ifdef SCD30_DEBUG
          snprintf_P(log_data, sizeof(log_data), "SCD30: in error state: %d, good: %ld, no data: %ld, sc30 reset: %ld, i2c reset: %ld", scd30ErrorState, scd30GoodMeas_count, scd30DataNotAvailable_count, scd30Reset_count, i2cReset_count);
          AddLog(LOG_LEVEL_ERROR);
          snprintf_P(log_data, sizeof(log_data), "SCD30: clearing i2c bus");
          AddLog(LOG_LEVEL_ERROR);
#endif
          i2cReset_count++;
          error = scd30.clearI2CBus();
          if (error)
          {
            scd30ErrorState = SONOFF_SCD30_STATE_ERROR_I2C_RESET;
#ifdef SCD30_DEBUG
            snprintf_P(log_data, sizeof(log_data), "SCD30: error clearing i2c bus: 0x%lX", error);
            AddLog(LOG_LEVEL_ERROR);
#endif
          }
          else
          {
            scd30ErrorState = ERROR_SCD30_NO_ERROR;
          }
        }
        break;

        default:
        {
          //scd30IsDataValid = false;
#ifdef SCD30_DEBUG
          snprintf_P(log_data, sizeof(log_data), "SCD30: unknown error state: 0x%lX", scd30ErrorState);
          AddLog(LOG_LEVEL_ERROR);
#endif
          scd30ErrorState = SONOFF_SCD30_STATE_ERROR_SOFT_RESET; // try again
        }
      }

      if (scd30Loop_count > (SCD30_MAX_MISSED_READS * scd30Interval_sec))
      {
        scd30IsDataValid = false;
      }
    }
  }
  return (ERROR_SCD30_NO_ERROR);
}


int Scd30GetCommand(int command_code, uint16_t *pvalue)
{
  switch (command_code)
  {
    case CMND_SCD30_ALTITUDE:
      return scd30.getAltitudeCompensation(pvalue);
      break;

    case CMND_SCD30_AUTOMODE:
      return scd30.getCalibrationType(pvalue);
      break;

    case CMND_SCD30_CALIBRATE:
      return scd30.getForcedRecalibrationFactor(pvalue);
      break;

    case CMND_SCD30_INTERVAL:
      return scd30.getMeasurementInterval(pvalue);
      break;

    case CMND_SCD30_PRESSURE:
      return scd30.getAmbientPressure(pvalue);
      break;

    case CMND_SCD30_TEMPOFFSET:
      return scd30.getTemperatureOffset(pvalue);
      break;

      default:
        // else for Unknown command
      break;
  }
}

int Scd30SetCommand(int command_code, uint16_t value)
{
  switch (command_code)
  {
    case CMND_SCD30_ALTITUDE:
      return scd30.setAltitudeCompensation(value);
      break;

    case CMND_SCD30_AUTOMODE:
      return scd30.setCalibrationType(value);
      break;

    case CMND_SCD30_CALIBRATE:
      return scd30.setForcedRecalibrationFactor(value);
      break;

    case CMND_SCD30_INTERVAL:
    {
      int error = scd30.setMeasurementInterval(value);
      if (!error)
      {
        scd30Interval_sec = value;
      }

      return error;
    }
      break;

    case CMND_SCD30_PRESSURE:
      return scd30.setAmbientPressure(value);
      break;

    case CMND_SCD30_TEMPOFFSET:
      return scd30.setTemperatureOffset(value);
      break;

      default:
        // else for Unknown command
      break;
  }
}
/*********************************************************************************************\
 * Command Sensor92
\*********************************************************************************************/

bool Scd30CommandSensor()
{
  char command[CMDSZ];
  bool serviced = true;
  uint8_t prefix_len = strlen(D_CMND_SCD30);

  if (!strncasecmp_P(XdrvMailbox.topic, PSTR(D_CMND_SCD30), prefix_len)) {  // prefix
    int command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic + prefix_len, kSCD30_Commands);

    switch (command_code) {
      case CMND_SCD30_ALTITUDE:
      case CMND_SCD30_AUTOMODE:
      case CMND_SCD30_CALIBRATE:
      case CMND_SCD30_INTERVAL:
      case CMND_SCD30_PRESSURE:
      case CMND_SCD30_TEMPOFFSET:
      {
        uint16_t value = 0;
        if (XdrvMailbox.data_len > 0)
        {
          value = XdrvMailbox.payload;
          Scd30SetCommand(command_code, value);
        }
        else
        {
          Scd30GetCommand(command_code, &value);
        }

        Response_P(S_JSON_SCD30_COMMAND_NVALUE, command, value);
      }
        break;

      case CMND_SCD30_FW:
      {
        uint8_t major = 0;
        uint8_t minor = 0;
        int error;
        error = scd30.getFirmwareVersion(&major, &minor);
        if (error)
        {
#ifdef SCD30_DEBUG
          snprintf_P(log_data, sizeof(log_data), "SCD30: error getting FW version: 0x%lX", error);
          AddLog(LOG_LEVEL_ERROR);
#endif
          serviced = false;
        }
        else
        {
          Response_P(S_JSON_SCD30_COMMAND_NFW_VALUE, command, major, minor);
        }
      }
        break;

      default:
        // else for Unknown command
        serviced = false;
      break;
    }
  }
  return serviced;
}

void Scd30Show(bool json)
{
  char humidity[10];
  char temperature[10];

  if (scd30Found && scd30IsDataValid)
  {
    dtostrfd(ConvertHumidity(scd30_Humid), Settings.flag2.humidity_resolution, humidity);
    dtostrfd(ConvertTemp(scd30_Temp), Settings.flag2.temperature_resolution, temperature);
    if (json) {
      //ResponseAppend_P(PSTR(",\"SCD30\":{\"" D_JSON_CO2 "\":%d,\"" D_JSON_TEMPERATURE "\":%s,\"" D_JSON_HUMIDITY "\":%s}"), scd30_CO2, temperature, humidity);
      ResponseAppend_P(PSTR(",\"SCD30\":{\"" D_JSON_CO2 "\":%d,\"" D_JSON_ECO2 "\":%d,\"" D_JSON_TEMPERATURE "\":%s,\"" D_JSON_HUMIDITY "\":%s}"),
        scd30_CO2, scd30_CO2EAvg, temperature, humidity);
#ifdef USE_DOMOTICZ
      if (0 == tele_period)
      {
        DomoticzSensor(DZ_AIRQUALITY, scd30_CO2);
        DomoticzTempHumSensor(temperature, humidity);
      }
#endif  // USE_DOMOTICZ
#ifdef USE_WEBSERVER
    } else {
      WSContentSend_PD(HTTP_SNS_CO2EAVG, "SCD30", scd30_CO2EAvg);
      WSContentSend_PD(HTTP_SNS_CO2, "SCD30", scd30_CO2);
      WSContentSend_PD(HTTP_SNS_TEMP, "SCD30", temperature, TempUnit());
      WSContentSend_PD(HTTP_SNS_HUM, "SCD30", humidity);
#endif  // USE_WEBSERVER
    }
  }
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xsns42(byte function)
{
  bool result = false;

  if (i2c_flg) {
    switch (function) {
      case FUNC_EVERY_SECOND:
        Scd30Update();
        break;
      case FUNC_COMMAND:
        result = Scd30CommandSensor();
        break;
      case FUNC_JSON_APPEND:
        Scd30Show(1);
        break;
#ifdef USE_WEBSERVER
      case FUNC_WEB_SENSOR:
        Scd30Show(0);
        break;
#endif  // USE_WEBSERVER
    }
  }
  return result;
}

#endif  // USE_SCD30
#endif  // USE_I2C