Tasmota/platformio_override_sample.ini

; ***  Example PlatformIO Project Configuration Override File   ***
; ***  Changes done here override settings in platformio.ini    ***
;
; *****************************************************************
; ***  to activate rename this file to platformio_override.ini  ***
; *****************************************************************
;
; Please visit documentation for the options and examples
; http://docs.platformio.org/en/stable/projectconf.html

[platformio]
; For best Gitpod performance remove the ";" in the next line. Needed Platformio files are cached and installed at first run
;core_dir = .platformio
; Custom config Zigbee [env] -> platformio_tasmota_cenv_example.ini
extra_configs = platformio_tasmota_cenv.ini

; *** Build/upload environment
default_envs =
; *** Uncomment the line(s) below to select version(s)
                tasmota
;                tasmota-debug
;                tasmota-ircustom
;                tasmota-minimal
;                tasmota-lite
;                tasmota-knx
;                tasmota-sensors
;                tasmota-display
;                tasmota-zbbridge
;                tasmota-ir
;                tasmota32
;                tasmota32-bluetooth
;                tasmota32-webcam
;                tasmota32-knx
;                tasmota32-sensors
;                tasmota32-display
;                tasmota32-ir
;                tasmota32-ircustom
;                tasmota32solo1
;                tasmota32c3
;                tasmota32s2
;                tasmota32-odroidgo
;                tasmota32-core2


[common]
platform_packages           = ${core.platform_packages}
build_unflags               = ${core.build_unflags}
build_flags                 = ${core.build_flags}
; *** Optional Debug messages
;                            -DDEBUG_TASMOTA_CORE
;                            -DDEBUG_TASMOTA_DRIVER
;                            -DDEBUG_TASMOTA_SENSOR

; *** CAUTION *** This setting is ONLY possible since 12.01.2021 with development version !!!
; *** Enable only if you exactly know what are you doing
; *** If you try with earlier builds a serial erase and flash is probably needed
;
; Build variant 1MB = 1MB firmware no filesystem (default)
;board                       = esp8266_1M
; Build variant 2MB = 1MB firmware, 1MB filesystem (most Shelly devices)
;board                       = esp8266_2M1M
; Build variant 4MB = 1MB firmware, 1MB OTA, 2MB filesystem (WEMOS D1 Mini, NodeMCU, Sonoff POW)
;board                       = esp8266_4M2M

; set CPU frequency to 80MHz (default) or 160MHz
;board_build.f_cpu           = 160000000L

; set Flash chip frequency to 40MHz (default), 20MHz, 26Mhz, 80Mhz
;board_build.f_flash         = 20000000L
;board_build.f_flash         = 26000000L
;board_build.f_flash         = 80000000L

; *** Upload Serial reset method for Wemos and NodeMCU
upload_port                 = COM5

extra_scripts               = ${scripts_defaults.extra_scripts}
;                              pio-tools/obj-dump.py

lib_extra_dirs              = ${library.lib_extra_dirs}

[core]
; Activate only (one set) if you want to override the standard core defined in platformio.ini !!!

;platform_packages           = ${tasmota_stage.platform_packages}
;build_unflags               = ${tasmota_stage.build_unflags}
;build_flags                 = ${tasmota_stage.build_flags}

;platform_packages           = ${core_stage.platform_packages}
;build_unflags               = ${core_stage.build_unflags}
;build_flags                 = ${core_stage.build_flags}


[tasmota_stage]
; *** Esp8266 core for Arduino version Tasmota stage. Backport for PWM selection
platform_packages           = tasmota/framework-arduinoespressif8266 @ ~2.7.4
build_unflags               = ${esp_defaults.build_unflags}
build_flags                 = ${esp82xx_defaults.build_flags}
; *** Use ONE of the two PWM variants. Tasmota default is Locked PWM
                              ;-DWAVEFORM_LOCKED_PHASE
                              -DWAVEFORM_LOCKED_PWM

[core_stage]
; *** Esp8266 core for Arduino version stage
platform_packages           = framework-arduinoespressif8266 @ https://github.com/esp8266/Arduino.git
; *** Use Xtensa build chain 10.2. GNU23 from https://github.com/earlephilhower/esp-quick-toolchain
                              tasmota/toolchain-xtensa @ 5.100200.210303
build_unflags               = ${esp_defaults.build_unflags}
                              -Wswitch-unreachable
build_flags                 = ${esp82xx_defaults.build_flags}
; *** Use ONE of the two PWM variants. Tasmota default is Locked PWM
                              ;-DWAVEFORM_LOCKED_PHASE
                              -DWAVEFORM_LOCKED_PWM
                              -Wno-switch-unreachable

[common32]
platform_packages           = ${core32.platform_packages}
build_unflags               = ${core32.build_unflags}
build_flags                 = ${core32.build_flags}
upload_port                 = COM4
lib_extra_dirs              = ${library.lib_extra_dirs}
; *** ESP32 lib. ALWAYS needed for ESP32 !!!
                              lib/libesp32
; *** comment the following line if you dont use LVGL in a Tasmota32 build. Reduces compile time
                              lib/libesp32_lvgl
; *** comment the following line if you dont use Bluetooth or Apple Homekit in a Tasmota32 build. Reduces compile time
                              lib/libesp32_div
; *** uncomment the following line if you dont use Epaper driver epidy in your Tasmota32 build. Reduces compile time 
                              lib/libesp32_epdiy

[core32]
; Activate Stage Core32 by removing ";" in next 3 lines, if you want to override the standard core32
;platform_packages           = ${core32_stage.platform_packages}
;build_unflags               = ${core32_stage.build_unflags}
;build_flags                 = ${core32_stage.build_flags}

[core32_stage]
platform_packages           = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git
                              platformio/tool-mklittlefs @ ~1.203.200522
build_unflags               = ${esp32_defaults.build_unflags}
build_flags                 = ${esp32_defaults.build_flags}
                              -DESP32_STAGE=true

[library]
shared_libdeps_dir          = lib
; *** Library disable / enable for variant Tasmota(32). Disable reduces compile time
; *** !!! Disabling needed libs will generate compile errors !!!
; *** The resulting firmware will NOT be different if you leave all libs enabled
; *** Disabling by putting a ";" in front of the lib name
; *** If you dont know what it is all about, do not change
lib_extra_dirs              =
; *** Only disabled for Tasmota minimal and Tasmota light. For all other variants needed!
                              lib/lib_basic
; **** I2C devices. Most sensors. Disable only if you dont have ANY I2C device enabled
                              lib/lib_i2c
; *** Displays. Disable if you dont have any Display activated
                              lib/lib_display
; *** Bear SSL and base64. Disable if you dont have SSL or TLS activated
                              lib/lib_ssl
; *** Audio needs a lot of time to compile. Mostly not used functions. Recommended to disable
                              lib/lib_audio
; *** RF 433 stuff (not RF Bridge). Recommended to disable
                              lib/lib_rf
; *** Mostly not used functions. Recommended to disable
                              lib/lib_div