Tasmota/sonoff/xdrv_02_mqtt.ino

1068 lines
39 KiB
Arduino
Raw Normal View History

/*
xdrv_02_mqtt.ino - mqtt support for Sonoff-Tasmota
Copyright (C) 2019 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define XDRV_02 2
2018-11-20 14:00:24 +00:00
#ifdef USE_MQTT_TLS
2019-06-05 10:44:52 +01:00
#include "WiFiClientSecureLightBearSSL.h"
BearSSL::WiFiClientSecure_light *tlsClient;
2018-11-20 14:00:24 +00:00
#else
WiFiClient EspClient; // Wifi Client
#endif
const char kMqttCommands[] PROGMEM =
#if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT)
D_CMND_MQTTFINGERPRINT "|"
#endif
#if !defined(USE_MQTT_TLS) || !defined(USE_MQTT_AWS_IOT) // user and password are disabled with AWS IoT
D_CMND_MQTTUSER "|" D_CMND_MQTTPASSWORD "|"
#endif
D_CMND_MQTTHOST "|" D_CMND_MQTTPORT "|" D_CMND_MQTTRETRY "|" D_CMND_STATETEXT "|" D_CMND_MQTTCLIENT "|"
D_CMND_FULLTOPIC "|" D_CMND_PREFIX "|" D_CMND_GROUPTOPIC "|" D_CMND_TOPIC "|" D_CMND_PUBLISH "|"
D_CMND_BUTTONTOPIC "|" D_CMND_SWITCHTOPIC "|" D_CMND_BUTTONRETAIN "|" D_CMND_SWITCHRETAIN "|" D_CMND_POWERRETAIN "|" D_CMND_SENSORRETAIN ;
void (* const MqttCommand[])(void) PROGMEM = {
#if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT)
&CmndMqttFingerprint,
#endif
#if !defined(USE_MQTT_TLS) || !defined(USE_MQTT_AWS_IOT) // user and password are disabled with AWS IoT
&CmndMqttUser, &CmndMqttPassword,
#endif
&CmndMqttHost, &CmndMqttPort, &CmndMqttRetry, &CmndStateText, &CmndMqttClient,
&CmndFullTopic, &CmndPrefix, &CmndGroupTopic, &CmndTopic, &CmndPublish,
&CmndButtonTopic, &CmndSwitchTopic, &CmndButtonRetain, &CmndSwitchRetain, &CmndPowerRetain, &CmndSensorRetain };
IPAddress mqtt_host_addr; // MQTT host IP address
uint32_t mqtt_host_hash = 0; // MQTT host name hash
uint16_t mqtt_connect_count = 0; // MQTT re-connect count
uint16_t mqtt_retry_counter = 1; // MQTT connection retry counter
uint8_t mqtt_initial_connection_state = 2; // MQTT connection messages state
bool mqtt_connected = false; // MQTT virtual connection status
bool mqtt_allowed = false; // MQTT enabled and parameters valid
#ifdef USE_MQTT_TLS
// see https://stackoverflow.com/questions/6357031/how-do-you-convert-a-byte-array-to-a-hexadecimal-string-in-c
void to_hex(unsigned char * in, size_t insz, char * out, size_t outsz) {
unsigned char * pin = in;
static const char * hex = "0123456789ABCDEF";
char * pout = out;
for (; pin < in+insz; pout +=3, pin++) {
pout[0] = hex[(*pin>>4) & 0xF];
pout[1] = hex[ *pin & 0xF];
pout[2] = ' ';
if (pout + 3 - out > outsz){
/* Better to truncate output string than overflow buffer */
/* it would be still better to either return a status */
/* or ensure the target buffer is large enough and it never happen */
break;
}
}
pout[-1] = 0;
}
2019-06-05 10:44:52 +01:00
#ifdef USE_MQTT_AWS_IOT
2019-06-05 10:44:52 +01:00
namespace aws_iot_privkey {
// this is where the Private Key and Certificate are stored
extern const br_ec_private_key *AWS_IoT_Private_Key;
extern const br_x509_certificate *AWS_IoT_Client_Certificate;
}
#endif
2019-06-05 10:44:52 +01:00
// A typical AWS IoT endpoint is 50 characters long, it does not fit
// in MqttHost field (32 chars). We need to concatenate both MqttUser and MqttHost
char AWS_endpoint[65]; // aWS IOT endpoint, concatenation of user and host
// check whether the fingerprint is filled with a single value
// Filled with 0x00 = accept any fingerprint and learn it for next time
// Filled with 0xFF = accept any fingerpring forever
bool is_fingerprint_mono_value(uint8_t finger[20], uint8_t value) {
for (uint32_t i = 0; i<20; i++) {
if (finger[i] != value) {
return false;
}
}
return true;
}
#ifdef USE_MQTT_AWS_IOT
void setLongMqttHost(const char *mqtt_host) {
if (strlen(mqtt_host) <= sizeof(Settings.mqtt_host)) {
strlcpy(Settings.mqtt_host, mqtt_host, sizeof(Settings.mqtt_host));
Settings.mqtt_user[0] = 0;
} else {
// need to split in mqtt_user first then mqtt_host
strlcpy(Settings.mqtt_user, mqtt_host, sizeof(Settings.mqtt_user));
strlcpy(Settings.mqtt_host, &mqtt_host[sizeof(Settings.mqtt_user)-1], sizeof(Settings.mqtt_host));
}
strlcpy(AWS_endpoint, mqtt_host, sizeof(AWS_endpoint));
}
#endif // USE_MQTT_AWS_IOT
#endif // USE_MQTT_TLS
2019-06-05 10:44:52 +01:00
void MakeValidMqtt(uint32_t option, char* str)
{
// option 0 = replace by underscore
// option 1 = delete character
uint32_t i = 0;
while (str[i] > 0) {
// if ((str[i] == '/') || (str[i] == '+') || (str[i] == '#') || (str[i] == ' ')) {
if ((str[i] == '+') || (str[i] == '#') || (str[i] == ' ')) {
if (option) {
uint32_t j = i;
while (str[j] > 0) {
str[j] = str[j +1];
j++;
}
i--;
} else {
str[i] = '_';
}
}
i++;
}
}
#ifdef USE_DISCOVERY
#ifdef MQTT_HOST_DISCOVERY
void MqttDiscoverServer(void)
{
if (!mdns_begun) { return; }
int n = MDNS.queryService("mqtt", "tcp"); // Search for mqtt service
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MDNS D_QUERY_DONE " %d"), n);
if (n > 0) {
uint32_t i = 0; // If the hostname isn't set, use the first record found.
#ifdef MDNS_HOSTNAME
for (i = n; i > 0; i--) { // Search from last to first and use first if not found
if (!strcmp(MDNS.hostname(i).c_str(), MDNS_HOSTNAME)) {
break; // Stop at matching record
}
}
#endif // MDNS_HOSTNAME
snprintf_P(Settings.mqtt_host, sizeof(Settings.mqtt_host), MDNS.IP(i).toString().c_str());
Settings.mqtt_port = MDNS.port(i);
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MDNS D_MQTT_SERVICE_FOUND " %s, " D_IP_ADDRESS " %s, " D_PORT " %d"), MDNS.hostname(i).c_str(), Settings.mqtt_host, Settings.mqtt_port);
}
}
#endif // MQTT_HOST_DISCOVERY
#endif // USE_DISCOVERY
/*********************************************************************************************\
* MQTT driver specific code need to provide the following functions:
*
* bool MqttIsConnected()
* void MqttDisconnect()
* void MqttSubscribeLib(char *topic)
* bool MqttPublishLib(const char* topic, bool retained)
\*********************************************************************************************/
#include <PubSubClient.h>
// Max message size calculated by PubSubClient is (MQTT_MAX_PACKET_SIZE < 5 + 2 + strlen(topic) + plength)
#if (MQTT_MAX_PACKET_SIZE -TOPSZ -7) < MIN_MESSZ // If the max message size is too small, throw an error at compile time. See PubSubClient.cpp line 359
#error "MQTT_MAX_PACKET_SIZE is too small in libraries/PubSubClient/src/PubSubClient.h, increase it to at least 1000"
#endif
#ifdef USE_MQTT_TLS
2019-06-05 10:44:52 +01:00
PubSubClient MqttClient;
#else
PubSubClient MqttClient(EspClient);
2019-06-05 10:44:52 +01:00
#endif
void MqttInit(void)
{
#ifdef USE_MQTT_TLS
tlsClient = new BearSSL::WiFiClientSecure_light(1024,1024);
2019-06-05 10:44:52 +01:00
#ifdef USE_MQTT_AWS_IOT
snprintf(AWS_endpoint, sizeof(AWS_endpoint), PSTR("%s%s"), Settings.mqtt_user, Settings.mqtt_host);
2019-06-05 10:44:52 +01:00
tlsClient->setClientECCert(aws_iot_privkey::AWS_IoT_Client_Certificate,
2019-06-05 10:44:52 +01:00
aws_iot_privkey::AWS_IoT_Private_Key,
0xFFFF /* all usages, don't care */, 0);
#endif
2019-06-05 10:44:52 +01:00
#ifdef USE_MQTT_TLS_CA_CERT
#ifdef USE_MQTT_AWS_IOT
tlsClient->setTrustAnchor(&AmazonRootCA1_TA);
#else
2019-06-10 19:04:34 +01:00
tlsClient->setTrustAnchor(&LetsEncryptX3CrossSigned_TA);
#endif // USE_MQTT_AWS_IOT
#endif // USE_MQTT_TLS_CA_CERT
MqttClient.setClient(*tlsClient);
#endif // USE_MQTT_TLS
2019-06-05 10:44:52 +01:00
}
2018-11-14 13:32:09 +00:00
bool MqttIsConnected(void)
{
return MqttClient.connected();
}
2018-11-14 13:32:09 +00:00
void MqttDisconnect(void)
{
MqttClient.disconnect();
}
Rules: Trigger Event with MQTT Subscriptions Support subscribe/unsubscribe MQTT topics and trigger specified event with the subscribed MQTT topic. You can subscribe a MQTT topic and assign an event name. Once we received subscribed MQTT message, an event will be automatically triggered. So you can set up a rule with "ON EVENT#<event_name> DO ..." to do whatever you want based on this MQTT message. The payload is passed as a parameter once the event been triggered. If the payload is in JSON format, you are able to get the value of specified key as parameter. For example, if you have a Tasmota based thermostat and multiple temperature sensors in different place, usually you have to set up a centre home automation system like Domoticz to control the thermostat. Right now, with this new feature, you can write a rule to do this. Two new commands in Rules: 1. Subscribe Subscribe a MQTT topic (with or without key) and assign an event name to it. Command format: Subscribe [<event_name>, <topic> [, <key>]] This command will subscribe a <topic> and give it an event name <event_name>. The optional parameter <key> is for parse the specified key/value from MQTT message payload with JSON format. In order to parse value from two level JSON data, you can use one dot (".") to split the key into two section. Subscribe command without any parameter will list all topics currently subscribed. 2. Unsubscribe Unsubscribe specified MQTT event. Command format: Unsubscribe [<event_name>] Unsubscribe a topic subscribed by specify the event name. If no event specified, Unsubscribe all topics subscribed. Examples: 1. Subscribe BkLight, Tasmota/BackyardLight/stat/POWER And define a rule like: Rule1 on event#BkLight=ON do ruletimer4 60 endon 2. Subscribe DnTemp, Tasmota/RoomSensor1/stat/SENSOR, DS18B20.Temperature Define a rule to deal with the MQTT message like {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}} Rule1 ON EVENT#DnTemp>=21 DO ... ENDON
2019-02-24 03:33:09 +00:00
void MqttSubscribeLib(const char *topic)
{
MqttClient.subscribe(topic);
MqttClient.loop(); // Solve LmacRxBlk:1 messages
}
Rules: Trigger Event with MQTT Subscriptions Support subscribe/unsubscribe MQTT topics and trigger specified event with the subscribed MQTT topic. You can subscribe a MQTT topic and assign an event name. Once we received subscribed MQTT message, an event will be automatically triggered. So you can set up a rule with "ON EVENT#<event_name> DO ..." to do whatever you want based on this MQTT message. The payload is passed as a parameter once the event been triggered. If the payload is in JSON format, you are able to get the value of specified key as parameter. For example, if you have a Tasmota based thermostat and multiple temperature sensors in different place, usually you have to set up a centre home automation system like Domoticz to control the thermostat. Right now, with this new feature, you can write a rule to do this. Two new commands in Rules: 1. Subscribe Subscribe a MQTT topic (with or without key) and assign an event name to it. Command format: Subscribe [<event_name>, <topic> [, <key>]] This command will subscribe a <topic> and give it an event name <event_name>. The optional parameter <key> is for parse the specified key/value from MQTT message payload with JSON format. In order to parse value from two level JSON data, you can use one dot (".") to split the key into two section. Subscribe command without any parameter will list all topics currently subscribed. 2. Unsubscribe Unsubscribe specified MQTT event. Command format: Unsubscribe [<event_name>] Unsubscribe a topic subscribed by specify the event name. If no event specified, Unsubscribe all topics subscribed. Examples: 1. Subscribe BkLight, Tasmota/BackyardLight/stat/POWER And define a rule like: Rule1 on event#BkLight=ON do ruletimer4 60 endon 2. Subscribe DnTemp, Tasmota/RoomSensor1/stat/SENSOR, DS18B20.Temperature Define a rule to deal with the MQTT message like {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}} Rule1 ON EVENT#DnTemp>=21 DO ... ENDON
2019-02-24 03:33:09 +00:00
void MqttUnsubscribeLib(const char *topic)
{
MqttClient.unsubscribe(topic);
MqttClient.loop(); // Solve LmacRxBlk:1 messages
}
bool MqttPublishLib(const char* topic, bool retained)
{
bool result = MqttClient.publish(topic, mqtt_data, retained);
yield(); // #3313
return result;
}
void MqttDataHandler(char* topic, uint8_t* data, unsigned int data_len)
{
#ifdef USE_DEBUG_DRIVER
ShowFreeMem(PSTR("MqttDataHandler"));
#endif
// Do not allow more data than would be feasable within stack space
if (data_len >= MQTT_MAX_PACKET_SIZE) { return; }
// Do not execute multiple times if Prefix1 equals Prefix2
if (!strcmp(Settings.mqtt_prefix[0], Settings.mqtt_prefix[1])) {
char *str = strstr(topic, Settings.mqtt_prefix[0]);
if ((str == topic) && mqtt_cmnd_publish) {
if (mqtt_cmnd_publish > 3) {
mqtt_cmnd_publish -= 3;
} else {
mqtt_cmnd_publish = 0;
}
return;
}
}
data[data_len] = 0;
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR(D_LOG_MQTT D_RECEIVED_TOPIC " %s, " D_DATA_SIZE " %d, " D_DATA " %s"), topic, data_len, data);
// if (LOG_LEVEL_DEBUG_MORE <= seriallog_level) { Serial.println(dataBuf); }
// MQTT pre-processing
if (XdrvMqttData(topic, strlen(topic), (char*)data, data_len)) { return; }
ShowSource(SRC_MQTT);
CommandHandler(topic, data, data_len);
}
/*********************************************************************************************/
void MqttRetryCounter(uint8_t value)
{
mqtt_retry_counter = value;
}
Rules: Trigger Event with MQTT Subscriptions Support subscribe/unsubscribe MQTT topics and trigger specified event with the subscribed MQTT topic. You can subscribe a MQTT topic and assign an event name. Once we received subscribed MQTT message, an event will be automatically triggered. So you can set up a rule with "ON EVENT#<event_name> DO ..." to do whatever you want based on this MQTT message. The payload is passed as a parameter once the event been triggered. If the payload is in JSON format, you are able to get the value of specified key as parameter. For example, if you have a Tasmota based thermostat and multiple temperature sensors in different place, usually you have to set up a centre home automation system like Domoticz to control the thermostat. Right now, with this new feature, you can write a rule to do this. Two new commands in Rules: 1. Subscribe Subscribe a MQTT topic (with or without key) and assign an event name to it. Command format: Subscribe [<event_name>, <topic> [, <key>]] This command will subscribe a <topic> and give it an event name <event_name>. The optional parameter <key> is for parse the specified key/value from MQTT message payload with JSON format. In order to parse value from two level JSON data, you can use one dot (".") to split the key into two section. Subscribe command without any parameter will list all topics currently subscribed. 2. Unsubscribe Unsubscribe specified MQTT event. Command format: Unsubscribe [<event_name>] Unsubscribe a topic subscribed by specify the event name. If no event specified, Unsubscribe all topics subscribed. Examples: 1. Subscribe BkLight, Tasmota/BackyardLight/stat/POWER And define a rule like: Rule1 on event#BkLight=ON do ruletimer4 60 endon 2. Subscribe DnTemp, Tasmota/RoomSensor1/stat/SENSOR, DS18B20.Temperature Define a rule to deal with the MQTT message like {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}} Rule1 ON EVENT#DnTemp>=21 DO ... ENDON
2019-02-24 03:33:09 +00:00
void MqttSubscribe(const char *topic)
{
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT D_SUBSCRIBE_TO " %s"), topic);
MqttSubscribeLib(topic);
}
Rules: Trigger Event with MQTT Subscriptions Support subscribe/unsubscribe MQTT topics and trigger specified event with the subscribed MQTT topic. You can subscribe a MQTT topic and assign an event name. Once we received subscribed MQTT message, an event will be automatically triggered. So you can set up a rule with "ON EVENT#<event_name> DO ..." to do whatever you want based on this MQTT message. The payload is passed as a parameter once the event been triggered. If the payload is in JSON format, you are able to get the value of specified key as parameter. For example, if you have a Tasmota based thermostat and multiple temperature sensors in different place, usually you have to set up a centre home automation system like Domoticz to control the thermostat. Right now, with this new feature, you can write a rule to do this. Two new commands in Rules: 1. Subscribe Subscribe a MQTT topic (with or without key) and assign an event name to it. Command format: Subscribe [<event_name>, <topic> [, <key>]] This command will subscribe a <topic> and give it an event name <event_name>. The optional parameter <key> is for parse the specified key/value from MQTT message payload with JSON format. In order to parse value from two level JSON data, you can use one dot (".") to split the key into two section. Subscribe command without any parameter will list all topics currently subscribed. 2. Unsubscribe Unsubscribe specified MQTT event. Command format: Unsubscribe [<event_name>] Unsubscribe a topic subscribed by specify the event name. If no event specified, Unsubscribe all topics subscribed. Examples: 1. Subscribe BkLight, Tasmota/BackyardLight/stat/POWER And define a rule like: Rule1 on event#BkLight=ON do ruletimer4 60 endon 2. Subscribe DnTemp, Tasmota/RoomSensor1/stat/SENSOR, DS18B20.Temperature Define a rule to deal with the MQTT message like {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}} Rule1 ON EVENT#DnTemp>=21 DO ... ENDON
2019-02-24 03:33:09 +00:00
void MqttUnsubscribe(const char *topic)
{
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT D_UNSUBSCRIBE_FROM " %s"), topic);
Rules: Trigger Event with MQTT Subscriptions Support subscribe/unsubscribe MQTT topics and trigger specified event with the subscribed MQTT topic. You can subscribe a MQTT topic and assign an event name. Once we received subscribed MQTT message, an event will be automatically triggered. So you can set up a rule with "ON EVENT#<event_name> DO ..." to do whatever you want based on this MQTT message. The payload is passed as a parameter once the event been triggered. If the payload is in JSON format, you are able to get the value of specified key as parameter. For example, if you have a Tasmota based thermostat and multiple temperature sensors in different place, usually you have to set up a centre home automation system like Domoticz to control the thermostat. Right now, with this new feature, you can write a rule to do this. Two new commands in Rules: 1. Subscribe Subscribe a MQTT topic (with or without key) and assign an event name to it. Command format: Subscribe [<event_name>, <topic> [, <key>]] This command will subscribe a <topic> and give it an event name <event_name>. The optional parameter <key> is for parse the specified key/value from MQTT message payload with JSON format. In order to parse value from two level JSON data, you can use one dot (".") to split the key into two section. Subscribe command without any parameter will list all topics currently subscribed. 2. Unsubscribe Unsubscribe specified MQTT event. Command format: Unsubscribe [<event_name>] Unsubscribe a topic subscribed by specify the event name. If no event specified, Unsubscribe all topics subscribed. Examples: 1. Subscribe BkLight, Tasmota/BackyardLight/stat/POWER And define a rule like: Rule1 on event#BkLight=ON do ruletimer4 60 endon 2. Subscribe DnTemp, Tasmota/RoomSensor1/stat/SENSOR, DS18B20.Temperature Define a rule to deal with the MQTT message like {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}} Rule1 ON EVENT#DnTemp>=21 DO ... ENDON
2019-02-24 03:33:09 +00:00
MqttUnsubscribeLib(topic);
}
void MqttPublishDirect(const char* topic, bool retained)
{
char sretained[CMDSZ];
char slog_type[10];
2019-03-11 09:38:41 +00:00
#ifdef USE_DEBUG_DRIVER
ShowFreeMem(PSTR("MqttPublishDirect"));
2019-03-11 09:38:41 +00:00
#endif
sretained[0] = '\0';
snprintf_P(slog_type, sizeof(slog_type), PSTR(D_LOG_RESULT));
if (Settings.flag.mqtt_enabled) {
if (MqttIsConnected()) {
if (MqttPublishLib(topic, retained)) {
snprintf_P(slog_type, sizeof(slog_type), PSTR(D_LOG_MQTT));
if (retained) {
snprintf_P(sretained, sizeof(sretained), PSTR(" (" D_RETAINED ")"));
}
}
}
}
snprintf_P(log_data, sizeof(log_data), PSTR("%s%s = %s"), slog_type, (Settings.flag.mqtt_enabled) ? topic : strrchr(topic,'/')+1, mqtt_data);
if (strlen(log_data) >= (sizeof(log_data) - strlen(sretained) -1)) {
log_data[sizeof(log_data) - strlen(sretained) -5] = '\0';
snprintf_P(log_data, sizeof(log_data), PSTR("%s ..."), log_data);
}
snprintf_P(log_data, sizeof(log_data), PSTR("%s%s"), log_data, sretained);
AddLog(LOG_LEVEL_INFO);
if (Settings.ledstate &0x04) {
blinks++;
}
}
void MqttPublish(const char* topic, bool retained)
{
char *me;
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
if (retained) {
AddLog_P(LOG_LEVEL_INFO, S_LOG_MQTT, PSTR("Retained are not supported by AWS IoT, using retained = false."));
}
2019-06-05 10:44:52 +01:00
retained = false; // AWS IoT does not support retained, it will disconnect if received
#endif
if (!strcmp(Settings.mqtt_prefix[0],Settings.mqtt_prefix[1])) {
me = strstr(topic,Settings.mqtt_prefix[0]);
if (me == topic) {
mqtt_cmnd_publish += 3;
}
}
MqttPublishDirect(topic, retained);
}
void MqttPublish(const char* topic)
{
MqttPublish(topic, false);
}
void MqttPublishPrefixTopic_P(uint32_t prefix, const char* subtopic, bool retained)
{
/* prefix 0 = cmnd using subtopic
* prefix 1 = stat using subtopic
* prefix 2 = tele using subtopic
* prefix 4 = cmnd using subtopic or RESULT
* prefix 5 = stat using subtopic or RESULT
* prefix 6 = tele using subtopic or RESULT
*/
char romram[33];
char stopic[TOPSZ];
snprintf_P(romram, sizeof(romram), ((prefix > 3) && !Settings.flag.mqtt_response) ? S_RSLT_RESULT : subtopic);
for (uint32_t i = 0; i < strlen(romram); i++) {
romram[i] = toupper(romram[i]);
}
prefix &= 3;
GetTopic_P(stopic, prefix, mqtt_topic, romram);
MqttPublish(stopic, retained);
}
void MqttPublishPrefixTopic_P(uint32_t prefix, const char* subtopic)
{
MqttPublishPrefixTopic_P(prefix, subtopic, false);
}
void MqttPublishPowerState(uint32_t device)
{
char stopic[TOPSZ];
char scommand[33];
if ((device < 1) || (device > devices_present)) { device = 1; }
#ifdef USE_SONOFF_IFAN
if (IsModuleIfan() && (device > 1)) {
if (GetFanspeed() < MaxFanspeed()) { // 4 occurs when fanspeed is 3 and RC button 2 is pressed
#ifdef USE_DOMOTICZ
DomoticzUpdateFanState(); // RC Button feedback
#endif // USE_DOMOTICZ
snprintf_P(scommand, sizeof(scommand), PSTR(D_CMND_FANSPEED));
GetTopic_P(stopic, STAT, mqtt_topic, (Settings.flag.mqtt_response) ? scommand : S_RSLT_RESULT);
Response_P(S_JSON_COMMAND_NVALUE, scommand, GetFanspeed());
MqttPublish(stopic);
}
} else {
#endif // USE_SONOFF_IFAN
GetPowerDevice(scommand, device, sizeof(scommand), Settings.flag.device_index_enable);
GetTopic_P(stopic, STAT, mqtt_topic, (Settings.flag.mqtt_response) ? scommand : S_RSLT_RESULT);
Response_P(S_JSON_COMMAND_SVALUE, scommand, GetStateText(bitRead(power, device -1)));
MqttPublish(stopic);
GetTopic_P(stopic, STAT, mqtt_topic, scommand);
Response_P(GetStateText(bitRead(power, device -1)));
MqttPublish(stopic, Settings.flag.mqtt_power_retain);
#ifdef USE_SONOFF_IFAN
}
#endif // USE_SONOFF_IFAN
}
void MqttPublishAllPowerState()
{
for (uint32_t i = 1; i <= devices_present; i++) {
MqttPublishPowerState(i);
#ifdef USE_SONOFF_IFAN
if (IsModuleIfan()) { break; } // Report status of light relay only
#endif // USE_SONOFF_IFAN
}
}
void MqttPublishPowerBlinkState(uint32_t device)
{
char scommand[33];
if ((device < 1) || (device > devices_present)) {
device = 1;
}
Response_P(PSTR("{\"%s\":\"" D_JSON_BLINK " %s\"}"),
GetPowerDevice(scommand, device, sizeof(scommand), Settings.flag.device_index_enable), GetStateText(bitRead(blink_mask, device -1)));
MqttPublishPrefixTopic_P(RESULT_OR_STAT, S_RSLT_POWER);
}
/*********************************************************************************************/
uint16_t MqttConnectCount()
{
return mqtt_connect_count;
}
void MqttDisconnected(int state)
{
mqtt_connected = false;
mqtt_retry_counter = Settings.mqtt_retry;
MqttClient.disconnect();
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
2019-06-05 10:44:52 +01:00
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT D_CONNECT_FAILED_TO " %s:%d, rc %d. " D_RETRY_IN " %d " D_UNIT_SECOND), AWS_endpoint, Settings.mqtt_port, state, mqtt_retry_counter);
#else
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT D_CONNECT_FAILED_TO " %s:%d, rc %d. " D_RETRY_IN " %d " D_UNIT_SECOND), Settings.mqtt_host, Settings.mqtt_port, state, mqtt_retry_counter);
2019-06-05 10:44:52 +01:00
#endif
rules_flag.mqtt_disconnected = 1;
}
2018-11-14 13:32:09 +00:00
void MqttConnected(void)
{
char stopic[TOPSZ];
if (mqtt_allowed) {
AddLog_P(LOG_LEVEL_INFO, S_LOG_MQTT, PSTR(D_CONNECTED));
mqtt_connected = true;
mqtt_retry_counter = 0;
mqtt_connect_count++;
GetTopic_P(stopic, TELE, mqtt_topic, S_LWT);
Response_P(PSTR(D_ONLINE));
MqttPublish(stopic, true);
// Satisfy iobroker (#299)
mqtt_data[0] = '\0';
MqttPublishPrefixTopic_P(CMND, S_RSLT_POWER);
GetTopic_P(stopic, CMND, mqtt_topic, PSTR("#"));
MqttSubscribe(stopic);
if (strstr_P(Settings.mqtt_fulltopic, MQTT_TOKEN_TOPIC) != nullptr) {
GetTopic_P(stopic, CMND, Settings.mqtt_grptopic, PSTR("#"));
MqttSubscribe(stopic);
GetFallbackTopic_P(stopic, CMND, PSTR("#"));
MqttSubscribe(stopic);
}
XdrvCall(FUNC_MQTT_SUBSCRIBE);
}
if (mqtt_initial_connection_state) {
Response_P(PSTR("{\"" D_CMND_MODULE "\":\"%s\",\"" D_JSON_VERSION "\":\"%s%s\",\"" D_JSON_FALLBACKTOPIC "\":\"%s\",\"" D_CMND_GROUPTOPIC "\":\"%s\"}"),
2018-12-29 16:19:13 +00:00
ModuleName().c_str(), my_version, my_image, GetFallbackTopic_P(stopic, CMND, ""), Settings.mqtt_grptopic);
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_INFO "1"));
#ifdef USE_WEBSERVER
if (Settings.webserver) {
Response_P(PSTR("{\"" D_JSON_WEBSERVER_MODE "\":\"%s\",\"" D_CMND_HOSTNAME "\":\"%s\",\"" D_CMND_IPADDRESS "\":\"%s\"}"),
(2 == Settings.webserver) ? D_ADMIN : D_USER, my_hostname, WiFi.localIP().toString().c_str());
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_INFO "2"));
}
#endif // USE_WEBSERVER
Response_P(PSTR("{\"" D_JSON_RESTARTREASON "\":\"%s\"}"), (GetResetReason() == "Exception") ? ESP.getResetInfo().c_str() : GetResetReason().c_str());
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_INFO "3"));
MqttPublishAllPowerState();
if (Settings.tele_period) { tele_period = Settings.tele_period -9; } // Enable TelePeriod in 9 seconds
rules_flag.system_boot = 1;
XdrvCall(FUNC_MQTT_INIT);
}
mqtt_initial_connection_state = 0;
global_state.mqtt_down = 0;
if (Settings.flag.mqtt_enabled) {
rules_flag.mqtt_connected = 1;
}
}
2018-11-14 13:32:09 +00:00
void MqttReconnect(void)
{
char stopic[TOPSZ];
mqtt_allowed = Settings.flag.mqtt_enabled;
if (mqtt_allowed) {
#ifdef USE_DISCOVERY
#ifdef MQTT_HOST_DISCOVERY
MqttDiscoverServer();
#endif // MQTT_HOST_DISCOVERY
#endif // USE_DISCOVERY
if (!strlen(Settings.mqtt_host) || !Settings.mqtt_port) {
mqtt_allowed = false;
}
}
if (!mqtt_allowed) {
MqttConnected();
return;
}
#ifdef USE_EMULATION
UdpDisconnect();
#endif // USE_EMULATION
AddLog_P(LOG_LEVEL_INFO, S_LOG_MQTT, PSTR(D_ATTEMPTING_CONNECTION));
mqtt_connected = false;
mqtt_retry_counter = Settings.mqtt_retry;
global_state.mqtt_down = 1;
char *mqtt_user = nullptr;
char *mqtt_pwd = nullptr;
if (strlen(Settings.mqtt_user) > 0) mqtt_user = Settings.mqtt_user;
if (strlen(Settings.mqtt_pwd) > 0) mqtt_pwd = Settings.mqtt_pwd;
GetTopic_P(stopic, TELE, mqtt_topic, S_LWT);
Response_P(S_OFFLINE);
if (MqttClient.connected()) { MqttClient.disconnect(); }
#ifdef USE_MQTT_TLS
tlsClient->stop();
#else
EspClient = WiFiClient(); // Wifi Client reconnect issue 4497 (https://github.com/esp8266/Arduino/issues/4497)
MqttClient.setClient(EspClient);
#endif
if (2 == mqtt_initial_connection_state) { // Executed once just after power on and wifi is connected
mqtt_initial_connection_state = 1;
}
MqttClient.setCallback(MqttDataHandler);
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
2019-06-05 10:44:52 +01:00
MqttClient.setServer(AWS_endpoint, Settings.mqtt_port);
#else
MqttClient.setServer(Settings.mqtt_host, Settings.mqtt_port);
2019-06-05 10:44:52 +01:00
#endif
uint32_t mqtt_connect_time = millis();
#if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT)
2019-06-05 10:44:52 +01:00
bool allow_all_fingerprints = false;
bool learn_fingerprint1 = is_fingerprint_mono_value(Settings.mqtt_fingerprint[0], 0x00);
bool learn_fingerprint2 = is_fingerprint_mono_value(Settings.mqtt_fingerprint[1], 0x00);
allow_all_fingerprints |= is_fingerprint_mono_value(Settings.mqtt_fingerprint[0], 0xff);
allow_all_fingerprints |= is_fingerprint_mono_value(Settings.mqtt_fingerprint[1], 0xff);
allow_all_fingerprints |= learn_fingerprint1;
allow_all_fingerprints |= learn_fingerprint2;
tlsClient->setPubKeyFingerprint(Settings.mqtt_fingerprint[0], Settings.mqtt_fingerprint[1], allow_all_fingerprints);
#endif
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
2019-06-05 10:44:52 +01:00
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "AWS IoT endpoint: %s"), AWS_endpoint);
//if (MqttClient.connect(mqtt_client, nullptr, nullptr, nullptr, 0, false, nullptr)) {
if (MqttClient.connect(mqtt_client, nullptr, nullptr, stopic, 1, false, mqtt_data, MQTT_CLEAN_SESSION)) {
2019-06-05 10:44:52 +01:00
#else
if (MqttClient.connect(mqtt_client, mqtt_user, mqtt_pwd, stopic, 1, true, mqtt_data, MQTT_CLEAN_SESSION)) {
2019-06-05 10:44:52 +01:00
#endif
#ifdef USE_MQTT_TLS
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "TLS connected in %d ms, max ThunkStack used %d"),
millis() - mqtt_connect_time, tlsClient->getMaxThunkStackUse());
if (!tlsClient->getMFLNStatus()) {
AddLog_P(LOG_LEVEL_INFO, S_LOG_MQTT, PSTR("MFLN not supported by TLS server"));
}
#ifndef USE_MQTT_TLS_CA_CERT // don't bother with fingerprints if using CA validation
// create a printable version of the fingerprint received
char buf_fingerprint[64];
to_hex((unsigned char *)tlsClient->getRecvPubKeyFingerprint(), 20, buf_fingerprint, 64);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_MQTT "Server fingerprint: %s"), buf_fingerprint);
2019-06-05 10:44:52 +01:00
if (learn_fingerprint1 || learn_fingerprint2) {
// we potentially need to learn the fingerprint just seen
bool fingerprint_matched = false;
const uint8_t *recv_fingerprint = tlsClient->getRecvPubKeyFingerprint();
2019-06-05 10:44:52 +01:00
if (0 == memcmp(recv_fingerprint, Settings.mqtt_fingerprint[0], 20)) {
fingerprint_matched = true;
}
if (0 == memcmp(recv_fingerprint, Settings.mqtt_fingerprint[1], 20)) {
fingerprint_matched = true;
}
if (!fingerprint_matched) {
// we had no match, so we need to change all fingerprints ready to learn
if (learn_fingerprint1) {
memcpy(Settings.mqtt_fingerprint[0], recv_fingerprint, 20);
}
if (learn_fingerprint2) {
memcpy(Settings.mqtt_fingerprint[1], recv_fingerprint, 20);
}
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "Fingerprint learned: %s"), buf_fingerprint);
SettingsSaveAll(); // save settings
2019-06-05 10:44:52 +01:00
}
}
#endif // !USE_MQTT_TLS_CA_CERT
#endif // USE_MQTT_TLS
MqttConnected();
} else {
#ifdef USE_MQTT_TLS
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT "TLS connection error: %d"), tlsClient->getLastError());
2019-06-05 10:44:52 +01:00
#endif
MqttDisconnected(MqttClient.state()); // status codes are documented here http://pubsubclient.knolleary.net/api.html#state
}
}
2018-11-14 13:32:09 +00:00
void MqttCheck(void)
{
if (Settings.flag.mqtt_enabled) {
if (!MqttIsConnected()) {
global_state.mqtt_down = 1;
if (!mqtt_retry_counter) {
#ifdef USE_DISCOVERY
#ifdef MQTT_HOST_DISCOVERY
if (!strlen(Settings.mqtt_host) && !mdns_begun) { return; }
#endif // MQTT_HOST_DISCOVERY
#endif // USE_DISCOVERY
MqttReconnect();
} else {
mqtt_retry_counter--;
}
} else {
global_state.mqtt_down = 0;
}
} else {
global_state.mqtt_down = 0;
if (mqtt_initial_connection_state) MqttReconnect();
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
#if defined(USE_MQTT_TLS) && !defined(USE_MQTT_TLS_CA_CERT)
void CmndMqttFingerprint(void)
{
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= 2)) {
char fingerprint[60];
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(fingerprint))) {
strlcpy(fingerprint, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? (1 == XdrvMailbox.index) ? MQTT_FINGERPRINT1 : MQTT_FINGERPRINT2 : XdrvMailbox.data, sizeof(fingerprint));
char *p = fingerprint;
for (uint32_t i = 0; i < 20; i++) {
Settings.mqtt_fingerprint[XdrvMailbox.index -1][i] = strtol(p, &p, 16);
}
restart_flag = 2;
}
fingerprint[0] = '\0';
for (uint32_t i = 0; i < sizeof(Settings.mqtt_fingerprint[XdrvMailbox.index -1]); i++) {
snprintf_P(fingerprint, sizeof(fingerprint), PSTR("%s%s%02X"), fingerprint, (i) ? " " : "", Settings.mqtt_fingerprint[XdrvMailbox.index -1][i]);
}
Response_P(S_JSON_COMMAND_INDEX_SVALUE, XdrvMailbox.command, XdrvMailbox.index, fingerprint);
}
}
#endif
#if !defined(USE_MQTT_TLS) || !defined(USE_MQTT_AWS_IOT) // user and password are disabled with AWS IoT
void CmndMqttUser(void)
{
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_user))) {
strlcpy(Settings.mqtt_user, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? MQTT_USER : XdrvMailbox.data, sizeof(Settings.mqtt_user));
restart_flag = 2;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.mqtt_user);
}
void CmndMqttPassword(void)
{
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_pwd))) {
strlcpy(Settings.mqtt_pwd, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? MQTT_PASS : XdrvMailbox.data, sizeof(Settings.mqtt_pwd));
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.mqtt_pwd);
restart_flag = 2;
} else {
Response_P(S_JSON_COMMAND_ASTERISK, XdrvMailbox.command);
}
}
#endif // USE_MQTT_AWS_IOT
void CmndMqttHost(void)
{
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len <= sizeof(Settings.mqtt_host) + sizeof(Settings.mqtt_user) - 2)) {
setLongMqttHost((SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? MQTT_HOST : XdrvMailbox.data);
restart_flag = 2;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, AWS_endpoint);
#else
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_host))) {
strlcpy(Settings.mqtt_host, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? MQTT_HOST : XdrvMailbox.data, sizeof(Settings.mqtt_host));
restart_flag = 2;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.mqtt_host);
#endif
}
void CmndMqttPort(void)
{
if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload < 65536)) {
Settings.mqtt_port = (1 == XdrvMailbox.payload) ? MQTT_PORT : XdrvMailbox.payload;
restart_flag = 2;
}
Response_P(S_JSON_COMMAND_NVALUE, XdrvMailbox.command, Settings.mqtt_port);
}
void CmndMqttRetry(void)
{
if ((XdrvMailbox.payload >= MQTT_RETRY_SECS) && (XdrvMailbox.payload < 32001)) {
Settings.mqtt_retry = XdrvMailbox.payload;
mqtt_retry_counter = Settings.mqtt_retry;
}
Response_P(S_JSON_COMMAND_NVALUE, XdrvMailbox.command, Settings.mqtt_retry);
}
void CmndStateText(void)
{
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= 4)) {
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.state_text[0]))) {
for (uint32_t i = 0; i <= XdrvMailbox.data_len; i++) {
if (XdrvMailbox.data[i] == ' ') XdrvMailbox.data[i] = '_';
}
strlcpy(Settings.state_text[XdrvMailbox.index -1], XdrvMailbox.data, sizeof(Settings.state_text[0]));
}
Response_P(S_JSON_COMMAND_INDEX_SVALUE, XdrvMailbox.command, XdrvMailbox.index, GetStateText(XdrvMailbox.index -1));
}
}
void CmndMqttClient(void)
{
if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_client))) {
strlcpy(Settings.mqtt_client, (SC_DEFAULT == Shortcut()) ? MQTT_CLIENT_ID : XdrvMailbox.data, sizeof(Settings.mqtt_client));
restart_flag = 2;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.mqtt_client);
}
void CmndFullTopic(void)
{
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_fulltopic))) {
MakeValidMqtt(1, XdrvMailbox.data);
if (!strcmp(XdrvMailbox.data, mqtt_client)) { SetShortcutDefault(); }
char stemp1[TOPSZ];
strlcpy(stemp1, (SC_DEFAULT == Shortcut()) ? MQTT_FULLTOPIC : XdrvMailbox.data, sizeof(stemp1));
if (strcmp(stemp1, Settings.mqtt_fulltopic)) {
Response_P((Settings.flag.mqtt_offline) ? S_OFFLINE : "");
MqttPublishPrefixTopic_P(TELE, PSTR(D_LWT), true); // Offline or remove previous retained topic
strlcpy(Settings.mqtt_fulltopic, stemp1, sizeof(Settings.mqtt_fulltopic));
restart_flag = 2;
}
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.mqtt_fulltopic);
}
void CmndPrefix(void)
{
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= 3)) {
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_prefix[0]))) {
MakeValidMqtt(0, XdrvMailbox.data);
strlcpy(Settings.mqtt_prefix[XdrvMailbox.index -1], (SC_DEFAULT == Shortcut()) ? (1==XdrvMailbox.index)?SUB_PREFIX:(2==XdrvMailbox.index)?PUB_PREFIX:PUB_PREFIX2 : XdrvMailbox.data, sizeof(Settings.mqtt_prefix[0]));
// if (Settings.mqtt_prefix[XdrvMailbox.index -1][strlen(Settings.mqtt_prefix[XdrvMailbox.index -1])] == '/') Settings.mqtt_prefix[XdrvMailbox.index -1][strlen(Settings.mqtt_prefix[XdrvMailbox.index -1])] = 0;
restart_flag = 2;
}
Response_P(S_JSON_COMMAND_INDEX_SVALUE, XdrvMailbox.command, XdrvMailbox.index, Settings.mqtt_prefix[XdrvMailbox.index -1]);
}
}
void CmndPublish(void)
{
if (XdrvMailbox.data_len > 0) {
char *mqtt_part = strtok(XdrvMailbox.data, " ");
if (mqtt_part) {
char stemp1[TOPSZ];
strlcpy(stemp1, mqtt_part, sizeof(stemp1));
mqtt_part = strtok(nullptr, " ");
if (mqtt_part) {
strlcpy(mqtt_data, mqtt_part, sizeof(mqtt_data));
} else {
mqtt_data[0] = '\0';
}
MqttPublishDirect(stemp1, (XdrvMailbox.index == 2));
// Response_P(S_JSON_COMMAND_SVALUE, command, D_JSON_DONE);
mqtt_data[0] = '\0';
}
}
}
void CmndGroupTopic(void)
{
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_grptopic))) {
MakeValidMqtt(0, XdrvMailbox.data);
if (!strcmp(XdrvMailbox.data, mqtt_client)) { SetShortcutDefault(); }
strlcpy(Settings.mqtt_grptopic, (SC_DEFAULT == Shortcut()) ? MQTT_GRPTOPIC : XdrvMailbox.data, sizeof(Settings.mqtt_grptopic));
restart_flag = 2;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.mqtt_grptopic);
}
void CmndTopic(void)
{
if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.mqtt_topic))) {
MakeValidMqtt(0, XdrvMailbox.data);
if (!strcmp(XdrvMailbox.data, mqtt_client)) { SetShortcutDefault(); }
char stemp1[TOPSZ];
strlcpy(stemp1, (SC_DEFAULT == Shortcut()) ? MQTT_TOPIC : XdrvMailbox.data, sizeof(stemp1));
if (strcmp(stemp1, Settings.mqtt_topic)) {
Response_P((Settings.flag.mqtt_offline) ? S_OFFLINE : "");
MqttPublishPrefixTopic_P(TELE, PSTR(D_LWT), true); // Offline or remove previous retained topic
strlcpy(Settings.mqtt_topic, stemp1, sizeof(Settings.mqtt_topic));
restart_flag = 2;
}
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.mqtt_topic);
}
void CmndButtonTopic(void)
{
if (!XdrvMailbox.grpflg && (XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.button_topic))) {
MakeValidMqtt(0, XdrvMailbox.data);
if (!strcmp(XdrvMailbox.data, mqtt_client)) { SetShortcutDefault(); }
switch (Shortcut()) {
case SC_CLEAR: strlcpy(Settings.button_topic, "", sizeof(Settings.button_topic)); break;
case SC_DEFAULT: strlcpy(Settings.button_topic, mqtt_topic, sizeof(Settings.button_topic)); break;
case SC_USER: strlcpy(Settings.button_topic, MQTT_BUTTON_TOPIC, sizeof(Settings.button_topic)); break;
default: strlcpy(Settings.button_topic, XdrvMailbox.data, sizeof(Settings.button_topic));
}
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.button_topic);
}
void CmndSwitchTopic(void)
{
if ((XdrvMailbox.data_len > 0) && (XdrvMailbox.data_len < sizeof(Settings.switch_topic))) {
MakeValidMqtt(0, XdrvMailbox.data);
if (!strcmp(XdrvMailbox.data, mqtt_client)) { SetShortcutDefault(); }
switch (Shortcut()) {
case SC_CLEAR: strlcpy(Settings.switch_topic, "", sizeof(Settings.switch_topic)); break;
case SC_DEFAULT: strlcpy(Settings.switch_topic, mqtt_topic, sizeof(Settings.switch_topic)); break;
case SC_USER: strlcpy(Settings.switch_topic, MQTT_SWITCH_TOPIC, sizeof(Settings.switch_topic)); break;
default: strlcpy(Settings.switch_topic, XdrvMailbox.data, sizeof(Settings.switch_topic));
}
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, Settings.switch_topic);
}
void CmndButtonRetain(void)
{
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
if (!XdrvMailbox.payload) {
for (uint32_t i = 1; i <= MAX_KEYS; i++) {
SendKey(0, i, 9); // Clear MQTT retain in broker
}
}
Settings.flag.mqtt_button_retain = XdrvMailbox.payload;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, GetStateText(Settings.flag.mqtt_button_retain));
}
void CmndSwitchRetain(void)
{
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
if (!XdrvMailbox.payload) {
for (uint32_t i = 1; i <= MAX_SWITCHES; i++) {
SendKey(1, i, 9); // Clear MQTT retain in broker
}
}
Settings.flag.mqtt_switch_retain = XdrvMailbox.payload;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, GetStateText(Settings.flag.mqtt_switch_retain));
}
void CmndPowerRetain(void)
{
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
if (!XdrvMailbox.payload) {
char stemp1[TOPSZ];
char scommand[CMDSZ];
for (uint32_t i = 1; i <= devices_present; i++) { // Clear MQTT retain in broker
GetTopic_P(stemp1, STAT, mqtt_topic, GetPowerDevice(scommand, i, sizeof(scommand), Settings.flag.device_index_enable));
mqtt_data[0] = '\0';
MqttPublish(stemp1, Settings.flag.mqtt_power_retain);
}
}
Settings.flag.mqtt_power_retain = XdrvMailbox.payload;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, GetStateText(Settings.flag.mqtt_power_retain));
}
void CmndSensorRetain(void)
{
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 1)) {
if (!XdrvMailbox.payload) {
mqtt_data[0] = '\0';
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain);
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_ENERGY), Settings.flag.mqtt_sensor_retain);
}
Settings.flag.mqtt_sensor_retain = XdrvMailbox.payload;
}
Response_P(S_JSON_COMMAND_SVALUE, XdrvMailbox.command, GetStateText(Settings.flag.mqtt_sensor_retain));
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
#ifdef USE_WEBSERVER
#define WEB_HANDLE_MQTT "mq"
const char S_CONFIGURE_MQTT[] PROGMEM = D_CONFIGURE_MQTT;
const char HTTP_BTN_MENU_MQTT[] PROGMEM =
2019-02-13 15:05:25 +00:00
"<p><form action='" WEB_HANDLE_MQTT "' method='get'><button>" D_CONFIGURE_MQTT "</button></form></p>";
const char HTTP_FORM_MQTT1[] PROGMEM =
2019-02-13 15:05:25 +00:00
"<fieldset><legend><b>&nbsp;" D_MQTT_PARAMETERS "&nbsp;</b></legend>"
"<form method='get' action='" WEB_HANDLE_MQTT "'>"
"<p><b>" D_HOST "</b> (" MQTT_HOST ")<br><input id='mh' placeholder='" MQTT_HOST" ' value='%s'></p>"
"<p><b>" D_PORT "</b> (" STR(MQTT_PORT) ")<br><input id='ml' placeholder='" STR(MQTT_PORT) "' value='%d'></p>"
"<p><b>" D_CLIENT "</b> (%s)<br><input id='mc' placeholder='%s' value='%s'></p>";
const char HTTP_FORM_MQTT2[] PROGMEM =
#if !defined(USE_MQTT_TLS) || !defined(USE_MQTT_AWS_IOT) // user and password disabled with AWS IoT
"<p><b>" D_USER "</b> (" MQTT_USER ")<br><input id='mu' placeholder='" MQTT_USER "' value='%s'></p>"
"<p><b>" D_PASSWORD "</b><input type='checkbox' onclick='sp(\"mp\")'><br><input id='mp' type='password' placeholder='" D_PASSWORD "' value='" D_ASTERISK_PWD "'></p>"
#endif // USE_MQTT_AWS_IOT
"<p><b>" D_TOPIC "</b> = %%topic%% (%s)<br><input id='mt' placeholder='%s' value='%s'></p>"
"<p><b>" D_FULL_TOPIC "</b> (%s)<br><input id='mf' placeholder='%s' value='%s'></p>";
2018-11-14 13:32:09 +00:00
void HandleMqttConfiguration(void)
{
if (!HttpCheckPriviledgedAccess()) { return; }
AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_MQTT);
if (WebServer->hasArg("save")) {
MqttSaveSettings();
WebRestart(1);
return;
}
char str[sizeof(Settings.mqtt_client)];
WSContentStart_P(S_CONFIGURE_MQTT);
WSContentSendStyle();
WSContentSend_P(HTTP_FORM_MQTT1,
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
AWS_endpoint,
#else
Settings.mqtt_host,
#endif
Settings.mqtt_port,
Format(str, MQTT_CLIENT_ID, sizeof(str)), MQTT_CLIENT_ID, Settings.mqtt_client);
WSContentSend_P(HTTP_FORM_MQTT2,
(Settings.mqtt_user[0] == '\0') ? "0" : Settings.mqtt_user,
Format(str, MQTT_TOPIC, sizeof(str)), MQTT_TOPIC, Settings.mqtt_topic,
MQTT_FULLTOPIC, MQTT_FULLTOPIC, Settings.mqtt_fulltopic);
WSContentSend_P(HTTP_FORM_END);
2019-03-11 09:38:41 +00:00
WSContentSpaceButton(BUTTON_CONFIGURATION);
2019-03-16 15:23:41 +00:00
WSContentStop();
}
2018-11-14 13:32:09 +00:00
void MqttSaveSettings(void)
{
char tmp[100];
char stemp[TOPSZ];
char stemp2[TOPSZ];
WebGetArg("mt", tmp, sizeof(tmp));
strlcpy(stemp, (!strlen(tmp)) ? MQTT_TOPIC : tmp, sizeof(stemp));
MakeValidMqtt(0, stemp);
WebGetArg("mf", tmp, sizeof(tmp));
strlcpy(stemp2, (!strlen(tmp)) ? MQTT_FULLTOPIC : tmp, sizeof(stemp2));
MakeValidMqtt(1, stemp2);
if ((strcmp(stemp, Settings.mqtt_topic)) || (strcmp(stemp2, Settings.mqtt_fulltopic))) {
Response_P((Settings.flag.mqtt_offline) ? S_OFFLINE : "");
MqttPublishPrefixTopic_P(TELE, S_LWT, true); // Offline or remove previous retained topic
}
strlcpy(Settings.mqtt_topic, stemp, sizeof(Settings.mqtt_topic));
strlcpy(Settings.mqtt_fulltopic, stemp2, sizeof(Settings.mqtt_fulltopic));
WebGetArg("mh", tmp, sizeof(tmp));
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
setLongMqttHost((!strlen(tmp)) ? MQTT_HOST : (!strcmp(tmp,"0")) ? "" : tmp);
#else
strlcpy(Settings.mqtt_host, (!strlen(tmp)) ? MQTT_HOST : (!strcmp(tmp,"0")) ? "" : tmp, sizeof(Settings.mqtt_host));
#endif
WebGetArg("ml", tmp, sizeof(tmp));
Settings.mqtt_port = (!strlen(tmp)) ? MQTT_PORT : atoi(tmp);
WebGetArg("mc", tmp, sizeof(tmp));
strlcpy(Settings.mqtt_client, (!strlen(tmp)) ? MQTT_CLIENT_ID : tmp, sizeof(Settings.mqtt_client));
#if defined(USE_MQTT_TLS) && defined(USE_MQTT_AWS_IOT)
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT D_CMND_MQTTHOST " %s, " D_CMND_MQTTPORT " %d, " D_CMND_MQTTCLIENT " %s, " D_CMND_TOPIC " %s, " D_CMND_FULLTOPIC " %s"),
AWS_endpoint, Settings.mqtt_port, Settings.mqtt_client, Settings.mqtt_topic, Settings.mqtt_fulltopic);
#else // USE_MQTT_AWS_IOT
WebGetArg("mu", tmp, sizeof(tmp));
strlcpy(Settings.mqtt_user, (!strlen(tmp)) ? MQTT_USER : (!strcmp(tmp,"0")) ? "" : tmp, sizeof(Settings.mqtt_user));
WebGetArg("mp", tmp, sizeof(tmp));
strlcpy(Settings.mqtt_pwd, (!strlen(tmp)) ? "" : (!strcmp(tmp, D_ASTERISK_PWD)) ? Settings.mqtt_pwd : tmp, sizeof(Settings.mqtt_pwd));
AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MQTT D_CMND_MQTTHOST " %s, " D_CMND_MQTTPORT " %d, " D_CMND_MQTTCLIENT " %s, " D_CMND_MQTTUSER " %s, " D_CMND_TOPIC " %s, " D_CMND_FULLTOPIC " %s"),
Settings.mqtt_host, Settings.mqtt_port, Settings.mqtt_client, Settings.mqtt_user, Settings.mqtt_topic, Settings.mqtt_fulltopic);
#endif
}
#endif // USE_WEBSERVER
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv02(uint8_t function)
{
bool result = false;
if (Settings.flag.mqtt_enabled) {
switch (function) {
2019-06-05 10:44:52 +01:00
case FUNC_PRE_INIT:
MqttInit();
break;
case FUNC_EVERY_50_MSECOND: // https://github.com/knolleary/pubsubclient/issues/556
MqttClient.loop();
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_ADD_BUTTON:
WSContentSend_P(HTTP_BTN_MENU_MQTT);
break;
case FUNC_WEB_ADD_HANDLER:
WebServer->on("/" WEB_HANDLE_MQTT, HandleMqttConfiguration);
break;
#endif // USE_WEBSERVER
case FUNC_COMMAND:
result = DecodeCommand(kMqttCommands, MqttCommand);
break;
}
}
return result;
}