Tasmota/tasmota/xsns_58_GPS.ino

859 lines
30 KiB
Arduino
Raw Normal View History

2019-12-17 02:01:07 +00:00
/*
xsns_92_GPS_UBX.ino - GPS UBLOX support for Sonoff-Tasmota
Copyright (C) 2019 Theo Arends, Christian Baars and Adrian Scillato
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
--------------------------------------------------------------------------------------------
Version Date Action Description
--------------------------------------------------------------------------------------------
0.9.1.0 20191216 integrate - Added pin specifications from Tasmota WEB UI
---
0.9.0.0 20190817 started - further development by Christian Baars - https://github.com/Staars/Sonoff-Tasmota
forked - from arendst/tasmota - https://github.com/arendst/Sonoff-Tasmota
base - code base from arendst and - https://www.youtube.com/watch?v=TwhCX0c8Xe0
## GPS-driver for the Ublox-series 6-8
Driver is tested on a NEO-6m and a Beitian-220. Series 7 should work too. This adds only about 6kb to the program size, because the efficient UBX-protocol is used. These modules are quite cheap, starting at about 3.50 for the NEO-6m.
## Features:
- get position and time data
- sets system time automatically and Settings.latitude and Settings.longitude via command
- can log postion data with timestamp to flash with a small memory footprint of only 12 Bytes per record
- constructs a GPX-file for download of this data
- Web-UI
- simplified NTP-server
- command interface
## Usage:
The serial pins are GPX_RX and GPS_TX, no further installation steps needed. To get more debug information compile it with option "DEBUG_TASMOTA_SENSOR".
## Commands:
+ sensor92 0
write to all available sectors, then restart and overwrite the older ones
+ sensor92 1
write to all available sectors, then restart and overwrite the older ones
+ sensor92 2
filter out horizontal drift noise
+ sensor92 3
turn off noise filter
+ sensor92 4
start recording, new data will be appended
+ sensor92 5
start new recording, old data will lost
+ sensor92 6
stop recording, download link will be visible in Web-UI
+ sensor92 7
send mqtt on new postion + TELE -> consider to set TELE to a very high value
+ sensor92 8
only TELE message
+ sensor92 9
start NTP-server
+ sensor92 10
deactivate NTP-server
+ sensor92 11
force update of Tasmota-system-UTC with every new GPS-time-message
+ sensor92 12
do not update of Tasmota-system-UTC with every new GPS-time-message
+ sensor92 13
set latitude and longitude in settings
## Rules examples for SSD1306 32x128
rule1 on tele-GPS#lat do DisplayText [s1p21c1l01f1]LAT: %value% endon on tele-GPS#lon do DisplayText [s1p21c1l2]LON: %value% endon on switch1#state==3 do sensor92 4 endon on switch1#state==2 do sensor92 6 endon
rule2 on tele-GPS#int>9 do DisplayText [f0c9l4]I%value% endon on tele-GPS#int<10 do DisplayText [f0c9l4]I0%value% endon on tele-GPS#fil==1 do DisplayText [f0c18l4]F endon on tele-GPS#fil==0 do DisplayText [f0c18l4]N endon
rule3 on tele-FLOG#sec do DisplayText [f0c1l4]SAV:%value% endon on tele-FLOG#rec==1 do DisplayText [f0c1l4]REC: endon on tele-FLOG#mode do DisplayText [f0c14l4]M%value% endon
*/
#ifdef USE_GPS
#include "NTPServer.h"
#include "NTPPacket.h"
/*********************************************************************************************\
* constants
\*********************************************************************************************/
#define D_CMND_UBX "UBX"
const char S_JSON_UBX_COMMAND_NVALUE[] PROGMEM = "{\"" D_CMND_UBX "%s\":%d}";
const char kUBXTypes[] PROGMEM = "UBX";
#define UBX_LAT_LON_THRESHOLD 1000 // filter out some noise of local drift
/********************************************************************************************\
| *globals
\*********************************************************************************************/
const char UBLOX_INIT[] PROGMEM = {
// Disable NMEA
0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x24, // GxGGA off
0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x2B, // GxGLL off
0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x02,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x32, // GxGSA off
0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x39, // GxGSV off
0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x04,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x40, // GxRMC off
0xB5,0x62,0x06,0x01,0x08,0x00,0xF0,0x05,0x00,0x00,0x00,0x00,0x00,0x01,0x05,0x47, // GxVTG off
// Disable UBX
0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x17,0xDC, //NAV-PVT off
0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x12,0xB9, //NAV-POSLLH off
0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x13,0xC0, //NAV-STATUS off
0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x21,0x00,0x00,0x00,0x00,0x00,0x00,0x31,0x92, //NAV-TIMEUTC off
// Enable UBX
// 0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x07,0x00,0x01,0x00,0x00,0x00,0x00,0x18,0xE1, //NAV-PVT on
0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x02,0x00,0x01,0x00,0x00,0x00,0x00,0x13,0xBE, //NAV-POSLLH on
0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x03,0x00,0x01,0x00,0x00,0x00,0x00,0x14,0xC5, //NAV-STATUS on
0xB5,0x62,0x06,0x01,0x08,0x00,0x01,0x21,0x00,0x01,0x00,0x00,0x00,0x00,0x32,0x97, //NAV-TIMEUTC on
// Rate - we will not reset it for the moment after restart
// 0xB5,0x62,0x06,0x08,0x06,0x00,0x64,0x00,0x01,0x00,0x01,0x00,0x7A,0x12, //(10Hz)
// 0xB5,0x62,0x06,0x08,0x06,0x00,0xC8,0x00,0x01,0x00,0x01,0x00,0xDE,0x6A, //(5Hz)
// 0xB5,0x62,0x06,0x08,0x06,0x00,0xE8,0x03,0x01,0x00,0x01,0x00,0x01,0x39 //(1Hz)
// 0xB5,0x62,0x06,0x08,0x06,0x00,0xD0,0x07,0x01,0x00,0x01,0x00,0xED,0xBD //(0.5Hz)
};
char UBX_name[4];
struct UBX_t{
const char UBX_HEADER[2] = { 0xB5, 0x62 }; // TODO: Check if we really save space here inside the struct
const char NAV_POSLLH_HEADER[2] = { 0x01, 0x02 };
const char NAV_STATUS_HEADER[2] = { 0x01, 0x03 };
const char NAV_TIME_HEADER[2] = { 0x01, 0x21 };
struct entry_t{
int32_t lat; //raw sensor value
int32_t lon; //raw sensor value
uint32_t time; //local time from system (maybe provided by the sensor)
};
union {
entry_t values;
uint8_t bytes[sizeof(entry_t)];
} rec_buffer;
struct POLL_MSG {
uint8_t cls;
uint8_t id;
uint16_t zero;
};
struct NAV_POSLLH {
uint8_t cls;
uint8_t id;
uint16_t len;
uint32_t iTOW;
int32_t lon;
int32_t lat;
int32_t height;
int32_t hMSL;
uint32_t hAcc;
uint32_t vAcc;
};
struct NAV_STATUS {
uint8_t cls;
uint8_t id;
uint16_t len;
uint32_t iTOW;
uint8_t gpsFix;
uint8_t flags; //bit 0 - gpsfix valid
uint8_t fixStat;
uint8_t flags2;
uint32_t ttff;
uint32_t msss;
};
struct NAV_TIME_UTC {
uint8_t cls;
uint8_t id;
uint16_t len;
uint32_t iTOW;
uint32_t tAcc;
int32_t nano; // Nanoseconds of second, range -1e9 .. 1e9 (UTC)
uint16_t year;
uint8_t month;
uint8_t day;
uint8_t hour;
uint8_t min;
uint8_t sec;
struct {
uint8_t UTC:1;
uint8_t WKN:1; // week number
uint8_t TOW:1; // time of week
uint8_t padding:5;
} valid;
};
struct CFG_RATE {
uint8_t cls; //0x06
uint8_t id; //0x08
uint16_t len; // 6 bytes
uint16_t measRate; // in every ms -> 1 Hz = 1000 ms; 10 Hz = 100 ms -> x = 1000 ms / Hz
uint16_t navRate; // x measurements for 1 navigation event
uint16_t timeRef; // align to time system: 0= UTC, 1 = GPS, 2 = GLONASS, ...
char CK[2]; // checksum
};
struct {
uint32_t last_iTOW;
int32_t last_lat;
int32_t last_lon;
int32_t last_height;
uint32_t last_hAcc;
uint32_t last_vAcc;
uint8_t gpsFix;
uint8_t non_empty_loops; // in case of an unintended reset of the GPS, the serial interface will get flooded with NMEA
uint16_t log_interval; // in tenth of seconds
} state;
struct {
uint32_t filter_noise:1;
uint32_t send_when_new:1; // no teleinterval
uint32_t send_UI_only:1;
uint32_t runningNTP:1;
uint32_t forceUTCupdate:1;
// TODO: more to come
} mode;
union {
NAV_POSLLH navPosllh;
NAV_STATUS navStatus;
NAV_TIME_UTC navTime;
POLL_MSG pollMsg;
CFG_RATE cfgRate;
} Message;
} UBX;
enum UBXMsgType {
MT_NONE,
MT_NAV_POSLLH,
MT_NAV_STATUS,
MT_NAV_TIME,
MT_POLL
};
#ifdef USE_FLOG
FLOG *Flog = nullptr;
#endif //USE_FLOG
TasmotaSerial *UBXSerial;
NtpServer timeServer(PortUdp);
/*********************************************************************************************\
* helper function
\*********************************************************************************************/
void UBXcalcChecksum(char* CK, size_t msgSize) {
memset(CK, 0, 2);
for (int i = 0; i < msgSize; i++) {
CK[0] += ((char*)(&UBX.Message))[i];
CK[1] += CK[0];
}
}
boolean UBXcompareMsgHeader(const char* msgHeader) {
char* ptr = (char*)(&UBX.Message);
return ptr[0] == msgHeader[0] && ptr[1] == msgHeader[1];
}
void UBXinitCFG(void){
for(uint32_t i = 0; i < sizeof(UBLOX_INIT); i++) {
UBXSerial->write( pgm_read_byte(UBLOX_INIT+i) );
}
DEBUG_SENSOR_LOG(PSTR("UBX: turn off NMEA"));
/*
AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_KNX D_ADD " GA #%d: %s " D_TO " %d/%d/%d"),
Settings.knx_GA_registered,
device_param_ga[GAop-1],
GA_FNUM, GA_AREA, GA_FDEF );
*/
}
void UBXTriggerTele(void){
mqtt_data[0] = '\0';
if (MqttShowSensor()) {
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain);
#ifdef USE_RULES
RulesTeleperiod(); // Allow rule based HA messages
#endif // USE_RULES
}
}
/********************************************************************************************/
void UBXDetect(void)
{
if ((pin[GPIO_GPS_RX] < 99) && (pin[GPIO_GPS_TX] < 99)) {
UBXSerial = new TasmotaSerial(pin[GPIO_GPS_RX], pin[GPIO_GPS_TX], 1, 0, 96); // 64 byte buffer is NOT enough
if (UBXSerial->begin(9600)) {
DEBUG_SENSOR_LOG(PSTR("UBX: started serial"));
if (UBXSerial->hardwareSerial()) {
ClaimSerial();
DEBUG_SENSOR_LOG(PSTR("UBX: claim HW"));
}
}
}
UBXinitCFG(); // turn of NMEA, only use "our" UBX-messages
#ifdef USE_FLOG
if(!Flog){
Flog = new FLOG; // init Flash Log
Flog->init();
}
#endif // USE_FLOG
UBX.state.log_interval = 10; // 1 second
UBX.mode.send_UI_only = true; // send UI data ...
UBXTriggerTele(); // ... once at after start
}
uint32_t UBXprocessGPS() {
static uint32_t fpos = 0;
static char checksum[2];
static uint8_t currentMsgType = MT_NONE;
static size_t payloadSize = sizeof(UBX.Message);
// DEBUG_SENSOR_LOG(PSTR("UBX: check for serial data"));
uint32_t data_bytes = 0;
while ( UBXSerial->available() ) {
data_bytes++;
byte c = UBXSerial->read();
if ( fpos < 2 ) {
// For the first two bytes we are simply looking for a match with the UBX header bytes (0xB5,0x62)
if ( c == UBX.UBX_HEADER[fpos] )
fpos++;
else
fpos = 0; // Reset to beginning state.
}
else {
// If we come here then fpos >= 2, which means we have found a match with the UBX_HEADER
// and we are now reading in the bytes that make up the payload.
// Place the incoming byte into the ubxMessage struct. The position is fpos-2 because
// the struct does not include the initial two-byte header (UBX_HEADER).
if ( (fpos-2) < payloadSize )
((char*)(&UBX.Message))[fpos-2] = c;
fpos++;
if ( fpos == 4 ) {
// We have just received the second byte of the message type header,
// so now we can check to see what kind of message it is.
if ( UBXcompareMsgHeader(UBX.NAV_POSLLH_HEADER) ) {
currentMsgType = MT_NAV_POSLLH;
payloadSize = sizeof(UBX_t::NAV_POSLLH);
DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_POSLLH"));
}
else if ( UBXcompareMsgHeader(UBX.NAV_STATUS_HEADER) ) {
currentMsgType = MT_NAV_STATUS;
payloadSize = sizeof(UBX_t::NAV_STATUS);
DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_STATUS"));
}
else if ( UBXcompareMsgHeader(UBX.NAV_TIME_HEADER) ) {
currentMsgType = MT_NAV_TIME;
payloadSize = sizeof(UBX_t::NAV_TIME_UTC);
DEBUG_SENSOR_LOG(PSTR("UBX: got NAV_TIME_UTC"));
}
else {
// unknown message type, bail
fpos = 0;
continue;
}
}
if ( fpos == (payloadSize+2) ) {
// All payload bytes have now been received, so we can calculate the
// expected checksum value to compare with the next two incoming bytes.
UBXcalcChecksum(checksum, payloadSize);
}
else if ( fpos == (payloadSize+3) ) {
// First byte after the payload, ie. first byte of the checksum.
// Does it match the first byte of the checksum we calculated?
if ( c != checksum[0] ) {
// Checksum doesn't match, reset to beginning state and try again.
fpos = 0;
}
}
else if ( fpos == (payloadSize+4) ) {
// Second byte after the payload, ie. second byte of the checksum.
// Does it match the second byte of the checksum we calculated?
fpos = 0; // We will reset the state regardless of whether the checksum matches.
if ( c == checksum[1] ) {
// Checksum matches, we have a valid message.
return currentMsgType;
}
}
else if ( fpos > (payloadSize+4) ) {
// We have now read more bytes than both the expected payload and checksum
// together, so something went wrong. Reset to beginning state and try again.
fpos = 0;
}
}
}
// DEBUG_SENSOR_LOG(PSTR("UBX: got none or unknown Message"));
if(data_bytes!=0){
UBX.state.non_empty_loops++;
DEBUG_SENSOR_LOG(PSTR("UBX: got %u bytes, non-empty-loop: %u"), data_bytes, UBX.state.non_empty_loops);
}
else{
UBX.state.non_empty_loops = 0; // now a hidden GPS-device reset is unlikely
}
return MT_NONE;
}
/********************************************************************************************\
| * callback functions for the download
\*********************************************************************************************/
#ifdef USE_FLOG
void UBXsendHeader(void){
WebServer->setContentLength(CONTENT_LENGTH_UNKNOWN);
WebServer->sendHeader(F("Content-Disposition"), F("attachment; filename=TASMOTA.gpx"));
WSSend(200, CT_STREAM, F(
"<?xml version=\"1.0\" encoding=\"UTF-8\" standalone=\"no\" ?>\r\n"
"<GPX version=\"1.1\" creator=\"TASMOTA\" xmlns=\"http://www.topografix.com/GPX/1/1\" \r\n"
"xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\"\r\n"
"xsi:schemaLocation=\"http://www.topografix.com/GPX/1/1 http://www.topografix.com/GPX/1/1/gpx.xsd\">\r\n"
"<trk>\r\n<trkseg>\r\n"));
}
void UBXsendRecord(uint8_t *buf){
char record[100];
char stime[32];
UBX_t::entry_t *entry = (UBX_t::entry_t*)buf;
snprintf_P(stime, sizeof(stime), GetDT(entry->time).c_str());
char lat[12];
char lon[12];
dtostrfd((double)entry->lat/10000000.0f,7,lat);
dtostrfd((double)entry->lon/10000000.0f,7,lon);
snprintf_P(record, sizeof(record),PSTR("<trkpt\n\t lat=\"%s\" lon=\"%s\">\n\t<time>%s</time>\n</trkpt>\n"),lat ,lon, stime);
// DEBUG_SENSOR_LOG(PSTR("FLOG: DL %u %u"), Flog->sector.dword_buffer[k+j],Flog->sector.dword_buffer[k+j+1]);
WebServer->sendContent_P(record);
}
void UBXsendFooter(void){
WebServer->sendContent(F("</trkseg>\n</trk>\n</gpx>"));
WebServer->sendContent("");
Rtc.user_time_entry = false; // we have blocked the main loop and want a new valid time
}
/********************************************************************************************/
void UBXsendFile(void){
if (!HttpCheckPriviledgedAccess()) { return; }
Flog->startDownload(sizeof(UBX.rec_buffer),UBXsendHeader,UBXsendRecord,UBXsendFooter);
}
#endif //USE_FLOG
/********************************************************************************************/
void UBXSetRate(uint16_t interval){
UBX.Message.cfgRate.cls = 0x06;
UBX.Message.cfgRate.id = 0x08;
UBX.Message.cfgRate.len = 6;
uint32_t measRate = (1000*(uint32_t)interval); //seconds to milliseconds
if (measRate > 0xffff) {
measRate = 0xffff; // max. 65535 ms interval
}
UBX.Message.cfgRate.measRate = (uint16_t)measRate;
UBX.Message.cfgRate.navRate = 1;
UBX.Message.cfgRate.timeRef = 1;
UBXcalcChecksum(UBX.Message.cfgRate.CK, sizeof(UBX.Message.cfgRate)-sizeof(UBX.Message.cfgRate.CK));
DEBUG_SENSOR_LOG(PSTR("UBX: requested interval: %u seconds measRate: %u ms"), interval, UBX.Message.cfgRate.measRate);
UBXSerial->write(UBX.UBX_HEADER[0]);
UBXSerial->write(UBX.UBX_HEADER[1]);
for(uint32_t i =0; i<sizeof(UBX.Message.cfgRate); i++){
UBXSerial->write(((uint8_t*)(&UBX.Message.cfgRate))[i]);
DEBUG_SENSOR_LOG(PSTR("UBX: cfgRate byte %u: %x"), i, ((uint8_t*)(&UBX.Message.cfgRate))[i]);
}
UBX.state.log_interval = 10*interval;
}
void UBXSelectMode(uint16_t mode){
DEBUG_SENSOR_LOG(PSTR("UBX: set mode to %u"),mode);
switch(mode){
#ifdef USE_FLOG
case 0:
Flog->mode = 0; // write once to all available sectors, then stop
break;
case 1:
Flog->mode = 1; // write to all available sectors, then restart and overwrite the older ones
break;
case 2:
UBX.mode.filter_noise = true; // filter out horizontal drift noise, TODO: find useful values
break;
case 3:
UBX.mode.filter_noise = false;
break;
case 4:
Flog->startRecording(true);
AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: start recording - appending"));
break;
case 5:
Flog->startRecording(false);
AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: start recording - new log"));
break;
case 6:
if(Flog->recording == true){
Flog->stopRecording();
}
AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: stop recording"));
break;
case 7:
UBX.mode.send_when_new = 1; // send mqtt on new postion + TELE -> consider to set TELE to a very high value
break;
case 8:
UBX.mode.send_when_new = 0; // only TELE
break;
case 9:
if (timeServer.beginListening()){
UBX.mode.runningNTP = true;
}
break;
case 10:
UBX.mode.runningNTP = false;
break;
case 11:
UBX.mode.forceUTCupdate = true;
break;
case 12:
UBX.mode.forceUTCupdate = false;
break;
case 13:
Settings.latitude = UBX.state.last_lat;
Settings.longitude = UBX.state.last_lon;
break;
#endif //USE_FLOG
default:
if(mode>1000 && mode <1066) {
// UBXSetRate(mode-1000); // min. 1001 = 0.001 Hz, but will be converted to 1/65535 anyway ~0.015 Hz, max. 2000 = 1.000 Hz
UBXSetRate(mode-1000); // set interval between measurements in seconds from 1 to 65
}
break;
}
UBX.mode.send_UI_only = true;
UBXTriggerTele();
}
/********************************************************************************************/
bool UBXHandlePOSLLH(){
DEBUG_SENSOR_LOG(PSTR("UBX: iTOW: %u"),UBX.Message.navPosllh.iTOW);
if(UBX.state.gpsFix>1){
if(UBX.mode.filter_noise){
if((UBX.Message.navPosllh.lat-UBX.rec_buffer.values.lat<abs(UBX_LAT_LON_THRESHOLD))||(UBX.Message.navPosllh.lon-UBX.rec_buffer.values.lon<abs(UBX_LAT_LON_THRESHOLD))){
DEBUG_SENSOR_LOG(PSTR("UBX: Diff lat: %u lon: %u "),UBX.Message.navPosllh.lat-UBX.rec_buffer.values.lat, UBX.Message.navPosllh.lon-UBX.rec_buffer.values.lon);
return false; //no new position
}
}
UBX.rec_buffer.values.lat = UBX.Message.navPosllh.lat;
UBX.rec_buffer.values.lon = UBX.Message.navPosllh.lon;
DEBUG_SENSOR_LOG(PSTR("UBX: lat/lon: %i / %i"),UBX.rec_buffer.values.lat, UBX.rec_buffer.values.lon);
DEBUG_SENSOR_LOG(PSTR("UBX: hAcc: %d"),UBX.Message.navPosllh.hAcc);
UBX.state.last_iTOW = UBX.Message.navPosllh.iTOW;
UBX.state.last_height = UBX.Message.navPosllh.height;
UBX.state.last_vAcc = UBX.Message.navPosllh.vAcc;
UBX.state.last_hAcc = UBX.Message.navPosllh.hAcc;
if(UBX.mode.send_when_new){
UBXTriggerTele();
}
return true; // new position
}
else {
DEBUG_SENSOR_LOG(PSTR("UBX: no valid position data"));
}
return false; // no GPS-fix
}
void UBXHandleSTATUS(){
DEBUG_SENSOR_LOG(PSTR("UBX: gpsFix: %u, valid: %u"),UBX.Message.navStatus.gpsFix, (UBX.Message.navStatus.flags)&1);
if((UBX.Message.navStatus.flags)&1){
UBX.state.gpsFix = UBX.Message.navStatus.gpsFix; //only store fixed status if flag is valid
}
else{
UBX.state.gpsFix = 0; // without valid flag, everything is "no fix"
}
}
void UBXHandleTIME(){
DEBUG_SENSOR_LOG(PSTR("UBX: UTC-Time: %u-%u-%u %u:%u:%u"),UBX.Message.navTime.year, UBX.Message.navTime.month ,UBX.Message.navTime.day,UBX.Message.navTime.hour,UBX.Message.navTime.min,UBX.Message.navTime.sec);
if(UBX.Message.navTime.valid.UTC){
DEBUG_SENSOR_LOG(PSTR("UBX: UTC-Time is valid"));
if(Rtc.user_time_entry == false || UBX.mode.forceUTCupdate){
AddLog_P(LOG_LEVEL_INFO, PSTR("UBX: UTC-Time is valid, set system time"));
TIME_T gpsTime;
gpsTime.year = UBX.Message.navTime.year - 1970;
gpsTime.month = UBX.Message.navTime.month;
gpsTime.day_of_month = UBX.Message.navTime.day;
gpsTime.hour = UBX.Message.navTime.hour;
gpsTime.minute = UBX.Message.navTime.min;
gpsTime.second = UBX.Message.navTime.sec;
Rtc.utc_time = MakeTime(gpsTime);
Rtc.user_time_entry = true;
}
}
}
void UBXHandleOther(void){
if(UBX.state.non_empty_loops>6){ // we expect only 4-5 non-empty loops in a row, could change with other sensor speed (Hz)
UBXinitCFG(); // this should only happen with lots of NMEA-messages, but it is only a guess!!
AddLog_P(LOG_LEVEL_ERROR, PSTR("UBX: possible device-reset, will re-init"));
UBXSerial->flush();
UBX.state.non_empty_loops = 0;
}
}
/********************************************************************************************/
void UBXTimeServer(){
if(UBX.mode.runningNTP){
timeServer.processOneRequest(Rtc.utc_time, UBX.state.last_iTOW%1000);
}
}
void UBXLoop(void)
{
static uint16_t counter; //count up every 100 msec
static bool new_position;
uint32_t msgType = UBXprocessGPS();
switch(msgType){
case MT_NAV_POSLLH:
new_position = UBXHandlePOSLLH();
break;
case MT_NAV_STATUS:
UBXHandleSTATUS();
break;
case MT_NAV_TIME:
UBXHandleTIME();
break;
default:
UBXHandleOther();
break;
}
#ifdef USE_FLOG
if(counter>UBX.state.log_interval){
if(Flog->recording && new_position){
UBX.rec_buffer.values.time = Rtc.local_time;
Flog->addToBuffer(UBX.rec_buffer.bytes, sizeof(UBX.rec_buffer.bytes));
counter = 0;
}
}
#endif // USE_FLOG
counter++;
}
/********************************************************************************************/
// normaly in i18n.h
#ifdef USE_WEBSERVER
// {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
#ifdef USE_FLOG
#ifdef DEBUG_TASMOTA_SENSOR
const char HTTP_SNS_FLOGVER[] PROGMEM = "{s}<hr>{m}<hr>{e}{s} FLOG with %u sectors: {m}%u bytes{e}"
"{s} FLOG next sector for REC: {m} %u {e}"
"{s} %u sector(s) with data at sector: {m} %u {e}";
const char HTTP_SNS_FLOGREC[] PROGMEM = "{s} RECORDING (bytes in buffer) {m}%u{e}";
#endif // DEBUG_TASMOTA_SENSOR
const char HTTP_SNS_FLOG[] PROGMEM = "{s}<hr>{m}<hr>{e}{s} Flash-Log {m} %s{e}";
const char kFLOG_STATE0[] PROGMEM = "ready";
const char kFLOG_STATE1[] PROGMEM = "recording";
const char * kFLOG_STATE[] ={kFLOG_STATE0, kFLOG_STATE1};
const char HTTP_BTN_FLOG_DL[] PROGMEM = "<button><a href='/UBX'>Download GPX-File</a></button>";
#endif //USE_FLOG
const char HTTP_SNS_NTPSERVER[] PROGMEM = "{s} NTP server {m}active{e}";
const char HTTP_SNS_GPS[] PROGMEM = "{s} GPS latitude {m}%s{e}"
"{s} GPS longitude {m}%s{e}"
"{s} GPS height {m}%s m{e}"
"{s} GPS hor. Accuracy {m}%s m{e}"
"{s} GPS vert. Accuracy {m}%s m{e}"
"{s} GPS sat-fix status {m}%s{e}";
const char kGPSFix0[] PROGMEM = "no fix";
const char kGPSFix1[] PROGMEM = "dead reckoning only";
const char kGPSFix2[] PROGMEM = "2D-fix";
const char kGPSFix3[] PROGMEM = "3D-fix";
const char kGPSFix4[] PROGMEM = "GPS + dead reckoning combined";
const char kGPSFix5[] PROGMEM = "Time only fix";
const char * kGPSFix[] PROGMEM ={kGPSFix0, kGPSFix1, kGPSFix2, kGPSFix3, kGPSFix4, kGPSFix5};
// const char UBX_GOOGLE_MAPS[] ="<iframe width='100%%' src='https://maps.google.com/maps?width=&amp;height=&amp;hl=en&amp;q=%s %s+(Tasmota)&amp;ie=UTF8&amp;t=&amp;z=10&amp;iwloc=B&amp;output=embed' frameborder='0' scrolling='no' marginheight='0' marginwidth='0'></iframe>";
#endif // USE_WEBSERVER
/********************************************************************************************/
void UBXShow(bool json)
{
char lat[12];
char lon[12];
char height[12];
char hAcc[12];
char vAcc[12];
dtostrfd((double)UBX.rec_buffer.values.lat/10000000.0f,7,lat);
dtostrfd((double)UBX.rec_buffer.values.lon/10000000.0f,7,lon);
dtostrfd((double)UBX.state.last_height/1000.0f,3,height);
dtostrfd((double)UBX.state.last_vAcc/1000.0f,3,hAcc);
dtostrfd((double)UBX.state.last_hAcc/1000.0f,3,vAcc);
if (json) {
ResponseAppend_P(PSTR(",\"GPS\":{"));
if(UBX.mode.send_UI_only){
uint32_t i = UBX.state.log_interval / 10;
ResponseAppend_P(PSTR("\"fil\":%u,\"int\":%u}"),UBX.mode.filter_noise, i);
}
else{
ResponseAppend_P(PSTR("\"lat\":%s,\"lon\":%s,\"height\":%s,\"hAcc\":%s,\"vAcc\":%s}"), lat, lon, height, hAcc, vAcc);
}
#ifdef USE_FLOG
ResponseAppend_P(PSTR(",\"FLOG\":{\"rec\":%u,\"mode\":%u,\"sec\":%u}"), Flog->recording, Flog->mode, Flog->sectors_left);
#endif //USE_FLOG
UBX.mode.send_UI_only = false;
#ifdef USE_WEBSERVER
} else {
WSContentSend_PD(HTTP_SNS_GPS, lat, lon, height, hAcc, vAcc, kGPSFix[UBX.state.gpsFix]);
// WSContentSend_PD(UBX_GOOGLE_MAPS, lat, lon);
#ifdef DEBUG_TASMOTA_SENSOR
#ifdef USE_FLOG
WSContentSend_PD(HTTP_SNS_FLOGVER, Flog->num_sectors, Flog->size, Flog->current_sector, Flog->sectors_left, Flog->sector.header.physical_start_sector);
if(Flog->recording){
WSContentSend_PD(HTTP_SNS_FLOGREC, Flog->sector.header.buf_pointer - 8);
}
#endif //USE_FLOG
#endif // DEBUG_TASMOTA_SENSOR
#ifdef USE_FLOG
if(Flog->ready){
WSContentSend_P(HTTP_SNS_FLOG,kFLOG_STATE[Flog->recording]);
}
if(!Flog->recording && Flog->found_saved_data){
WSContentSend_P(HTTP_BTN_FLOG_DL);
}
#endif //USE_FLOG
if(UBX.mode.runningNTP){
WSContentSend_P(HTTP_SNS_NTPSERVER);
}
#endif // USE_WEBSERVER
}
}
/*********************************************************************************************\
* check the UBX commands
\*********************************************************************************************/
bool UBXCmd(void) {
bool serviced = true;
if (XdrvMailbox.data_len > 0) {
UBXSelectMode(XdrvMailbox.payload);
Response_P(S_JSON_UBX_COMMAND_NVALUE, XdrvMailbox.command, XdrvMailbox.payload);
}
return serviced;
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
#define XSNS_58 58
bool Xsns58(uint8_t function)
{
bool result = false;
if (true) {
switch (function) {
case FUNC_INIT:
UBXDetect();
break;
case FUNC_COMMAND_SENSOR:
if (XSNS_92 == XdrvMailbox.index){
result = UBXCmd();
}
break;
case FUNC_EVERY_50_MSECOND:
UBXTimeServer();
break;
case FUNC_EVERY_100_MSECOND:
#ifdef USE_FLOG
if(!Flog->running_download)
#endif //USE_FLOG
{
UBXLoop();
}
break;
#ifdef USE_FLOG
case FUNC_WEB_ADD_HANDLER:
WebServer->on("/UBX", UBXsendFile);
break;
#endif //USE_FLOG
case FUNC_JSON_APPEND:
UBXShow(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
#ifdef USE_FLOG
if(!Flog->running_download)
#endif //USE_FLOG
{
UBXShow(0);
}
break;
#endif // USE_WEBSERVER
}
}
return result;
}
#endif // USE_GPS_UBX