Merge branch 'development' into development

README.md

@@ -15,7 +15,7 @@ If you like **Sonoff-Tasmota**, give it a star, or fork it and contribute!
 ### Development
 [![Build Status](https://img.shields.io/travis/arendst/Sonoff-Tasmota.svg)](https://travis-ci.org/arendst/Sonoff-Tasmota)
 
-Current version is **6.0.0c** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
+Current version is **6.1.1b** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for release information and [sonoff/_changelog.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_changelog.ino) for change information.
 
 ### Disclaimer
 :warning: **DANGER OF ELECTROCUTION** :warning:
@@ -39,7 +39,7 @@ If you want to compile Sonoff-Tasmota yourself keep in mind the following:
 - Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
 - After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.
 
-### Migration Instructions
+### Migration Information
 See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
 
 1. Migrate to **Sonoff-Tasmota 3.9.x**
@@ -134,34 +134,34 @@ Different firmware images are released based on Features and Sensors selection g
 | USE_ADS1115                    | - | - | - | - | x |
 | USE_ADS1115_I2CDEV             | - | - | - | - | - |
 | USE_INA219                     | - | - | - | - | x |
-| USE_APDS9960                   | - | - | - | - | - |
 | USE_MGS                        | - | - | - | - | x |
 | USE_SPI                        | - | - | - | - | - |
 | USE_MHZ19                      | x | x | - | x | x |
-| USE_SENSEAIR                   | x | x | - | x | x |
+| USE_SENSEAIR                   | x | - | - | x | x |
-| USE_PMS5003                    | x | x | - | x | x |
+| USE_PMS5003                    | x | - | - | x | x |
 | USE_NOVA_SDS                   | x | - | - | x | x |
-| USE_PZEM004T                   | x | x | - | x | x |
+| USE_PZEM004T                   | x | - | - | x | x |
 | USE_SERIAL_BRIDGE              | x | - | - | x | x |
-| USE_SDM120                     | x | - | - | - | x |
+| USE_SDM120                     | - | - | - | - | x |
-| USE_SDM630                     | x | - | - | - | x |
+| USE_SDM630                     | - | - | - | - | x |
 | USE_IR_REMOTE                  | x | x | - | x | x |
 | USE_IR_HVAC                    | - | - | - | - | x |
 | USE_IR_RECEIVE                 | x | - | - | x | x |
 | USE_WS2812                     | x | x | - | x | x |
 | USE_WS2812_DMA                 | - | - | - | - | - |
-| USE_ARILUX_RF                  | x | x | - | x | x |
+| USE_ARILUX_RF                  | x | - | - | x | x |
 | USE_SR04                       | x | - | - | x | x |
-| USE_TM1638                     | - | - | - | - | - |
 | USE_RF_FLASH                   | x | - | - | x | x |
 
-#### Typical File Size
+#### Typical file size
 
 | ESP/Arduino library version | sonoff | classic | minimal | knx  | allsensors |
 |-----------------------------|--------|---------|---------|------|------------|
-| ESP/Arduino lib v2.3.0      | 529k   | 490k    | 429k    | 538k | 554k       |
+| ESP/Arduino lib v2.3.0      | 538k   | 490k    | 407k    | 548k | 562k       |
-| ESP/Arduino lib v2.4.0      | 534k   | 498k    | 436k    | 542k | 558k       |
+| ESP/Arduino lib v2.4.0      | 543k   | 498k    | 414k    | 553k | 565k       |
-| ESP/Arduino lib v2.4.1      | 536k   | 501k    | 439k    | 545k | 560k       |
+| ESP/Arduino lib v2.4.1      | 544k   | 500k    | 416k    | 555k | 567k       |
+
+See [Tasmota ESP/Arduino library version related issues](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips#20180523---relation-tasmota-and-esp8266arduino-core-version) for more information.
 
 ### Contribute
 You can contribute to Sonoff-Tasmota by
@@ -176,13 +176,14 @@ You can contribute to Sonoff-Tasmota by
 #### Libraries Used
 Libraries used with Sonoff-Tasmota are:
 - [ESP8266 core for Arduino](https://github.com/esp8266/Arduino)
-- [Adafruit BME680](https://github.com/adafruit/Adafruit_BME680)
-- [Adafruit Sensor](https://github.com/adafruit/Adafruit_Sensor)
 - [Adafruit SGP30](https://github.com/adafruit/Adafruit_SGP30)
 - [ArduinoJson](https://arduinojson.org/)
+- [Bosch BME680](https://github.com/BoschSensortec/BME680_driver)
+- [C2 Programmer](http://app.cear.ufpb.br/~lucas.hartmann/tag/efm8bb1/)
 - [Esp8266MqttClient](https://github.com/tuanpmt/ESP8266MQTTClient)
 - [esp-knx-ip](https://github.com/envy/esp-knx-ip)
 - [esp-mqtt-arduino](https://github.com/i-n-g-o/esp-mqtt-arduino)
+- [ESPAsyncUDP](https://github.com/me-no-dev/ESPAsyncUDP)
 - [I2Cdevlib](https://github.com/jrowberg/i2cdevlib)
 - [IRremoteEsp8266](https://github.com/markszabo/IRremoteESP8266)
 - [JobaTsl2561](https://github.com/joba-1/Joba_Tsl2561)

lib/Joba_Tsl2561-2.0.7/examples/Autogain/Autogain.ino

@@ -21,6 +21,17 @@ This file is part of the Joba_Tsl2561 Library.
 
 #include <Tsl2561Util.h>
 
+// to mimic Serial.printf() of esp8266 core for other platforms
+char *format( const char *fmt, ... ) {
+  static char buf[128];
+  va_list arg;
+  va_start(arg, fmt);
+  vsnprintf(buf, sizeof(buf), fmt, arg);
+  buf[sizeof(buf)-1] = '\0';
+  va_end(arg);
+  return buf;
+}
+
 Tsl2561 Tsl(Wire);
 uint8_t id;
 
@@ -35,31 +46,30 @@ void setup() {
 }
 
 void loop() {
-  uint16_t scaledFull = ~0, scaledIr = ~0;
+  uint16_t scaledFull = 0xffff, scaledIr = 0xffff;
-  uint32_t full = ~0, ir = ~0, milliLux = ~0;
+  uint32_t full = 0xffffffff, ir = 0xffffffff, milliLux = 0xffffffff;
   bool gain = false;
   Tsl2561::exposure_t exposure = Tsl2561::EXP_OFF;
 
   if( Tsl2561Util::autoGain(Tsl, gain, exposure, scaledFull, scaledIr) ) {
     if( Tsl2561Util::normalizedLuminosity(gain, exposure, full = scaledFull, ir = scaledIr) ) {
-      if( Tsl2561Util::milliLux(full, ir, milliLux, Tsl2561::packageCS(id)) ) {
+      if( Tsl2561Util::milliLux(full, ir, milliLux, Tsl2561::packageCS(id), 5) ) {
-        Serial.printf("Tsl2561 addr: 0x%02x, id: 0x%02x, sfull: %5u, sir: %5u, full: %5u, ir: %5u, gain: %d, exp: %d, lux: %5u.%03u\n", 
+        Serial.print(format("Tsl2561 addr: 0x%02x, id: 0x%02x, sfull: %5u, sir: %5u, full: %7lu, ir: %7lu, gain: %d, exp: %d, lux: %5lu.%03lu\n",
-          Tsl.address(), id, scaledFull, scaledIr, full, ir, gain, exposure, milliLux/1000, milliLux%1000);
+          Tsl.address(), id, scaledFull, scaledIr, (unsigned long)full, (unsigned long)ir, gain, exposure, (unsigned long)milliLux/1000, (unsigned long)milliLux%1000));
       }
       else {
-        Serial.printf("Tsl2561Util::milliLux(full=%u, ir=%u) error\n", full, ir);
+        Serial.print(format("Tsl2561Util::milliLux(full=%lu, ir=%lu) error\n", (unsigned long)full, (unsigned long)ir));
       }
     }
     else {
-      Serial.printf("Tsl2561Util::normalizedLuminosity(gain=%u, exposure=%u, sfull=%u, sir=%u, full=%u, ir=%u) error\n", 
+      Serial.print(format("Tsl2561Util::normalizedLuminosity(gain=%u, exposure=%u, sfull=%u, sir=%u, full=%lu, ir=%lu) error\n",
-        gain, exposure, scaledFull, scaledIr, full, ir);
+        gain, exposure, scaledFull, scaledIr, (unsigned long)full, (unsigned long)ir));
     }
   }
   else {
-    Serial.printf("Tsl2561Util::autoGain(gain=%u, exposure=%u, sfull=%u, sir=%u) error\n", 
+    Serial.print(format("Tsl2561Util::autoGain(gain=%u, exposure=%u, sfull=%u, sir=%u) error\n",
-      gain, exposure, scaledFull, scaledIr);
+      gain, exposure, scaledFull, scaledIr));
   }
 
   delay(1000);
 }
-

lib/Joba_Tsl2561-2.0.7/examples/Simple/Simple.ino

@@ -21,6 +21,17 @@ This file is part of the Joba_Tsl2561 Library.
 
 #include <Tsl2561.h>
 
+// to mimic Serial.printf() of esp8266 core for other platforms
+char *format( const char *fmt, ... ) {
+  static char buf[128];
+  va_list arg;
+  va_start(arg, fmt);
+  vsnprintf(buf, sizeof(buf), fmt, arg);
+  buf[sizeof(buf)-1] = '\0';
+  va_end(arg);
+  return buf;
+}
+
 Tsl2561 Tsl(Wire);
 
 void setup() {
@@ -44,7 +55,7 @@ void loop() {
     Tsl.fullLuminosity(full);
     Tsl.irLuminosity(ir);
 
-    Serial.printf("Tsl2561 at 0x%02x(id=0x%02x) luminosity is %5u (full) and %5u (ir)\n", Tsl.address(), id, full, ir);
+    Serial.print(format("Tsl2561 at 0x%02x(id=0x%02x) luminosity is %5u (full) and %5u (ir)\n", Tsl.address(), id, full, ir));
 
     Tsl.off();
   }

lib/Joba_Tsl2561-2.0.7/examples/Testing/Testing.ino

@@ -22,11 +22,22 @@ This file is part of the Joba_Tsl2561 Library.
 
 #include <Tsl2561.h>
 
+// to mimic Serial.printf() of esp8266 core for other platforms
+char *format( const char *fmt, ... ) {
+  static char buf[128];
+  va_list arg;
+  va_start(arg, fmt);
+  vsnprintf(buf, sizeof(buf), fmt, arg);
+  buf[sizeof(buf)-1] = '\0';
+  va_end(arg);
+  return buf;
+}
+
 Tsl2561 Tsl(Wire);
 
 void showError( Tsl2561 &tsl ) {
   Tsl2561::status_t status = tsl.status();
-  Serial.printf("Error was %u: ", status);
+  Serial.print(format("Error was %u: ", status));
   switch( status ) {
     case Tsl2561::ERR_OK: Serial.println("None"); break;
     case Tsl2561::ERR_RW: Serial.println("Read/Write"); break;
@@ -40,7 +51,7 @@ void showError( Tsl2561 &tsl ) {
 void testSensitivity( Tsl2561 &tsl, bool newGain, Tsl2561::exposure_t newExp ) {
   if( tsl.on() ) {
     uint32_t start = millis();
-    Serial.printf("Chip powered on at %u\n", start);
+    Serial.print(format("Chip powered on at %lu\n", (unsigned long)start));
 
     bool chipGain;
     Tsl2561::exposure_t chipExp;
@@ -58,7 +69,7 @@ void testSensitivity( Tsl2561 &tsl, bool newGain, Tsl2561::exposure_t newExp ) {
     bool check = true;
     if( change ) {
       if( tsl.setSensitivity(newGain, newExp) ) {
-        Serial.printf("New gain = %d, exposure = 0x%02x\n", newGain, newExp);
+        Serial.print(format("New gain = %d, exposure = 0x%02x\n", newGain, newExp));
       }
       else {
         check = false;
@@ -69,6 +80,7 @@ void testSensitivity( Tsl2561 &tsl, bool newGain, Tsl2561::exposure_t newExp ) {
 
     if( check ) {
       uint16_t ir, full = 0;
+
       while( !full && millis() - start < 1000 ) {
         if( !tsl.fullLuminosity(full) ) {
           Serial.print("Check full luminosity failed. ");
@@ -89,7 +101,7 @@ void testSensitivity( Tsl2561 &tsl, bool newGain, Tsl2561::exposure_t newExp ) {
         Serial.println("No luminosity reading after 1s. Too dark?");
       }
       else {
-        Serial.printf("Got luminosity after %d ms. Full spectrum is %d and IR only is %d\n", millis() - start, full, ir);
+        Serial.print(format("Got luminosity after %lu ms. Full spectrum is %u and IR only is %u\n", (unsigned long)millis() - start, full, ir));
       }
     }
 
@@ -107,7 +119,7 @@ void testSensitivity( Tsl2561 &tsl, bool newGain, Tsl2561::exposure_t newExp ) {
 bool testPackage( Tsl2561 &tsl ) {
   uint8_t id;
   if( tsl.id(id) ) {
-    Serial.printf("Chip has type %02x and revision %x\n", Tsl2561::type(id), Tsl2561::revision(id) );
+    Serial.print(format("Chip has type %02x and revision %x\n", Tsl2561::type(id), Tsl2561::revision(id)));
     if( Tsl2561::packageT_FN_CL(id) ) {
       Serial.println("Chip is a T, FN or CL type package");
     }
@@ -128,7 +140,7 @@ bool testPackage( Tsl2561 &tsl ) {
 
 void test( Tsl2561 &tsl ) {
   bool ok = tsl.available();
-  Serial.printf("\nTesting Tsl2561 at address %02x: %sfound\n", tsl.address(), ok ? "" : "NOT ");
+  Serial.print(format("\nTesting Tsl2561 at address %02x: %sfound\n", tsl.address(), ok ? "" : "NOT "));
   if( ok ) {
     if( testPackage(tsl) ) {
       testSensitivity(tsl, Tsl2561::GAIN_OFF, Tsl2561::EXP_402);
@@ -160,4 +172,3 @@ void loop() {
   Serial.println("\nNext test in 5s\n");
   delay(5000);
 }
-

lib/Joba_Tsl2561-2.0.7/examples/Utility/Utility.ino

@@ -21,6 +21,17 @@ This file is part of the Joba_Tsl2561 Library.
 
 #include <Tsl2561Util.h>
 
+// to mimic Serial.printf() of esp8266 core for other platforms
+char *format( const char *fmt, ... ) {
+  static char buf[128];
+  va_list arg;
+  va_start(arg, fmt);
+  vsnprintf(buf, sizeof(buf), fmt, arg);
+  buf[sizeof(buf)-1] = '\0';
+  va_end(arg);
+  return buf;
+}
+
 Tsl2561::address_t addr[] = { Tsl2561::ADDR_GND, Tsl2561::ADDR_FLOAT, Tsl2561::ADDR_VDD };
 Tsl2561 Tsl(Wire);
 
@@ -58,18 +69,19 @@ void loop() {
           Tsl.fullLuminosity(scaledFull);
           Tsl.irLuminosity(scaledIr);
 
-          Serial.printf("Tsl2561 addr: 0x%02x, id: 0x%02x, sfull: %5u, sir: %5u, gain: %d, exp: %d", addr[i], id, scaledFull, scaledIr, gain, exposure);
+          Serial.print(format("Tsl2561 addr: 0x%02x, id: 0x%02x, sfull: %5u, sir: %5u, gain: %d, exp: %d",
+            addr[i], id, scaledFull, scaledIr, gain, exposure));
 
           if( Tsl2561Util::normalizedLuminosity(gain, exposure, full = scaledFull, ir = scaledIr) ) {
             if( Tsl2561Util::milliLux(full, ir, milliLux, Tsl2561::packageCS(id)) ) {
-              Serial.printf(", full: %5u, ir: %5u, lux: %5u.%03u\n", full, ir, milliLux/1000, milliLux%1000);
+              Serial.print(format(", full: %5lu, ir: %5lu, lux: %5lu.%03lu\n", (unsigned long)full, (unsigned long)ir, (unsigned long)milliLux/1000, (unsigned long)milliLux%1000));
             }
             else {
-              Serial.printf(", full: %5u, ir: %5u: Tsl2561Util::milliLux() error\n", full, ir);
+              Serial.print(format(", full: %5lu, ir: %5lu: Tsl2561Util::milliLux() error\n", (unsigned long)full, (unsigned long)ir));
             }
           }
           else {
-            Serial.printf(", full: %5u, ir: %5u: Tsl2561Util::normalizedLuminosity() error\n", full, ir);
+            Serial.print(format(", full: %5lu, ir: %5lu: Tsl2561Util::normalizedLuminosity() error\n", (unsigned long)full, (unsigned long)ir));
           }
 
           Tsl.off();
@@ -84,4 +96,3 @@ void loop() {
 
   delay(5000);
 }
-

lib/Joba_Tsl2561-2.0.7/examples/platformio.ini

@@ -0,0 +1,61 @@
+; PlatformIO Project Configuration File
+;
+; Example config for flashing nodemcuv2 boards via linux serial port
+;
+; Adapt (e.g. platform, board, port) to your environment as needed.
+; Then call platformio.sh to copy the file to all examples.
+; Now cd to the example directory (e.g. Autogain/) and do "pio run"
+; to build it or directly upload with "pio run --target upload".
+; Watch the serial output of your sketch with "pio device monitor".
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; http://docs.platformio.org/page/projectconf.html
+
+
+[platformio]
+src_dir = .
+lib_dir = ../..
+
+; uncomment one, if you want to build only one
+; env_default = nodemcuv2
+; env_default = nano328
+
+[env:nodemcuv2]
+; TSL <-> ESP8266
+; ------------
+; GND <-> GND
+; VCC <-> 3V
+; SCL <-> D1
+; SDA <-> D2
+platform = espressif8266
+board = nodemcuv2
+framework = arduino
+build_flags = -Wall
+
+monitor_speed = 115200
+
+upload_speed = 230400
+upload_resetmethod = nodemcu
+;usually upload port is autodetected
+;upload_port = /dev/ttyUSB[1-9]
+
+
+[env:nano328]
+; TSL <-> NANO
+; ------------
+; GND <-> GND
+; VCC <-> 3V3
+; SCL <-> A5
+; SDA <-> A4
+platform = atmelavr
+board = nanoatmega328
+framework = arduino
+build_flags = -Wall
+
+monitor_speed = 115200
+;upload_port = /dev/ttyUSB[1-9]

lib/Joba_Tsl2561-2.0.7/examples/platformio.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+#
+# Create platformio.ini templates for all examples, if missing.
+# Start this script from within the examples directory.
+
+for d in *; do
+  if [ -d "$d" -a -f "$d/$d.ino" -a ! -e "$d/platformio.ini" ]
+  then
+    cp -av platformio.ini "$d/"
+  fi
+done
+

lib/Joba_Tsl2561-2.0.7/lib/readme.txt

@@ -0,0 +1,36 @@
+
+This directory is intended for the project specific (private) libraries.
+PlatformIO will compile them to static libraries and link to executable file.
+
+The source code of each library should be placed in separate directory, like
+"lib/private_lib/[here are source files]".
+
+For example, see how can be organized `Foo` and `Bar` libraries:
+
+|--lib
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |- readme.txt --> THIS FILE
+|- platformio.ini
+|--src
+   |- main.c
+
+Then in `src/main.c` you should use:
+
+#include <Foo.h>
+#include <Bar.h>
+
+// rest H/C/CPP code
+
+PlatformIO will find your libraries automatically, configure preprocessor's
+include paths and build them.
+
+More information about PlatformIO Library Dependency Finder
+- http://docs.platformio.org/page/librarymanager/ldf.html

lib/Joba_Tsl2561-2.0.7/library.json

@@ -1,6 +1,6 @@
 {
   "name": "Joba_Tsl2561",
-  "version": "2.0.1",
+  "version": "2.0.7",
   "keywords": "twowire, i2c, bus, sensor, luminosity, illuminance, lux",
   "description": "Arduino Library for ams (taos) luminance chip Tsl2561 with autogain",
   "repository":

lib/Joba_Tsl2561-2.0.7/library.properties

@@ -1,5 +1,5 @@
 name=Joba Tsl2561 Library
-version=2.0.1
+version=2.0.7
 author=joba-1
 maintainer=joba-1 <joban123.psn@gmail.com>
 sentence=IoT library for using the Tsl2561 luminosity sensor

lib/Joba_Tsl2561-2.0.7/platformio.ini

@@ -0,0 +1,58 @@
+; PlatformIO Project Configuration File
+;
+; Example config for flashing nodemcuv2 boards via linux serial port
+;
+; Adapt (e.g. platform, board, port) to your environment as needed.
+; Then call platformio.sh to copy the file to all examples.
+; Now cd to the example directory (e.g. Autogain/) and do "pio run"
+; to build it or directly upload with "pio run --target upload".
+; Watch the serial output of your sketch with "pio device monitor".
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; http://docs.platformio.org/page/projectconf.html
+
+
+[platformio]
+; uncomment one, if you want to build only one
+; env_default = nodemcuv2
+; env_default = nano328
+
+
+[env:nodemcuv2]
+; TSL <-> ESP8266
+; ------------
+; GND <-> GND
+; VCC <-> 3V
+; SCL <-> D1
+; SDA <-> D2
+platform = espressif8266
+board = nodemcuv2
+framework = arduino
+build_flags = -Wall
+
+monitor_speed = 115200
+
+upload_speed = 230400
+upload_resetmethod = nodemcu
+;usually upload port is autodetected
+;upload_port = /dev/ttyUSB[1-9]
+
+
+[env:nano328]
+; TSL <-> NANO
+; ------------
+; GND <-> GND
+; VCC <-> 3V3
+; SCL <-> A5
+; SDA <-> A4
+platform = atmelavr
+board = nanoatmega328
+framework = arduino
+build_flags = -Wall
+
+monitor_speed = 115200

lib/Joba_Tsl2561-2.0.7/src/Tsl2561.cpp

@@ -29,7 +29,7 @@ bool Tsl2561::available() {
 
 bool Tsl2561::begin( address_t addr ) {
   _addr = addr;
-  return available();  
+  return available();
 }
 
 bool Tsl2561::begin() {
@@ -48,24 +48,30 @@ bool Tsl2561::begin() {
 bool Tsl2561::readByte( register_t reg, uint8_t &val ) {
   _wire.beginTransmission(_addr);
   _wire.write(reg | CONTROL_CMD);
-  if( _wire.endTransmission(false) == ERR_OK ) {
+  if( (_status = static_cast<status_t>(_wire.endTransmission(false))) == ERR_OK ) {
-    if( _wire.requestFrom(_addr, 1) ) {
+    if( _wire.requestFrom(_addr, 1) == 1 ) {
       val = static_cast<uint8_t>(_wire.read());
     }
+    else {
+      _status = ERR_RW;
+    }
   }
-  return (_status = static_cast<status_t>(_wire.endTransmission())) == ERR_OK;
+  return _status == ERR_OK;
 }
 
 bool Tsl2561::readWord( register_t reg, uint16_t &val ) {
   _wire.beginTransmission(_addr);
   _wire.write(reg | CONTROL_CMD);
-  if( _wire.endTransmission(false) == ERR_OK ) {
+  if( (_status = static_cast<status_t>(_wire.endTransmission(false))) == ERR_OK ) {
-    if( _wire.requestFrom(_addr, 2) ) {
+    if( _wire.requestFrom(_addr, 2) == 2 ) {
-      val = (uint16_t)_wire.read() & 0xff;
+      val = static_cast<uint16_t>(_wire.read()) & 0xff;
-      val |= ((uint16_t)_wire.read() & 0xff) << 8;
+      val |= (static_cast<uint16_t>(_wire.read()) & 0xff) << 8;
+    }
+    else {
+      _status = ERR_RW;
     }
   }
-  return (_status = static_cast<status_t>(_wire.endTransmission())) == ERR_OK;
+  return _status == ERR_OK;
 }
 
 bool Tsl2561::writeByte( register_t reg, uint8_t val ) {

lib/Joba_Tsl2561-2.0.7/src/Tsl2561Util.cpp

@@ -39,22 +39,22 @@ bool normalizedLuminosity( bool gain, Tsl2561::exposure_t exposure, uint32_t &fu
 
     switch( exposure ) {
       case Tsl2561::EXP_14:
-        full = (scaledFull >=  5047/4*3) ? ~0 : ((full + 5) * 322) / 11;
+        full = (scaledFull >=  5047/4*3) ? 0xffffffff : ((full + 5) * 322) / 11;
-        ir   = (scaledIr   >=  5047/4*3) ? ~0 : ((ir   + 5) * 322) / 11;
+        ir   = (scaledIr   >=  5047/4*3) ? 0xffffffff : ((ir   + 5) * 322) / 11;
         break;
       case Tsl2561::EXP_101:
-        full = (scaledFull >= 37177/4*3) ? ~0 : ((full + 40) * 322) / 81;
+        full = (scaledFull >= 37177/4*3) ? 0xffffffff : ((full + 40) * 322) / 81;
-        ir   = (scaledIr   >= 37177/4*3) ? ~0 : ((ir   + 40) * 322) / 81;
+        ir   = (scaledIr   >= 37177/4*3) ? 0xffffffff : ((ir   + 40) * 322) / 81;
         break;
       case Tsl2561::EXP_402:
-        if( scaledFull >= 65535/4*3 ) full = ~0;
+        if( scaledFull >= 65535/4*3 ) full = 0xffffffff;
-        if( scaledIr   >= 65535/4*3 ) ir   = ~0;
+        if( scaledIr   >= 65535/4*3 ) ir   = 0xffffffff;
         break;
       default:
         return false;
     }
 
-    return full != ~0U && ir != ~0U;
+    return full != 0xffffffff && ir != 0xffffffff;
   }
 
   return false;
@@ -72,9 +72,9 @@ uint16_t getLimit( Tsl2561::exposure_t exposure ) {
 // Wait for one measurement interval plus some empirically tested extra millis
 void waitNext( Tsl2561::exposure_t exposure ) {
   switch( exposure ) {
-    case Tsl2561::EXP_14:  delay(16);  break;
+    case Tsl2561::EXP_14:  delay(Tsl2561Util::DELAY_EXP_14);  break;
-    case Tsl2561::EXP_101: delay(103); break;
+    case Tsl2561::EXP_101: delay(Tsl2561Util::DELAY_EXP_101); break;
-    default:               delay(408); break;
+    default:               delay(Tsl2561Util::DELAY_EXP_402); break;
   }
 }
 
@@ -95,7 +95,7 @@ bool autoGain( Tsl2561 &tsl, bool &gain, Tsl2561::exposure_t &exposure, uint16_t
 
   // get current sensitivity
   if( !tsl.getSensitivity(gain, exposure) ) {
-    return false;
+    return false; // I2C error
   }
 
   // find index of current sensitivity
@@ -111,11 +111,13 @@ bool autoGain( Tsl2561 &tsl, bool &gain, Tsl2561::exposure_t &exposure, uint16_t
   }
 
   // in a loop wait for next sample, get values and adjust sensitivity if needed
+  uint8_t retryOnSaturated = 10;
+
   while( true ) {
     waitNext(exposure);
 
     if( !tsl.fullLuminosity(full) || !tsl.irLuminosity(ir) ) {
-      return false;
+      return false; // I2C error
     }
 
     uint16_t limit = getLimit(exposure);
@@ -126,13 +128,15 @@ bool autoGain( Tsl2561 &tsl, bool &gain, Tsl2561::exposure_t &exposure, uint16_t
     if( (full < 1000 && ++curr < sizeof(sensitivity)/sizeof(sensitivity[0]))
      || (full > limit && curr-- > 0) ) {
       if( !tsl.setSensitivity(sensitivity[curr].gain, sensitivity[curr].exposure) ) {
-        return false;
+        return false; // I2C error
       }
       gain = sensitivity[curr].gain;
       exposure = sensitivity[curr].exposure;
     }
     else {
-      return true; // saturated, but best we can do
+      if( ++curr > 0 && retryOnSaturated-- == 0 ) {
+        return true; // saturated, but best we can do
+      }
     }
   }
 }
@@ -141,16 +145,32 @@ bool autoGain( Tsl2561 &tsl, bool &gain, Tsl2561::exposure_t &exposure, uint16_t
 bool compensateTemperature( int16_t centiCelsius, uint32_t &full, uint32_t &ir ) {
   // assume linear gradient 0% at 25°C to +20% at 70°C
   if( centiCelsius >= -3000 && centiCelsius <= 7000 ) {
-    full -= (full * (centiCelsius - 2500) * 20) / (100 * (7000 - 2500));
+    full -= (full * (centiCelsius - 2500)) / (5 * (7000 - 2500));
-    ir   -= (ir   * (centiCelsius - 2500) * 20) / (100 * (7000 - 2500));
+    ir   -= (ir   * (centiCelsius - 2500)) / (5 * (7000 - 2500));
     return true;
   }
 
   return false;
 }
 
+// Round num after valid digits
+uint32_t significance( uint32_t num, uint8_t digits ) {
+  uint8_t len = 1;
+  uint32_t n = num;
+  while( n /= 10 ) {
+    len++;
+  }
+
+  uint32_t e10 = 1;
+  while( len-- > digits ) {
+    e10 *= 10;
+  }
+
+  return ((num + e10 / 2) / e10) * e10;
+}
+
 // Calculate lux from raw luminosity values
-bool milliLux( uint32_t full, uint32_t ir, uint32_t &mLux, bool csType ) {
+bool milliLux( uint32_t full, uint32_t ir, uint32_t &mLux, bool csType, uint8_t digits ) {
   if( !full ) {
     mLux = 0;
     return true;
@@ -187,6 +207,8 @@ bool milliLux( uint32_t full, uint32_t ir, uint32_t &mLux, bool csType ) {
     mLux /= 400 * 16 / 193; // 33 = counts/lux (cpl)
   }
 
+  mLux = significance(mLux, digits); // only the first 4 digits seem to make sense.
+
   return true;
 }
 

lib/Joba_Tsl2561-2.0.7/src/Tsl2561Util.h

@@ -24,6 +24,14 @@ This file is part of the Joba_Tsl2561 Library.
 
 namespace Tsl2561Util {
 
+  // Some chips may need higher values.
+  // Tweak here if autogain does not return valid results.
+  typedef enum {
+    DELAY_EXP_14  = 20,  // Max. delay in ms after
+    DELAY_EXP_101 = 110, // starting a measurement until
+    DELAY_EXP_402 = 430  // the first values arrive.
+  } delay_t;
+
   // delay until next sample is available
   void waitNext( Tsl2561::exposure_t exposure );
 
@@ -40,9 +48,11 @@ namespace Tsl2561Util {
   // adjust luminosity according to sensor temperature (max +/-20% from 25°C)
   bool compensateTemperature( int16_t centiCelsius, uint32_t &full, uint32_t &ir );
 
-  // calculate lux from normalized (and optionally temperature adjusted) luminosity
+  // helper function to round after significant digits (~4 digits for Tsl2561)
-  bool milliLux( uint32_t full, uint32_t ir, uint32_t &milliLux, bool csType = false );
+  uint32_t significance( uint32_t value, uint8_t digits );
 
+  // calculate lux from normalized (and optionally temperature adjusted) luminosity
+  bool milliLux( uint32_t full, uint32_t ir, uint32_t &milliLux, bool csType = false, uint8_t digits = 4 );
 };
 
 #endif

platformio.ini

@@ -39,7 +39,7 @@ platform = espressif8266@1.5.0
 ; *** Esp8266 core for Arduino version 2.4.0
 ;platform = espressif8266@1.6.0
 ; *** Esp8266 core for Arduino version 2.4.1
-;platform = espressif8266@1.7.0
+;platform = espressif8266@1.7.3
 ; *** Esp8266 core for Arduino version latest beta
 ;platform = https://github.com/platformio/platform-espressif8266.git#feature/stage
 ; *** Esp8266 core for Arduino current version
@@ -62,8 +62,7 @@ build_flags =
 monitor_speed = 115200
 
 ; *** Upload Serial reset method for Wemos and NodeMCU
-;upload_speed = 115200
+upload_speed = 115200
-upload_speed = 512000
 upload_resetmethod = nodemcu
 upload_port = COM5
 ; *** Fix Esp/Arduino core 2.4.x induced Tasmota unused floating point includes

sonoff/i18n.h

@@ -215,6 +215,7 @@
   #define D_WCFG_3_WPSCONFIG "WPSConfig"
   #define D_WCFG_4_RETRY "Retry"
   #define D_WCFG_5_WAIT "Wait"
+  #define D_WCFG_6_SERIAL "Serial"
 #define D_CMND_FRIENDLYNAME "FriendlyName"
 #define D_CMND_SWITCHMODE "SwitchMode"
 #define D_CMND_TELEPERIOD "TelePeriod"
@@ -471,6 +472,7 @@ const char S_JSON_COMMAND_INDEX_NVALUE_ACTIVE_NVALUE[] PROGMEM = "{\"%s%d\":\"%d
 const char S_JSON_SENSOR_INDEX_NVALUE[] PROGMEM =            "{\"" D_CMND_SENSOR "%d\":%d}";
 const char S_JSON_SENSOR_INDEX_SVALUE[] PROGMEM =            "{\"" D_CMND_SENSOR "%d\":\"%s\"}";
 
+const char JSON_SNS_TEMP[] PROGMEM = "%s,\"%s\":{\"" D_JSON_TEMPERATURE "\":%s}";
 const char JSON_SNS_TEMPHUM[] PROGMEM = "%s,\"%s\":{\"" D_JSON_TEMPERATURE "\":%s,\"" D_JSON_HUMIDITY "\":%s}";
 
 const char S_LOG_I2C_FOUND_AT[] PROGMEM = D_LOG_I2C "%s " D_FOUND_AT " 0x%x";
@@ -498,7 +500,8 @@ const char kWifiConfig[MAX_WIFI_OPTION][WCFG_MAX_STRING_LENGTH] PROGMEM = {
   D_WCFG_2_WIFIMANAGER,
   D_WCFG_3_WPSCONFIG,
   D_WCFG_4_RETRY,
-  D_WCFG_5_WAIT };
+  D_WCFG_5_WAIT,
+  D_WCFG_6_SERIAL };
 const char kPrefixes[3][PRFX_MAX_STRING_LENGTH] PROGMEM = {
   D_CMND,
   D_STAT,

sonoff/language/bg-BG.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Подтвърдете рестартирането"
 
 #define D_CONFIGURE_MODULE "Конфигурация на модула"
+#define D_CONFIGURE_MCP230XX "Конфигурация на MCP230xx"
 #define D_CONFIGURE_WIFI "Конфигурация на WiFi"
 #define D_CONFIGURE_MQTT "Конфигурация на MQTT"
 #define D_CONFIGURE_DOMOTICZ "Конфигурация на Domoticz"

sonoff/language/cs-CZ.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Potvrzení restartu"
 
 #define D_CONFIGURE_MODULE "Nastavení modulu"
+#define D_CONFIGURE_MCP230XX "Nastavení MCP230xx"
 #define D_CONFIGURE_WIFI "Nastavení WiFi"
 #define D_CONFIGURE_MQTT "Nastavení MQTT"
 #define D_CONFIGURE_DOMOTICZ "Nastavení Domoticz"

sonoff/language/de-DE.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Wirklich neustarten?"
 
 #define D_CONFIGURE_MODULE "Gerät konfigurieren"
+#define D_CONFIGURE_MCP230XX "MCP230xx konfigurieren"
 #define D_CONFIGURE_WIFI "WLAN konfigurieren"
 #define D_CONFIGURE_MQTT "MQTT konfigurieren"
 #define D_CONFIGURE_DOMOTICZ "Domoticz konfigurieren"

sonoff/language/el-GR.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Επιβεβαίωση Επανεκκίνησης"
 
 #define D_CONFIGURE_MODULE "Ρύθμιση Module"
+#define D_CONFIGURE_MCP230XX "Ρύθμιση MCP230xx"
 #define D_CONFIGURE_WIFI "Ρύθμιση WiFi"
 #define D_CONFIGURE_MQTT "Ρύθμιση MQTT"
 #define D_CONFIGURE_DOMOTICZ "Ρύθμιση Domoticz"

sonoff/language/en-GB.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Confirm Restart"
 
 #define D_CONFIGURE_MODULE "Configure Module"
+#define D_CONFIGURE_MCP230XX "Configure MCP230xx"
 #define D_CONFIGURE_WIFI "Configure WiFi"
 #define D_CONFIGURE_MQTT "Configure MQTT"
 #define D_CONFIGURE_DOMOTICZ "Configure Domoticz"

sonoff/language/es-AR.h

@@ -131,7 +131,7 @@
 #define D_PROGRAM_SIZE "Tamaño Programa"
 #define D_PROJECT "Proyecto"
 #define D_RECEIVED "Recibido"
-#define D_RESTART "Reinicio"
+#define D_RESTART "Reiniciar"
 #define D_RESTARTING "Reiniciando"
 #define D_RESTART_REASON "Causa Reinicio"
 #define D_RESTORE "Restauración"
@@ -168,7 +168,7 @@
 #define D_WEB_SERVER "Servidor Web"
 
 // sonoff.ino
-#define D_WARNING_MINIMAL_VERSION "Precaución, esta versión no salva los cambios"
+#define D_WARNING_MINIMAL_VERSION "Cuidado, esta versión no guarda los cambios"
 #define D_LEVEL_10 "level 1-0"
 #define D_LEVEL_01 "level 0-1"
 #define D_SERIAL_LOGGING_DISABLED "Log serial deshabilitado"
@@ -188,12 +188,12 @@
 #define D_PATCH_ISSUE_2186 "Patch issue 2186"
 #define D_CONNECTING_TO_AP "Connectando a AP"
 #define D_IN_MODE "en modo"
-#define D_CONNECT_FAILED_NO_IP_ADDRESS "Falló Conección, Dirección IP no recibida"
+#define D_CONNECT_FAILED_NO_IP_ADDRESS "Falló Conexión, Dirección IP no recibida"
-#define D_CONNECT_FAILED_AP_NOT_REACHED "Falló Conección, AP no pudo ser contactado"
+#define D_CONNECT_FAILED_AP_NOT_REACHED "Falló Conexión, AP no pudo ser contactado"
-#define D_CONNECT_FAILED_WRONG_PASSWORD "Falló Conección, clave de AP incorrecta"
+#define D_CONNECT_FAILED_WRONG_PASSWORD "Falló Conexión, clave de AP incorrecta"
-#define D_CONNECT_FAILED_AP_TIMEOUT "Falló Conección, timeout de AP"
+#define D_CONNECT_FAILED_AP_TIMEOUT "Falló Conexión, timeout de AP"
 #define D_ATTEMPTING_CONNECTION "Intentando conectar..."
-#define D_CHECKING_CONNECTION "Probando conección..."
+#define D_CHECKING_CONNECTION "Probando conexión..."
 #define D_QUERY_DONE "Consulta lista. Servicio MQTT encontrado"
 #define D_MQTT_SERVICE_FOUND "Servicio MQTT encontrado en"
 #define D_FOUND_AT "encontrado en"
@@ -211,22 +211,23 @@
 #define D_WITH_IP_ADDRESS "con dirección IP"
 #define D_WEBSERVER_STOPPED "Servidor web detenido"
 #define D_FILE_NOT_FOUND "Archivo No Encontrado"
-#define D_REDIRECTED "Redireccinado al portal captivo"
+#define D_REDIRECTED "Redireccionado al portal captivo"
 #define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager como AccessPoint y Estación"
 #define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager como AccessPoint"
 #define D_TRYING_TO_CONNECT "Intentado conectar dispositivo a la red"
 
 #define D_RESTART_IN "Reinicio en"
 #define D_SECONDS "segundos"
-#define D_DEVICE_WILL_RESTART "El dispositivo se reiniciará en pocos segundos"
+#define D_DEVICE_WILL_RESTART "El dispositivo se reiniciará en unos segundos"
 #define D_BUTTON_TOGGLE "Alternar ON/OFF"
 #define D_CONFIGURATION "Configuración"
 #define D_INFORMATION "Información"
-#define D_FIRMWARE_UPGRADE "Actualización Firmware"
+#define D_FIRMWARE_UPGRADE "Actualizar Firmware"
 #define D_CONSOLE "Consola"
 #define D_CONFIRM_RESTART "Confirmar Reinicio"
 
 #define D_CONFIGURE_MODULE "Configuración del Módulo"
+#define D_CONFIGURE_MCP230XX "Configuración MCP230xx"
 #define D_CONFIGURE_WIFI "Configuración WiFi"
 #define D_CONFIGURE_MQTT "Configuración MQTT"
 #define D_CONFIGURE_DOMOTICZ "Configuración Domoticz"
@@ -239,7 +240,7 @@
 #define D_MAIN_MENU "Menú Principal"
 
 #define D_MODULE_PARAMETERS "Parámetros del módulo"
-#define D_MODULE_TYPE "Tipo módulo"
+#define D_MODULE_TYPE "Tipo de módulo"
 #define D_GPIO "GPIO"
 #define D_SERIAL_IN "Serial In"
 #define D_SERIAL_OUT "Serial Out"
@@ -250,7 +251,7 @@
 #define D_NO_NETWORKS_FOUND "Ninguna red encontrada"
 #define D_REFRESH_TO_SCAN_AGAIN "Recargar página para buscar nuevamente"
 #define D_DUPLICATE_ACCESSPOINT "AccessPoint duplicado"
-#define D_SKIPPING_LOW_QUALITY "Ignorado debido a baja calidad"
+#define D_SKIPPING_LOW_QUALITY "Ignorado por baja calidad"
 #define D_RSSI "RSSI"
 #define D_WEP "WEP"
 #define D_WPA_PSK "WPA PSK"
@@ -268,7 +269,7 @@
 #define D_SERIAL_LOG_LEVEL "Nivel de log Serial"
 #define D_WEB_LOG_LEVEL "Nivel de log Web"
 #define D_SYS_LOG_LEVEL "Nivel de Syslog"
-#define D_MORE_DEBUG "Mas Debug"
+#define D_MORE_DEBUG "Más Debug"
 #define D_SYSLOG_HOST "Host del Syslog"
 #define D_SYSLOG_PORT "Puerto del Syslog"
 #define D_TELEMETRY_PERIOD "Período de Telemetría"
@@ -287,7 +288,7 @@
 #define D_CONFIGURATION_RESET "Configuración restablecida"
 
 #define D_PROGRAM_VERSION "Versión del Programa"
-#define D_BUILD_DATE_AND_TIME "Fecha y Hora de la Compilación"
+#define D_BUILD_DATE_AND_TIME "Fecha y Hora de Compilación"
 #define D_CORE_AND_SDK_VERSION "Versión Core/SDK"
 #define D_FLASH_WRITE_COUNT "Contador de escritura en Flash"
 #define D_MAC_ADDRESS "Dirección MAC"
@@ -333,16 +334,16 @@
 
 // xdrv_01_mqtt.ino
 #define D_FINGERPRINT "Verificar TLS fingerprint..."
-#define D_TLS_CONNECT_FAILED_TO "Falló Conección TLS a"
+#define D_TLS_CONNECT_FAILED_TO "Falló Conexión TLS a"
 #define D_RETRY_IN "Reintentando"
 #define D_VERIFIED "Verificado Fingerprint"
-#define D_INSECURE "Conección insegura por Fingerprint no válido"
+#define D_INSECURE "Conexión insegura por Fingerprint inválido"
-#define D_CONNECT_FAILED_TO "Falló Conección a"
+#define D_CONNECT_FAILED_TO "Falló Conexión a"
 
 // xplg_wemohue.ino
 #define D_MULTICAST_DISABLED "Multicast deshabilitado"
 #define D_MULTICAST_REJOINED "Multicast (re)conectado"
-#define D_MULTICAST_JOIN_FAILED "Conección Multicast fallida"
+#define D_MULTICAST_JOIN_FAILED "Conexión Multicast fallida"
 #define D_FAILED_TO_SEND_RESPONSE "Falla al enviar respuesta"
 
 #define D_WEMO "WeMo"

sonoff/language/fr-FR.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Confirmer redémarrage"
 
 #define D_CONFIGURE_MODULE "Configuration du Module"
+#define D_CONFIGURE_MCP230XX "Configuration MCP230xx"
 #define D_CONFIGURE_WIFI "Configuration WiFi"
 #define D_CONFIGURE_MQTT "Configuration MQTT"
 #define D_CONFIGURE_DOMOTICZ "Configuration Domoticz"

sonoff/language/hu-HU.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Újraindítás megerősítése"
 
 #define D_CONFIGURE_MODULE "Eszköz konfiguráció"
+#define D_CONFIGURE_MCP230XX "MCP230xx konfiguráció"
 #define D_CONFIGURE_WIFI "WiFi konfiguráció"
 #define D_CONFIGURE_MQTT "MQTT konfiguráció"
 #define D_CONFIGURE_DOMOTICZ "Domoticz konfiguráció"

sonoff/language/it-IT.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Conferma Riavvio"
 
 #define D_CONFIGURE_MODULE "Configurazione Modulo"
+#define D_CONFIGURE_MCP230XX "Configurazione MCP230xx"
 #define D_CONFIGURE_WIFI "Configurazione WiFi"
 #define D_CONFIGURE_MQTT "Configurazione MQTT"
 #define D_CONFIGURE_DOMOTICZ "Configurazione Domoticz"

sonoff/language/nl-NL.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Bevestig herstart"
 
 #define D_CONFIGURE_MODULE "Configureer Module"
+#define D_CONFIGURE_MCP230XX "Configureer MCP230xx"
 #define D_CONFIGURE_WIFI "Configureer WiFi"
 #define D_CONFIGURE_MQTT "Configureer MQTT"
 #define D_CONFIGURE_DOMOTICZ "Configureer Domoticz"

sonoff/language/pl-PL.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Potwierdź restart"
 
 #define D_CONFIGURE_MODULE "Konfiguruj moduł"
+#define D_CONFIGURE_MCP230XX "Konfiguruj MCP230xx"
 #define D_CONFIGURE_WIFI "Konfiguruj WiFi"
 #define D_CONFIGURE_MQTT "Konfiguruj MQTT"
 #define D_CONFIGURE_DOMOTICZ "Konfiguruj Domoticz"

sonoff/language/pt-BR.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Confirmar o reinicio"
 
 #define D_CONFIGURE_MODULE "Configurar Módulo"
+#define D_CONFIGURE_MCP230XX "Configurar MCP230xx"
 #define D_CONFIGURE_WIFI "Configurar WiFi"
 #define D_CONFIGURE_MQTT "Configurar MQTT"
 #define D_CONFIGURE_DOMOTICZ "Configurar Domoticz"

sonoff/language/pt-PT.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Confirmar o reinicio"
 
 #define D_CONFIGURE_MODULE "Configurar Módulo"
+#define D_CONFIGURE_MCP230XX "Configurar MCP230xx"
 #define D_CONFIGURE_WIFI "Configurar WiFi"
 #define D_CONFIGURE_MQTT "Configurar MQTT"
 #define D_CONFIGURE_DOMOTICZ "Configurar Domoticz"

sonoff/language/ru-RU.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Подтвердить перезагрузку"
 
 #define D_CONFIGURE_MODULE "Конфигурация Модуля"
+#define D_CONFIGURE_MCP230XX "Конфигурация MCP230xx"
 #define D_CONFIGURE_WIFI "Конфигурация WiFi"
 #define D_CONFIGURE_MQTT "Конфигурация MQTT"
 #define D_CONFIGURE_DOMOTICZ "Конфигурация Domoticz"

sonoff/language/uk-UK.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "Підтвердити перезавантаження"
 
 #define D_CONFIGURE_MODULE "Конфігурація модуля"
+#define D_CONFIGURE_MCP230XX "Конфігурація MCP230xx"
 #define D_CONFIGURE_WIFI "Конфігурація WiFi"
 #define D_CONFIGURE_MQTT "Конфігурація MQTT"
 #define D_CONFIGURE_DOMOTICZ "Конфігурація Domoticz"

sonoff/language/zh-CN.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "确认重启"
 
 #define D_CONFIGURE_MODULE "模块设置"
+#define D_CONFIGURE_MCP230XX "MCP230xx设置"
 #define D_CONFIGURE_WIFI "WiFi设置"
 #define D_CONFIGURE_MQTT "MQTT设置"
 #define D_CONFIGURE_DOMOTICZ "Domoticz设置"

sonoff/language/zh-TW.h

@@ -227,6 +227,7 @@
 #define D_CONFIRM_RESTART "確認重啟"
 
 #define D_CONFIGURE_MODULE "模塊設置"
+#define D_CONFIGURE_MCP230XX "MCP230xx設置"
 #define D_CONFIGURE_WIFI "WiFi設置"
 #define D_CONFIGURE_MQTT "MQTT設置"
 #define D_CONFIGURE_DOMOTICZ "Domoticz設置"

sonoff/settings.h

@@ -56,7 +56,7 @@ typedef union {                            // Restricted by MISRA-C Rule 18.4 bu
     uint32_t rf_receive_decimal : 1;       // bit 28 (v6.0.0a)
     uint32_t ir_receive_decimal : 1;       // bit 29 (v6.0.0a)
     uint32_t hass_light : 1;               // bit 30 (v6.0.0b)
-    uint32_t spare31 : 1;
+    uint32_t global_state : 1;             // bit 31 (v6.1.0)
   };
 } SysBitfield;
 
@@ -394,6 +394,20 @@ typedef union {                            // Restricted by MISRA-C Rule 18.4 bu
   };
 } RulesBitfield;
 
+typedef union {
+  uint8_t data;
+  struct {
+    uint8_t wifi_down : 1;
+    uint8_t mqtt_down : 1;
+    uint8_t spare02 : 1;
+    uint8_t spare03 : 1;
+    uint8_t spare04 : 1;
+    uint8_t spare05 : 1;
+    uint8_t spare06 : 1;
+    uint8_t spare07 : 1;
+  };
+} StateBitfield;
+
 // See issue https://github.com/esp8266/Arduino/issues/2913
 #ifdef USE_ADC_VCC
   ADC_MODE(ADC_VCC);                       // Set ADC input for Power Supply Voltage usage

sonoff/sonoff.h

@@ -95,6 +95,8 @@ typedef unsigned long power_t;              // Power (Relay) type
 #define LOGSZ                  512          // Max number of characters in log
 #define MIN_MESSZ              893          // Min number of characters in MQTT message
 
+#define SENSOR_MAX_MISS        5            // Max number of missed sensor reads before deciding it's offline
+
 #ifdef USE_MQTT_TLS
   #define WEB_LOG_SIZE         2000         // Max number of characters in weblog
 #else
@@ -109,11 +111,15 @@ typedef unsigned long power_t;              // Power (Relay) type
 #define SERIAL_POLLING         100          // Serial receive polling in ms
 #define MAX_STATUS             11           // Max number of status lines
 
+#define NO_EXTRA_4K_HEAP                    // Allocate 4k heap for WPS in ESP8166/Arduino core v2.4.2 (was always allocated in previous versions)
+
 /*
 // Removed from esp8266 core since 20171105
 #define min(a,b) ((a)<(b)?(a):(b))
 #define max(a,b) ((a)>(b)?(a):(b))
 */
+#define tmin(a,b) ((a)<(b)?(a):(b))
+#define tmax(a,b) ((a)>(b)?(a):(b))
 
 #define STR_HELPER(x) #x
 #define STR(x) STR_HELPER(x)
@@ -167,7 +173,7 @@ enum GetDateAndTimeOptions { DT_LOCAL, DT_UTC, DT_RESTART, DT_UPTIME };
 
 enum LoggingLevels {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL};
 
-enum WifiConfigOptions {WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, MAX_WIFI_OPTION};
+enum WifiConfigOptions {WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL, MAX_WIFI_OPTION};
 
 enum SwitchModeOptions {TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE, MAX_SWITCH_OPTION};
 

sonoff/sonoff.ino

@@ -25,7 +25,7 @@
     - Select IDE Tools - Flash Size: "1M (no SPIFFS)"
   ====================================================*/
 
-#define VERSION                0x06000003   // 6.0.0c
+#define VERSION                0x06010102   // 6.1.1b
 
 // Location specific includes
 #include <core_version.h>                   // Arduino_Esp8266 version information (ARDUINO_ESP8266_RELEASE and ARDUINO_ESP8266_RELEASE_2_3_0)
@@ -161,6 +161,7 @@ uint8_t stop_flash_rotate = 0;              // Allow flash configuration rotatio
 
 int blinks = 201;                           // Number of LED blinks
 uint8_t blinkstate = 0;                     // LED state
+uint8_t blinkspeed = 1;                     // LED blink rate
 
 uint8_t blockgpio0 = 4;                     // Block GPIO0 for 4 seconds after poweron to workaround Wemos D1 RTS circuit
 uint8_t lastbutton[MAX_KEYS] = { NOT_PRESSED, NOT_PRESSED, NOT_PRESSED, NOT_PRESSED };  // Last button states
@@ -169,7 +170,7 @@ uint8_t multiwindow[MAX_KEYS] = { 0 };      // Max time between button presses t
 uint8_t multipress[MAX_KEYS] = { 0 };       // Number of button presses within multiwindow
 uint8_t lastwallswitch[MAX_SWITCHES];       // Last wall switch states
 uint8_t holdwallswitch[MAX_SWITCHES] = { 0 };  // Timer for wallswitch push button hold
-uint8_t virtualswitch[MAX_SWITCHES] = { 0 };   // Virtual switch states
+uint8_t virtualswitch[MAX_SWITCHES];        // Virtual switch states
 
 mytmplt my_module;                          // Active copy of Module name and GPIOs
 uint8_t pin[GPIO_MAX];                      // Possible pin configurations
@@ -184,6 +185,7 @@ uint8_t light_type = 0;                     // Light types
 bool pwm_present = false;                   // Any PWM channel configured with SetOption15 0
 boolean mdns_begun = false;
 uint8_t ntp_force_sync = 0;                 // Force NTP sync
+StateBitfield global_state;
 RulesBitfield rules_flag;
 
 char my_version[33];                        // Composed version string
@@ -540,6 +542,53 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
       mqtt_data[0] = '\0';
       MqttShowState();
     }
+    else if (CMND_SLEEP == command_code) {
+      if ((payload >= 0) && (payload < 251)) {
+        if ((!Settings.sleep && payload) || (Settings.sleep && !payload)) restart_flag = 2;
+        Settings.sleep = payload;
+        sleep = payload;
+      }
+      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_UNIT_NVALUE_UNIT, command, sleep, (Settings.flag.value_units) ? " " D_UNIT_MILLISECOND : "", Settings.sleep, (Settings.flag.value_units) ? " " D_UNIT_MILLISECOND : "");
+    }
+    else if ((CMND_UPGRADE == command_code) || (CMND_UPLOAD == command_code)) {
+      // Check if the payload is numerically 1, and had no trailing chars.
+      //   e.g. "1foo" or "1.2.3" could fool us.
+      // Check if the version we have been asked to upgrade to is higher than our current version.
+      //   We also need at least 3 chars to make a valid version number string.
+      if (((1 == data_len) && (1 == payload)) || ((data_len >= 3) && NewerVersion(dataBuf))) {
+        ota_state_flag = 3;
+//        snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_VERSION " %s " D_JSON_FROM " %s\"}", command, my_version, Settings.ota_url);
+        snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_VERSION " %s " D_JSON_FROM " %s\"}", command, my_version, GetOtaUrl(stemp1, sizeof(stemp1)));
+      } else {
+        snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_ONE_OR_GT "\"}", command, my_version);
+      }
+    }
+    else if (CMND_OTAURL == command_code) {
+      if ((data_len > 0) && (data_len < sizeof(Settings.ota_url)))
+        strlcpy(Settings.ota_url, (1 == payload) ? OTA_URL : dataBuf, sizeof(Settings.ota_url));
+      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.ota_url);
+    }
+    else if (CMND_SERIALLOG == command_code) {
+      if ((payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) {
+        Settings.flag.mqtt_serial = 0;
+        SetSeriallog(payload);
+      }
+      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE, command, Settings.seriallog_level, seriallog_level);
+    }
+    else if (CMND_RESTART == command_code) {
+      switch (payload) {
+      case 1:
+        restart_flag = 2;
+        snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_RESTARTING);
+        break;
+      case 99:
+        AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_APPLICATION D_RESTARTING));
+        EspRestart();
+        break;
+      default:
+        snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_ONE_TO_RESTART);
+      }
+    }
     else if ((CMND_POWERONSTATE == command_code) && (Settings.module != MOTOR)) {
       /* 0 = Keep relays off after power on
        * 1 = Turn relays on after power on, if PulseTime set wait for PulseTime seconds, and turn relays off
@@ -854,32 +903,6 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
       }
       snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.pulse_counter_debounce);
     }
-    else if (CMND_SLEEP == command_code) {
-      if ((payload >= 0) && (payload < 251)) {
-        if ((!Settings.sleep && payload) || (Settings.sleep && !payload)) restart_flag = 2;
-        Settings.sleep = payload;
-        sleep = payload;
-      }
-      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_UNIT_NVALUE_UNIT, command, sleep, (Settings.flag.value_units) ? " " D_UNIT_MILLISECOND : "", Settings.sleep, (Settings.flag.value_units) ? " " D_UNIT_MILLISECOND : "");
-    }
-    else if ((CMND_UPGRADE == command_code) || (CMND_UPLOAD == command_code)) {
-      // Check if the payload is numerically 1, and had no trailing chars.
-      //   e.g. "1foo" or "1.2.3" could fool us.
-      // Check if the version we have been asked to upgrade to is higher than our current version.
-      //   We also need at least 3 chars to make a valid version number string.
-      if (((1 == data_len) && (1 == payload)) || ((data_len >= 3) && NewerVersion(dataBuf))) {
-        ota_state_flag = 3;
-//        snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_VERSION " %s " D_JSON_FROM " %s\"}", command, my_version, Settings.ota_url);
-        snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_VERSION " %s " D_JSON_FROM " %s\"}", command, my_version, GetOtaUrl(stemp1, sizeof(stemp1)));
-      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_ONE_OR_GT "\"}", command, my_version);
-      }
-    }
-    else if (CMND_OTAURL == command_code) {
-      if ((data_len > 0) && (data_len < sizeof(Settings.ota_url)))
-        strlcpy(Settings.ota_url, (1 == payload) ? OTA_URL : dataBuf, sizeof(Settings.ota_url));
-      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.ota_url);
-    }
     else if (CMND_BAUDRATE == command_code) {
       if (payload32 > 0) {
         payload32 /= 1200;  // Make it a valid baudrate
@@ -917,13 +940,6 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
       }
       snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.serial_delimiter);
     }
-    else if (CMND_SERIALLOG == command_code) {
-      if ((payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) {
-        Settings.flag.mqtt_serial = 0;
-        SetSeriallog(payload);
-      }
-      snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE, command, Settings.seriallog_level, seriallog_level);
-    }
     else if (CMND_SYSLOG == command_code) {
       if ((payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) {
         Settings.syslog_level = payload;
@@ -976,7 +992,7 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
     }
     else if ((CMND_SSID == command_code) && (index > 0) && (index <= 2)) {
       if ((data_len > 0) && (data_len < sizeof(Settings.sta_ssid[0]))) {
-        strlcpy(Settings.sta_ssid[index -1], (1 == payload) ? (1 == index) ? STA_SSID1 : STA_SSID2 : dataBuf, sizeof(Settings.sta_ssid[0]));
+        strlcpy(Settings.sta_ssid[index -1], (!strcmp(dataBuf,"0")) ? "" : (1 == payload) ? (1 == index) ? STA_SSID1 : STA_SSID2 : dataBuf, sizeof(Settings.sta_ssid[0]));
         Settings.sta_active = index -1;
         restart_flag = 2;
       }
@@ -984,7 +1000,7 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
     }
     else if ((CMND_PASSWORD == command_code) && (index > 0) && (index <= 2)) {
       if ((data_len > 0) && (data_len < sizeof(Settings.sta_pwd[0]))) {
-        strlcpy(Settings.sta_pwd[index -1], (1 == payload) ? (1 == index) ? STA_PASS1 : STA_PASS2 : dataBuf, sizeof(Settings.sta_pwd[0]));
+        strlcpy(Settings.sta_pwd[index -1], (!strcmp(dataBuf,"0")) ? "" : (1 == payload) ? (1 == index) ? STA_PASS1 : STA_PASS2 : dataBuf, sizeof(Settings.sta_pwd[0]));
         Settings.sta_active = index -1;
         restart_flag = 2;
         snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, Settings.sta_pwd[index -1]);
@@ -1040,20 +1056,6 @@ void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
       }
       snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_UNIT, command, Settings.tele_period, (Settings.flag.value_units) ? " " D_UNIT_SECOND : "");
     }
-    else if (CMND_RESTART == command_code) {
-      switch (payload) {
-      case 1:
-        restart_flag = 2;
-        snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_RESTARTING);
-        break;
-      case 99:
-        AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_APPLICATION D_RESTARTING));
-        EspRestart();
-        break;
-      default:
-        snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_ONE_TO_RESTART);
-      }
-    }
     else if (CMND_RESET == command_code) {
       switch (payload) {
       case 1:
@@ -1721,7 +1723,7 @@ void SwitchHandler(byte mode)
   uint8_t switchflag;
 
   for (byte i = 0; i < MAX_SWITCHES; i++) {
-    if (pin[GPIO_SWT1 +i] < 99) {
+    if ((pin[GPIO_SWT1 +i] < 99) || (mode)) {
 
       if (holdwallswitch[i]) {
         holdwallswitch[i]--;
@@ -1802,6 +1804,7 @@ void SwitchHandler(byte mode)
 void StateLoop()
 {
   power_t power_now;
+  uint8_t blinkinterval = 1;
 
   state_loop_timer = millis() + (1000 / STATES);
   state++;
@@ -1879,27 +1882,38 @@ void StateLoop()
 \*-------------------------------------------------------------------------------------------*/
 
   if (!(state % ((STATES/10)*2))) {
+    if (!Settings.flag.global_state) {                      // Problem blinkyblinky enabled
+      if (global_state.data) {                              // Any problem
+        if (global_state.mqtt_down) { blinkinterval = 9; }  // MQTT problem so blink every 2 seconds (slowest)
+        if (global_state.wifi_down) { blinkinterval = 4; }  // Wifi problem so blink every second (slow)
+        blinks = 201;                                       // Allow only a single blink in case the problem is solved
+      }
+    }
     if (blinks || restart_flag || ota_state_flag) {
-      if (restart_flag || ota_state_flag) {
+      if (restart_flag || ota_state_flag) {                 // Overrule blinks and keep led lit
-        blinkstate = 1;   // Stay lit
+        blinkstate = 1;                                     // Stay lit
       } else {
-        blinkstate ^= 1;  // Blink
+        blinkspeed--;
+        if (!blinkspeed) {
+          blinkspeed = blinkinterval;                       // Set interval to 0.2 (default), 1 or 2 seconds
+          blinkstate ^= 1;                                  // Blink
+        }
       }
       if ((!(Settings.ledstate &0x08)) && ((Settings.ledstate &0x06) || (blinks > 200) || (blinkstate))) {
-        SetLedPower(blinkstate);
+//      if ( (!Settings.flag.global_state && global_state.data) || ((!(Settings.ledstate &0x08)) && ((Settings.ledstate &0x06) || (blinks > 200) || (blinkstate))) ) {
+        SetLedPower(blinkstate);                            // Set led on or off
       }
       if (!blinkstate) {
         blinks--;
-        if (200 == blinks) blinks = 0;
+        if (200 == blinks) blinks = 0;                      // Disable blink
       }
-    } else {
+    }
-      if (Settings.ledstate &1) {
+    else if (Settings.ledstate &1) {
-        boolean tstate = power;
+      boolean tstate = power;
-        if ((SONOFF_TOUCH == Settings.module) || (SONOFF_T11 == Settings.module) || (SONOFF_T12 == Settings.module) || (SONOFF_T13 == Settings.module)) {
+      if ((SONOFF_TOUCH == Settings.module) || (SONOFF_T11 == Settings.module) || (SONOFF_T12 == Settings.module) || (SONOFF_T13 == Settings.module)) {
-          tstate = (!power) ? 1 : 0;
+        tstate = (!power) ? 1 : 0;                          // As requested invert signal for Touch devices to find them in the dark
-        }
-        SetLedPower(tstate);
       }
+      SetLedPower(tstate);
     }
   }
 
@@ -2142,6 +2156,7 @@ void SerialInput()
       }
     }
 
+#ifdef USE_ENERGY_SENSOR
 /*-------------------------------------------------------------------------------------------*\
  * Sonoff S31 and Sonoff Pow R2 4800 baud serial interface
 \*-------------------------------------------------------------------------------------------*/
@@ -2152,7 +2167,7 @@ void SerialInput()
         return;
       }
     }
-
+#endif  // USE_ENERGY_SENSOR
 /*-------------------------------------------------------------------------------------------*/
 
     if (serial_in_byte > 127) {                // binary data...
@@ -2364,10 +2379,13 @@ void GpioInit()
     }
   }
   for (byte i = 0; i < MAX_SWITCHES; i++) {
+    lastwallswitch[i] = 1;  // Init global to virtual switch state;
     if (pin[GPIO_SWT1 +i] < 99) {
       pinMode(pin[GPIO_SWT1 +i], (16 == pin[GPIO_SWT1 +i]) ? INPUT_PULLDOWN_16 :INPUT_PULLUP);
-      lastwallswitch[i] = digitalRead(pin[GPIO_SWT1 +i]);  // set global now so doesn't change the saved power state on first switch check
+      lastwallswitch[i] = digitalRead(pin[GPIO_SWT1 +i]);  // Set global now so doesn't change the saved power state on first switch check
+
     }
+    virtualswitch[i] = lastwallswitch[i];
   }
 
 #ifdef USE_WS2812

sonoff/sonoff_post.h

@@ -51,6 +51,7 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 #endif
 
 #define USE_DHT                               // Default DHT11 sensor needs no external library
+#define USE_ENERGY_SENSOR                     // Use energy sensors
 
 /*********************************************************************************************\
  * [sonoff-allsensors.bin]
@@ -58,6 +59,7 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 \*********************************************************************************************/
 
 #ifdef USE_ALL_SENSORS
+
 #define USE_ADC_VCC                           // Display Vcc in Power status. Disable for use as Analog input on selected devices
 #define USE_DS18x20                           // For more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
 //#define USE_DS18x20_LEGACY                     // For more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)
@@ -65,16 +67,19 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 #define USE_SHT                               // Add I2C emulating code for SHT1X sensor (+1k4 code)
 #define USE_SHT3X                             // Add I2C code for SHT3x sensor (+0k6 code)
 #define USE_HTU                               // Add I2C code for HTU21/SI7013/SI7020/SI7021 sensor (+1k5 code)
+#define USE_LM75AD                            // Add I2C code for LM75AD sensor (+0k5 code)
 #define USE_BMP                               // Add I2C code for BMP085/BMP180/BMP280/BME280 sensor (+4k code)
-  #define USE_BME680                          // Add additional support for BME680 sensor using Adafruit Sensor and BME680 libraries (+6k code)
+  #define USE_BME680                          // Add additional support for BME680 sensor using Bosch BME680 library (+4k code)
 #define USE_SGP30                             // Add I2C code for SGP30 sensor (+1k1 code)
 #define USE_BH1750                            // Add I2C code for BH1750 sensor (+0k5 code)
 #define USE_VEML6070                          // Add I2C code for VEML6070 sensor (+0k5 code)
 #define USE_TSL2561                           // Add I2C code for TSL2561 sensor using library Adafruit TSL2561 Arduino (+1k2 code)
+//#define USE_SI1145                            // Add I2C code for SI1145/46/47 sensor (+1k code)
 #define USE_ADS1115                           // Add I2C code for ADS1115 16 bit A/D converter based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
 //#define USE_ADS1115_I2CDEV                    // Add I2C code for ADS1115 16 bit A/D converter using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)
 #define USE_INA219                            // Add I2C code for INA219 Low voltage and current sensor (+1k code)
 #define USE_MGS                               // Add I2C code for Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
+//#define USE_APDS9960                          // Add I2C code for APDS9960 Proximity Sensor. Disables SHT and VEML6070 (+4k7 code)
 #define USE_MHZ19                             // Add support for MH-Z19 CO2 sensor (+2k code)
 #define USE_SENSEAIR                          // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
 #ifndef CO2_LOW
@@ -87,6 +92,8 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 #define USE_NOVA_SDS                          // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
 #define USE_PZEM004T                          // Add support for PZEM004T Energy monitor (+2k code)
 #define USE_SERIAL_BRIDGE                     // Add support for software Serial Bridge (+0k8 code)
+#define USE_SDM120                            // Add support for Eastron SDM120-Modbus energy meter (+1k7 code)
+#define USE_SDM630                            // Add support for Eastron SDM630-Modbus energy meter (+2k code)
 #define USE_IR_REMOTE                         // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
   #define USE_IR_HVAC                         // Support for HVAC system using IR (+2k code)
   #define USE_IR_RECEIVE                      // Support for IR receiver (+5k5 code, 264 iram)
@@ -105,36 +112,28 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 \*********************************************************************************************/
 
 #ifdef USE_CLASSIC
-#ifdef USE_KNX
+
-#undef USE_KNX
+#undef USE_KNX                                // Disable KNX IP Protocol Support
-#endif
+#undef USE_TIMERS                             // Disable support for up to 16 timers
-#ifdef USE_TIMERS
+#undef USE_TIMERS_WEB                         // Disable support for timer webpage
-#undef USE_TIMERS
+#undef USE_SUNRISE                            // Disable support for Sunrise and sunset tools
-#endif
+#undef USE_RULES                              // Disable support for rules
-#ifdef USE_TIMERS_WEB
+#undef USE_LM75AD                             // Disable sensor
-#undef USE_TIMERS_WEB
+#undef USE_BME680                             // Disable sensor
-#endif
+#undef USE_SGP30                              // Disable sensor
-#ifdef USE_SUNRISE
+#undef USE_SENSEAIR                           // Disable support for SenseAir K30, K70 and S8 CO2 sensor
-#undef USE_SUNRISE
+#undef USE_NOVA_SDS                           // Disable support for SDS011 and SDS021 particle concentration sensor
-#endif
+#undef USE_PZEM004T                           // Disable PZEM004T energy sensor
-#ifdef USE_RULES
+#undef USE_IR_RECEIVE                         // Disable support for IR receiver
-#undef USE_RULES
+#undef USE_SERIAL_BRIDGE                      // Disable support for software Serial Bridge
-#endif
+#undef USE_SDM120                             // Disable support for Eastron SDM120-Modbus energy meter
-#ifdef USE_SGP30
+#undef USE_SDM630                             // Disable support for Eastron SDM630-Modbus energy meter
-#undef USE_SGP30
+#undef USE_ARILUX_RF                          // Disable support for Arilux RF remote controller
-#endif
+#undef USE_SR04                               // Disable support for for HC-SR04 ultrasonic devices
-#ifdef USE_NOVA_SDS
+#undef USE_TM1638                             // Disable support for TM1638 switches copying Switch1 .. Switch8
-#undef USE_NOVA_SDS
+#undef USE_RF_FLASH                           // Disable support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB
-#endif
+#undef DEBUG_THEO                             // Disable debug code
-#ifdef USE_IR_RECEIVE
+#undef USE_DEBUG_DRIVER                       // Disable debug code
-#undef USE_IR_RECEIVE
-#endif
-#ifdef USE_SERIAL_BRIDGE
-#undef USE_SERIAL_BRIDGE
-#endif
-#ifdef USE_SR04
-#undef USE_SR04
-#endif
 #endif  // USE_CLASSIC
 
 /*********************************************************************************************\
@@ -143,12 +142,11 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 \*********************************************************************************************/
 
 #ifdef USE_KNX_NO_EMULATION
+
 #ifndef USE_KNX
 #define USE_KNX                               // Enable KNX IP Protocol Support (+23k code, +3k3 mem)
 #endif
-#ifdef USE_EMULATION
 #undef USE_EMULATION                          // Disable Belkin WeMo and Hue Bridge emulation for Alexa (-16k code, -2k mem)
-#endif
 #endif  // USE_KNX_NO_EMULATION
 
 /*********************************************************************************************\
@@ -166,96 +164,55 @@ void KNX_CB_Action(message_t const &msg, void *arg);
 \*********************************************************************************************/
 
 #ifdef BE_MINIMAL
-#ifdef USE_MQTT_TLS
+
-#undef USE_MQTT_TLS                           // Disable TLS support won't work as the MQTTHost is not set
+#undef USE_ENERGY_SENSOR                      // Disable energy sensors
-#endif
+#undef USE_ARDUINO_OTA                        // Disable support for Arduino OTA
-#ifdef USE_DISCOVERY
+#undef USE_WPS                                // Disable support for WPS as initial wifi configuration tool
-#undef USE_DISCOVERY                          // Disable Discovery services for both MQTT and web server
+#undef USE_SMARTCONFIG                        // Disable support for Wifi SmartConfig as initial wifi configuration tool
-#endif
-#ifdef USE_DOMOTICZ
 #undef USE_DOMOTICZ                           // Disable Domoticz
-#endif
-#ifdef USE_HOME_ASSISTANT
 #undef USE_HOME_ASSISTANT                     // Disable Home Assistant
-#endif
+#undef USE_MQTT_TLS                           // Disable TLS support won't work as the MQTTHost is not set
-#ifdef USE_KNX
 #undef USE_KNX                                // Disable KNX IP Protocol Support
-#endif
-//#ifdef USE_WEBSERVER
 //#undef USE_WEBSERVER                          // Disable Webserver
-//#endif
+#undef USE_DISCOVERY                          // Disable Discovery services for both MQTT and web server
-#ifdef USE_EMULATION
 #undef USE_EMULATION                          // Disable Wemo or Hue emulation
-#endif
-#ifdef USE_TIMERS
 #undef USE_TIMERS                             // Disable support for up to 16 timers
-#endif
+#undef USE_TIMERS_WEB                         // Disable support for timer webpage
-#ifdef USE_SUNRISE
 #undef USE_SUNRISE                            // Disable support for Sunrise and sunset tools
-#endif
-#ifdef USE_RULES
 #undef USE_RULES                              // Disable support for rules
-#endif
-#ifdef USE_DHT
 #undef USE_DHT                                // Disable internal DHT sensor
-#endif
-#ifdef USE_DS18x20
 #undef USE_DS18x20                            // Disable DS18x20 sensor
-#endif
+#undef USE_DS18x20_LEGACY                     // Disable DS18x20 sensor
-#ifdef USE_DS18B20
 #undef USE_DS18B20                            // Disable internal DS18B20 sensor
-#endif
-#ifdef USE_I2C
 #undef USE_I2C                                // Disable all I2C sensors and devices
-#endif
-#ifdef USE_SPI
 #undef USE_SPI                                // Disable all SPI devices
-#endif
-#ifdef USE_DISPLAY
 #undef USE_DISPLAY                            // Disable Display support
-#endif
-#ifdef USE_MHZ19
 #undef USE_MHZ19                              // Disable support for MH-Z19 CO2 sensor
-#endif
-#ifdef USE_SENSEAIR
 #undef USE_SENSEAIR                           // Disable support for SenseAir K30, K70 and S8 CO2 sensor
-#endif
-#ifdef USE_PMS5003
 #undef USE_PMS5003                            // Disable support for PMS5003 and PMS7003 particle concentration sensor
-#endif
-#ifdef USE_NOVA_SDS
 #undef USE_NOVA_SDS                           // Disable support for SDS011 and SDS021 particle concentration sensor
-#endif
-#ifdef USE_PZEM004T
 #undef USE_PZEM004T                           // Disable PZEM004T energy sensor
-#endif
-#ifdef USE_SERIAL_BRIDGE
 #undef USE_SERIAL_BRIDGE                      // Disable support for software Serial Bridge
-#endif
+#undef USE_SDM120                             // Disable support for Eastron SDM120-Modbus energy meter
-#ifdef USE_IR_REMOTE
+#undef USE_SDM630                             // Disable support for Eastron SDM630-Modbus energy meter
 #undef USE_IR_REMOTE                          // Disable IR driver
-#endif
-#ifdef USE_WS2812
 #undef USE_WS2812                             // Disable WS2812 Led string
-#endif
-#ifdef USE_ARILUX_RF
 #undef USE_ARILUX_RF                          // Disable support for Arilux RF remote controller
-#endif
-#ifdef USE_SR04
 #undef USE_SR04                               // Disable support for for HC-SR04 ultrasonic devices
-#endif
+#undef USE_TM1638                             // Disable support for TM1638 switches copying Switch1 .. Switch8
-#ifdef DEBUG_THEO
+#undef USE_RF_FLASH                           // Disable support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB
 #undef DEBUG_THEO                             // Disable debug code
-#endif
-#ifdef USE_DEBUG_DRIVER
 #undef USE_DEBUG_DRIVER                       // Disable debug code
-#endif
 #endif  // BE_MINIMAL
 
 /*********************************************************************************************\
  * Mandatory defines satisfying possible disabled defines
 \*********************************************************************************************/
 
+#ifndef USE_WPS                               // See https://github.com/esp8266/Arduino/pull/4889
+#undef NO_EXTRA_4K_HEAP                       // Allocate 4k heap for WPS in ESP8166/Arduino core v2.4.2 (was always allocated in previous versions)
+#endif
+
 #ifndef SWITCH_MODE
 #define SWITCH_MODE            TOGGLE         // TOGGLE, FOLLOW or FOLLOW_INV (the wall switch state)
 #endif

sonoff/support.ino

@@ -735,6 +735,12 @@ void GetFeatures()
 #ifdef USE_KNX
   feature_drv1 |= 0x10000000;  // xdrv_11_knx.ino
 #endif
+#ifdef USE_WPS
+  feature_drv1 |= 0x20000000;  // support.ino
+#endif
+#ifdef USE_SMARTCONFIG
+  feature_drv1 |= 0x40000000;  // support.ino
+#endif
 
 /*********************************************************************************************/
 
@@ -954,42 +960,49 @@ boolean WifiWpsConfigDone(void)
 boolean WifiWpsConfigBegin(void)
 {
   wps_result = 99;
-  if (!wifi_wps_disable()) {
+  if (!wifi_wps_disable()) { return false; }
-    return false;
+  if (!wifi_wps_enable(WPS_TYPE_PBC)) { return false; }  // so far only WPS_TYPE_PBC is supported (SDK 2.0.0)
-  }
+  if (!wifi_set_wps_cb((wps_st_cb_t) &WifiWpsStatusCallback)) { return false; }
-  if (!wifi_wps_enable(WPS_TYPE_PBC)) {
+  if (!wifi_wps_start()) { return false; }
-    return false;  // so far only WPS_TYPE_PBC is supported (SDK 2.0.0)
-  }
-  if (!wifi_set_wps_cb((wps_st_cb_t) &WifiWpsStatusCallback)) {
-    return false;
-  }
-  if (!wifi_wps_start()) {
-    return false;
-  }
   return true;
 }
 
 void WifiConfig(uint8_t type)
 {
   if (!wifi_config_type) {
-    if (type >= WIFI_RETRY) {  // WIFI_RETRY and WIFI_WAIT
+    if ((WIFI_RETRY == type) || (WIFI_WAIT == type)) { return; }
-      return;
-    }
 #if defined(USE_WEBSERVER) && defined(USE_EMULATION)
     UdpDisconnect();
 #endif  // USE_EMULATION
-    WiFi.disconnect();        // Solve possible Wifi hangs
+    WiFi.disconnect();                       // Solve possible Wifi hangs
     wifi_config_type = type;
+
+#ifndef USE_WPS
+    if (WIFI_WPSCONFIG == wifi_config_type) { wifi_config_type = WIFI_MANAGER; }
+#endif  // USE_WPS
+#ifndef USE_WEBSERVER
+    if (WIFI_MANAGER == wifi_config_type) { wifi_config_type = WIFI_SMARTCONFIG; }
+#endif  // USE_WEBSERVER
+#ifndef USE_SMARTCONFIG
+    if (WIFI_SMARTCONFIG == wifi_config_type) { wifi_config_type = WIFI_SERIAL; }
+#endif  // USE_SMARTCONFIG
+
     wifi_config_counter = WIFI_CONFIG_SEC;   // Allow up to WIFI_CONFIG_SECS seconds for phone to provide ssid/pswd
     wifi_counter = wifi_config_counter +5;
     blinks = 1999;
     if (WIFI_RESTART == wifi_config_type) {
       restart_flag = 2;
     }
+    else if (WIFI_SERIAL == wifi_config_type) {
+      AddLog_P(LOG_LEVEL_INFO, S_LOG_WIFI, PSTR(D_WCFG_6_SERIAL " " D_ACTIVE_FOR_3_MINUTES));
+    }
+#ifdef USE_SMARTCONFIG
     else if (WIFI_SMARTCONFIG == wifi_config_type) {
       AddLog_P(LOG_LEVEL_INFO, S_LOG_WIFI, PSTR(D_WCFG_1_SMARTCONFIG " " D_ACTIVE_FOR_3_MINUTES));
       WiFi.beginSmartConfig();
     }
+#endif  // USE_SMARTCONFIG
+#ifdef USE_WPS
     else if (WIFI_WPSCONFIG == wifi_config_type) {
       if (WifiWpsConfigBegin()) {
         AddLog_P(LOG_LEVEL_INFO, S_LOG_WIFI, PSTR(D_WCFG_3_WPSCONFIG " " D_ACTIVE_FOR_3_MINUTES));
@@ -998,6 +1011,7 @@ void WifiConfig(uint8_t type)
         wifi_config_counter = 3;
       }
     }
+#endif  // USE_WPS
 #ifdef USE_WEBSERVER
     else if (WIFI_MANAGER == wifi_config_type) {
       AddLog_P(LOG_LEVEL_INFO, S_LOG_WIFI, PSTR(D_WCFG_2_WIFIMANAGER " " D_ACTIVE_FOR_3_MINUTES));
@@ -1023,17 +1037,11 @@ void WifiBegin(uint8_t flag)
   WiFi.disconnect(true);    // Delete SDK wifi config
   delay(200);
   WiFi.mode(WIFI_STA);      // Disable AP mode
-  if (Settings.sleep) {
+#ifndef ARDUINO_ESP8266_RELEASE_2_4_1     // See https://github.com/arendst/Sonoff-Tasmota/issues/2559 - Sleep bug
-#ifndef ARDUINO_ESP8266_RELEASE_2_4_1     // See https://github.com/arendst/Sonoff-Tasmota/issues/2559
+  if (Settings.sleep) { WiFi.setSleepMode(WIFI_LIGHT_SLEEP); }  // Allow light sleep during idle times
-    WiFi.setSleepMode(WIFI_LIGHT_SLEEP);  // Allow light sleep during idle times
 #endif
-  }
+//  if (WiFi.getPhyMode() != WIFI_PHY_MODE_11N) { WiFi.setPhyMode(WIFI_PHY_MODE_11N); }
-//  if (WiFi.getPhyMode() != WIFI_PHY_MODE_11N) {
+  if (!WiFi.getAutoConnect()) { WiFi.setAutoConnect(true); }
-//    WiFi.setPhyMode(WIFI_PHY_MODE_11N);
-//  }
-  if (!WiFi.getAutoConnect()) {
-    WiFi.setAutoConnect(true);
-  }
 //  WiFi.setAutoReconnect(true);
   switch (flag) {
   case 0:  // AP1
@@ -1043,9 +1051,7 @@ void WifiBegin(uint8_t flag)
   case 2:  // Toggle
     Settings.sta_active ^= 1;
   }        // 3: Current AP
-  if (0 == strlen(Settings.sta_ssid[1])) {
+  if ('\0' == Settings.sta_ssid[Settings.sta_active][0]) { Settings.sta_active ^= 1; }  // Skip empty SSID
-    Settings.sta_active = 0;
-  }
   if (Settings.ip_address[0]) {
     WiFi.config(Settings.ip_address[0], Settings.ip_address[1], Settings.ip_address[2], Settings.ip_address[3]);  // Set static IP
   }
@@ -1059,6 +1065,7 @@ void WifiBegin(uint8_t flag)
 void WifiCheckIp()
 {
   if ((WL_CONNECTED == WiFi.status()) && (static_cast<uint32_t>(WiFi.localIP()) != 0)) {
+    global_state.wifi_down = 0;
     wifi_counter = WIFI_CHECK_SEC;
     wifi_retry = wifi_retry_init;
     AddLog_P((wifi_status != WL_CONNECTED) ? LOG_LEVEL_INFO : LOG_LEVEL_DEBUG_MORE, S_LOG_WIFI, PSTR(D_CONNECTED));
@@ -1070,6 +1077,8 @@ void WifiCheckIp()
     }
     wifi_status = WL_CONNECTED;
   } else {
+    global_state.wifi_down = 1;
+    uint8_t wifi_config_tool = Settings.sta_config;
     wifi_status = WiFi.status();
     switch (wifi_status) {
       case WL_CONNECTED:
@@ -1103,7 +1112,12 @@ void WifiCheckIp()
         if (!wifi_retry || ((wifi_retry_init / 2) == wifi_retry)) {
           AddLog_P(LOG_LEVEL_INFO, S_LOG_WIFI, PSTR(D_CONNECT_FAILED_AP_TIMEOUT));
         } else {
-          AddLog_P(LOG_LEVEL_DEBUG, S_LOG_WIFI, PSTR(D_ATTEMPTING_CONNECTION));
+          if (('\0' == Settings.sta_ssid[0][0]) && ('\0' == Settings.sta_ssid[1][0])) {
+            wifi_config_tool = WIFI_CONFIG_NO_SSID;    // Skip empty SSIDs and start Wifi config tool
+            wifi_retry = 0;
+          } else {
+            AddLog_P(LOG_LEVEL_DEBUG, S_LOG_WIFI, PSTR(D_ATTEMPTING_CONNECTION));
+          }
         }
     }
     if (wifi_retry) {
@@ -1116,7 +1130,7 @@ void WifiCheckIp()
       wifi_counter = 1;
       wifi_retry--;
     } else {
-      WifiConfig(Settings.sta_config);
+      WifiConfig(wifi_config_tool);
       wifi_counter = 1;
       wifi_retry = wifi_retry_init;
     }
@@ -1127,6 +1141,7 @@ void WifiCheck(uint8_t param)
 {
   wifi_counter--;
   switch (param) {
+  case WIFI_SERIAL:
   case WIFI_SMARTCONFIG:
   case WIFI_MANAGER:
   case WIFI_WPSCONFIG:
@@ -1137,12 +1152,16 @@ void WifiCheck(uint8_t param)
       wifi_config_counter--;
       wifi_counter = wifi_config_counter +5;
       if (wifi_config_counter) {
+#ifdef USE_SMARTCONFIG
         if ((WIFI_SMARTCONFIG == wifi_config_type) && WiFi.smartConfigDone()) {
           wifi_config_counter = 0;
         }
+#endif  // USE_SMARTCONFIG
+#ifdef USE_WPS
         if ((WIFI_WPSCONFIG == wifi_config_type) && WifiWpsConfigDone()) {
           wifi_config_counter = 0;
         }
+#endif  // USE_WPS
         if (!wifi_config_counter) {
           if (strlen(WiFi.SSID().c_str())) {
             strlcpy(Settings.sta_ssid[0], WiFi.SSID().c_str(), sizeof(Settings.sta_ssid[0]));
@@ -1156,10 +1175,10 @@ void WifiCheck(uint8_t param)
         }
       }
       if (!wifi_config_counter) {
-        if (WIFI_SMARTCONFIG == wifi_config_type) {
+#ifdef USE_SMARTCONFIG
-          WiFi.stopSmartConfig();
+        if (WIFI_SMARTCONFIG == wifi_config_type) { WiFi.stopSmartConfig(); }
-        }
+#endif  // USE_SMARTCONFIG
-        SettingsSdkErase();
+//        SettingsSdkErase();  //  Disabled v6.1.0b due to possible bad wifi connects
         restart_flag = 2;
       }
     } else {
@@ -1169,6 +1188,7 @@ void WifiCheck(uint8_t param)
         WifiCheckIp();
       }
       if ((WL_CONNECTED == WiFi.status()) && (static_cast<uint32_t>(WiFi.localIP()) != 0) && !wifi_config_type) {
+        global_state.wifi_down = 0;
 #ifdef BE_MINIMAL
         if (1 == RtcSettings.ota_loader) {
           RtcSettings.ota_loader = 0;
@@ -1194,9 +1214,7 @@ void WifiCheck(uint8_t param)
           StopWebserver();
         }
 #ifdef USE_EMULATION
-        if (Settings.flag2.emulation) {
+        if (Settings.flag2.emulation) { UdpConnect(); }
-          UdpConnect();
-        }
 #endif  // USE_EMULATION
 #endif  // USE_WEBSERVER
 #ifdef USE_KNX
@@ -1206,6 +1224,7 @@ void WifiCheck(uint8_t param)
         }
 #endif  // USE_KNX
       } else {
+        global_state.wifi_down = 1;
 #if defined(USE_WEBSERVER) && defined(USE_EMULATION)
         UdpDisconnect();
 #endif  // USE_EMULATION
@@ -1225,9 +1244,7 @@ int WifiState()
   if ((WL_CONNECTED == WiFi.status()) && (static_cast<uint32_t>(WiFi.localIP()) != 0)) {
     state = WIFI_RESTART;
   }
-  if (wifi_config_type) {
+  if (wifi_config_type) { state = wifi_config_type; }
-    state = wifi_config_type;
-  }
   return state;
 }
 
@@ -1240,6 +1257,8 @@ void WifiConnect()
   wifi_counter = 1;
 }
 
+/*
+// Enable from 6.0.0a until 6.1.0a - disabled due to possible cause of bad wifi connect on core 2.3.0
 void WifiDisconnect()
 {
   // Courtesy of EspEasy
@@ -1252,10 +1271,17 @@ void WifiDisconnect()
 
 void EspRestart()
 {
-  delay(100);                 // Allow time for message xfer
+  // This results in exception 3 on restarts
+  delay(100);                 // Allow time for message xfer - disabled v6.1.0b
   WifiDisconnect();
   ESP.restart();
 }
+*/
+
+void EspRestart()
+{
+  ESP.restart();
+}
 
 #ifdef USE_DISCOVERY
 /*********************************************************************************************\
@@ -2076,6 +2102,12 @@ void AddLogSerial(byte loglevel)
   AddLogSerial(loglevel, (uint8_t*)serial_in_buffer, serial_in_byte_counter);
 }
 
+void AddLogMissed(char *sensor, uint8_t misses)
+{
+  snprintf_P(log_data, sizeof(log_data), PSTR("SNS: %s missed %d"), sensor, SENSOR_MAX_MISS - misses);
+  AddLog(LOG_LEVEL_DEBUG);
+}
+
 /*********************************************************************************************\
  *
 \*********************************************************************************************/

sonoff/user_config.h

@@ -44,7 +44,7 @@
 \*********************************************************************************************/
 
 // -- Master parameter control --------------------
-#define CFG_HOLDER             4617              // [Reset 1] Change this value to load SECTION1 configuration parameters to flash
+#define CFG_HOLDER             4617              // [Reset 1] Change this value (max 32000) to load SECTION1 configuration parameters to flash
 
 // -- Project -------------------------------------
 #define PROJECT                "sonoff"          // PROJECT is used as the default topic delimiter
@@ -63,8 +63,13 @@
 #define STA_PASS1              ""                // [Password1] Wifi password
 #define STA_SSID2              ""                // [Ssid2] Optional alternate AP Wifi SSID
 #define STA_PASS2              ""                // [Password2] Optional alternate AP Wifi password
-#define WIFI_CONFIG_TOOL       WIFI_WPSCONFIG    // [WifiConfig] Default tool if wifi fails to connect
+#define WIFI_CONFIG_TOOL       WIFI_WAIT         // [WifiConfig] Default tool if wifi fails to connect
-                                                 //   (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT)
+                                                 //   (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL)
+#define WIFI_CONFIG_NO_SSID    WIFI_WPSCONFIG    // Default tool if wifi fails to connect and no SSID is configured
+                                                 //   (WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_SERIAL)
+                                                 //   *** NOTE: When WPS is disabled by USE_WPS below, WIFI_WPSCONFIG will execute WIFI_MANAGER ***
+                                                 //   *** NOTE: When WIFI_MANAGER is disabled by USE_WEBSERVER below, WIFI_MANAGER will execute WIFI_SMARTCONFIG ***
+                                                 //   *** NOTE: When WIFI_SMARTCONFIG is disabled by USE_SMARTCONFIG below, WIFI_SMARTCONFIG will execute WIFI_SERIAL ***
 
 // -- Syslog --------------------------------------
 #define SYS_LOG_HOST           ""                // [LogHost] (Linux) syslog host
@@ -178,8 +183,6 @@
  * - Disable a feature by preceding it with //
 \*********************************************************************************************/
 
-//#define USE_ARDUINO_OTA                          // Add optional support for Arduino OTA (+13k code)
-
 // -- Localization --------------------------------
   // If non selected the default en-GB will be used
 //#define MY_LANGUAGE            bg-BG           // Bulgarian in Bulgaria
@@ -200,6 +203,13 @@
 //#define MY_LANGUAGE            zh-CN           // Chinese (Simplified) in China
 //#define MY_LANGUAGE            zh-TW           // Chinese (Traditional) in Taiwan
 
+// -- Wifi Config tools ---------------------------
+//#define USE_WPS                                  // Add support for WPS as initial wifi configuration tool (+33k code, 1k mem (5k mem with core v2.4.2+))
+//#define USE_SMARTCONFIG                          // Add support for Wifi SmartConfig as initial wifi configuration tool (+23k code, +0.6k mem)
+
+// -- OTA -----------------------------------------
+//#define USE_ARDUINO_OTA                          // Add optional support for Arduino OTA (+13k code)
+
 /*-------------------------------------------------------------------------------------------*\
  * Select ONE of possible three MQTT library types below
 \*-------------------------------------------------------------------------------------------*/
@@ -230,7 +240,7 @@
 //#define USE_KNX                                  // Enable KNX IP Protocol Support (+23k code, +3k3 mem)
 
 // -- HTTP ----------------------------------------
-#define USE_WEBSERVER                            // Enable web server and wifi manager (+66k code, +8k mem)
+#define USE_WEBSERVER                            // Enable web server and Wifi Manager (+66k code, +8k mem)
   #define WEB_PORT             80                // Web server Port for User and Admin mode
   #define WEB_USERNAME         "admin"           // Web server Admin mode user name
   #define USE_EMULATION                          // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
@@ -265,7 +275,7 @@
   #define USE_HTU                                // Add I2C code for HTU21/SI7013/SI7020/SI7021 sensor (+1k5 code)
   #define USE_LM75AD                             // Add I2C code for LM75AD sensor (+0k5 code)
   #define USE_BMP                                // Add I2C code for BMP085/BMP180/BMP280/BME280 sensor (+4k code)
-//    #define USE_BME680                           // Add additional support for BME680 sensor using Adafruit Sensor and BME680 libraries (+6k code)
+//    #define USE_BME680                           // Add additional support for BME680 sensor using Bosch BME680 library (+4k code)
   #define USE_SGP30                              // Add I2C code for SGP30 sensor (+1k1 code)
   #define USE_BH1750                             // Add I2C code for BH1750 sensor (+0k5 code)
 //  #define USE_VEML6070                           // Add I2C code for VEML6070 sensor (+0k5 code)
@@ -277,8 +287,13 @@
 //  #define USE_MGS                                // Add I2C code for Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
     #define MGS_SENSOR_ADDR    0x04              // Default Mutichannel Gas sensor i2c address
 //  #define USE_APDS9960                           // Add I2C code for APDS9960 Proximity Sensor. Disables SHT and VEML6070 (+4k7 code)
+
 // #define USE_MPR121                               // Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons
- 
+
+//  #define USE_MCP230xx                           // Add I2C code for MCP23008/MCP23017 for GP INPUT ONLY providing command Sensor29 for configuration (+2k2 code)
+//    #define USE_MCP230xx_displaymain             // Display pin status on Tasmota main page (+0k2 code)
+//    #define USE_MCP230xx_webconfig               // Enable web config button and form to Tasmota web interface (+2k1 code)
+
 #endif  // USE_I2C
 
 // -- SPI sensors ---------------------------------
@@ -314,9 +329,9 @@
 
 #define USE_SR04                                 // Add support for HC-SR04 ultrasonic devices (+1k code)
 
-//#define USE_TM1638                               // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
+#define USE_TM1638                               // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
 
-#define USE_RF_FLASH                             // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB
+#define USE_RF_FLASH                             // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)
 
 /*********************************************************************************************\
  * Debug features are only supported in development branch

sonoff/xdrv_01_mqtt.ino

@@ -383,6 +383,7 @@ void MqttConnected()
   }
   mqtt_initial_connection_state = 0;
   rules_flag.mqtt_connected = 1;
+  global_state.mqtt_down = 0;
 }
 
 #ifdef USE_MQTT_TLS
@@ -443,6 +444,7 @@ void MqttReconnect()
 
   mqtt_connected = false;
   mqtt_retry_counter = Settings.mqtt_retry;
+  global_state.mqtt_down = 1;
 
 #ifndef USE_MQTT_TLS
 #ifdef USE_DISCOVERY
@@ -512,13 +514,17 @@ void MqttCheck()
 {
   if (Settings.flag.mqtt_enabled) {
     if (!MqttIsConnected()) {
+      global_state.mqtt_down = 1;
       if (!mqtt_retry_counter) {
         MqttReconnect();
       } else {
         mqtt_retry_counter--;
       }
+    } else {
+      global_state.mqtt_down = 0;
     }
   } else {
+    global_state.mqtt_down = 0;
     if (mqtt_initial_connection_state) MqttReconnect();
   }
 }

sonoff/xdrv_02_webserver.ino

@@ -190,6 +190,10 @@ const char HTTP_BTN_RSTRT[] PROGMEM =
   "<br/><form action='rb' method='get' onsubmit='return confirm(\"" D_CONFIRM_RESTART "\");'><button class='button bred'>" D_RESTART "</button></form>";
 const char HTTP_BTN_MENU_MODULE[] PROGMEM =
   "<br/><form action='md' method='get'><button>" D_CONFIGURE_MODULE "</button></form>";
+#if defined(USE_I2C) && defined(USE_MCP230xx) && defined(USE_MCP230xx_webconfig)
+const char HTTP_BTN_MCP230XX[] PROGMEM =
+  "<br/><form action='mc' method='get'><button>" D_CONFIGURE_MCP230XX "</button></form>";
+#endif  // USE_I2C and USE_MCP230xx and USE_MCP230xx_webconfig
 #if defined(USE_TIMERS) && defined(USE_TIMERS_WEB)
 const char HTTP_BTN_MENU_TIMER[] PROGMEM =
   "<br/><form action='tm' method='get'><button>" D_CONFIGURE_TIMER "</button></form>";
@@ -367,8 +371,21 @@ void StartWebserver(int type, IPAddress ipweb)
     if (!WebServer) {
       WebServer = new ESP8266WebServer((HTTP_MANAGER==type) ? 80 : WEB_PORT);
       WebServer->on("/", HandleRoot);
+      WebServer->on("/up", HandleUpgradeFirmware);
+      WebServer->on("/u1", HandleUpgradeFirmwareStart);  // OTA
+      WebServer->on("/u2", HTTP_POST, HandleUploadDone, HandleUploadLoop);
+      WebServer->on("/cs", HandleConsole);
+      WebServer->on("/ax", HandleAjaxConsoleRefresh);
+      WebServer->on("/ay", HandleAjaxStatusRefresh);
+      WebServer->on("/u2", HTTP_OPTIONS, HandlePreflightRequest);
+      WebServer->on("/cm", HandleHttpCommand);
+      WebServer->on("/rb", HandleRestart);
+#ifndef BE_MINIMAL
       WebServer->on("/cn", HandleConfiguration);
       WebServer->on("/md", HandleModuleConfiguration);
+#if defined(USE_I2C) && defined(USE_MCP230xx) && defined(USE_MCP230xx_webconfig)
+      WebServer->on("/mc", HandleMCP230xxConfiguration);
+#endif  // USE_I2C and USE_MCP230xx and USE_MCP230xx_webconfig
 #if defined(USE_TIMERS) && defined(USE_TIMERS_WEB)
       WebServer->on("/tm", HandleTimerConfiguration);
 #endif  // USE_TIMERS and USE_TIMERS_WEB
@@ -389,17 +406,7 @@ void StartWebserver(int type, IPAddress ipweb)
       WebServer->on("/sv", HandleSaveSettings);
       WebServer->on("/rs", HandleRestoreConfiguration);
       WebServer->on("/rt", HandleResetConfiguration);
-      WebServer->on("/up", HandleUpgradeFirmware);
-      WebServer->on("/u1", HandleUpgradeFirmwareStart);  // OTA
-      WebServer->on("/u2", HTTP_POST, HandleUploadDone, HandleUploadLoop);
-      WebServer->on("/u2", HTTP_OPTIONS, HandlePreflightRequest);
-      WebServer->on("/cm", HandleHttpCommand);
-      WebServer->on("/cs", HandleConsole);
-      WebServer->on("/ax", HandleAjaxConsoleRefresh);
-      WebServer->on("/ay", HandleAjaxStatusRefresh);
       WebServer->on("/in", HandleInformation);
-      WebServer->on("/rb", HandleRestart);
-      WebServer->on("/fwlink", HandleRoot);  // Microsoft captive portal. Maybe not needed. Might be handled by notFound handler.
 #ifdef USE_EMULATION
       if (EMUL_WEMO == Settings.flag2.emulation) {
         WebServer->on("/upnp/control/basicevent1", HTTP_POST, HandleUpnpEvent);
@@ -411,6 +418,8 @@ void StartWebserver(int type, IPAddress ipweb)
         WebServer->on("/description.xml", HandleUpnpSetupHue);
       }
 #endif  // USE_EMULATION
+#endif  // Not BE_MINIMAL
+      WebServer->on("/fwlink", HandleRoot);  // Microsoft captive portal. Maybe not needed. Might be handled by notFound handler.
       WebServer->onNotFound(HandleNotFound);
     }
     reset_web_log_flag = 0;
@@ -520,6 +529,7 @@ void HandleRoot()
   if (CaptivePortal()) { return; }  // If captive portal redirect instead of displaying the page.
 
   if (HTTP_MANAGER == webserver_state) {
+#ifndef BE_MINIMAL
     if ((Settings.web_password[0] != 0) && !(WebServer->hasArg("USER1")) && !(WebServer->hasArg("PASS1"))) {
       HandleWifiLogin();
     } else {
@@ -537,6 +547,7 @@ void HandleRoot()
         HandleWifiLogin();
       }
     }
+#endif  // Not BE_MINIMAL
   } else {
     char stemp[10];
     String page = FPSTR(HTTP_HEAD);
@@ -672,6 +683,7 @@ boolean HttpUser()
   return status;
 }
 
+#ifndef BE_MINIMAL
 void HandleConfiguration()
 {
   if (HttpUser()) { return; }
@@ -681,6 +693,11 @@ void HandleConfiguration()
   page.replace(F("{v}"), FPSTR(S_CONFIGURATION));
   page += FPSTR(HTTP_HEAD_STYLE);
   page += FPSTR(HTTP_BTN_MENU_MODULE);
+#if defined(USE_I2C) && defined(USE_MCP230xx) && defined(USE_MCP230xx_webconfig)
+  if (MCP230xx_Type()) {	// Configuration button will only show if MCP23008/MCP23017 was detected on I2C
+    page += FPSTR(HTTP_BTN_MCP230XX);
+  }
+#endif  // USE_I2C and USE_MCP230xx and USE_MCP230xx_webconfig
 #if defined(USE_TIMERS) && defined(USE_TIMERS_WEB)
 #ifdef USE_RULES
   page += FPSTR(HTTP_BTN_MENU_TIMER);
@@ -1119,6 +1136,11 @@ void HandleSaveSettings()
     }
     AddLog(LOG_LEVEL_INFO);
     break;
+#if defined(USE_I2C) && defined(USE_MCP230xx) && defined(USE_MCP230xx_webconfig)
+  case 8:
+    MCP230xx_SaveSettings();
+    break;
+#endif  // USE_I2C and USE_MCP230xx and USE_MCP230xx_webconfig
   case 6:
     WebGetArg("g99", tmp, sizeof(tmp));
     byte new_module = (!strlen(tmp)) ? MODULE : atoi(tmp);
@@ -1205,6 +1227,122 @@ void HandleRestoreConfiguration()
   upload_file_type = UPL_SETTINGS;
 }
 
+void HandleInformation()
+{
+  if (HttpUser()) { return; }
+  AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_INFORMATION);
+
+  char stopic[TOPSZ];
+
+  int freeMem = ESP.getFreeHeap();
+
+  String page = FPSTR(HTTP_HEAD);
+  page.replace(F("{v}"), FPSTR(S_INFORMATION));
+  page += FPSTR(HTTP_HEAD_STYLE);
+  //  page += F("<fieldset><legend><b>&nbsp;Information&nbsp;</b></legend>");
+
+  page += F("<style>td{padding:0px 5px;}</style>");
+  page += F("<div id='i' name='i'></div>");
+
+  // Save 1k of code space replacing table html with javascript replace codes
+  // }1 = </td></tr><tr><th>
+  // }2 = </th><td>
+  String func = FPSTR(HTTP_SCRIPT_INFO_BEGIN);
+  func += F("<table style='width:100%'><tr><th>");
+  func += F(D_PROGRAM_VERSION "}2"); func += my_version;
+  func += F("}1" D_BUILD_DATE_AND_TIME "}2"); func += GetBuildDateAndTime();
+  func += F("}1" D_CORE_AND_SDK_VERSION "}2" ARDUINO_ESP8266_RELEASE "/"); func += String(ESP.getSdkVersion());
+  func += F("}1" D_UPTIME "}2"); func += GetDateAndTime(DT_UPTIME);
+  snprintf_P(stopic, sizeof(stopic), PSTR(" at %X"), GetSettingsAddress());
+  func += F("}1" D_FLASH_WRITE_COUNT "}2"); func += String(Settings.save_flag); func += stopic;
+  func += F("}1" D_BOOT_COUNT "}2"); func += String(Settings.bootcount);
+  func += F("}1" D_RESTART_REASON "}2"); func += GetResetReason();
+  uint8_t maxfn = (devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : devices_present;
+  if (SONOFF_IFAN02 == Settings.module) { maxfn = 1; }
+  for (byte i = 0; i < maxfn; i++) {
+    func += F("}1" D_FRIENDLY_NAME " "); func += i +1; func += F("}2"); func += Settings.friendlyname[i];
+  }
+
+  func += F("}1}2&nbsp;");  // Empty line
+  func += F("}1" D_AP); func += String(Settings.sta_active +1);
+    func += F(" " D_SSID " (" D_RSSI ")}2"); func += Settings.sta_ssid[Settings.sta_active]; func += F(" ("); func += WifiGetRssiAsQuality(WiFi.RSSI()); func += F("%)");
+  func += F("}1" D_HOSTNAME "}2"); func += my_hostname;
+  if (static_cast<uint32_t>(WiFi.localIP()) != 0) {
+    func += F("}1" D_IP_ADDRESS "}2"); func += WiFi.localIP().toString();
+    func += F("}1" D_GATEWAY "}2"); func += IPAddress(Settings.ip_address[1]).toString();
+    func += F("}1" D_SUBNET_MASK "}2"); func += IPAddress(Settings.ip_address[2]).toString();
+    func += F("}1" D_DNS_SERVER "}2"); func += IPAddress(Settings.ip_address[3]).toString();
+    func += F("}1" D_MAC_ADDRESS "}2"); func += WiFi.macAddress();
+  }
+  if (static_cast<uint32_t>(WiFi.softAPIP()) != 0) {
+    func += F("}1" D_AP " " D_IP_ADDRESS "}2"); func += WiFi.softAPIP().toString();
+    func += F("}1" D_AP " " D_GATEWAY "}2"); func += WiFi.softAPIP().toString();
+    func += F("}1" D_AP " " D_MAC_ADDRESS "}2"); func += WiFi.softAPmacAddress();
+  }
+
+  func += F("}1}2&nbsp;");  // Empty line
+  if (Settings.flag.mqtt_enabled) {
+    func += F("}1" D_MQTT_HOST "}2"); func += Settings.mqtt_host;
+    func += F("}1" D_MQTT_PORT "}2"); func += String(Settings.mqtt_port);
+    func += F("}1" D_MQTT_CLIENT " &<br/>&nbsp;" D_FALLBACK_TOPIC "}2"); func += mqtt_client;
+    func += F("}1" D_MQTT_USER "}2"); func += Settings.mqtt_user;
+    func += F("}1" D_MQTT_TOPIC "}2"); func += Settings.mqtt_topic;
+    func += F("}1" D_MQTT_GROUP_TOPIC "}2"); func += Settings.mqtt_grptopic;
+    GetTopic_P(stopic, CMND, mqtt_topic, "");
+    func += F("}1" D_MQTT_FULL_TOPIC "}2"); func += stopic;
+
+  } else {
+    func += F("}1" D_MQTT "}2" D_DISABLED);
+  }
+
+  func += F("}1}2&nbsp;");  // Empty line
+  func += F("}1" D_EMULATION "}2");
+#ifdef USE_EMULATION
+  if (EMUL_WEMO == Settings.flag2.emulation) {
+    func += F(D_BELKIN_WEMO);
+  }
+  else if (EMUL_HUE == Settings.flag2.emulation) {
+    func += F(D_HUE_BRIDGE);
+  }
+  else {
+    func += F(D_NONE);
+  }
+#else
+  func += F(D_DISABLED);
+#endif // USE_EMULATION
+
+  func += F("}1" D_MDNS_DISCOVERY "}2");
+#ifdef USE_DISCOVERY
+  func += F(D_ENABLED);
+  func += F("}1" D_MDNS_ADVERTISE "}2");
+#ifdef WEBSERVER_ADVERTISE
+  func += F(D_WEB_SERVER);
+#else
+  func += F(D_DISABLED);
+#endif // WEBSERVER_ADVERTISE
+#else
+  func += F(D_DISABLED);
+#endif // USE_DISCOVERY
+
+  func += F("}1}2&nbsp;");  // Empty line
+  func += F("}1" D_ESP_CHIP_ID "}2"); func += String(ESP.getChipId());
+  func += F("}1" D_FLASH_CHIP_ID "}2"); func += String(ESP.getFlashChipId());
+  func += F("}1" D_FLASH_CHIP_SIZE "}2"); func += String(ESP.getFlashChipRealSize() / 1024); func += F("kB");
+  func += F("}1" D_PROGRAM_FLASH_SIZE "}2"); func += String(ESP.getFlashChipSize() / 1024); func += F("kB");
+  func += F("}1" D_PROGRAM_SIZE "}2"); func += String(ESP.getSketchSize() / 1024); func += F("kB");
+  func += F("}1" D_FREE_PROGRAM_SPACE "}2"); func += String(ESP.getFreeSketchSpace() / 1024); func += F("kB");
+  func += F("}1" D_FREE_MEMORY "}2"); func += String(freeMem / 1024); func += F("kB");
+  func += F("</td></tr></table>");
+  func += FPSTR(HTTP_SCRIPT_INFO_END);
+  page.replace(F("</script>"), func);
+  page.replace(F("<body>"), F("<body onload='i()'>"));
+
+  //  page += F("</fieldset>");
+  page += FPSTR(HTTP_BTN_MAIN);
+  ShowPage(page);
+}
+#endif  // Not BE_MINIMAL
+
 void HandleUpgradeFirmware()
 {
   if (HttpUser()) { return; }
@@ -1629,121 +1767,6 @@ void HandleAjaxConsoleRefresh()
   WebServer->send(200, FPSTR(HDR_CTYPE_XML), message);
 }
 
-void HandleInformation()
-{
-  if (HttpUser()) { return; }
-  AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_INFORMATION);
-
-  char stopic[TOPSZ];
-
-  int freeMem = ESP.getFreeHeap();
-
-  String page = FPSTR(HTTP_HEAD);
-  page.replace(F("{v}"), FPSTR(S_INFORMATION));
-  page += FPSTR(HTTP_HEAD_STYLE);
-  //  page += F("<fieldset><legend><b>&nbsp;Information&nbsp;</b></legend>");
-
-  page += F("<style>td{padding:0px 5px;}</style>");
-  page += F("<div id='i' name='i'></div>");
-
-  // Save 1k of code space replacing table html with javascript replace codes
-  // }1 = </td></tr><tr><th>
-  // }2 = </th><td>
-  String func = FPSTR(HTTP_SCRIPT_INFO_BEGIN);
-  func += F("<table style='width:100%'><tr><th>");
-  func += F(D_PROGRAM_VERSION "}2"); func += my_version;
-  func += F("}1" D_BUILD_DATE_AND_TIME "}2"); func += GetBuildDateAndTime();
-  func += F("}1" D_CORE_AND_SDK_VERSION "}2" ARDUINO_ESP8266_RELEASE "/"); func += String(ESP.getSdkVersion());
-  func += F("}1" D_UPTIME "}2"); func += GetDateAndTime(DT_UPTIME);
-  snprintf_P(stopic, sizeof(stopic), PSTR(" at %X"), GetSettingsAddress());
-  func += F("}1" D_FLASH_WRITE_COUNT "}2"); func += String(Settings.save_flag); func += stopic;
-  func += F("}1" D_BOOT_COUNT "}2"); func += String(Settings.bootcount);
-  func += F("}1" D_RESTART_REASON "}2"); func += GetResetReason();
-  uint8_t maxfn = (devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : devices_present;
-  if (SONOFF_IFAN02 == Settings.module) { maxfn = 1; }
-  for (byte i = 0; i < maxfn; i++) {
-    func += F("}1" D_FRIENDLY_NAME " "); func += i +1; func += F("}2"); func += Settings.friendlyname[i];
-  }
-
-  func += F("}1}2&nbsp;");  // Empty line
-  func += F("}1" D_AP); func += String(Settings.sta_active +1);
-    func += F(" " D_SSID " (" D_RSSI ")}2"); func += Settings.sta_ssid[Settings.sta_active]; func += F(" ("); func += WifiGetRssiAsQuality(WiFi.RSSI()); func += F("%)");
-  func += F("}1" D_HOSTNAME "}2"); func += my_hostname;
-  if (static_cast<uint32_t>(WiFi.localIP()) != 0) {
-    func += F("}1" D_IP_ADDRESS "}2"); func += WiFi.localIP().toString();
-    func += F("}1" D_GATEWAY "}2"); func += IPAddress(Settings.ip_address[1]).toString();
-    func += F("}1" D_SUBNET_MASK "}2"); func += IPAddress(Settings.ip_address[2]).toString();
-    func += F("}1" D_DNS_SERVER "}2"); func += IPAddress(Settings.ip_address[3]).toString();
-    func += F("}1" D_MAC_ADDRESS "}2"); func += WiFi.macAddress();
-  }
-  if (static_cast<uint32_t>(WiFi.softAPIP()) != 0) {
-    func += F("}1" D_AP " " D_IP_ADDRESS "}2"); func += WiFi.softAPIP().toString();
-    func += F("}1" D_AP " " D_GATEWAY "}2"); func += WiFi.softAPIP().toString();
-    func += F("}1" D_AP " " D_MAC_ADDRESS "}2"); func += WiFi.softAPmacAddress();
-  }
-
-  func += F("}1}2&nbsp;");  // Empty line
-  if (Settings.flag.mqtt_enabled) {
-    func += F("}1" D_MQTT_HOST "}2"); func += Settings.mqtt_host;
-    func += F("}1" D_MQTT_PORT "}2"); func += String(Settings.mqtt_port);
-    func += F("}1" D_MQTT_CLIENT " &<br/>&nbsp;" D_FALLBACK_TOPIC "}2"); func += mqtt_client;
-    func += F("}1" D_MQTT_USER "}2"); func += Settings.mqtt_user;
-    func += F("}1" D_MQTT_TOPIC "}2"); func += Settings.mqtt_topic;
-    func += F("}1" D_MQTT_GROUP_TOPIC "}2"); func += Settings.mqtt_grptopic;
-    GetTopic_P(stopic, CMND, mqtt_topic, "");
-    func += F("}1" D_MQTT_FULL_TOPIC "}2"); func += stopic;
-
-  } else {
-    func += F("}1" D_MQTT "}2" D_DISABLED);
-  }
-
-  func += F("}1}2&nbsp;");  // Empty line
-  func += F("}1" D_EMULATION "}2");
-#ifdef USE_EMULATION
-  if (EMUL_WEMO == Settings.flag2.emulation) {
-    func += F(D_BELKIN_WEMO);
-  }
-  else if (EMUL_HUE == Settings.flag2.emulation) {
-    func += F(D_HUE_BRIDGE);
-  }
-  else {
-    func += F(D_NONE);
-  }
-#else
-  func += F(D_DISABLED);
-#endif // USE_EMULATION
-
-  func += F("}1" D_MDNS_DISCOVERY "}2");
-#ifdef USE_DISCOVERY
-  func += F(D_ENABLED);
-  func += F("}1" D_MDNS_ADVERTISE "}2");
-#ifdef WEBSERVER_ADVERTISE
-  func += F(D_WEB_SERVER);
-#else
-  func += F(D_DISABLED);
-#endif // WEBSERVER_ADVERTISE
-#else
-  func += F(D_DISABLED);
-#endif // USE_DISCOVERY
-
-  func += F("}1}2&nbsp;");  // Empty line
-  func += F("}1" D_ESP_CHIP_ID "}2"); func += String(ESP.getChipId());
-  func += F("}1" D_FLASH_CHIP_ID "}2"); func += String(ESP.getFlashChipId());
-  func += F("}1" D_FLASH_CHIP_SIZE "}2"); func += String(ESP.getFlashChipRealSize() / 1024); func += F("kB");
-  func += F("}1" D_PROGRAM_FLASH_SIZE "}2"); func += String(ESP.getFlashChipSize() / 1024); func += F("kB");
-  func += F("}1" D_PROGRAM_SIZE "}2"); func += String(ESP.getSketchSize() / 1024); func += F("kB");
-  func += F("}1" D_FREE_PROGRAM_SPACE "}2"); func += String(ESP.getFreeSketchSpace() / 1024); func += F("kB");
-  func += F("}1" D_FREE_MEMORY "}2"); func += String(freeMem / 1024); func += F("kB");
-  func += F("</td></tr></table>");
-  func += FPSTR(HTTP_SCRIPT_INFO_END);
-  page.replace(F("</script>"), func);
-  page.replace(F("<body>"), F("<body onload='i()'>"));
-
-  //  page += F("</fieldset>");
-  page += FPSTR(HTTP_BTN_MAIN);
-  ShowPage(page);
-}
-
 void HandleRestart()
 {
   if (HttpUser()) { return; }

sonoff/xdrv_03_energy.ino

@@ -17,8 +17,6 @@
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#define USE_ENERGY_SENSOR
-
 #ifdef USE_ENERGY_SENSOR
 /*********************************************************************************************\
  * HLW8012 and PZEM004T - Energy
@@ -93,18 +91,18 @@ void EnergyUpdateToday()
 }
 
 /*********************************************************************************************\
- * HLW8012, BL0937 or HJL-01 - Energy (Sonoff Pow)
+ * HLW8012, BL0937 or HJL-01 - Energy (Sonoff Pow, HuaFan, KMC70011, BlitzWolf)
  *
  * Based on Source: Shenzhen Heli Technology Co., Ltd
 \*********************************************************************************************/
 
-// HLW8012 based (Sonoff Pow, KMC70011)
+// HLW8012 based (Sonoff Pow, KMC70011, HuaFan)
 #define HLW_PREF            10000    // 1000.0W
 #define HLW_UREF             2200    // 220.0V
 #define HLW_IREF             4545    // 4.545A
 #define HLW_SEL_VOLTAGE         1
 
-// HJL-01 based (Homecube, BlitzWolf)
+// HJL-01 based (BlitzWolf, Homecube, Gosund)
 #define HJL_PREF             1362
 #define HJL_UREF              822
 #define HJL_IREF             3300

sonoff/xdrv_07_domoticz.ino

@@ -271,14 +271,17 @@ boolean DomoticzCommand()
 
 boolean DomoticzSendKey(byte key, byte device, byte state, byte svalflg)
 {
-  if ((Settings.domoticz_key_idx[device -1] || Settings.domoticz_switch_idx[device -1]) && (svalflg)) {
+  boolean result = 0;
-    snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"command\":\"switchlight\",\"idx\":%d,\"switchcmd\":\"%s\"}"),
+
-      (key) ? Settings.domoticz_switch_idx[device -1] : Settings.domoticz_key_idx[device -1], (state) ? (2 == state) ? "Toggle" : "On" : "Off");
+  if (device <= MAX_DOMOTICZ_IDX) {
-    MqttPublish(domoticz_in_topic);
+    if ((Settings.domoticz_key_idx[device -1] || Settings.domoticz_switch_idx[device -1]) && (svalflg)) {
-    return 1;
+      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"command\":\"switchlight\",\"idx\":%d,\"switchcmd\":\"%s\"}"),
-  } else {
+        (key) ? Settings.domoticz_switch_idx[device -1] : Settings.domoticz_key_idx[device -1], (state) ? (2 == state) ? "Toggle" : "On" : "Off");
-    return 0;
+      MqttPublish(domoticz_in_topic);
+      result = 1;
+    }
   }
+  return result;
 }
 
 /*********************************************************************************************\

sonoff/xdrv_10_rules.ino

@@ -253,7 +253,7 @@ bool RulesRuleMatch(byte rule_set, String &event, String &rule)
     }
   } else match = true;
 
-  if (Settings.flag.rules_once) {
+  if (bitRead(Settings.rule_once, rule_set)) {
     if (match) {                                       // Only allow match state changes
       if (!bitRead(rules_triggers[rule_set], rules_trigger_count[rule_set])) {
         bitSet(rules_triggers[rule_set], rules_trigger_count[rule_set]);
@@ -557,44 +557,38 @@ boolean RulesCommand()
     snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, Settings.mems[index -1]);
   }
   else if ((CMND_ADD == command_code) && (index > 0) && (index <= RULES_MAX_VARS)) {
-    if ( XdrvMailbox.data_len > 0 ) {
+    if (XdrvMailbox.data_len > 0) {
       double tempvar = CharToDouble(vars[index -1]) + CharToDouble(XdrvMailbox.data);
-      dtostrfd(tempvar,2,vars[index -1]);
+      dtostrfd(tempvar, 2, vars[index -1]);
     }
     snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, vars[index -1]);
   }
   else if ((CMND_SUB == command_code) && (index > 0) && (index <= RULES_MAX_VARS)) {
-    if ( XdrvMailbox.data_len > 0 ){
+    if (XdrvMailbox.data_len > 0) {
       double tempvar = CharToDouble(vars[index -1]) - CharToDouble(XdrvMailbox.data);
-      dtostrfd(tempvar,2,vars[index -1]);
+      dtostrfd(tempvar, 2, vars[index -1]);
     }
     snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, vars[index -1]);
   }
   else if ((CMND_MULT == command_code) && (index > 0) && (index <= RULES_MAX_VARS)) {
-    if ( XdrvMailbox.data_len > 0 ){
+    if (XdrvMailbox.data_len > 0) {
       double tempvar = CharToDouble(vars[index -1]) * CharToDouble(XdrvMailbox.data);
-      dtostrfd(tempvar,2,vars[index -1]);
+      dtostrfd(tempvar, 2, vars[index -1]);
     }
     snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, vars[index -1]);
   }
   else if ((CMND_SCALE == command_code) && (index > 0) && (index <= RULES_MAX_VARS)) {
-    if ( XdrvMailbox.data_len > 0 ) {
+    if (XdrvMailbox.data_len > 0) {
       if (strstr(XdrvMailbox.data, ",")) {     // Process parameter entry
-        double value = 0;
+        char sub_string[XdrvMailbox.data_len +1];
-        double valueIN = 0;
-        double fromLow = 0;
-        double fromHigh = 0;
-        double toLow = 0;
-        double toHigh = 0;
 
-        valueIN = CharToDouble(subStr(XdrvMailbox.data, ",", 1));
+        double valueIN = CharToDouble(subStr(sub_string, XdrvMailbox.data, ",", 1));
-        fromLow = CharToDouble(subStr(XdrvMailbox.data, ",", 2));
+        double fromLow = CharToDouble(subStr(sub_string, XdrvMailbox.data, ",", 2));
-        fromHigh = CharToDouble(subStr(XdrvMailbox.data, ",", 3));
+        double fromHigh = CharToDouble(subStr(sub_string, XdrvMailbox.data, ",", 3));
-        toLow = CharToDouble(subStr(XdrvMailbox.data, ",", 4));
+        double toLow = CharToDouble(subStr(sub_string, XdrvMailbox.data, ",", 4));
-        toHigh = CharToDouble(subStr(XdrvMailbox.data, ",", 5));
+        double toHigh = CharToDouble(subStr(sub_string, XdrvMailbox.data, ",", 5));
-
+        double value = map_double(valueIN, fromLow, fromHigh, toLow, toHigh);
-        value = map_double(valueIN, fromLow, fromHigh, toLow, toHigh);
+        dtostrfd(value, 2, vars[index -1]);
-        dtostrfd(value,2,vars[index -1]);
       }
     }
     snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, vars[index -1]);
@@ -610,24 +604,23 @@ double map_double(double x, double in_min, double in_max, double out_min, double
 }
 
 // Function to return a substring defined by a delimiter at an index
-char* subStr (char* str, const char *delim, int index) {
+char* subStr(char* dest, char* str, const char *delim, int index)
-  char *act, *sub, *ptr;
+{
-  static char copy[10];
+  char *act;
+  char *sub;
+  char *ptr;
   int i;
 
   // Since strtok consumes the first arg, make a copy
-  strcpy(copy, str);
+  strncpy(dest, str, strlen(str));
-
+  for (i = 1, act = dest; i <= index; i++, act = NULL) {
-  for (i = 1, act = copy; i <= index; i++, act = NULL) {
+    sub = strtok_r(act, delim, &ptr);
-     sub = strtok_r(act, delim, &ptr);
+    if (sub == NULL) break;
-     if (sub == NULL) break;
   }
-  sub = LTrim(sub);
+  sub = Trim(sub);
-  sub = RTrim(sub);
   return sub;
 }
 
-
 /*********************************************************************************************\
  * Interface
 \*********************************************************************************************/

sonoff/xplg_ws2812.ino

@@ -126,7 +126,6 @@ int mod(int a, int b)
    return ret;
 }
 
-#define cmin(a,b) ((a)<(b)?(a):(b))
 
 void Ws2812UpdatePixelColor(int position, struct WsColor hand_color, float offset)
 {
@@ -140,9 +139,9 @@ void Ws2812UpdatePixelColor(int position, struct WsColor hand_color, float offse
 
   color = strip->GetPixelColor(mod_position);
   float dimmer = 100 / (float)Settings.light_dimmer;
-  color.R = cmin(color.R + ((hand_color.red / dimmer) * offset), 255);
+  color.R = tmin(color.R + ((hand_color.red / dimmer) * offset), 255);
-  color.G = cmin(color.G + ((hand_color.green / dimmer) * offset), 255);
+  color.G = tmin(color.G + ((hand_color.green / dimmer) * offset), 255);
-  color.B = cmin(color.B + ((hand_color.blue / dimmer) * offset), 255);
+  color.B = tmin(color.B + ((hand_color.blue / dimmer) * offset), 255);
   strip->SetPixelColor(mod_position, color);
 }
 

sonoff/xsns_05_ds18b20.ino

@@ -26,9 +26,10 @@
 #define W1_CONVERT_TEMP      0x44
 #define W1_READ_SCRATCHPAD   0xBE
 
-float ds18b20_last_temperature = 0;
+float ds18b20_temperature = 0;
-uint16_t ds18b20_last_result = 0;
+uint8_t ds18b20_valid = 0;
 uint8_t ds18x20_pin = 0;
+char ds18b20_types[] = "DS18B20";
 
 /*********************************************************************************************\
  * Embedded stripped and tuned OneWire library
@@ -126,12 +127,7 @@ boolean OneWireCrc8(uint8_t *addr)
 
 /********************************************************************************************/
 
-void Ds18x20Init()
+void Ds18b20Convert()
-{
-  ds18x20_pin = pin[GPIO_DSB];
-}
-
-void Ds18x20Convert()
 {
   OneWireReset();
   OneWireWrite(W1_SKIP_ROM);           // Address all Sensors on Bus
@@ -139,25 +135,16 @@ void Ds18x20Convert()
 //  delay(750);                          // 750ms should be enough for 12bit conv
 }
 
-boolean Ds18b20Read(float &t)
+boolean Ds18b20Read()
 {
   uint8_t data[9];
   int8_t sign = 1;
 
-  if (!ds18b20_last_temperature) {
+  if (ds18b20_valid) { ds18b20_valid--; }
-    t = NAN;
-  } else {
-    ds18b20_last_result++;
-    if (ds18b20_last_result > 4) {     // Reset after 4 misses
-      ds18b20_last_temperature = NAN;
-    }
-    t = ds18b20_last_temperature;
-  }
-
 /*
-  if (!OneWireReadBit()) {             //check measurement end
+  if (!OneWireReadBit()) {     // Check end of measurement
     AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_BUSY));
-    return !isnan(t);
+    return;
   }
 */
   for (uint8_t retry = 0; retry < 3; retry++) {
@@ -173,44 +160,55 @@ boolean Ds18b20Read(float &t)
         temp12 = (~temp12) +1;
         sign = -1;
       }
-      t = ConvertTemp(sign * temp12 * 0.0625);
+      ds18b20_temperature = ConvertTemp(sign * temp12 * 0.0625);
-      ds18b20_last_result = 0;
+      ds18b20_valid = SENSOR_MAX_MISS;
-    }
-    if (!isnan(t)) {
-      ds18b20_last_temperature = t;
       return true;
     }
   }
   AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_CRC_ERROR));
-  return !isnan(t);
+  return false;
+}
+
+/********************************************************************************************/
+
+void Ds18b20EverySecond()
+{
+  ds18x20_pin = pin[GPIO_DSB];
+  if (uptime &1) {
+    // 2mS
+    Ds18b20Convert();          // Start conversion, takes up to one second
+  } else {
+    // 12mS
+    if (!Ds18b20Read()) {      // Read temperature
+      AddLogMissed(ds18b20_types, ds18b20_valid);
+    }
+  }
 }
 
 void Ds18b20Show(boolean json)
 {
-  float t;
+  if (ds18b20_valid) {        // Check for valid temperature
-
-  if (Ds18b20Read(t)) {                // Check if read failed
     char temperature[10];
 
-    dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
+    dtostrfd(ds18b20_temperature, Settings.flag2.temperature_resolution, temperature);
-
     if(json) {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"DS18B20\":{\"" D_JSON_TEMPERATURE "\":%s}"), mqtt_data, temperature);
+      snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMP, mqtt_data, ds18b20_types, temperature);
 #ifdef USE_DOMOTICZ
-      if (0 == tele_period) DomoticzSensor(DZ_TEMP, temperature);
+      if (0 == tele_period) {
+        DomoticzSensor(DZ_TEMP, temperature);
+      }
 #endif  // USE_DOMOTICZ
 #ifdef USE_KNX
       if (0 == tele_period) {
-        KnxSensor(KNX_TEMPERATURE, t);
+        KnxSensor(KNX_TEMPERATURE, ds18b20_temperature);
       }
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
     } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "DS18B20", temperature, TempUnit());
+      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, ds18b20_types, temperature, TempUnit());
 #endif  // USE_WEBSERVER
     }
   }
-  Ds18x20Convert();   // Start conversion, takes up to one second
 }
 
 /*********************************************************************************************\
@@ -225,11 +223,8 @@ boolean Xsns05(byte function)
 
   if (pin[GPIO_DSB] < 99) {
     switch (function) {
-      case FUNC_INIT:
+      case FUNC_EVERY_SECOND:
-        Ds18x20Init();
+        Ds18b20EverySecond();
-        break;
-      case FUNC_PREP_BEFORE_TELEPERIOD:
-        Ds18x20Convert();   // Start conversion, takes up to one second
         break;
       case FUNC_JSON_APPEND:
         Ds18b20Show(1);

sonoff/xsns_05_ds18x20.ino

@@ -21,6 +21,7 @@
 /*********************************************************************************************\
  * DS18B20 - Temperature - Multiple sensors
 \*********************************************************************************************/
+//#define USE_DS18x20_RECONFIGURE    // When sensor is lost keep retrying or re-configure
 
 #define DS18S20_CHIPID       0x10  // +/-0.5C 9-bit
 #define DS1822_CHIPID        0x22  // +/-2C 12-bit
@@ -38,11 +39,16 @@
 const char kDs18x20Types[] PROGMEM = "DS18x20|DS18S20|DS1822|DS18B20|MAX31850";
 
 uint8_t ds18x20_chipids[] = { 0, DS18S20_CHIPID, DS1822_CHIPID, DS18B20_CHIPID, MAX31850_CHIPID };
-uint8_t ds18x20_address[DS18X20_MAX_SENSORS][8];
+
-uint8_t ds18x20_index[DS18X20_MAX_SENSORS] = { 0 };
+struct DS18X20STRUCT {
+  uint8_t address[8];
+  uint8_t index;
+  uint8_t valid;
+  float   temperature;
+} ds18x20_sensor[DS18X20_MAX_SENSORS];
 uint8_t ds18x20_sensors = 0;
 uint8_t ds18x20_pin = 0;
-char ds18x20_types[9];
+char ds18x20_types[12];
 
 /*********************************************************************************************\
  * Embedded tuned OneWire library
@@ -246,28 +252,29 @@ void Ds18x20Init()
   uint64_t ids[DS18X20_MAX_SENSORS];
 
   ds18x20_pin = pin[GPIO_DSB];
+
   OneWireResetSearch();
   for (ds18x20_sensors = 0; ds18x20_sensors < DS18X20_MAX_SENSORS; ds18x20_sensors) {
-    if (!OneWireSearch(ds18x20_address[ds18x20_sensors])) {
+    if (!OneWireSearch(ds18x20_sensor[ds18x20_sensors].address)) {
       break;
     }
-    if (OneWireCrc8(ds18x20_address[ds18x20_sensors]) &&
+    if (OneWireCrc8(ds18x20_sensor[ds18x20_sensors].address) &&
-       ((ds18x20_address[ds18x20_sensors][0] == DS18S20_CHIPID) ||
+       ((ds18x20_sensor[ds18x20_sensors].address[0] == DS18S20_CHIPID) ||
-        (ds18x20_address[ds18x20_sensors][0] == DS1822_CHIPID) ||
+        (ds18x20_sensor[ds18x20_sensors].address[0] == DS1822_CHIPID) ||
-        (ds18x20_address[ds18x20_sensors][0] == DS18B20_CHIPID) ||
+        (ds18x20_sensor[ds18x20_sensors].address[0] == DS18B20_CHIPID) ||
-        (ds18x20_address[ds18x20_sensors][0] == MAX31850_CHIPID))) {
+        (ds18x20_sensor[ds18x20_sensors].address[0] == MAX31850_CHIPID))) {
-      ds18x20_index[ds18x20_sensors] = ds18x20_sensors;
+      ds18x20_sensor[ds18x20_sensors].index = ds18x20_sensors;
-      ids[ds18x20_sensors] = ds18x20_address[ds18x20_sensors][0];  // Chip id
+      ids[ds18x20_sensors] = ds18x20_sensor[ds18x20_sensors].address[0];  // Chip id
       for (uint8_t j = 6; j > 0; j--) {
-        ids[ds18x20_sensors] = ids[ds18x20_sensors] << 8 | ds18x20_address[ds18x20_sensors][j];
+        ids[ds18x20_sensors] = ids[ds18x20_sensors] << 8 | ds18x20_sensor[ds18x20_sensors].address[j];
       }
       ds18x20_sensors++;
     }
   }
   for (uint8_t i = 0; i < ds18x20_sensors; i++) {
     for (uint8_t j = i + 1; j < ds18x20_sensors; j++) {
-      if (ids[ds18x20_index[i]] > ids[ds18x20_index[j]]) {  // Sort ascending
+      if (ids[ds18x20_sensor[i].index] > ids[ds18x20_sensor[j].index]) {  // Sort ascending
-        std::swap(ds18x20_index[i], ds18x20_index[j]);
+        std::swap(ds18x20_sensor[i].index, ds18x20_sensor[j].index);
       }
     }
   }
@@ -283,7 +290,7 @@ void Ds18x20Convert()
 //  delay(750);                          // 750ms should be enough for 12bit conv
 }
 
-boolean Ds18x20Read(uint8_t sensor, float &t)
+bool Ds18x20Read(uint8_t sensor)
 {
   uint8_t data[9];
   int8_t sign = 1;
@@ -291,17 +298,17 @@ boolean Ds18x20Read(uint8_t sensor, float &t)
   int16_t temp14 = 0;
   float temp9 = 0.0;
 
-  t = NAN;
+  uint8_t index = ds18x20_sensor[sensor].index;
-
+  if (ds18x20_sensor[index].valid) { ds18x20_sensor[index].valid--; }
   for (uint8_t retry = 0; retry < 3; retry++) {
     OneWireReset();
-    OneWireSelect(ds18x20_address[ds18x20_index[sensor]]);
+    OneWireSelect(ds18x20_sensor[index].address);
     OneWireWrite(W1_READ_SCRATCHPAD);
     for (uint8_t i = 0; i < 9; i++) {
       data[i] = OneWireRead();
     }
     if (OneWireCrc8(data)) {
-      switch(ds18x20_address[ds18x20_index[sensor]][0]) {
+      switch(ds18x20_sensor[index].address[0]) {
       case DS18S20_CHIPID:
         if (data[1] > 0x80) {
           data[0] = (~data[0]) +1;
@@ -312,19 +319,20 @@ boolean Ds18x20Read(uint8_t sensor, float &t)
         } else {
           temp9 = (data[0] >> 1) * sign;
         }
-        t = ConvertTemp((temp9 - 0.25) + ((16.0 - data[6]) / 16.0));
+        ds18x20_sensor[index].temperature = ConvertTemp((temp9 - 0.25) + ((16.0 - data[6]) / 16.0));
-        break;
+        ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
+        return true;
       case DS1822_CHIPID:
       case DS18B20_CHIPID:
         if (data[4] != 0x7F) {
           data[4] = 0x7F;                 // Set resolution to 12-bit
           OneWireReset();
-          OneWireSelect(ds18x20_address[ds18x20_index[sensor]]);
+          OneWireSelect(ds18x20_sensor[index].address);
           OneWireWrite(W1_WRITE_SCRATCHPAD);
           OneWireWrite(data[2]);          // Th Register
           OneWireWrite(data[3]);          // Tl Register
           OneWireWrite(data[4]);          // Configuration Register
-          OneWireSelect(ds18x20_address[ds18x20_index[sensor]]);
+          OneWireSelect(ds18x20_sensor[index].address);
           OneWireWrite(W1_WRITE_EEPROM);  // Save scratchpad to EEPROM
         }
         temp12 = (data[1] << 8) + data[0];
@@ -332,72 +340,99 @@ boolean Ds18x20Read(uint8_t sensor, float &t)
           temp12 = (~temp12) +1;
           sign = -1;
         }
-        t = ConvertTemp(sign * temp12 * 0.0625);  // Divide by 16
+        ds18x20_sensor[index].temperature = ConvertTemp(sign * temp12 * 0.0625);  // Divide by 16
-        break;
+        ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
+        return true;
       case MAX31850_CHIPID:
         temp14 = (data[1] << 8) + (data[0] & 0xFC);
-        t = ConvertTemp(temp14 * 0.0625);  // Divide by 16
+        ds18x20_sensor[index].temperature = ConvertTemp(temp14 * 0.0625);  // Divide by 16
-        break;
+        ds18x20_sensor[index].valid = SENSOR_MAX_MISS;
+        return true;
       }
     }
-    if (!isnan(t)) {
-      return true;
-    }
   }
   AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DSB D_SENSOR_CRC_ERROR));
   return false;
 }
 
+void Ds18x20Name(uint8_t sensor)
+{
+  uint8_t index = sizeof(ds18x20_chipids);
+  while (index) {
+    if (ds18x20_sensor[ds18x20_sensor[sensor].index].address[0] == ds18x20_chipids[index]) {
+      break;
+    }
+    index--;
+  }
+  GetTextIndexed(ds18x20_types, sizeof(ds18x20_types), index, kDs18x20Types);
+  if (ds18x20_sensors > 1) {
+    snprintf_P(ds18x20_types, sizeof(ds18x20_types), PSTR("%s-%d"), ds18x20_types, sensor +1);
+  }
+}
+
+/********************************************************************************************/
+
+void Ds18x20EverySecond()
+{
+  if (uptime &1) {
+    // 2mS
+    Ds18x20Convert();          // Start conversion, takes up to one second
+  } else {
+    for (uint8_t i = 0; i < ds18x20_sensors; i++) {
+      // 12mS per device
+      if (!Ds18x20Read(i)) {   // Read temperature
+        Ds18x20Name(i);
+        AddLogMissed(ds18x20_types, ds18x20_sensor[ds18x20_sensor[i].index].valid);
+#ifdef USE_DS18x20_RECONFIGURE
+        if (!ds18x20_sensor[ds18x20_sensor[i].index].valid) {
+          memset(&ds18x20_sensor, 0, sizeof(ds18x20_sensor));
+          Ds18x20Init();       // Re-configure
+        }
+#endif  // USE_DS18x20_RECONFIGURE
+      }
+    }
+  }
+}
+
 void Ds18x20Show(boolean json)
 {
   char temperature[10];
-  char stemp[12];
-  float t;
-  bool domoticz_flag = true;
 
   for (uint8_t i = 0; i < ds18x20_sensors; i++) {
-    if (Ds18x20Read(i, t)) {           // Check if read failed
+    uint8_t index = ds18x20_sensor[i].index;
-      dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
 
-      uint8_t index = sizeof(ds18x20_chipids);
+    if (ds18x20_sensor[index].valid) {   // Check for valid temperature
-      while (index) {
+      dtostrfd(ds18x20_sensor[index].temperature, Settings.flag2.temperature_resolution, temperature);
-        if (ds18x20_address[ds18x20_index[i]][0] == ds18x20_chipids[index]) {
+
-          break;
+      Ds18x20Name(i);
-        }
-        index--;
-      }
-      GetTextIndexed(ds18x20_types, sizeof(ds18x20_types), index, kDs18x20Types);
 
-      snprintf_P(stemp, sizeof(stemp), PSTR("%s-%d"), ds18x20_types, i +1);
       if (json) {
         if (1 == ds18x20_sensors) {
           snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_JSON_TEMPERATURE "\":%s}"), mqtt_data, ds18x20_types, temperature);
         } else {
           char address[17];
           for (byte j = 0; j < 6; j++) {
-            sprintf(address+2*j, "%02X", ds18x20_address[ds18x20_index[i]][6-j]);  // Skip sensor type and crc
+            sprintf(address+2*j, "%02X", ds18x20_sensor[index].address[6-j]);  // Skip sensor type and crc
           }
-          snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_JSON_ID "\":\"%s\",\"" D_JSON_TEMPERATURE "\":%s}"), mqtt_data, stemp, address, temperature);
+          snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_JSON_ID "\":\"%s\",\"" D_JSON_TEMPERATURE "\":%s}"), mqtt_data, ds18x20_types, address, temperature);
         }
 #ifdef USE_DOMOTICZ
-        if ((0 == tele_period) && domoticz_flag) {
+        if ((0 == tele_period) && (0 == i)) {
           DomoticzSensor(DZ_TEMP, temperature);
-          domoticz_flag = false;
         }
 #endif  // USE_DOMOTICZ
 #ifdef USE_KNX
         if ((0 == tele_period) && (0 == i)) {
-          KnxSensor(KNX_TEMPERATURE, t);
+          KnxSensor(KNX_TEMPERATURE, ds18x20_sensor[index].temperature);
         }
 #endif  // USE_KNX
 #ifdef USE_WEBSERVER
       } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, (1 == ds18x20_sensors) ? ds18x20_types : stemp, temperature, TempUnit());
+        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, ds18x20_types, temperature, TempUnit());
 #endif  // USE_WEBSERVER
       }
     }
   }
-  Ds18x20Convert();    // Start conversion, takes up to one second
 }
 
 /*********************************************************************************************\
@@ -415,8 +450,8 @@ boolean Xsns05(byte function)
       case FUNC_INIT:
         Ds18x20Init();
         break;
-      case FUNC_PREP_BEFORE_TELEPERIOD:
+      case FUNC_EVERY_SECOND:
-        Ds18x20Convert();    // Start conversion, takes up to one second
+        Ds18x20EverySecond();
         break;
       case FUNC_JSON_APPEND:
         Ds18x20Show(1);

sonoff/xsns_06_dht.ino

@@ -28,7 +28,6 @@
 
 #define DHT_MAX_SENSORS  3
 #define DHT_MAX_RETRY    8
-#define MIN_INTERVAL     2000
 
 uint32_t dht_max_cycles;
 uint8_t dht_data[5];
@@ -63,15 +62,10 @@ int32_t DhtExpectPulse(byte sensor, bool level)
   return count;
 }
 
-void DhtRead(byte sensor)
+boolean DhtRead(byte sensor)
 {
   int32_t cycles[80];
-  uint32_t currenttime = millis();
+  uint8_t error = 0;
-
-  if ((currenttime - Dht[sensor].lastreadtime) < MIN_INTERVAL) {
-    return;
-  }
-  Dht[sensor].lastreadtime = currenttime;
 
   dht_data[0] = dht_data[1] = dht_data[2] = dht_data[3] = dht_data[4] = 0;
 
@@ -99,27 +93,27 @@ void DhtRead(byte sensor)
   delayMicroseconds(10);
   if (-1 == DhtExpectPulse(sensor, LOW)) {
     AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DHT D_TIMEOUT_WAITING_FOR " " D_START_SIGNAL_LOW " " D_PULSE));
-    Dht[sensor].lastresult++;
+    error = 1;
-    return;
   }
-  if (-1 == DhtExpectPulse(sensor, HIGH)) {
+  else if (-1 == DhtExpectPulse(sensor, HIGH)) {
     AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DHT D_TIMEOUT_WAITING_FOR " " D_START_SIGNAL_HIGH " " D_PULSE));
-    Dht[sensor].lastresult++;
+    error = 1;
-    return;
   }
-  for (int i = 0; i < 80; i += 2) {
+  else {
-    cycles[i]   = DhtExpectPulse(sensor, LOW);
+    for (int i = 0; i < 80; i += 2) {
-    cycles[i+1] = DhtExpectPulse(sensor, HIGH);
+      cycles[i]   = DhtExpectPulse(sensor, LOW);
+      cycles[i+1] = DhtExpectPulse(sensor, HIGH);
+    }
   }
   interrupts();
+  if (error) { return false; }
 
   for (int i = 0; i < 40; ++i) {
     int32_t lowCycles  = cycles[2*i];
     int32_t highCycles = cycles[2*i+1];
     if ((-1 == lowCycles) || (-1 == highCycles)) {
       AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DHT D_TIMEOUT_WAITING_FOR " " D_PULSE));
-      Dht[sensor].lastresult++;
+      return false;
-      return;
     }
     dht_data[i/8] <<= 1;
     if (highCycles > lowCycles) {
@@ -127,57 +121,43 @@ void DhtRead(byte sensor)
     }
   }
 
-  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DHT D_RECEIVED " %02X, %02X, %02X, %02X, %02X =? %02X"),
+  uint8_t checksum = (dht_data[0] + dht_data[1] + dht_data[2] + dht_data[3]) & 0xFF;
-    dht_data[0], dht_data[1], dht_data[2], dht_data[3], dht_data[4], (dht_data[0] + dht_data[1] + dht_data[2] + dht_data[3]) & 0xFF);
+  if (dht_data[4] != checksum) {
-  AddLog(LOG_LEVEL_DEBUG);
+    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DHT D_CHECKSUM_FAILURE " %02X, %02X, %02X, %02X, %02X =? %02X"),
-
+      dht_data[0], dht_data[1], dht_data[2], dht_data[3], dht_data[4], checksum);
-  if (dht_data[4] == ((dht_data[0] + dht_data[1] + dht_data[2] + dht_data[3]) & 0xFF)) {
+    AddLog(LOG_LEVEL_DEBUG);
-    Dht[sensor].lastresult = 0;
+    return false;
-  } else {
-    AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DHT D_CHECKSUM_FAILURE));
-    Dht[sensor].lastresult++;
   }
+
+  return true;
 }
 
-boolean DhtReadTempHum(byte sensor, float &t, float &h)
+void DhtReadTempHum(byte sensor)
 {
-  if (NAN == Dht[sensor].h) {
+  if ((NAN == Dht[sensor].h) || (Dht[sensor].lastresult > DHT_MAX_RETRY)) {  // Reset after 8 misses
-    t = NAN;
+    Dht[sensor].t = NAN;
-    h = NAN;
+    Dht[sensor].h = NAN;
-  } else {
-    if (Dht[sensor].lastresult > DHT_MAX_RETRY) {  // Reset after 8 misses
-      Dht[sensor].t = NAN;
-      Dht[sensor].h = NAN;
-    }
-    t = Dht[sensor].t;
-    h = Dht[sensor].h;
   }
-
+  if (DhtRead(sensor)) {
-  DhtRead(sensor);
-  if (!Dht[sensor].lastresult) {
     switch (Dht[sensor].type) {
     case GPIO_DHT11:
-      h = dht_data[0];
+      Dht[sensor].h = dht_data[0];
-      t = dht_data[2];
+      Dht[sensor].t = dht_data[2] + ((float)dht_data[3] * 0.1f);  // Issue #3164
       break;
     case GPIO_DHT22:
     case GPIO_SI7021:
-      h = ((dht_data[0] << 8) | dht_data[1]) * 0.1;
+      Dht[sensor].h = ((dht_data[0] << 8) | dht_data[1]) * 0.1;
-      t = (((dht_data[2] & 0x7F) << 8 ) | dht_data[3]) * 0.1;
+      Dht[sensor].t = (((dht_data[2] & 0x7F) << 8 ) | dht_data[3]) * 0.1;
       if (dht_data[2] & 0x80) {
-        t *= -1;
+        Dht[sensor].t *= -1;
       }
       break;
     }
-    t = ConvertTemp(t);
+    Dht[sensor].t = ConvertTemp(Dht[sensor].t);
-    if (!isnan(t)) {
+    Dht[sensor].lastresult = 0;
-      Dht[sensor].t = t;
+  } else {
-    }
+    Dht[sensor].lastresult++;
-    if (!isnan(h)) {
-      Dht[sensor].h = h;
-    }
   }
-  return (!isnan(t) && !isnan(h));
 }
 
 boolean DhtSetup(byte pin, byte type)
@@ -210,41 +190,46 @@ void DhtInit()
   }
 }
 
+void DhtEverySecond()
+{
+  if (uptime &1) {
+    // <1mS
+    DhtReadPrep();
+  } else {
+    for (byte i = 0; i < dht_sensors; i++) {
+      // DHT11 and AM2301 25mS per sensor, SI7021 5mS per sensor
+      DhtReadTempHum(i);
+    }
+  }
+}
+
 void DhtShow(boolean json)
 {
   char temperature[10];
   char humidity[10];
 
-  byte dsxflg = 0;
   for (byte i = 0; i < dht_sensors; i++) {
-    float t = NAN;
+    dtostrfd(Dht[i].t, Settings.flag2.temperature_resolution, temperature);
-    float h = NAN;
+    dtostrfd(Dht[i].h, Settings.flag2.humidity_resolution, humidity);
-    if (DhtReadTempHum(i, t, h)) {     // Read temperature
-      dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
-      dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
 
-      if (json) {
+    if (json) {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, Dht[i].stype, temperature, humidity);
+      snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, Dht[i].stype, temperature, humidity);
 #ifdef USE_DOMOTICZ
-        if ((0 == tele_period) && !dsxflg) {
+      if ((0 == tele_period) && (0 == i)) {
-          DomoticzTempHumSensor(temperature, humidity);
+        DomoticzTempHumSensor(temperature, humidity);
-          dsxflg++;
-        }
-#endif  // USE_DOMOTICZ
-
-#ifdef USE_KNX
-        if (0 == tele_period) {
-          KnxSensor(KNX_TEMPERATURE, t);
-          KnxSensor(KNX_HUMIDITY, h);
-        }
-#endif  // USE_KNX
-
-#ifdef USE_WEBSERVER
-      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, Dht[i].stype, temperature, TempUnit());
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, Dht[i].stype, humidity);
-#endif  // USE_WEBSERVER
       }
+#endif  // USE_DOMOTICZ
+#ifdef USE_KNX
+      if ((0 == tele_period) && (0 == i)) {
+        KnxSensor(KNX_TEMPERATURE, Dht[i].t);
+        KnxSensor(KNX_HUMIDITY, Dht[i].h);
+      }
+#endif  // USE_KNX
+#ifdef USE_WEBSERVER
+    } else {
+      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, Dht[i].stype, temperature, TempUnit());
+      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, Dht[i].stype, humidity);
+#endif  // USE_WEBSERVER
     }
   }
 }
@@ -264,8 +249,8 @@ boolean Xsns06(byte function)
       case FUNC_INIT:
         DhtInit();
         break;
-      case FUNC_PREP_BEFORE_TELEPERIOD:
+      case FUNC_EVERY_SECOND:
-        DhtReadPrep();
+        DhtEverySecond();
         break;
       case FUNC_JSON_APPEND:
         DhtShow(1);

sonoff/xsns_07_sht1x.ino

@@ -37,6 +37,10 @@ enum {
 uint8_t sht_sda_pin;
 uint8_t sht_scl_pin;
 uint8_t sht_type = 0;
+char sht_types[] = "SHT1X";
+uint8_t sht_valid = 0;
+float sht_temperature = 0;
+float sht_humidity = 0;
 
 boolean ShtReset()
 {
@@ -119,46 +123,32 @@ int ShtReadData()
   return val;
 }
 
-boolean ShtReadTempHum(float &t, float &h)
+boolean ShtRead()
 {
-  float tempRaw;
+  if (sht_valid) { sht_valid--; }
-  float humRaw;
+  if (!ShtReset()) { return false; }
-  float rhLinear;
+  if (!ShtSendCommand(SHT1X_CMD_MEASURE_TEMP)) { return false; }
+  if (!ShtAwaitResult()) { return false; }
+  float tempRaw = ShtReadData();
+  if (!ShtSendCommand(SHT1X_CMD_MEASURE_RH)) { return false; }
+  if (!ShtAwaitResult()) { return false; }
+  float humRaw = ShtReadData();
 
-  t = NAN;
-  h = NAN;
-
-  if (!ShtReset()) {
-    return false;
-  }
-  if (!ShtSendCommand(SHT1X_CMD_MEASURE_TEMP)) {
-    return false;
-  }
-  if (!ShtAwaitResult()) {
-    return false;
-  }
-  tempRaw = ShtReadData();
   // Temperature conversion coefficients from SHT1X datasheet for version 4
   const float d1 = -39.7;  // 3.5V
   const float d2 = 0.01;   // 14-bit
-  t = d1 + (tempRaw * d2);
+  sht_temperature = d1 + (tempRaw * d2);
-  if (!ShtSendCommand(SHT1X_CMD_MEASURE_RH)) {
-    return false;
-  }
-  if (!ShtAwaitResult()) {
-    return false;
-  }
-  humRaw = ShtReadData();
-  // Temperature conversion coefficients from SHT1X datasheet for version 4
   const float c1 = -2.0468;
   const float c2 = 0.0367;
   const float c3 = -1.5955E-6;
   const float t1 = 0.01;
   const float t2 = 0.00008;
-  rhLinear = c1 + c2 * humRaw + c3 * humRaw * humRaw;
+  float rhLinear = c1 + c2 * humRaw + c3 * humRaw * humRaw;
-  h = (t - 25) * (t1 + t2 * humRaw) + rhLinear;
+  sht_humidity = (sht_temperature - 25) * (t1 + t2 * humRaw) + rhLinear;
-  t = ConvertTemp(t);
+  sht_temperature = ConvertTemp(sht_temperature);
-  return (!isnan(t) && !isnan(h));
+
+  sht_valid = SENSOR_MAX_MISS;
+  return true;
 }
 
 /********************************************************************************************/
@@ -169,12 +159,9 @@ void ShtDetect()
     return;
   }
 
-  float t;
-  float h;
-
   sht_sda_pin = pin[GPIO_I2C_SDA];
   sht_scl_pin = pin[GPIO_I2C_SCL];
-  if (ShtReadTempHum(t, h)) {
+  if (ShtRead()) {
     sht_type = 1;
     AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_I2C D_SHT1X_FOUND));
   } else {
@@ -183,38 +170,44 @@ void ShtDetect()
   }
 }
 
+void ShtEverySecond()
+{
+  if (sht_type && !(uptime %4)) {  // Update every 4 seconds
+    // 344mS
+    if (!ShtRead()) {
+      AddLogMissed(sht_types, sht_valid);
+//      if (!sht_valid) { sht_type = 0; }
+    }
+  }
+}
+
 void ShtShow(boolean json)
 {
-  if (sht_type) {
+  if (sht_valid) {
-    float t;
+    char temperature[10];
-    float h;
+    char humidity[10];
 
-    if (ShtReadTempHum(t, h)) {
+    dtostrfd(sht_temperature, Settings.flag2.temperature_resolution, temperature);
-      char temperature[10];
+    dtostrfd(sht_humidity, Settings.flag2.humidity_resolution, humidity);
-      char humidity[10];
 
-      dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
+    if (json) {
-      dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
+      snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, sht_types, temperature, humidity);
-
-      if (json) {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, "SHT1X", temperature, humidity);
 #ifdef USE_DOMOTICZ
-        if (0 == tele_period) DomoticzTempHumSensor(temperature, humidity);
+      if (0 == tele_period) {
-#endif  // USE_DOMOTICZ
+        DomoticzTempHumSensor(temperature, humidity);
-
-#ifdef USE_KNX
-        if (0 == tele_period) {
-          KnxSensor(KNX_TEMPERATURE, t);
-          KnxSensor(KNX_HUMIDITY, h);
-        }
-#endif  // USE_KNX
-
-#ifdef USE_WEBSERVER
-      } else {
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "SHT1X", temperature, TempUnit());
-        snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, "SHT1X", humidity);
-#endif  // USE_WEBSERVER
       }
+#endif  // USE_DOMOTICZ
+#ifdef USE_KNX
+      if (0 == tele_period) {
+        KnxSensor(KNX_TEMPERATURE, sht_temperature);
+        KnxSensor(KNX_HUMIDITY, sht_humidity);
+      }
+#endif  // USE_KNX
+#ifdef USE_WEBSERVER
+    } else {
+      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, sht_types, temperature, TempUnit());
+      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, sht_types, humidity);
+#endif  // USE_WEBSERVER
     }
   }
 }
@@ -231,9 +224,13 @@ boolean Xsns07(byte function)
 
   if (i2c_flg) {
     switch (function) {
-      case FUNC_PREP_BEFORE_TELEPERIOD:
+//      case FUNC_PREP_BEFORE_TELEPERIOD:  // As this is not a real I2C device it may interfere with other sensors
+      case FUNC_INIT:                      // Move detection to restart only removing interference
         ShtDetect();
         break;
+      case FUNC_EVERY_SECOND:
+        ShtEverySecond();
+        break;
       case FUNC_JSON_APPEND:
         ShtShow(1);
         break;

sonoff/xsns_08_htu21.ino

@@ -58,8 +58,11 @@ const char kHtuTypes[] PROGMEM = "HTU21|SI7013|SI7020|SI7021|T/RH?";
 
 uint8_t htu_address;
 uint8_t htu_type = 0;
-uint8_t delay_temp;
+uint8_t htu_delay_temp;
-uint8_t delay_humidity = 50;
+uint8_t htu_delay_humidity = 50;
+uint8_t htu_valid = 0;
+float htu_temperature = 0;
+float htu_humidity = 0;
 char htu_types[7];
 
 uint8_t HtuCheckCrc8(uint16_t data)
@@ -135,87 +138,62 @@ void HtuInit()
   HtuSetResolution(HTU21_RES_RH12_T14);
 }
 
-float HtuReadHumidity(void)
+boolean HtuRead()
 {
   uint8_t  checksum = 0;
   uint16_t sensorval = 0;
-  float    humidity = 0.0;
 
-  Wire.beginTransmission(HTU21_ADDR);
+  if (htu_valid) { htu_valid--; }
-  Wire.write(HTU21_READHUM);
-  if (Wire.endTransmission() != 0) {
-    return 0.0; // In case of error
-  }
-  delay(delay_humidity);                              // Sensor time at max resolution
-
-  Wire.requestFrom(HTU21_ADDR, 3);
-  if (3 <= Wire.available()) {
-    sensorval = Wire.read() << 8;             // MSB
-    sensorval |= Wire.read();                 // LSB
-    checksum = Wire.read();
-  }
-  if (HtuCheckCrc8(sensorval) != checksum) {
-    return 0.0; // Checksum mismatch
-  }
-
-  sensorval ^= 0x02;      // clear status bits
-  humidity = 0.001907 * (float)sensorval - 6;
-
-  if (humidity > 100) {
-    return 100.0;
-  }
-  if (humidity < 0) {
-    return 0.01;
-  }
-
-  return humidity;
-}
-
-float HtuReadTemperature()
-{
-  uint8_t  checksum=0;
-  uint16_t sensorval=0;
-  float t;
 
   Wire.beginTransmission(HTU21_ADDR);
   Wire.write(HTU21_READTEMP);
-  if (Wire.endTransmission() != 0) {
+  if (Wire.endTransmission() != 0) { return false; }           // In case of error
-    return 0.0; // In case of error
+  delay(htu_delay_temp);                                       // Sensor time at max resolution
-  }
-  delay(delay_temp);                          // Sensor time at max resolution
 
   Wire.requestFrom(HTU21_ADDR, 3);
   if (3 == Wire.available()) {
-    sensorval = Wire.read() << 8;         // MSB
+    sensorval = Wire.read() << 8;                              // MSB
-    sensorval |= Wire.read();             // LSB
+    sensorval |= Wire.read();                                  // LSB
     checksum = Wire.read();
   }
-  if (HtuCheckCrc8(sensorval) != checksum) {
+  if (HtuCheckCrc8(sensorval) != checksum) { return false; }   // Checksum mismatch
-    return 0.0; // Checksum mismatch
+
+  htu_temperature = ConvertTemp(0.002681 * (float)sensorval - 46.85);
+
+  Wire.beginTransmission(HTU21_ADDR);
+  Wire.write(HTU21_READHUM);
+  if (Wire.endTransmission() != 0) { return false; }           // In case of error
+  delay(htu_delay_humidity);                                   // Sensor time at max resolution
+
+  Wire.requestFrom(HTU21_ADDR, 3);
+  if (3 <= Wire.available()) {
+    sensorval = Wire.read() << 8;                              // MSB
+    sensorval |= Wire.read();                                  // LSB
+    checksum = Wire.read();
+  }
+  if (HtuCheckCrc8(sensorval) != checksum) { return false; }   // Checksum mismatch
+
+  sensorval ^= 0x02;                                           // clear status bits
+  htu_humidity = 0.001907 * (float)sensorval - 6;
+  if (htu_humidity > 100) { htu_humidity = 100.0; }
+  if (htu_humidity < 0) { htu_humidity = 0.01; }
+
+  if ((0.00 == htu_humidity) && (0.00 == htu_temperature)) {
+    htu_humidity = 0.0;
+  }
+  if ((htu_temperature > 0.00) && (htu_temperature < 80.00)) {
+    htu_humidity = (-0.15) * (25 - htu_temperature) + htu_humidity;
   }
 
-  t = ConvertTemp(0.002681 * (float)sensorval - 46.85);
+  htu_valid = SENSOR_MAX_MISS;
-  return t;
+  return true;
-}
-
-float HtuCompensatedHumidity(float humidity, float temperature)
-{
-  if(humidity == 0.00 && temperature == 0.00) {
-    return 0.0;
-  }
-  if(temperature > 0.00 && temperature < 80.00) {
-    return (-0.15)*(25-temperature)+humidity;
-  }
-  return humidity;
 }
 
 /********************************************************************************************/
 
 void HtuDetect()
 {
-  if (htu_type) {
+  if (htu_type) { return; }
-    return;
-  }
 
   htu_address = HTU21_ADDR;
   htu_type = HtuReadDeviceId();
@@ -224,8 +202,8 @@ void HtuDetect()
     HtuInit();
     switch (htu_type) {
       case HTU21_CHIPID:
-        delay_temp = 50;
+        htu_delay_temp = 50;
-        delay_humidity = 16;
+        htu_delay_humidity = 16;
         break;
       case SI7021_CHIPID:
         index++;  // 3
@@ -233,13 +211,13 @@ void HtuDetect()
         index++;  // 2
       case SI7013_CHIPID:
         index++;  // 1
-        delay_temp = 12;
+        htu_delay_temp = 12;
-        delay_humidity = 23;
+        htu_delay_humidity = 23;
         break;
       default:
         index = 4;
-        delay_temp = 50;
+        htu_delay_temp = 50;
-        delay_humidity = 23;
+        htu_delay_humidity = 23;
     }
     GetTextIndexed(htu_types, sizeof(htu_types), index, kHtuTypes);
     snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, htu_types, htu_address);
@@ -247,31 +225,45 @@ void HtuDetect()
   }
 }
 
+void HtuEverySecond()
+{
+  if (92 == (uptime %100)) {
+    // 1mS
+    HtuDetect();
+  }
+  else if (uptime &1) {
+    // HTU21: 68mS, SI70xx: 37mS
+    if (htu_type) {
+      if (!HtuRead()) {
+        AddLogMissed(htu_types, htu_valid);
+//        if (!htu_valid) { htu_type = 0; }
+      }
+    }
+  }
+}
+
 void HtuShow(boolean json)
 {
-  if (htu_type) {
+  if (htu_valid) {
     char temperature[10];
     char humidity[10];
 
-    float t = HtuReadTemperature();
+    dtostrfd(htu_temperature, Settings.flag2.temperature_resolution, temperature);
-    float h = HtuReadHumidity();
+    dtostrfd(htu_humidity, Settings.flag2.humidity_resolution, humidity);
-    h = HtuCompensatedHumidity(h, t);
-    dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
-    dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
 
     if (json) {
       snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, htu_types, temperature, humidity);
 #ifdef USE_DOMOTICZ
-      if (0 == tele_period) DomoticzTempHumSensor(temperature, humidity);
+      if (0 == tele_period) {
+        DomoticzTempHumSensor(temperature, humidity);
+      }
 #endif  // USE_DOMOTICZ
-
 #ifdef USE_KNX
       if (0 == tele_period) {
-        KnxSensor(KNX_TEMPERATURE, t);
+        KnxSensor(KNX_TEMPERATURE, htu_temperature);
-        KnxSensor(KNX_HUMIDITY, h);
+        KnxSensor(KNX_HUMIDITY, htu_humidity);
       }
 #endif  // USE_KNX
-
 #ifdef USE_WEBSERVER
     } else {
       snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, htu_types, temperature, TempUnit());
@@ -293,9 +285,12 @@ boolean Xsns08(byte function)
 
   if (i2c_flg) {
     switch (function) {
-      case FUNC_PREP_BEFORE_TELEPERIOD:
+      case FUNC_INIT:
         HtuDetect();
         break;
+      case FUNC_EVERY_SECOND:
+        HtuEverySecond();
+        break;
       case FUNC_JSON_APPEND:
         HtuShow(1);
         break;

sonoff/xsns_09_bmp.ino

@@ -45,6 +45,11 @@ uint8_t bmp_type = 0;
 uint8_t bmp_model = 0;
 char bmp_name[7];
 
+uint8_t bmp_valid = 0;
+float bmp_temperature = 0.0;
+float bmp_pressure = 0.0;
+float bmp_humidity = 0.0;
+
 /*********************************************************************************************\
  * BMP085 and BME180
 \*********************************************************************************************/
@@ -78,7 +83,6 @@ int16_t  cal_md;
 uint16_t cal_ac4;
 uint16_t cal_ac5;
 uint16_t cal_ac6;
-int32_t  bmp180_b5 = 0;
 
 boolean Bmp180Calibration()
 {
@@ -113,21 +117,15 @@ boolean Bmp180Calibration()
   return true;
 }
 
-double Bmp180ReadTemperature()
+void Bmp180Read()
 {
   I2cWrite8(bmp_address, BMP180_REG_CONTROL, BMP180_TEMPERATURE);
   delay(5); // 5ms conversion time
   int ut = I2cRead16(bmp_address, BMP180_REG_RESULT);
-  int32_t x1 = (ut - (int32_t)cal_ac6) * ((int32_t)cal_ac5) >> 15;
+  int32_t xt1 = (ut - (int32_t)cal_ac6) * ((int32_t)cal_ac5) >> 15;
-  int32_t x2 = ((int32_t)cal_mc << 11) / (x1 + (int32_t)cal_md);
+  int32_t xt2 = ((int32_t)cal_mc << 11) / (xt1 + (int32_t)cal_md);
-  bmp180_b5 = x1 + x2;
+  int32_t bmp180_b5 = xt1 + xt2;
-
+  bmp_temperature = ((bmp180_b5 + 8) >> 4) / 10.0;
-  return ((bmp180_b5 + 8) >> 4) / 10.0;
-}
-
-double Bmp180ReadPressure()
-{
-  int32_t p;
 
   I2cWrite8(bmp_address, BMP180_REG_CONTROL, BMP180_PRESSURE3); // Highest resolution
   delay(2 + (4 << BMP180_OSS));                                 // 26ms conversion time at ultra high resolution
@@ -146,19 +144,18 @@ double Bmp180ReadPressure()
   uint32_t b4 = ((uint32_t)cal_ac4 * (uint32_t)(x3 + 32768)) >> 15;
   uint32_t b7 = ((uint32_t)up - b3) * (uint32_t)(50000UL >> BMP180_OSS);
 
+  int32_t p;
   if (b7 < 0x80000000) {
     p = (b7 * 2) / b4;
   }
   else {
     p = (b7 / b4) * 2;
   }
-
   x1 = (p >> 8) * (p >> 8);
   x1 = (x1 * 3038) >> 16;
   x2 = (-7357 * p) >> 16;
-
   p += ((x1 + x2 + (int32_t)3791) >> 4);
-  return p / 100.0;  // convert to mbar
+  bmp_pressure = (float)p / 100.0;  // convert to mbar
 }
 
 /*********************************************************************************************\
@@ -215,8 +212,6 @@ struct BME280CALIBDATA
   int8_t   dig_H6;
 } Bme280CalibrationData;
 
-int32_t t_fine;
-
 boolean Bmx280Calibrate()
 {
   //  if (I2cRead8(bmp_address, BMP_REGISTER_CHIPID) != BME280_CHIPID) return false;
@@ -233,20 +228,6 @@ boolean Bmx280Calibrate()
   Bme280CalibrationData.dig_P7 = I2cReadS16_LE(bmp_address, BME280_REGISTER_DIG_P7);
   Bme280CalibrationData.dig_P8 = I2cReadS16_LE(bmp_address, BME280_REGISTER_DIG_P8);
   Bme280CalibrationData.dig_P9 = I2cReadS16_LE(bmp_address, BME280_REGISTER_DIG_P9);
-/*
-  if (BME280_CHIPID == bmp_type) {
-    Bme280CalibrationData.dig_H1 = I2cRead8(bmp_address, BME280_REGISTER_DIG_H1);
-    Bme280CalibrationData.dig_H2 = I2cReadS16_LE(bmp_address, BME280_REGISTER_DIG_H2);
-    Bme280CalibrationData.dig_H3 = I2cRead8(bmp_address, BME280_REGISTER_DIG_H3);
-    Bme280CalibrationData.dig_H4 = (I2cRead8(bmp_address, BME280_REGISTER_DIG_H4) << 4) | (I2cRead8(bmp_address, BME280_REGISTER_DIG_H4 + 1) & 0xF);
-    Bme280CalibrationData.dig_H5 = (I2cRead8(bmp_address, BME280_REGISTER_DIG_H5 + 1) << 4) | (I2cRead8(bmp_address, BME280_REGISTER_DIG_H5) >> 4);
-    Bme280CalibrationData.dig_H6 = (int8_t)I2cRead8(bmp_address, BME280_REGISTER_DIG_H6);
-
-    // Set before CONTROL_meas (DS 5.4.3)
-    I2cWrite8(bmp_address, BME280_REGISTER_CONTROLHUMID, 0x05); // 16x oversampling (Adafruit)
-  }
-  I2cWrite8(bmp_address, BME280_REGISTER_CONTROL, 0xB7);      // 16x oversampling, normal mode (Adafruit)
-*/
   if (BME280_CHIPID == bmp_type) {  // #1051
     Bme280CalibrationData.dig_H1 = I2cRead8(bmp_address, BME280_REGISTER_DIG_H1);
     Bme280CalibrationData.dig_H2 = I2cReadS16_LE(bmp_address, BME280_REGISTER_DIG_H2);
@@ -267,62 +248,42 @@ boolean Bmx280Calibrate()
   return true;
 }
 
-double Bme280ReadTemperature(void)
+void Bme280Read(void)
 {
-  int32_t var1;
-  int32_t var2;
-
   int32_t adc_T = I2cRead24(bmp_address, BME280_REGISTER_TEMPDATA);
   adc_T >>= 4;
 
-  var1 = ((((adc_T >> 3) - ((int32_t)Bme280CalibrationData.dig_T1 << 1))) * ((int32_t)Bme280CalibrationData.dig_T2)) >> 11;
+  int32_t vart1 = ((((adc_T >> 3) - ((int32_t)Bme280CalibrationData.dig_T1 << 1))) * ((int32_t)Bme280CalibrationData.dig_T2)) >> 11;
-  var2 = (((((adc_T >> 4) - ((int32_t)Bme280CalibrationData.dig_T1)) * ((adc_T >> 4) - ((int32_t)Bme280CalibrationData.dig_T1))) >> 12) *
+  int32_t vart2 = (((((adc_T >> 4) - ((int32_t)Bme280CalibrationData.dig_T1)) * ((adc_T >> 4) - ((int32_t)Bme280CalibrationData.dig_T1))) >> 12) *
     ((int32_t)Bme280CalibrationData.dig_T3)) >> 14;
-  t_fine = var1 + var2;
+  int32_t t_fine = vart1 + vart2;
-  double T = (t_fine * 5 + 128) >> 8;
+  float T = (t_fine * 5 + 128) >> 8;
-  return T / 100.0;
+  bmp_temperature = T / 100.0;
-}
-
-double Bme280ReadPressure(void)
-{
-  int64_t var1;
-  int64_t var2;
-  int64_t p;
-
-  // Must be done first to get the t_fine variable set up
-  //  Bme280ReadTemperature();
 
   int32_t adc_P = I2cRead24(bmp_address, BME280_REGISTER_PRESSUREDATA);
   adc_P >>= 4;
 
-  var1 = ((int64_t)t_fine) - 128000;
+  int64_t var1 = ((int64_t)t_fine) - 128000;
-  var2 = var1 * var1 * (int64_t)Bme280CalibrationData.dig_P6;
+  int64_t var2 = var1 * var1 * (int64_t)Bme280CalibrationData.dig_P6;
   var2 = var2 + ((var1 * (int64_t)Bme280CalibrationData.dig_P5) << 17);
   var2 = var2 + (((int64_t)Bme280CalibrationData.dig_P4) << 35);
   var1 = ((var1 * var1 * (int64_t)Bme280CalibrationData.dig_P3) >> 8) + ((var1 * (int64_t)Bme280CalibrationData.dig_P2) << 12);
   var1 = (((((int64_t)1) << 47) + var1)) * ((int64_t)Bme280CalibrationData.dig_P1) >> 33;
   if (0 == var1) {
-    return 0; // avoid exception caused by division by zero
+    return; // avoid exception caused by division by zero
   }
-  p = 1048576 - adc_P;
+  int64_t p = 1048576 - adc_P;
   p = (((p << 31) - var2) * 3125) / var1;
   var1 = (((int64_t)Bme280CalibrationData.dig_P9) * (p >> 13) * (p >> 13)) >> 25;
   var2 = (((int64_t)Bme280CalibrationData.dig_P8) * p) >> 19;
   p = ((p + var1 + var2) >> 8) + (((int64_t)Bme280CalibrationData.dig_P7) << 4);
-  return (double)p / 25600.0;
+  bmp_pressure = (float)p / 25600.0;
-}
 
-double Bme280ReadHumidity(void)
+  if (BMP280_CHIPID == bmp_type) { return; }
-{
-  int32_t v_x1_u32r;
-
-  // Must be done first to get the t_fine variable set up
-  //  Bme280ReadTemperature();
 
   int32_t adc_H = I2cRead16(bmp_address, BME280_REGISTER_HUMIDDATA);
 
-  v_x1_u32r = (t_fine - ((int32_t)76800));
+  int32_t v_x1_u32r = (t_fine - ((int32_t)76800));
-
   v_x1_u32r = (((((adc_H << 14) - (((int32_t)Bme280CalibrationData.dig_H4) << 20) -
     (((int32_t)Bme280CalibrationData.dig_H5) * v_x1_u32r)) + ((int32_t)16384)) >> 15) *
     (((((((v_x1_u32r * ((int32_t)Bme280CalibrationData.dig_H6)) >> 10) *
@@ -332,8 +293,8 @@ double Bme280ReadHumidity(void)
     ((int32_t)Bme280CalibrationData.dig_H1)) >> 4));
   v_x1_u32r = (v_x1_u32r < 0) ? 0 : v_x1_u32r;
   v_x1_u32r = (v_x1_u32r > 419430400) ? 419430400 : v_x1_u32r;
-  double h = (v_x1_u32r >> 12);
+  float h = (v_x1_u32r >> 12);
-  return h / 1024.0;
+  bmp_humidity = h / 1024.0;
 }
 
 #ifdef USE_BME680
@@ -345,17 +306,14 @@ double Bme280ReadHumidity(void)
 
 struct bme680_dev gas_sensor;
 
+float bmp_gas_resistance = 0.0;
+uint8_t bme680_state = 0;
+
 static void BmeDelayMs(uint32_t ms)
 {
   delay(ms);
 }
 
-uint8_t bme680_state = 0;
-float bme680_temperature;
-float bme680_pressure;
-float bme680_humidity;
-float bme680_gas_resistance;
-
 boolean Bme680Init()
 {
   gas_sensor.dev_id = bmp_address;
@@ -400,7 +358,7 @@ boolean Bme680Init()
   return true;
 }
 
-void Bme680PerformReading()
+void Bme680Read()
 {
   int8_t rslt = BME680_OK;
 
@@ -424,14 +382,14 @@ void Bme680PerformReading()
       rslt = bme680_get_sensor_data(&data, &gas_sensor);
       if (rslt != BME680_OK) { return; }
 
-      bme680_temperature = data.temperature / 100.0;
+      bmp_temperature = data.temperature / 100.0;
-      bme680_humidity = data.humidity / 1000.0;
+      bmp_humidity = data.humidity / 1000.0;
-      bme680_pressure = data.pressure;
+      bmp_pressure = data.pressure / 100.0;
       /* Avoid using measurements from an unstable heating setup */
       if (data.status & BME680_GASM_VALID_MSK) {
-        bme680_gas_resistance = data.gas_resistance;
+        bmp_gas_resistance = data.gas_resistance / 1000.0;
       } else {
-        bme680_gas_resistance = 0;
+        bmp_gas_resistance = 0;
       }
     }
   }
@@ -444,9 +402,7 @@ void Bme680PerformReading()
 
 void BmpDetect()
 {
-  if (bmp_type) {
+  if (bmp_type) { return; }
-    return;
-  }
 
   for (byte i = 0; i < sizeof(bmp_addresses); i++) {
     bmp_address = bmp_addresses[i];
@@ -456,22 +412,21 @@ void BmpDetect()
     }
   }
   if (bmp_type) {
+    bmp_model = 0;
     boolean success = false;
     switch (bmp_type) {
       case BMP180_CHIPID:
         success = Bmp180Calibration();
         break;
-      case BMP280_CHIPID:
-        bmp_model = 1;  // 1
-        success = Bmx280Calibrate();
-        break;
       case BME280_CHIPID:
-        bmp_model = 2;  // 2
+        bmp_model++;  // 2
+      case BMP280_CHIPID:
+        bmp_model++;  // 1
         success = Bmx280Calibrate();
         break;
 #ifdef USE_BME680
       case BME680_CHIPID:
-        bmp_model = 3;  // 2
+        bmp_model = 3;  // 3
         success = Bme680Init();
         break;
 #endif  // USE_BME680
@@ -487,54 +442,57 @@ void BmpDetect()
   }
 }
 
+void BmpRead()
+{
+  switch (bmp_type) {
+    case BMP180_CHIPID:
+      Bmp180Read();
+      break;
+    case BMP280_CHIPID:
+    case BME280_CHIPID:
+      Bme280Read();
+      break;
+#ifdef USE_BME680
+    case BME680_CHIPID:
+      Bme680Read();
+      break;
+#endif  // USE_BME680
+  }
+  if (bmp_temperature != 0.0) { bmp_temperature = ConvertTemp(bmp_temperature); }
+}
+
+void BmpEverySecond()
+{
+  if (91 == (uptime %100)) {
+    // 1mS
+    BmpDetect();
+  }
+  else {
+    // 2mS
+    BmpRead();
+  }
+}
+
 void BmpShow(boolean json)
 {
   if (bmp_type) {
-    float t = 0.0;
-    float p = 0.0;
-    float h = 0.0;
-    float g = 0.0;
     float bmp_sealevel = 0.0;
-
-    switch (bmp_type) {
-      case BMP180_CHIPID:
-        t = Bmp180ReadTemperature();
-        p = Bmp180ReadPressure();
-        break;
-      case BME280_CHIPID:
-        h = Bme280ReadHumidity();
-      case BMP280_CHIPID:
-        t = Bme280ReadTemperature();
-        p = Bme280ReadPressure();
-        break;
-#ifdef USE_BME680
-      case BME680_CHIPID:
-        t = bme680_temperature;
-        p = bme680_pressure / 100.0;
-        h = bme680_humidity;
-        g = bme680_gas_resistance / 1000.0;
-        break;
-#endif  // USE_BME680
-    }
-    if (t != 0.0) {
-      t = ConvertTemp(t);
-    }
-    if (p != 0.0) {
-//    bmp_sealevel = p / pow(1.0 - ((float)Settings.altitude / 44330.0), 5.255);  // pow adds 8k to the code
-      bmp_sealevel = (p / FastPrecisePow(1.0 - ((float)Settings.altitude / 44330.0), 5.255)) - 21.6;
-    }
-
     char temperature[10];
-    dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
     char pressure[10];
-    dtostrfd(p, Settings.flag2.pressure_resolution, pressure);
     char sea_pressure[10];
-    dtostrfd(bmp_sealevel, Settings.flag2.pressure_resolution, sea_pressure);
     char humidity[10];
-    dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
+
+    if (bmp_pressure != 0.0) {
+      bmp_sealevel = (bmp_pressure / FastPrecisePow(1.0 - ((float)Settings.altitude / 44330.0), 5.255)) - 21.6;
+    }
+
+    dtostrfd(bmp_temperature, Settings.flag2.temperature_resolution, temperature);
+    dtostrfd(bmp_pressure, Settings.flag2.pressure_resolution, pressure);
+    dtostrfd(bmp_sealevel, Settings.flag2.pressure_resolution, sea_pressure);
+    dtostrfd(bmp_humidity, Settings.flag2.humidity_resolution, humidity);
 #ifdef USE_BME680
     char gas_resistance[10];
-    dtostrfd(g, 2, gas_resistance);
+    dtostrfd(bmp_gas_resistance, 2, gas_resistance);
 #endif  // USE_BME680
 
     if (json) {
@@ -555,15 +513,15 @@ void BmpShow(boolean json)
       if (0 == tele_period) {
         DomoticzTempHumPressureSensor(temperature, humidity, pressure);
 #ifdef USE_BME680
-        if (bmp_model >= 3) { DomoticzSensor(DZ_AIRQUALITY, (uint32_t)g); }
+        if (bmp_model >= 3) { DomoticzSensor(DZ_AIRQUALITY, (uint32_t)bmp_gas_resistance); }
 #endif  // USE_BME680
       }
 #endif // USE_DOMOTICZ
 
 #ifdef USE_KNX
       if (0 == tele_period) {
-        KnxSensor(KNX_TEMPERATURE, t);
+        KnxSensor(KNX_TEMPERATURE, bmp_temperature);
-        KnxSensor(KNX_HUMIDITY, h);
+        KnxSensor(KNX_HUMIDITY, bmp_humidity);
       }
 #endif  // USE_KNX
 
@@ -599,13 +557,11 @@ boolean Xsns09(byte function)
 
   if (i2c_flg) {
     switch (function) {
+      case FUNC_INIT:
+        BmpDetect();
+        break;
       case FUNC_EVERY_SECOND:
-        if (tele_period == Settings.tele_period -2) {  // Allow 2 seconds to prepare BME680 readings
+        BmpEverySecond();
-          BmpDetect();
-        }
-#ifdef USE_BME680
-        Bme680PerformReading();
-#endif  // USE_BME680
         break;
       case FUNC_JSON_APPEND:
         BmpShow(1);

sonoff/xsns_10_bh1750.ino

@@ -33,14 +33,20 @@
 uint8_t bh1750_address;
 uint8_t bh1750_addresses[] = { BH1750_ADDR1, BH1750_ADDR2 };
 uint8_t bh1750_type = 0;
+uint8_t bh1750_valid = 0;
+uint16_t bh1750_illuminance = 0;
+char bh1750_types[] = "BH1750";
 
-uint16_t Bh1750ReadLux()
+bool Bh1750Read()
 {
-  Wire.requestFrom(bh1750_address, (uint8_t)2);
+  if (bh1750_valid) { bh1750_valid--; }
+
+  if (2 != Wire.requestFrom(bh1750_address, (uint8_t)2)) { return false; }
   byte msb = Wire.read();
   byte lsb = Wire.read();
-  uint16_t value = ((msb << 8) | lsb) / 1.2;
+  bh1750_illuminance = ((msb << 8) | lsb) / 1.2;
-  return value;
+  bh1750_valid = SENSOR_MAX_MISS;
+  return true;
 }
 
 /********************************************************************************************/
@@ -57,31 +63,48 @@ void Bh1750Detect()
     Wire.write(BH1750_CONTINUOUS_HIGH_RES_MODE);
     if (!Wire.endTransmission()) {
       bh1750_type = 1;
-      snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "BH1750", bh1750_address);
+      snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, bh1750_types, bh1750_address);
       AddLog(LOG_LEVEL_DEBUG);
       break;
     }
   }
 }
 
+void Bh1750EverySecond()
+{
+  if (90 == (uptime %100)) {
+    // 1mS
+    Bh1750Detect();
+  }
+  else {
+    // 1mS
+    if (bh1750_type) {
+      if (!Bh1750Read()) {
+        AddLogMissed(bh1750_types, bh1750_valid);
+//        if (!bh1750_valid) { bh1750_type = 0; }
+      }
+    }
+  }
+}
+
 #ifdef USE_WEBSERVER
 const char HTTP_SNS_ILLUMINANCE[] PROGMEM =
-  "%s{s}BH1750 " D_ILLUMINANCE "{m}%d " D_UNIT_LUX "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+  "%s{s}%s " D_ILLUMINANCE "{m}%d " D_UNIT_LUX "{e}";  // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
 #endif  // USE_WEBSERVER
 
 void Bh1750Show(boolean json)
 {
-  if (bh1750_type) {
+  if (bh1750_valid) {
-    uint16_t illuminance = Bh1750ReadLux();
-
     if (json) {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"BH1750\":{\"" D_JSON_ILLUMINANCE "\":%d}"), mqtt_data, illuminance);
+      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_JSON_ILLUMINANCE "\":%d}"), mqtt_data, bh1750_types, bh1750_illuminance);
 #ifdef USE_DOMOTICZ
-      if (0 == tele_period) DomoticzSensor(DZ_ILLUMINANCE, illuminance);
+      if (0 == tele_period) {
+        DomoticzSensor(DZ_ILLUMINANCE, bh1750_illuminance);
+      }
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
     } else {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ILLUMINANCE, mqtt_data, illuminance);
+      snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_ILLUMINANCE, mqtt_data, bh1750_types, bh1750_illuminance);
 #endif  // USE_WEBSERVER
     }
   }
@@ -99,9 +122,12 @@ boolean Xsns10(byte function)
 
   if (i2c_flg) {
     switch (function) {
-      case FUNC_PREP_BEFORE_TELEPERIOD:
+      case FUNC_INIT:
         Bh1750Detect();
         break;
+      case FUNC_EVERY_SECOND:
+        Bh1750EverySecond();
+        break;
       case FUNC_JSON_APPEND:
         Bh1750Show(1);
         break;

sonoff/xsns_13_ina219.ino

@@ -93,6 +93,11 @@ uint32_t ina219_cal_value = 0;
 // The following multiplier is used to convert raw current values to mA, taking into account the current config settings
 uint32_t ina219_current_divider_ma = 0;
 
+uint8_t ina219_valid = 0;
+float ina219_voltage = 0;
+float ina219_current = 0;
+char ina219_types[] = "INA219";
+
 bool Ina219SetCalibration(uint8_t mode)
 {
   uint16_t config = 0;
@@ -155,8 +160,20 @@ float Ina219GetCurrent_mA()
   return value;
 }
 
+bool Ina219Read()
+{
+  ina219_voltage = Ina219GetBusVoltage_V() + (Ina219GetShuntVoltage_mV() / 1000);
+  ina219_current = Ina219GetCurrent_mA() / 1000;
+  ina219_valid = SENSOR_MAX_MISS;
+  return true;
+}
+
 /*********************************************************************************************\
  * Command Sensor13
+ *
+ * 0 - Max 32V 2A range
+ * 1 - Max 32V 1A range
+ * 2 - Max 16V 0.4A range
 \*********************************************************************************************/
 
 bool Ina219CommandSensor()
@@ -176,21 +193,36 @@ bool Ina219CommandSensor()
 
 void Ina219Detect()
 {
-  if (ina219_type) {
+  if (ina219_type) { return; }
-    return;
-  }
 
   for (byte i = 0; i < sizeof(ina219_addresses); i++) {
     ina219_address = ina219_addresses[i];
     if (Ina219SetCalibration(Settings.ina219_mode)) {
       ina219_type = 1;
-      snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "INA219", ina219_address);
+      snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, ina219_types, ina219_address);
       AddLog(LOG_LEVEL_DEBUG);
       break;
     }
   }
 }
 
+void Ina219EverySecond()
+{
+  if (87 == (uptime %100)) {
+    // 2mS
+    Ina219Detect();
+  }
+  else {
+    // 3mS
+    if (ina219_type) {
+      if (!Ina219Read()) {
+        AddLogMissed(ina219_types, ina219_valid);
+//        if (!ina219_valid) { ina219_type = 0; }
+      }
+    }
+  }
+}
+
 #ifdef USE_WEBSERVER
 const char HTTP_SNS_INA219_DATA[] PROGMEM = "%s"
   "{s}INA219 " D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"
@@ -200,21 +232,19 @@ const char HTTP_SNS_INA219_DATA[] PROGMEM = "%s"
 
 void Ina219Show(boolean json)
 {
-  if (ina219_type) {
+  if (ina219_valid) {
     char voltage[10];
     char current[10];
     char power[10];
 
-    float fvoltage = Ina219GetBusVoltage_V() + (Ina219GetShuntVoltage_mV() / 1000);
+    float fpower = ina219_voltage * ina219_current;
-    float fcurrent = Ina219GetCurrent_mA() / 1000;
+    dtostrfd(ina219_voltage, Settings.flag2.voltage_resolution, voltage);
-    float fpower = fvoltage * fcurrent;
-    dtostrfd(fvoltage, Settings.flag2.voltage_resolution, voltage);
     dtostrfd(fpower, Settings.flag2.wattage_resolution, power);
-    dtostrfd(fcurrent, Settings.flag2.current_resolution, current);
+    dtostrfd(ina219_current, Settings.flag2.current_resolution, current);
 
     if (json) {
-      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"INA219\":{\"" D_JSON_VOLTAGE "\":%s,\"" D_JSON_CURRENT "\":%s,\"" D_JSON_POWERUSAGE "\":%s}"),
+      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":{\"" D_JSON_VOLTAGE "\":%s,\"" D_JSON_CURRENT "\":%s,\"" D_JSON_POWERUSAGE "\":%s}"),
-        mqtt_data, voltage, current, power);
+        mqtt_data, ina219_types, voltage, current, power);
 #ifdef USE_DOMOTICZ
       if (0 == tele_period) {
         DomoticzSensor(DZ_VOLTAGE, voltage);
@@ -244,9 +274,12 @@ boolean Xsns13(byte function)
           result = Ina219CommandSensor();
         }
         break;
-      case FUNC_PREP_BEFORE_TELEPERIOD:
+      case FUNC_INIT:
         Ina219Detect();
         break;
+      case FUNC_EVERY_SECOND:
+        Ina219EverySecond();
+        break;
       case FUNC_JSON_APPEND:
         Ina219Show(1);
         break;

sonoff/xsns_16_tsl2561.ino

@@ -63,9 +63,9 @@ void Tsl2561Show(boolean json)
        && Tsl2561Util::normalizedLuminosity(gain, exposure, full = scaledFull, ir = scaledIr)
        && Tsl2561Util::milliLux(full, ir, milliLux, Tsl2561::packageCS(id))) {
 
-        snprintf_P(log_data, sizeof(log_data), PSTR(D_ILLUMINANCE " g:%d, e:%d, f:%u, i:%u -> %u.%03u " D_UNIT_LUX),
+//        snprintf_P(log_data, sizeof(log_data), PSTR(D_ILLUMINANCE " g:%d, e:%d, f:%u, i:%u -> %u.%03u " D_UNIT_LUX),
-          gain, exposure, full, ir, milliLux/1000, milliLux%1000);
+//          gain, exposure, full, ir, milliLux/1000, milliLux%1000);
-        AddLog(LOG_LEVEL_DEBUG);
+//        AddLog(LOG_LEVEL_DEBUG);
 
         if (json) {
           snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"TSL2561\":{\"" D_JSON_ILLUMINANCE "\":%u.%03u}"),

sonoff/xsns_22_sr04.ino

@@ -25,8 +25,6 @@
  * References:
  * - https://www.dfrobot.com/wiki/index.php/Weather-proof_Ultrasonic_Sensor_SKU_:_SEN0207
 \*********************************************************************************************/
-#define max(a,b) ((a)>(b)?(a):(b))
-#define min(a,b) ((a)<(b)?(a):(b))
 
 uint8_t sr04_echo_pin = 0;
 uint8_t sr04_trig_pin = 0;
@@ -42,7 +40,7 @@ uint8_t sr04_trig_pin = 0;
 #define PING_OVERHEAD         5
 
 // Conversion from uS to distance (round result to nearest cm or inch).
-#define EchoConvert(echoTime, conversionFactor) (max(((unsigned int)echoTime + conversionFactor / 2) / conversionFactor, (echoTime ? 1 : 0)))
+#define EchoConvert(echoTime, conversionFactor) (tmax(((unsigned int)echoTime + conversionFactor / 2) / conversionFactor, (echoTime ? 1 : 0)))
 
 /********************************************************************************************/
 
@@ -74,7 +72,7 @@ uint16_t Sr04Ping(uint16_t max_cm_distance)
   uint16_t duration = 0;
   uint16_t maxEchoTime;
 
-  maxEchoTime = min(max_cm_distance + 1, (uint16_t) MAX_SENSOR_DISTANCE + 1) * US_ROUNDTRIP_CM;
+  maxEchoTime = tmin(max_cm_distance + 1, (uint16_t) MAX_SENSOR_DISTANCE + 1) * US_ROUNDTRIP_CM;
 
   /* The following trigPin/echoPin cycle is used to determine the
      distance of the nearest object by bouncing soundwaves off of it. */

sonoff/xsns_28_tm1638.ino

@@ -35,19 +35,20 @@ uint8_t tm1638_clock_pin = 0;
 uint8_t tm1638_data_pin = 0;
 uint8_t tm1638_strobe_pin = 0;
 uint8_t tm1638_displays = 8;
-uint8_t tm1638_active_display = 0;
+uint8_t tm1638_active_display = 1;
 uint8_t tm1638_intensity = 0;
+uint8_t tm1638_state = 0;
 
 /*********************************************************************************************\
  * Pieces from library https://github.com/rjbatista/tm1638-library
+ *    and from library https://github.com/MartyMacGyver/TM1638-demos-and-examples
 \*********************************************************************************************/
 
 void Tm16XXSend(byte data)
 {
-  for (int i = 0; i < 8; i++) {
+	for (uint8_t i = 0; i < 8; i++) {
+    digitalWrite(tm1638_data_pin, !!(data & (1 << i)));
     digitalWrite(tm1638_clock_pin, LOW);
-    digitalWrite(tm1638_data_pin, data & 1 ? HIGH : LOW);
-    data >>= 1;
     delayMicroseconds(TM1638_CLOCK_DELAY);
     digitalWrite(tm1638_clock_pin, HIGH);
   }
@@ -77,11 +78,10 @@ byte Tm16XXReceive()
   pinMode(tm1638_data_pin, INPUT);
   digitalWrite(tm1638_data_pin, HIGH);
 
-  for (int i = 0; i < 8; i++) {
+  for (uint8_t i = 0; i < 8; ++i) {
-    temp >>= 1;
     digitalWrite(tm1638_clock_pin, LOW);
     delayMicroseconds(TM1638_CLOCK_DELAY);
-    if (digitalRead(tm1638_data_pin)) { temp |= 0x80; }
+    temp |= digitalRead(tm1638_data_pin) << i;
     digitalWrite(tm1638_clock_pin, HIGH);
   }
 
@@ -155,7 +155,7 @@ void TmInit()
     digitalWrite(tm1638_clock_pin, HIGH);
 
     Tm16XXSendCommand(0x40);
-    Tm16XXSendCommand(0x80 | (tm1638_active_display ? 8 : 0) | min(7, tm1638_intensity));
+    Tm16XXSendCommand(0x80 | (tm1638_active_display ? 8 : 0) | tmin(7, tm1638_intensity));
 
     digitalWrite(tm1638_strobe_pin, LOW);
     Tm16XXSend(0xC0);
@@ -165,25 +165,32 @@ void TmInit()
     digitalWrite(tm1638_strobe_pin, HIGH);
 
     tm1638_type = 1;
+    tm1638_state = 1;
   }
 }
 
 void TmLoop()
 {
-  byte buttons = Tm1638GetButtons();
+  if (tm1638_state) {
-  for (byte i = 0; i < MAX_SWITCHES; i++) {
+    byte buttons = Tm1638GetButtons();
-    virtualswitch[i] = buttons &1;
+    for (byte i = 0; i < MAX_SWITCHES; i++) {
-    byte color = (virtualswitch[i]) ? TM1638_COLOR_RED : TM1638_COLOR_NONE;
+      virtualswitch[i] = (buttons &1) ^1;
-    Tm1638SetLED(color, i);
+      byte color = (virtualswitch[i]) ? TM1638_COLOR_NONE : TM1638_COLOR_RED;
-    buttons >>= 1;
+      Tm1638SetLED(color, i);
+      buttons >>= 1;
+    }
+    SwitchHandler(1);
   }
-  SwitchHandler(1);
 }
 
+/*
 void TmShow(boolean json)
 {
+  if (tm1638_type) {
 
+  }
 }
+*/
 
 /*********************************************************************************************\
  * Interface

sonoff/xsns_29_mcp230xx.ino

@@ -0,0 +1,467 @@
+/*
+  xsns_29_mcp230xx.ino - Support for I2C MCP23008/MCP23017 GPIO Expander (INPUT ONLY!)
+
+  Copyright (C) 2018  Andre Thomas and Theo Arends
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef USE_I2C
+#ifdef USE_MCP230xx
+
+/*********************************************************************************************\
+   MCP23008/17 - I2C GPIO EXPANDER
+
+   Docs at https://www.microchip.com/wwwproducts/en/MCP23008
+           https://www.microchip.com/wwwproducts/en/MCP23017
+
+   I2C Address: 0x20 - 0x27
+  \*********************************************************************************************/
+
+#define XSNS_29                   29
+
+#define MCP230xx_ADDRESS1         0x20
+#define MCP230xx_ADDRESS2         0x21
+#define MCP230xx_ADDRESS3         0x22
+#define MCP230xx_ADDRESS4         0x23
+#define MCP230xx_ADDRESS5         0x24
+#define MCP230xx_ADDRESS6         0x25
+#define MCP230xx_ADDRESS7         0x26
+#define MCP230xx_ADDRESS8         0x27
+
+/*
+   Default register locations for MCP23008 - They change for MCP23017 in default bank mode
+*/
+
+uint8_t MCP230xx_IODIR          = 0x00;
+uint8_t MCP230xx_GPINTEN        = 0x02;
+uint8_t MCP230xx_IOCON          = 0x05;
+uint8_t MCP230xx_GPPU           = 0x06;
+uint8_t MCP230xx_INTF           = 0x07;
+uint8_t MCP230xx_INTCAP         = 0x08;
+uint8_t MCP230xx_GPIO           = 0x09;
+
+uint8_t mcp230xx_type = 0;
+uint8_t mcp230xx_address;
+uint8_t mcp230xx_addresses[] = { MCP230xx_ADDRESS1, MCP230xx_ADDRESS2, MCP230xx_ADDRESS3, MCP230xx_ADDRESS4, MCP230xx_ADDRESS5, MCP230xx_ADDRESS6, MCP230xx_ADDRESS7, MCP230xx_ADDRESS8 };
+uint8_t mcp280xx_pincount = 0;
+
+const char MCP230XX_SENSOR_RESPONSE[] PROGMEM = "{\"Sensor29\":{\"D\":%i,\"MODE\":%i,\"PULL-UP\":%i}}";
+
+#ifdef USE_WEBSERVER
+#ifdef USE_MCP230xx_displaymain
+const char HTTP_SNS_MCP230xx_GPIO[] PROGMEM = "%s{s}MCP230XX D%d{m}%d{e}";                               // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+#endif // USE_MCP230xx_displaymain
+#ifdef USE_MCP230xx_webconfig
+const char MCP230XX_OPTION_SELECTED[] PROGMEM = " selected";
+const char MCP230XX_OPTION_BLANK[] PROGMEM = "";
+const char MCP230XX_OPTION_CHECKED[] PROGMEM = " checked";
+const char HTTP_FORM_I2C_MCP230XX_T[] PROGMEM = "<table>";
+const char HTTP_FORM_I2C_MCP230XX_TE[] PROGMEM = "</table>";
+
+const char HTTP_FORM_MCP230XX[] PROGMEM =
+  "<fieldset><legend><b>&nbsp;MCP230xx settings &nbsp;</b></legend><form method='post' action='sv'><input id='w' name='w' value='8' hidden>";
+
+const char HTTP_FORM_I2C_MCP230XX[] PROGMEM =
+  "<tr><td nowrap>{b0 </b> <br/></td><td nowrap><select id='{b1' name='{b1'>"
+  "<option value='0'{s0>Disabled</option>"
+  "<option value='1'{s1>Input</option>"
+  "<option value='2'{s2>Input (Int on Change)</option>"
+  "<option value='3'{s3>Input (Int when Low)</option>"
+  "<option value='4'{s4>Input (Int when High)</option>"
+  "</select></td>"
+  "<td nowrap>Enable Pullup</td>"
+  "<td nowrap><input type=checkbox name=epu{b1 value=1{b2></input></td>"
+  "</tr>";
+
+void HandleMCP230xxConfiguration()
+{
+  if (HttpUser()) {
+    return;
+  }
+
+  AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_MCP230XX));
+
+  String page = FPSTR(HTTP_HEAD);
+
+  page.replace("{v}", FPSTR(D_CONFIGURE_MCP230XX));
+
+  page += FPSTR(HTTP_HEAD_STYLE);
+  page += FPSTR(HTTP_FORM_MCP230XX);
+
+  page += FPSTR(HTTP_FORM_I2C_MCP230XX_T);
+
+  for (uint8_t idx = 0; idx < mcp280xx_pincount; idx++) {
+    page += FPSTR(HTTP_FORM_I2C_MCP230XX);
+    page.replace("{b0", "MCP230XX D" + String(idx));
+    page.replace("{b1", "D" + String(idx));
+
+    // determine correct dropdown state
+
+    uint8_t bitsetting = 0;                           // Default to disabled
+    if (Settings.mcp230xx_config[idx].enable) {
+      bitsetting = 1;                                 // Default to normal enable (floating without interrupt)
+      if (Settings.mcp230xx_config[idx].inten) {      // Int choice
+        bitsetting = 2;                               // Default to INT on Change (LOW to HIGH, and HIGH to LOW)
+        if (Settings.mcp230xx_config[idx].intmode) {    // On comparison
+          bitsetting = 3;                               // On comparison default to LOW
+          if (Settings.mcp230xx_config[idx].intcomp) {
+            bitsetting = 4;                             // On comparison default to HIGH
+          }
+        }
+      }
+    }
+    switch (bitsetting) {
+      case 0 : page.replace("{s0", FPSTR(MCP230XX_OPTION_SELECTED)); break;
+      case 1 : page.replace("{s1", FPSTR(MCP230XX_OPTION_SELECTED)); break;
+      case 2 : page.replace("{s2", FPSTR(MCP230XX_OPTION_SELECTED)); break;
+      case 3 : page.replace("{s3", FPSTR(MCP230XX_OPTION_SELECTED)); break;
+      case 4 : page.replace("{s4", FPSTR(MCP230XX_OPTION_SELECTED)); break;
+    }
+    // replace remaining unselected options - if one was replaced above it will be ignored
+    page.replace("{s0", FPSTR(MCP230XX_OPTION_BLANK));
+    page.replace("{s1", FPSTR(MCP230XX_OPTION_BLANK));
+    page.replace("{s2", FPSTR(MCP230XX_OPTION_BLANK));
+    page.replace("{s3", FPSTR(MCP230XX_OPTION_BLANK));
+    page.replace("{s4", FPSTR(MCP230XX_OPTION_BLANK));
+
+    if (Settings.mcp230xx_config[idx].pullup) {
+      page.replace("{b2", FPSTR(MCP230XX_OPTION_CHECKED));
+    } else {
+      page.replace("{b2", FPSTR(MCP230XX_OPTION_BLANK));
+    }
+  }
+
+  page += FPSTR(HTTP_FORM_I2C_MCP230XX_TE);
+
+  page += FPSTR(HTTP_FORM_END);
+  page += FPSTR(HTTP_BTN_CONF);
+  ShowPage(page);
+}
+
+void MCP230xx_SaveSettings()
+{
+  char stemp[8];
+  for (uint8_t idx = 0; idx < mcp280xx_pincount; idx++) {
+    snprintf_P(stemp, sizeof(stemp), PSTR("D%d"), idx);
+    uint8_t _pinvalue = (!strlen(WebServer->arg(stemp).c_str() )) ?  0 : atoi(WebServer->arg(stemp).c_str() );
+    if (_pinvalue) {
+      Settings.mcp230xx_config[idx].enable = 1;
+      if (_pinvalue >= 2) {
+        Settings.mcp230xx_config[idx].inten = 1;
+        if (_pinvalue >= 3) {
+          Settings.mcp230xx_config[idx].intmode = 1;
+          if (_pinvalue >= 4) {
+            Settings.mcp230xx_config[idx].intcomp = 1;
+          } else {
+            Settings.mcp230xx_config[idx].intcomp = 0;
+          }
+        } else {
+          Settings.mcp230xx_config[idx].intmode = 0;
+          Settings.mcp230xx_config[idx].intcomp = 0;
+        }
+      } else {
+        Settings.mcp230xx_config[idx].inten = 0;
+        Settings.mcp230xx_config[idx].intmode = 0;
+        Settings.mcp230xx_config[idx].intcomp = 0;
+      }
+    } else {
+      Settings.mcp230xx_config[idx].enable = 0;
+      Settings.mcp230xx_config[idx].inten = 0;
+      Settings.mcp230xx_config[idx].intmode = 0;
+      Settings.mcp230xx_config[idx].intcomp = 0;
+    }
+    Settings.mcp230xx_config[idx].b5 = 0;
+    Settings.mcp230xx_config[idx].b6 = 0;
+    Settings.mcp230xx_config[idx].b7 = 0;
+    if (Settings.mcp230xx_config[idx].enable) {
+      snprintf_P(stemp, sizeof(stemp), PSTR("epuD%d"), idx);
+      Settings.mcp230xx_config[idx].pullup = (!strlen(WebServer->arg(stemp).c_str() )) ?  0 : atoi(WebServer->arg(stemp).c_str() );
+    } else {
+      Settings.mcp230xx_config[idx].pullup = 0;
+    }
+  }
+  MCP230xx_ApplySettings();
+}
+
+#endif // USE_MCP230xx_webconfig
+
+#endif // USE_WEBSERVER
+
+uint8_t MCP230xx_Type(void) {
+  return mcp230xx_type;
+}
+
+uint8_t MCP230xx_readGPIO(uint8_t port) {
+  return I2cRead8(mcp230xx_address, MCP230xx_GPIO + port);
+}
+
+void MCP230xx_ApplySettings(void) {
+  uint8_t reg_gppu = 0;
+  uint8_t reg_gpinten = 0;
+  for (uint8_t idx = 0; idx < 8; idx++) {
+    if (Settings.mcp230xx_config[idx].enable) {
+      if (Settings.mcp230xx_config[idx].inten) { // Int is enabled in some form or another
+        reg_gpinten |= (1 << idx);
+      }
+      if (Settings.mcp230xx_config[idx].pullup) {
+        reg_gppu |= (1 << idx);
+      }
+    }
+  }
+  I2cWrite8(mcp230xx_address, MCP230xx_GPPU, reg_gppu);
+  I2cWrite8(mcp230xx_address, MCP230xx_GPINTEN, reg_gpinten);
+  if (mcp230xx_type == 2) { // We have a MCP23017
+    reg_gppu = 0;
+    reg_gpinten = 0;
+    for (uint8_t idx = 8; idx < 16; idx++) {
+      if (Settings.mcp230xx_config[idx].enable) {
+        if (Settings.mcp230xx_config[idx].inten) { // Int is enabled in some form or another
+          reg_gpinten |= (1 << idx - 8);
+        }
+        if (Settings.mcp230xx_config[idx].pullup) {
+          reg_gppu |= (1 << idx - 8);
+        }
+      }
+    }
+    I2cWrite8(mcp230xx_address, MCP230xx_GPPU + 1, reg_gppu);
+    I2cWrite8(mcp230xx_address, MCP230xx_GPINTEN + 1, reg_gpinten);
+  }
+}
+
+void MCP230xx_Detect()
+{
+  uint8_t buffer;
+
+  if (mcp230xx_type) {
+    return;
+  }
+
+  for (byte i = 0; i < sizeof(mcp230xx_addresses); i++) {
+    mcp230xx_address = mcp230xx_addresses[i];
+    I2cWrite8(mcp230xx_address, MCP230xx_IOCON, 0x80); // attempt to set bank mode - this will only work on MCP23017, so its the best way to detect the different chips 23008 vs 23017
+    if (I2cValidRead8(&buffer, mcp230xx_address, MCP230xx_IOCON)) {
+      if (buffer == 0x00) {
+        mcp230xx_type = 1; // We have a MCP23008
+        snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "MCP23008", mcp230xx_address);
+        AddLog(LOG_LEVEL_DEBUG);
+        mcp280xx_pincount = 8;
+        MCP230xx_ApplySettings();
+      } else {
+        if (buffer == 0x80) {
+          mcp230xx_type = 2; // We have a MCP23017
+          snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "MCP23017", mcp230xx_address);
+          AddLog(LOG_LEVEL_DEBUG);
+          mcp280xx_pincount = 16;
+          // Reset bank mode to 0
+          I2cWrite8(mcp230xx_address, MCP230xx_IOCON, 0x00);
+          // Update register locations for MCP23017
+          MCP230xx_GPINTEN        = 0x04;
+          MCP230xx_GPPU           = 0x0C;
+          MCP230xx_INTF           = 0x0E;
+          MCP230xx_INTCAP         = 0x10;
+          MCP230xx_GPIO           = 0x12;
+          MCP230xx_ApplySettings();
+        }
+      }
+      break;
+    }
+  }
+}
+
+bool MCP230xx_CheckForInterrupt(void) {
+  uint8_t intf;
+  uint8_t mcp230xx_intcap = 0;
+  uint8_t report_int;
+
+  if (I2cValidRead8(&intf, mcp230xx_address, MCP230xx_INTF)) {
+    if (intf > 0) {
+      if (I2cValidRead8(&mcp230xx_intcap, mcp230xx_address, MCP230xx_INTCAP)) {
+        for (uint8_t intp = 0; intp < 8; intp++) {
+          if ((intf >> intp) & 0x01) { // we know which pin caused interrupt
+            report_int = 0;
+            if (Settings.mcp230xx_config[intp].intmode) { // change on INT
+              if (((mcp230xx_intcap >> intp) & 0x01) == Settings.mcp230xx_config[intp].intcomp) report_int = 1;
+            } else {
+              report_int = 1;
+            }
+            if (report_int) {
+              snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\""), GetDateAndTime(DT_LOCAL).c_str());
+              snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"MCP230XX_INT\":{\"Pin\":\"D%i\", \"State\":%i}"), mqtt_data, intp, ((mcp230xx_intcap >> intp) & 0x01));
+              snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
+              MqttPublishPrefixTopic_P(RESULT_OR_STAT, mqtt_data);
+            }
+          }
+        }
+      }
+    }
+  }
+  if (mcp230xx_type == 2) { // We have a MCP23017 so we need to check the other 8 bits also
+    if (I2cValidRead8(&intf, mcp230xx_address, MCP230xx_INTF+1)) {
+      if (intf > 0) {
+        if (I2cValidRead8(&mcp230xx_intcap, mcp230xx_address, MCP230xx_INTCAP+1)) {
+          for (uint8_t intp = 0; intp < 8; intp++) {
+            if ((intf >> intp) & 0x01) { // we know which pin caused interrupt
+              report_int = 0;
+              if (Settings.mcp230xx_config[intp+8].intmode) { // change on INT
+                if (((mcp230xx_intcap >> intp) & 0x01) == Settings.mcp230xx_config[intp+8].intcomp) report_int = 1;
+              } else {
+                report_int = 1;
+              }
+              if (report_int) {
+                snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\""), GetDateAndTime(DT_LOCAL).c_str());
+                snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"MCP230XX_INT\":{\"Pin\":\"D%i\", \"State\":%i}"), mqtt_data, intp+8, ((mcp230xx_intcap >> intp) & 0x01));
+                snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
+                MqttPublishPrefixTopic_P(RESULT_OR_STAT, mqtt_data);
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+void MCP230xx_Show(boolean json)
+{
+  if (mcp230xx_type) {
+    if (json) {
+      if (mcp230xx_type == 1) {
+        uint8_t gpio = MCP230xx_readGPIO(0);
+        snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"MCP23008\":{\"D0\":%i,\"D1\":%i,\"D2\":%i,\"D3\":%i,\"D4\":%i,\"D5\":%i,\"D6\":%i,\"D7\":%i}"),
+                   mqtt_data,(gpio>>0)&1,(gpio>>1)&1,(gpio>>2)&1,(gpio>>3)&1,(gpio>>4)&1,(gpio>>5)&1,(gpio>>6)&1,(gpio>>7)&1);
+      }
+      if (mcp230xx_type == 2) {
+        uint8_t gpio1 = MCP230xx_readGPIO(0);
+        uint8_t gpio2 = MCP230xx_readGPIO(1);
+        snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"MCP23017\":{\"D0\":%i,\"D1\":%i,\"D2\":%i,\"D3\":%i,\"D4\":%i,\"D5\":%i,\"D6\":%i,\"D7\":%i,\"D8\":%i,\"D9\":%i,\"D10\":%i,\"D11\":%i,\"D12\":%i,\"D13\":%i,\"D14\":%i,\"D15\":%i}"),
+                   mqtt_data, (gpio1>>0)&1,(gpio1>>1)&1,(gpio1>>2)&1,(gpio1>>3)&1,(gpio1>>4)&1,(gpio1>>5)&1,(gpio1>>6)&1,(gpio1>>7)&1,(gpio2>>0)&1,(gpio2>>1)&1,(gpio2>>2)&1,(gpio2>>3)&1,(gpio2>>4)&1,(gpio2>>5)&1,(gpio2>>6)&1,(gpio2>>7)&1);
+      }
+
+#ifdef USE_WEBSERVER
+#ifdef USE_MCP230xx_displaymain
+    } else {
+      uint8_t gpio1 = MCP230xx_readGPIO(0);
+      uint8_t gpio2 = 0;
+      if (mcp230xx_type == 2) {
+        gpio2=MCP230xx_readGPIO(1);
+      }
+      uint16_t gpio = (gpio2 << 8) + gpio1;
+
+      for (uint8_t pin = 0; pin < mcp280xx_pincount; pin++) {
+        if (Settings.mcp230xx_config[pin].enable) {
+          snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_MCP230xx_GPIO, mqtt_data, pin, (gpio>>pin)&1);
+        }
+      }
+#endif // USE_MCP230xx_displaymain
+#endif  // USE_WEBSERVER
+    }
+  }
+}
+
+bool MCP230xx_Command(void) {
+  boolean serviced = true;
+  uint8_t _a, _b = 0;
+  uint8_t pin, pinmode, pullup = 0;
+  String data = XdrvMailbox.data;
+  _a = data.indexOf(",");
+  _b = data.indexOf(",", _a + 1);
+  if (_a < XdrvMailbox.data_len) {
+    if (_b < XdrvMailbox.data_len) {
+      pin = data.substring(0, _a).toInt();
+      pinmode = data.substring(_a+1, _b).toInt();
+      pullup = data.substring(_b+1, XdrvMailbox.data_len).toInt();
+      if (pinmode) {
+        Settings.mcp230xx_config[pin].enable = 1;
+        if (pinmode >= 2) {
+          Settings.mcp230xx_config[pin].inten = 1;
+          if (pinmode >= 3) {
+            Settings.mcp230xx_config[pin].intmode = 1;
+            if (pinmode >= 4) {
+              Settings.mcp230xx_config[pin].intcomp = 1;
+            } else {
+              Settings.mcp230xx_config[pin].intcomp = 0;
+            }
+          } else {
+            Settings.mcp230xx_config[pin].intmode = 0;
+            Settings.mcp230xx_config[pin].intcomp = 0;
+          }
+        } else {
+          Settings.mcp230xx_config[pin].inten = 0;
+          Settings.mcp230xx_config[pin].intmode = 0;
+          Settings.mcp230xx_config[pin].intcomp = 0;
+        }
+      } else {
+        Settings.mcp230xx_config[pin].enable = 0;
+        Settings.mcp230xx_config[pin].inten = 0;
+        Settings.mcp230xx_config[pin].intmode = 0;
+        Settings.mcp230xx_config[pin].intcomp = 0;
+      }
+      Settings.mcp230xx_config[pin].b5 = 0;
+      Settings.mcp230xx_config[pin].b6 = 0;
+      Settings.mcp230xx_config[pin].b7 = 0;
+      if (Settings.mcp230xx_config[pin].enable) {
+        Settings.mcp230xx_config[pin].pullup = pullup;
+      } else {
+        Settings.mcp230xx_config[pin].pullup = 0;
+      }
+      MCP230xx_ApplySettings();
+      snprintf_P(mqtt_data, sizeof(mqtt_data), MCP230XX_SENSOR_RESPONSE,pin,pinmode,pullup);
+    } else {
+      serviced = false;
+    }
+  } else {
+    serviced = false;
+  }
+  return serviced;
+}
+
+/*********************************************************************************************\
+   Interface
+  \*********************************************************************************************/
+
+boolean Xsns29(byte function)
+{
+  boolean result = false;
+
+  if (i2c_flg) {
+    switch (function) {
+      case FUNC_PREP_BEFORE_TELEPERIOD:
+        MCP230xx_Detect();
+        break;
+      case FUNC_EVERY_50_MSECOND:
+        MCP230xx_CheckForInterrupt();
+        break;
+      case FUNC_JSON_APPEND:
+        MCP230xx_Show(1);
+        break;
+      case FUNC_COMMAND:
+        if (XSNS_29 == XdrvMailbox.index) {
+          result = MCP230xx_Command();
+        }
+        break;
+#ifdef USE_WEBSERVER
+#ifdef USE_MCP230xx_displaymain
+      case FUNC_WEB_APPEND:
+        MCP230xx_Show(0);
+        break;
+#endif // USE_MCP230xx_displaymain
+#endif  // USE_WEBSERVER
+    }
+  }
+  return result;
+}
+
+#endif  // USE_MCP230xx
+#endif  // USE_I2C

sonoff/xsns_interface.ino

@@ -146,6 +146,38 @@ boolean (* const xsns_func_ptr[])(byte) PROGMEM = {  // Sensor Function Pointers
   &Xsns32,
 #endif
 
+#ifdef XSNS_33
+  &Xsns33,
+#endif
+
+#ifdef XSNS_34
+  &Xsns34,
+#endif
+
+#ifdef XSNS_35
+  &Xsns35,
+#endif
+
+#ifdef XSNS_36
+  &Xsns36,
+#endif
+
+#ifdef XSNS_37
+  &Xsns37,
+#endif
+
+#ifdef XSNS_38
+  &Xsns38,
+#endif
+
+#ifdef XSNS_39
+  &Xsns39,
+#endif
+
+#ifdef XSNS_40
+  &Xsns40,
+#endif
+
 // Optional user defined sensors in range 91 - 99
 
 #ifdef XSNS_91
@@ -217,10 +249,40 @@ boolean XsnsCall(byte Function)
 {
   boolean result = false;
 
+#ifdef PROFILE_XSNS_EVERY_SECOND
+  uint32_t profile_start_millis = millis();
+#endif  // PROFILE_XSNS_EVERY_SECOND
+
   for (byte x = 0; x < xsns_present; x++) {
+
+#ifdef PROFILE_XSNS_SENSOR_EVERY_SECOND
+  uint32_t profile_start_millis = millis();
+#endif  // PROFILE_XSNS_SENSOR_EVERY_SECOND
+
     result = xsns_func_ptr[x](Function);
+
+#ifdef PROFILE_XSNS_SENSOR_EVERY_SECOND
+  uint32_t profile_millis = millis() - profile_start_millis;
+  if (profile_millis) {
+    if (FUNC_EVERY_SECOND == Function) {
+      snprintf_P(log_data, sizeof(log_data), PSTR("PRF: At %08u XsnsCall %d to Sensor %d took %u mS"), uptime, Function, x, profile_millis);
+      AddLog(LOG_LEVEL_DEBUG);
+    }
+  }
+#endif  // PROFILE_XSNS_SENSOR_EVERY_SECOND
+
     if (result) break;
   }
 
+#ifdef PROFILE_XSNS_EVERY_SECOND
+  uint32_t profile_millis = millis() - profile_start_millis;
+  if (profile_millis) {
+    if (FUNC_EVERY_SECOND == Function) {
+      snprintf_P(log_data, sizeof(log_data), PSTR("PRF: At %08u XsnsCall %d took %u mS"), uptime, Function, profile_millis);
+      AddLog(LOG_LEVEL_DEBUG);
+    }
+  }
+#endif  // PROFILE_XSNS_EVERY_SECOND
+
   return result;
 }

tools/decode-status.py

@@ -79,7 +79,8 @@ a_setoption = [
     "KNX enhancement",
     "RF receive decimal",
     "IR receive decimal",
-    "Enforce HASS light group",""]
+    "Enforce HASS light group",
+    "Do not show Wifi and Mqtt state using Led"]
 
 a_features = [[
     "","","USE_I2C","USE_SPI",
@@ -89,7 +90,7 @@ a_features = [[
     "USE_WS2812_DMA","USE_IR_REMOTE","USE_IR_HVAC","USE_IR_RECEIVE",
     "USE_DOMOTICZ","USE_DISPLAY","USE_HOME_ASSISTANT","USE_SERIAL_BRIDGE",
     "USE_TIMERS","USE_SUNRISE","USE_TIMERS_WEB","USE_RULES",
-    "USE_KNX","","",""
+    "USE_KNX","USE_WPS","USE_SMARTCONFIG",""
     ],[
     "USE_CONFIG_OVERRIDE","BE_MINIMAL","USE_ALL_SENSORS","USE_CLASSIC",
     "USE_KNX_NO_EMULATION","","","",